Provided by: ovn-common_24.09.0-1_amd64 
NAME
ovn-nb - OVN_Northbound database schema
This database is the interface between OVN and the cloud management system (CMS), such as
OpenStack, running above it. The CMS produces almost all of the contents of the database.
The ovn-northd program monitors the database contents, transforms it, and stores it into
the OVN_Southbound database.
We generally speak of ``the’’ CMS, but one can imagine scenarios in which multiple CMSes
manage different parts of an OVN deployment.
External IDs
Each of the tables in this database contains a special column, named external_ids. This
column has the same form and purpose each place it appears.
external_ids: map of string-string pairs
Key-value pairs for use by the CMS. The CMS might use certain pairs, for
example, to identify entities in its own configuration that correspond to
those in this database.
TABLE SUMMARY
The following list summarizes the purpose of each of the tables in the OVN_Northbound
database. Each table is described in more detail on a later page.
Table Purpose
NB_Global Northbound configuration
Sample_Collector
Sample_Collector
Sample Sample
Copp Control plane protection
Logical_Switch
L2 logical switch
Logical_Switch_Port
L2 logical switch port
Forwarding_Group
forwarding group
Address_Set
Address Sets
Port_Group
Port Groups
Load_Balancer
load balancer
Load_Balancer_Group
load balancer group
Load_Balancer_Health_Check
load balancer
ACL Access Control List (ACL) rule
Logical_Router
L3 logical router
QoS QoS rule
Mirror Mirror Entry
Meter Meter entry
Meter_Band
Band for meter entries
Logical_Router_Port
L3 logical router port
Logical_Router_Static_Route
Logical router static routes
Logical_Router_Policy
Logical router policies
NAT NAT rules
DHCP_Options
DHCP options
DHCP_Relay
DHCP Relay
Connection
OVSDB client connections.
DNS Native DNS resolution
SSL SSL configuration.
Gateway_Chassis
Gateway_Chassis configuration.
HA_Chassis_Group
HA_Chassis_Group configuration.
HA_Chassis
HA_Chassis configuration.
BFD BFD configuration.
Static_MAC_Binding
Static_MAC_Binding configuration.
Chassis_Template_Var
Chassis_Template_Var configuration.
Sampling_App
Sampling_App configuration.
NB_Global TABLE
Northbound configuration for an OVN system. This table must have exactly one row.
Summary:
Identity:
name string
Status:
nb_cfg integer
nb_cfg_timestamp integer
sb_cfg integer
sb_cfg_timestamp integer
hv_cfg integer
hv_cfg_timestamp integer
Common Columns:
external_ids map of string-string pairs
Common options:
options map of string-string pairs
Options for configuring OVS BFD:
options : bfd-min-rx optional string
options : bfd-decay-min-rx
optional string
options : bfd-min-tx optional string
options : bfd-mult optional string
options : ignore_chassis_features
optional string
options : mac_prefix optional string
options : mac_binding_removal_limit
optional string, containing an integer, in range 0 to
4,294,967,295
options : fdb_removal_limit
optional string, containing an integer, in range 0 to
4,294,967,295
options : controller_event optional string, either true or false
options : northd_probe_interval
optional string
options : ic_probe_interval
optional string
options : nbctl_probe_interval
optional string
options : northd_trim_timeout
optional string
options : use_logical_dp_groups
optional string
options : use_parallel_build
optional string
options : ignore_lsp_down optional string
options : use_ct_inv_match optional string
options : default_acl_drop optional string
options : debug_drop_domain_id
optional string
options : debug_drop_collector_set
optional string
options : use_common_zone optional string, either true or false
options : northd-backoff-interval-ms
optional string
options : vxlan_mode optional string
options : always_tunnel optional string, either true or false
Options for configuring interconnection route advertisement:
options : ic-route-adv optional string
options : ic-route-learn optional string
options : ic-route-adv-default
optional string
options : ic-route-learn-default
optional string
options : ic-route-denylist
optional string
Connection Options:
connections set of Connections
ssl optional SSL
Security Configurations:
ipsec boolean
Read-only Options:
options : max_tunid optional string
Details:
Identity:
name: string
The name of the OVN cluster, which uniquely identifies the OVN cluster throughout
all OVN clusters supposed to interconnect with each other.
