plucky (3) wadd_wch.3ncurses.gz
NAME
add_wch, wadd_wch, mvadd_wch, mvwadd_wch, echo_wchar, wecho_wchar - add a curses complex character to a
window, possibly advancing the cursor
SYNOPSIS
#include <curses.h>
int add_wch(const cchar_t *wch);
int wadd_wch(WINDOW *win, const cchar_t *wch);
int mvadd_wch(int y, int x, const cchar_t *wch);
int mvwadd_wch(WINDOW *win, int y, int x,
const cchar_t *wch);
int echo_wchar(const cchar_t *wch);
int wecho_wchar(WINDOW *win, const cchar_t *wch);
/* (integer) constants */
/* ... */ WACS_BLOCK;
/* ... */ WACS_BOARD;
/* ... */ WACS_BTEE;
/* ... */ WACS_BULLET;
/* ... */ WACS_CKBOARD;
/* ... */ WACS_DARROW;
/* ... */ WACS_DEGREE;
/* ... */ WACS_DIAMOND;
/* ... */ WACS_HLINE;
/* ... */ WACS_LANTERN;
/* ... */ WACS_LARROW;
/* ... */ WACS_LLCORNER;
/* ... */ WACS_LRCORNER;
/* ... */ WACS_LTEE;
/* ... */ WACS_PLMINUS;
/* ... */ WACS_PLUS;
/* ... */ WACS_RARROW;
/* ... */ WACS_RTEE;
/* ... */ WACS_S1;
/* ... */ WACS_S9;
/* ... */ WACS_TTEE;
/* ... */ WACS_UARROW;
/* ... */ WACS_ULCORNER;
/* ... */ WACS_URCORNER;
/* ... */ WACS_VLINE;
/* extensions */
/* ... */ WACS_GEQUAL;
/* ... */ WACS_LEQUAL;
/* ... */ WACS_NEQUAL;
/* ... */ WACS_PI;
/* ... */ WACS_S3;
/* ... */ WACS_S7;
/* ... */ WACS_STERLING;
/* extensions for thick lines */
/* ... */ WACS_T_BTEE;
/* ... */ WACS_T_HLINE;
/* ... */ WACS_T_LLCORNER;
/* ... */ WACS_T_LRCORNER;
/* ... */ WACS_T_LTEE;
/* ... */ WACS_T_PLUS;
/* ... */ WACS_T_RTEE;
/* ... */ WACS_T_TTEE;
/* ... */ WACS_T_ULCORNER;
/* ... */ WACS_T_URCORNER;
/* ... */ WACS_T_VLINE;
/* extensions for double lines */
/* ... */ WACS_D_BTEE;
/* ... */ WACS_D_HLINE;
/* ... */ WACS_D_LLCORNER;
/* ... */ WACS_D_LRCORNER;
/* ... */ WACS_D_LTEE;
/* ... */ WACS_D_PLUS;
/* ... */ WACS_D_RTEE;
/* ... */ WACS_D_TTEE;
/* ... */ WACS_D_ULCORNER;
/* ... */ WACS_D_URCORNER;
/* ... */ WACS_D_VLINE;
DESCRIPTION
wadd_wch
wadd_wch writes the curses complex character wch to the window win, then may advance the cursor position,
analogously to the standard C library's putwchar(3). ncurses(3NCURSES) describes the variants of this
function.
Construct a curses complex character from a wchar_t with setcchar(3NCURSES). Much behavior depends on
whether the wide characters in wch are spacing or non-spacing; see subsection “Complex Characters” below.
• If wch contains a spacing character, then any character at the cursor is first removed. The complex
character wch, with its attributes and color pair identifier, becomes the base of the active complex
character.
• If wch contains only non-spacing characters, they are combined with the active complex character.
curses ignores its attributes and color pair identifier, and does not advance the cursor.
Further non-spacing characters added with wadd_wch are not written at the new cursor position but combine
with the active complex character until another spacing character is written to the window or the cursor
is moved.
If advancement occurs at the right margin,
• the cursor automatically wraps to the beginning of the next line, then,
• if it was at the bottom of the scrolling region, and if scrollok(3NCURSES) is enabled for win, the
scrolling region scrolls up one line.