Status:
These columns allow a client to track the overall configuration state of the system.
nb_cfg: integer
Sequence number for client to increment. When a client modifies any part of the
northbound database configuration and wishes to wait for ovn-northd and possibly
all of the hypervisors to finish applying the changes, it may increment this
sequence number.
nb_cfg_timestamp: integer
The timestamp, in milliseconds since the epoch, when ovn-northd sees the latest
nb_cfg and starts processing.
To print the timestamp as a human-readable date:
date -d "@$(ovn-nbctl get NB_Global . nb_cfg_timestamp | sed ’s/...$//’)"
sb_cfg: integer
Sequence number that ovn-northd sets to the value of nb_cfg after it finishes
applying the corresponding configuration changes to the OVN_Southbound database.
sb_cfg_timestamp: integer
The timestamp, in milliseconds since the epoch, when ovn-northd finishes applying
the corresponding configuration changes to the OVN_Southbound database
successfully.
hv_cfg: integer
Sequence number that ovn-northd sets to the smallest sequence number of all the
chassis in the system, as reported in the Chassis_Private table in the southbound
database. Thus, hv_cfg equals nb_cfg if all chassis are caught up with the
northbound configuration (which may never happen, if any chassis is down). This
value can regress, if a chassis was removed from the system and rejoins before
catching up.
If there are no chassis, then ovn-northd copies nb_cfg to hv_cfg. Thus, in this
case, the (nonexistent) hypervisors are always considered to be caught up. This
means that hypervisors can be "caught up" even in cases where sb_cfg would show
that the southbound database is not. To detect when both the hypervisors and the
southbound database are caught up, a client should take the smaller of sb_cfg and
hv_cfg.
hv_cfg_timestamp: integer
The largest timestamp, in milliseconds since the epoch, of the smallest sequence
number of all the chassis in the system, as reported in the Chassis_Private table
in the southbound database. In other words, this timestamp reflects the time when
the slowest chassis catches up with the northbound configuration, which is useful
for end-to-end control plane latency measurement.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Common options:
options: map of string-string pairs
This column provides general key/value settings. The supported options are
described individually below.
Options for configuring OVS BFD:
These options apply when ovn-controller configures OVS BFD on tunnels interfaces. Please
note these parameters refer to legacy OVS BFD implementation and not to OVN BFD one.
options : bfd-min-rx: optional string
BFD option min-rx value to use when configuring BFD on tunnel interfaces.
options : bfd-decay-min-rx: optional string
BFD option decay-min-rx value to use when configuring BFD on tunnel interfaces.
options : bfd-min-tx: optional string
BFD option min-tx value to use when configuring BFD on tunnel interfaces.
options : bfd-mult: optional string
BFD option mult value to use when configuring BFD on tunnel interfaces.
options : ignore_chassis_features: optional string
When set to false, the ovn-northd will evaluate the features supported by each
chassis and will only activate features that are universally supported by all
chassis. This approach is crucial for maintaining backward compatibility during an
upgrade when the ovn-northd is updated prior to the ovn-controller. However, if any
chassis is poorly managed and the upgrade is unsuccessful, it will restrict
ovn-northd from activating the new features.
Alternatively, setting this option to true instructs ovn-northd to bypass the
support status of features on each chassis and to directly implement the latest
features. This approach safeguards the operation of ovn-northd from being adversely
affected by a mismatched configuration of a chassis.
The default setting for this option is false.
options : mac_prefix: optional string
Configure a given OUI to be used as prefix when L2 address is dynamically assigned,
e.g. 00:11:22
options : mac_binding_removal_limit: optional string, containing an integer, in range 0 to
4,294,967,295
MAC binding aging bulk removal limit. This limits how many rows can expire in a
single transaction. Default value is 0 which is unlimited. When we hit the limit
next batch removal is delayed by 5 s.
options : fdb_removal_limit: optional string, containing an integer, in range 0 to
4,294,967,295
FDB aging bulk removal limit. This limits how many rows can expire in a single
transaction. Default value is 0 which is unlimited. When we hit the limit next
batch removal is delayed by 5 s.
options : controller_event: optional string, either true or false
Value set by the CMS to enable/disable ovn-controller event reporting. Traffic into
OVS can raise a ’controller’ event that results in a Controller_Event being written
to the Controller_Event table in SBDB. When the CMS has seen the event and taken
appropriate action, it can remove the corresponding row in Controller_Event table.