If wch is a backspace, carriage return, line feed, or tab, the cursor moves appropriately within the
window.
• Backspace moves the cursor one character left; at the left margin of a window, it does nothing.
• Carriage return moves the cursor to the left margin on the same line of the window.
• Line feed does a clrtoeol(3NCURSES), then advances as if from the right margin.
• Tab advances the cursor to the next tab stop (possibly on the next line); these are placed at every
eighth column by default. Alter the tab interval with the TABSIZE extension; see
curses_variables(3NCURSES).
If wch is any other nonprintable character, it is drawn in printable form using the same convention as
wunctrl(3NCURSES). Calling win_wch(3NCURSES) on the location of a nonprintable character does not return
the character itself, but its wunctrl(3NCURSES) representation.
A cchar_t can be copied from place to place using win_wch(3NCURSES) and wadd_wch. See attr(3NCURSES) for
values of predefined constants that can be usefully “or”ed with characters. A complex character whose
only character component is a wide space, and whose only attribute is WA_NORMAL, is a blank character,
and therefore combines with the background character; see bkgrnd(3NCURSES).
wecho_wchar
echo_wchar and wecho_wchar are equivalent to calling (w)add_wch followed by (w)refresh on stdscr or the
specified window. curses interprets these functions as a hint that only a single (complex) character is
being output; for non-control characters, a considerable performance gain may be enjoyed by employing
them.
Forms-Drawing Characters
curses defines macros starting with WACS_ that can be used with wadd_wch to write line-drawing and other
symbols to the screen. ncurses terms these forms-drawing characters. The ACS default listed below is
used if the acs_chars (acsc) terminfo capability does not define a terminal-specific replacement for it,
or if the terminal and locale configuration requires Unicode to access these characters but the library
is unable to use Unicode. The “acsc char” column corresponds to how the characters are specified in the
acs_chars (acsc) string capability, and the characters in it may appear on the screen if the terminal
type's database entry incorrectly advertises ACS support. The name “ACS” originates in the Alternate
Character Set feature of the DEC VT100 terminal.
Unicode ACS acsc
Symbol Default Default char Glyph Name
──────────────────────────────────────────────────────────────────────────────────────────────────────────
WACS_BLOCK U+25ae # 0 solid square block
WACS_BOARD U+2592 # h board of squares
WACS_BTEE U+2534 + v bottom tee
WACS_BULLET U+00b7 o ~ bullet
WACS_CKBOARD U+2592 : a checker board (stipple)
WACS_DARROW U+2193 v . arrow pointing down
WACS_DEGREE U+00b0 ' f degree symbol
WACS_DIAMOND U+25c6 + ` diamond
WACS_GEQUAL U+2265 > > greater-than-or-equal-to
WACS_HLINE U+2500 - q horizontal line
WACS_LANTERN U+2603 # i lantern symbol
WACS_LARROW U+2190 < , arrow pointing left
WACS_LEQUAL U+2264 < y less-than-or-equal-to
WACS_LLCORNER U+2514 + m lower left-hand corner
WACS_LRCORNER U+2518 + j lower right-hand corner
WACS_LTEE U+2524 + t left tee
WACS_NEQUAL U+2260 ! | not-equal
WACS_PI U+03c0 * { greek pi
WACS_PLMINUS U+00b1 # g plus/minus
WACS_PLUS U+253c + n plus
WACS_RARROW U+2192 > + arrow pointing right
WACS_RTEE U+251c + u right tee
WACS_S1 U+23ba - o scan line 1
WACS_S3 U+23bb - p scan line 3
WACS_S7 U+23bc - r scan line 7
WACS_S9 U+23bd _ s scan line 9
WACS_STERLING U+00a3 f } pound-sterling symbol
WACS_TTEE U+252c + w top tee
WACS_UARROW U+2191 ^ - arrow pointing up
WACS_ULCORNER U+250c + l upper left-hand corner
WACS_URCORNER U+2510 + k upper right-hand corner
WACS_VLINE U+2502 | x vertical line