The intention is for a CMS to see the events and take some sort of action. Please
see the Controller_Event table in SBDB. It is possible to associate a meter to each
controller event type in order to not overload the pinctrl thread under heavy load.
Each event type relies on a meter with a defined name:
• empty_lb_backends: event-elb
options : northd_probe_interval: optional string
The inactivity probe interval of the connection to the OVN Northbound and
Southbound databases from ovn-northd, in milliseconds. If the value is zero, it
disables the connection keepalive feature.
If the value is nonzero, then it will be forced to a value of at least 1000 ms.
options : ic_probe_interval: optional string
The inactivity probe interval of the connection to the OVN Northbound and
Southbound databases from ovn-ic, in milliseconds. If the value is zero, it
disables the connection keepalive feature.
If the value is nonzero, then it will be forced to a value of at least 1000 ms.
options : nbctl_probe_interval: optional string
The inactivity probe interval of the connection to the OVN Northbound database from
ovn-nbctl utility, in milliseconds. If the value is zero, it disables the
connection keepalive feature.
If the value is nonzero, then it will be forced to a value of at least 1000 ms.
If the value is less than zero, then the default inactivity probe interval for
ovn-nbctl would be left intact (120000 ms).
options : northd_trim_timeout: optional string
When used, this configuration value specifies the time, in milliseconds, since the
last ovn-northd active operation after which memory trimming is performed. By
default this is set to 30000 (30 seconds).
options : use_logical_dp_groups: optional string
Note: This option is deprecated, the only behavior is to always combine logical
flows by datapath groups. Changing the value or removing this option all toghether
will have no effect.
ovn-northd combines logical flows that differs only by logical datapath into a
single logical flow with logical datapath group attached.
options : use_parallel_build: optional string
If set to true, ovn-northd will attempt to compute logical flows in parallel.
Parallel computation is enabled only if the system has 4 or more cores/threads
available to be used by ovn-northd.
The default value is false.
options : ignore_lsp_down: optional string
If set to false, ARP/ND reply flows for logical switch ports will be installed only
if the port is up, i.e. claimed by a Chassis. If set to true, these flows are
installed regardless of the status of the port, which can result in a situation
that ARP request to an IP is resolved even before the relevant VM/container is
running. For environments where this is not an issue, setting it to true can reduce
the load and latency of the control plane. The default value is true.
options : use_ct_inv_match: optional string
If set to false, ovn-northd will not use the ct.inv field in any of the logical
flow matches. The default value is true. If the NIC supports offloading OVS
datapath flows but doesn’t support offloading ct_state inv flag, then the datapath
flows matching on this flag (either +inv or -inv) will not be offloaded. CMS should
consider setting use_ct_inv_match to false in such cases. This results in a side
effect of the invalid packets getting delivered to the destination VIF, which
otherwise would have been dropped by OVN.
options : default_acl_drop: optional string
If set to true., ovn-northd will generate a logical flow to drop all traffic in the
ACL stages. By default this option is set to false.
options : debug_drop_domain_id: optional string
If set to a 8-bit number and if debug_drop_collector_set is also configured,
ovn-northd will add a sample action to every logical flow that contains a ’drop’
action. The 8 most significant bits of the observation_domain_id field will be
those specified in the debug_drop_domain_id. The 24 least significant bits of the
observation_domain_id field will be the datapath’s key.
The observation_point_id will be set to the first 32 bits of the logical flow’s
UUID.
Note: This key is deprecated in favor of the value configured in the Sampling_App
table for the drop application.
options : debug_drop_collector_set: optional string
If set to a 32-bit number ovn-northd will add a sample action to every logical flow
that contains a ’drop’ action. The sample action will have the specified
collector_set_id. The value must match that of the local OVS configuration as
described in ovs-actions(7).
options : use_common_zone: optional string, either true or false
Default value is false. If set to true the SNAT and DNAT happens in common zone,
instead of happening in separate zones, depending on the configuration. However,
this option breaks traffic when there is configuration of DGP + LB + SNAT on this
LR. The value true should be used only in case of HWOL compatibility with GDP.
options : northd-backoff-interval-ms: optional string
Maximum interval that the northd incremental engine is delayed by in milliseconds.
Setting the value to nonzero delays the next northd engine run by the previous run
time, capped by the specified value. If the value is zero the engine won’t be
delayed at all. The recommended period is smaller than 500 ms, beyond that the
latency of SB changes would be very noticeable.
options : vxlan_mode: optional string
By default if at least one chassis in OVN cluster has VXLAN encap, northd will run
in a VXLAN mode. See man ovn-architecture(7) Tunnel Encapsulations paragraph for
more details. In case VXLAN encaps are needed on chassis only to support HW VTEP
functionality and main encap type is GENEVE or STT, set this option to false to use
default non-VXLAN mode tunnel IDs allocation logic.
options : always_tunnel: optional string, either true or false
If set to true, then the traffic destined to a VIF of a provider logical switch
(having a localnet port) will be tunnelled instead of sending it via the localnet
port. This option will be useful if CMS wants to connect overlay logical switches
(without localnet port) and provider logical switches to a router. Without this
option set, the traffic path will be a mix of tunnelling and localnet ports (since
routing is distributed) resulting in the leakage of the router port mac address to
the upstream switches and undefined behavior if NATting is involed. This option is
disabled by default.
Options for configuring interconnection route advertisement:
These options control how routes are advertised between OVN deployments for
interconnection. If enabled, ovn-ic from different OVN deployments exchanges routes
between each other through the global OVN_IC_Southbound database. Only routers with ports
connected to interconnection transit switches participate in route advertisement. For each
of these routers, there are two types of routes to be advertised:
Firstly, the static routes configured in the router are advertised.
Secondly, the networks configured in the logical router ports that are not on the transit
switches are advertised. These are considered as directly connected subnets on the router.
Link local prefixes (IPv4 169.254.0.0/16 and IPv6 FE80::/10) are never advertised.
The learned routes are added to the static_routes column of the Logical_Router table, with
external_ids:ic-learned-route set to the uuid of the row in Route table of the
OVN_IC_Southbound database.
options : ic-route-adv: optional string
A boolean value that enables route advertisement to the global OVN_IC_Southbound
database. Default is false.
options : ic-route-learn: optional string
A boolean value that enables route learning from the global OVN_IC_Southbound
database. Default is false.
options : ic-route-adv-default: optional string
A boolean value that enables advertising default route to the global
OVN_IC_Southbound database. Default is false. This option takes effect only when
option ic-route-adv is true.
options : ic-route-learn-default: optional string
A boolean value that enables learning default route from the global
OVN_IC_Southbound database. Default is false. This option takes effect only when
option ic-route-learn is true.
options : ic-route-denylist: optional string
A string value contains a list of CIDRs delimited by ",". A route will not be
advertised or learned if the route’s prefix belongs to any of the CIDRs listed.
Connection Options:
connections: set of Connections
Database clients to which the Open vSwitch database server should connect or on
which it should listen, along with options for how these connections should be
configured. See the Connection table for more information.
ssl: optional SSL
Global SSL configuration.
Security Configurations:
ipsec: boolean
Tunnel encryption configuration. If this column is set to be true, all OVN tunnels
will be encrypted with IPsec.
Read-only Options:
options : max_tunid: optional string
The maximum supported tunnel ID. Depends on types of encapsulation enabled in the
cluster.
Sample_Collector TABLE
Summary:
id integer, in range 1 to 255 (must be unique within table)
name string
probability integer, in range 0 to 65,535
set_id integer, in range 1 to 4,294,967,295
external_ids map of string-string pairs
Details:
id: integer, in range 1 to 255 (must be unique within table)
Sample collector unique id used for differentiating collectors that use the same
set_id with different probability values. The supported value range for IDs is
1-255.
name: string
Name of the sample collector.
probability: integer, in range 0 to 65,535
Sampling probability for this collector. It must be an integer number between 0 and
65535. A value of 0 corresponds to no packets being sampled while a value of 65535
corresponds to all packets being sampled.
set_id: integer, in range 1 to 4,294,967,295
The 8-bit integer identifier of the set of of collectors to send packets to. See
Flow_Sample_Collector_Set Table in ovs-vswitchd’s database schema.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Sample TABLE
This table describes a Sampling configuration. Entries in other tables might be associated
with Sample entries to indicate how the sample should be generated. For an example, see
ACL.