The ncurses wide API also defines symbols for thick lines (acsc “J” through “N”, “T” through “X”, and
“Q”):
Unicode ASCII acsc
ACS Name Default Default Char Glyph Name
──────────────────────────────────────────────────────────────────────────────────────────────────────────
WACS_T_BTEE U+253b + V thick tee pointing up
WACS_T_HLINE U+2501 - Q thick horizontal line
WACS_T_LLCORNER U+2517 + M thick lower left corner
WACS_T_LRCORNER U+251b + J thick lower right corner
WACS_T_LTEE U+252b + T thick tee pointing right
WACS_T_PLUS U+254b + N thick large plus
WACS_T_RTEE U+2523 + U thick tee pointing left
WACS_T_TTEE U+2533 + W thick tee pointing down
WACS_T_ULCORNER U+250f + L thick upper left corner
WACS_T_URCORNER U+2513 + K thick upper right corner
WACS_T_VLINE U+2503 | X thick vertical line
and for double lines (acsc “A” through “I”, plus “R” and “Y”):
Unicode ASCII acsc
ACS Name Default Default Char Glyph Name
──────────────────────────────────────────────────────────────────────────────────────────────────────────
WACS_D_BTEE U+2569 + H double tee pointing up
WACS_D_HLINE U+2550 - R double horizontal line
WACS_D_LLCORNER U+255a + D double lower left corner
WACS_D_LRCORNER U+255d + A double lower right corner
WACS_D_LTEE U+2560 + F double tee pointing right
WACS_D_PLUS U+256c + E double large plus
WACS_D_RTEE U+2563 + G double tee pointing left
WACS_D_TTEE U+2566 + I double tee pointing down
WACS_D_ULCORNER U+2554 + C double upper left corner
WACS_D_URCORNER U+2557 + B double upper right corner
WACS_D_VLINE U+2551 | Y double vertical line
Unicode's descriptions for these characters differs slightly from ncurses, by introducing the term
“light” (along with less important details). Here are its descriptions for the normal, thick, and double
horizontal lines:
• U+2500 BOX DRAWINGS LIGHT HORIZONTAL
• U+2501 BOX DRAWINGS HEAVY HORIZONTAL
• U+2550 BOX DRAWINGS DOUBLE HORIZONTAL
RETURN VALUE
These functions return OK on success and ERR on failure.
In ncurses, wadd_wch and wecho_wchar return ERR if
• the curses screen has not been initialized,
• (for functions taking a WINDOW pointer argument) win is a null pointer,
• wrapping to a new line is impossible because scrollok(3NCURSES) has not been called on win (or
stdscr, as applicable) when writing to its bottom right location is attempted, or
• it is not possible to add a complete character at the cursor position.
Functions prefixed with “mv” first perform cursor movement and fail if the position (y, x) is outside the
window boundaries.
NOTES
add_wch, mvadd_wch, mvwadd_wch, and echo_wchar may be implemented as macros.
EXTENSIONS
The symbols (WACS_S3, WACS_S7, WACS_LEQUAL, WACS_GEQUAL, WACS_PI, WACS_NEQUAL, and WACS_STERLING) are not
standard. However, many publicly available terminfo entries include acs_chars (acsc) capabilities in
which their key characters (pryz{|}) are embedded, and a second-hand list of their character descriptions
has come to light. The ncurses developers invented WACS-prefixed names for them.
PORTABILITY
Applications employing ncurses extensions should condition their use on the visibility of the
NCURSES_VERSION preprocessor macro.
These functions are described in X/Open Curses Issue 4. It specifies no error conditions for them.
The defaults specified for forms-drawing characters apply in the POSIX locale. X/Open Curses makes it
clear that the WACS_ symbols should be defined as a pointer to cchar_t data, e.g., in the discussion of
border_set. A few implementations are problematic:
• NetBSD curses defines the symbols as a wchar_t within a cchar_t.
• HP-UX curses equates some of the ACS_ symbols to the analogous WACS_ symbols as if the ACS_ symbols
were wide characters. The misdefined symbols are the arrows and other symbols which are not used for
line-drawing.