Summary:
collectors set of Sample_Collectors
metadata integer, in range 1 to 4,294,967,295 (must be unique within
table)
Details:
collectors: set of Sample_Collectors
A list of references to Sample_Collector records to be used when generating samples
(e.g., IPFIX). A sample can be sent to multiple collectors simultaneously.
metadata: integer, in range 1 to 4,294,967,295 (must be unique within table)
Will be used as Observation Point ID in every sample. The Observation Domain ID
will be generated by ovn-northd and includes the logical datapath key as the least
significant 24 bits and the sampling application type (e.g., drop debugging) as the
8 most significant bits.
Copp TABLE
This table is used to define control plane protection policies, i.e., associate entries
from table Meter to control protocol names.
Summary:
name string (must be unique within table)
meters : arp optional string
meters : arp-resolve optional string
meters : dhcpv4-opts optional string
meters : dhcpv6-opts optional string
meters : dns optional string
meters : event-elb optional string
meters : icmp4-error optional string
meters : icmp6-error optional string
meters : igmp optional string
meters : nd-na optional string
meters : nd-ns optional string
meters : nd-ns-resolve optional string
meters : nd-ra-opts optional string
meters : tcp-reset optional string
meters : bfd optional string
meters : reject optional string
meters : svc-monitor optional string
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
CoPP name.
meters : arp: optional string
Rate limiting meter for ARP packets (request/reply) used for learning neighbors.
meters : arp-resolve: optional string
Rate limiting meter for packets that require resolving the next-hop (through ARP).
meters : dhcpv4-opts: optional string
Rate limiting meter for packets that require adding DHCPv4 options.
meters : dhcpv6-opts: optional string
Rate limiting meter for packets that require adding DHCPv6 options.
meters : dns: optional string
Rate limiting meter for DNS query packets that need to be replied to.
meters : event-elb: optional string
Rate limiting meter for empty load balancer events.
meters : icmp4-error: optional string
Rate limiting meter for packets that require replying with an ICMP error.
meters : icmp6-error: optional string
Rate limiting meter for packets that require replying with an ICMPv6 error.
meters : igmp: optional string
Rate limiting meter for IGMP packets.
meters : nd-na: optional string
Rate limiting meter for ND neighbor advertisement packets used for learning
neighbors.
meters : nd-ns: optional string
Rate limiting meter for ND neighbor solicitation packets used for learning
neighbors.
meters : nd-ns-resolve: optional string
Rate limiting meter for packets that require resolving the next-hop (through ND).
meters : nd-ra-opts: optional string
Rate limiting meter for packets that require adding ND router advertisement
options.
meters : tcp-reset: optional string
Rate limiting meter for packets that require replying with TCP RST packet.
meters : bfd: optional string
Rate limiting meter for BFD packets.
meters : reject: optional string
Rate limiting meter for packets that trigger a reject action
meters : svc-monitor: optional string
Rate limiting meter for packets that are arriving to service monitor MAC address.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Logical_Switch TABLE
Each row represents one L2 logical switch.
There are two kinds of logical switches, that is, ones that fully virtualize the network
(overlay logical switches) and ones that provide simple connectivity to physical networks
(bridged logical switches). They work in the same way when providing connectivity between
logical ports on same chassis, but differently when connecting remote logical ports.
Overlay logical switches connect remote logical ports by tunnels, while bridged logical
switches provide connectivity to remote ports by bridging the packets to directly
connected physical L2 segments with the help of localnet ports. Each bridged logical
switch has one or more localnet ports, which have only one special address unknown.