X/Open Curses does not specify symbols for thick- or double-lines. SVr4 curses implementations defined
their line-drawing symbols in terms of intermediate symbols. ncurses extends those symbols, providing
new definitions not found in SVr4 implementations.
Not all Unicode-capable terminals provide support for VT100-style alternate character sets (i.e., the
acsc_chars (acsc) capability), with their corresponding line-drawing characters. X/Open Curses did not
address the aspect of integrating Unicode with line-drawing characters. Existing implementations of
System V curses (AIX, HP-UX, Solaris) use only the acsc_chars (acsc) character-mapping to provide this
feature. As a result, those implementations can use only single-byte line-drawing characters. ncurses
5.3 (2002) provided a table of Unicode values to solve these problems. NetBSD curses incorporated that
table in 2010.
ncurses uses the Unicode values instead of the terminal type description's acsc_chars (acsc) mapping as
discussed in ncurses(3NCURSES) for the environment variable NCURSES_NO_UTF8_ACS. In contrast, for the
same cases, the line-drawing characters described in addch(3NCURSES) will use only the ASCII default
values.
Having Unicode available does not solve all of the problems with line-drawing for curses:
• The closest Unicode equivalents to the VT100 graphics S1, S3, S7, and S9 frequently are not displayed
at the regular intervals which the terminal used.
• The lantern is a special case. It originated with the AT&T 4410 terminal in the early 1980s. There
is no accessible documentation depicting the lantern symbol on the AT&T terminal.
Lacking documentation, most readers assume that a storm lantern was intended. But there are several
possibilities, all with problems.
Unicode 6.0 (2010) does provide two lantern symbols: U+1F383 and U+1F3EE. Those were not available
in 2002, and are irrelevant since they lie outside the Basic Multilingual Plane and as a result are
unavailable on many terminals. They are not storm lanterns, in any case.
Most storm lanterns have a tapering glass chimney (to guard against tipping); some have a wire grid
protecting the chimney.
For the tapering appearance, ☃ U+2603 was adequate. In use on a terminal, no one can tell what the
image represents. Unicode calls it a snowman.
Others have suggested these alternatives: § U+00A7 (section mark), Θ U+0398 (theta), Φ U+03A6 (phi),
δ U+03B4 (delta), ⌧ U+2327 (x in a rectangle), ╬ U+256C (forms double vertical and horizontal), and ☒
U+2612 (ballot box with x).
Complex Characters
The complex character type cchar_t can store more than one wide character (wchar_t). X/Open Curses does
not mention this possibility, specifying behavior only where wch is a single character, either spacing or
non-spacing.
ncurses assumes that wch is constructed using setcchar(3NCURSES), and in turn that the result
• contains at most one spacing character at the beginning of its list of wide characters, and zero or
more non-spacing characters, or
• holds one non-spacing character.
In the latter case, ncurses adds the non-spacing character to the active complex character.
HISTORY
X/Open Curses Issue 4 (1995) initially specified these functions. The System V Interface Definition
(SVID) Version 4 of the same year specified functions named waddwch (and the usual variants), echowchar,
and wechowchar. These were later additions to SVr4.x, not appearing in the first SVr4 (1989). They
differed from X/Open's later wadd_wch and wecho_wchar in that they each took an argument of type wchar_t
instead of cchar_t. SVID defined no WACS_ symbols.
X/Open Curses Issue 4 also defined many of the WACS_ constants, excepting WACS_GEQUAL, WACS_LEQUAL,
WACS_NEQUAL, WACS_PI, WACS_S3, WACS_S7, and WACS_STERLING; and those for drawing thick and double lines.
ncurses 5.3 (2002) furnished the remaining WACS_ constants.
SEE ALSO
addch(3NCURSES) describes comparable functions of the ncurses library in its non-wide-character configuration. ncurses(3NCURSES), addwstr(3NCURSES), add_wchstr(3NCURSES), attr(3NCURSES), bkgrnd(3NCURSES), clear(3NCURSES), getcchar(3NCURSES), outopts(3NCURSES), refresh(3NCURSES), curses_variables(3NCURSES), putwc(3)