Summary:
ports set of Logical_Switch_Ports
load_balancer set of weak reference to Load_Balancers
load_balancer_group set of Load_Balancer_Groups
acls set of ACLs
qos_rules set of QoSes
dns_records set of weak reference to DNSes
forwarding_groups set of Forwarding_Groups
Naming:
name string
external_ids : neutron:network_name
optional string
IP Address Assignment:
other_config : subnet optional string
other_config : exclude_ips optional string
other_config : ipv6_prefix optional string
other_config : dhcp_relay_port
optional string
other_config : mac_only optional string, either true or false
other_config : fdb_age_threshold
optional string, containing an integer, in range 0 to
4,294,967,295
other_config : ct-zone-limit
optional string, containing an integer, in range 0 to
4,294,967,295
IP Multicast Snooping Options:
other_config : mcast_snoop optional string, either true or false
other_config : mcast_querier
optional string, either true or false
other_config : mcast_flood_unregistered
optional string, either true or false
other_config : mcast_table_size
optional string, containing an integer, in range 1 to 32,766
other_config : mcast_idle_timeout
optional string, containing an integer, in range 15 to 3,600
other_config : mcast_query_interval
optional string, containing an integer, in range 1 to 3,600
other_config : mcast_query_max_response
optional string, containing an integer, in range 1 to 10
other_config : mcast_eth_src
optional string
other_config : mcast_ip4_src
optional string
other_config : mcast_ip6_src
optional string
Interconnection:
other_config : interconn-ts
optional string
Tunnel Key:
other_config : requested-tnl-key
optional string, containing an integer, in range 1 to
16,777,215
copp optional weak reference to Copp
Other options:
other_config : vlan-passthru
optional string, either true or false
other_config : broadcast-arps-to-all-routers
optional string, either true or false
Common Columns:
external_ids map of string-string pairs
Details:
ports: set of Logical_Switch_Ports
The logical ports connected to the logical switch.
It is an error for multiple logical switches to include the same logical port.
load_balancer: set of weak reference to Load_Balancers
Set of load balancers associated to this logical switch.
load_balancer_group: set of Load_Balancer_Groups
Set of load balancers groups associated to this logical switch.
acls: set of ACLs
Access control rules that apply to packets within the logical switch.
qos_rules: set of QoSes
QoS marking and metering rules that apply to packets within the logical switch.
dns_records: set of weak reference to DNSes
This column defines the DNS records to be used for resolving internal DNS queries
within the logical switch by the native DNS resolver. Please see the DNS table.
forwarding_groups: set of Forwarding_Groups
Groups a set of logical port endpoints for traffic going out of the logical switch.
Naming:
These columns provide names for the logical switch. From OVN’s perspective, these names
have no special meaning or purpose other than to provide convenience for human interaction
with the database. There is no requirement for the name to be unique. (For a unique
identifier for a logical switch, use its row UUID.)
(Originally, name was intended to serve the purpose of a human-friendly name, but the
Neutron integration used it to uniquely identify its own switch object, in the format
neutron-uuid. Later on, Neutron started propagating the friendly name of a switch as
external_ids:neutron:network_name. Perhaps this can be cleaned up someday.)
name: string
A name for the logical switch.
external_ids : neutron:network_name: optional string
Another name for the logical switch.
IP Address Assignment:
These options control automatic IP address management (IPAM) for ports attached to the
logical switch. To enable IPAM for IPv4, set other_config:subnet and optionally
other_config:exclude_ips. To enable IPAM for IPv6, set other_config:ipv6_prefix. IPv4 and
IPv6 may be enabled together or separately.
To request dynamic address assignment for a particular port, use the dynamic keyword in
the addresses column of the port’s Logical_Switch_Port row. This requests both an IPv4 and
an IPv6 address, if IPAM for IPv4 and IPv6 are both enabled.
other_config : subnet: optional string
Set this to an IPv4 subnet, e.g. 192.168.0.0/24, to enable ovn-northd to
automatically assign IP addresses within that subnet.
other_config : exclude_ips: optional string
To exclude some addresses from automatic IP address management, set this to a list
of the IPv4 addresses or ..-delimited ranges to exclude. The addresses or ranges
should be a subset of those in other_config:subnet.
Whether listed or not, ovn-northd will never allocate the first or last address in
a subnet, such as 192.168.0.0 or 192.168.0.255 in 192.168.0.0/24.
Examples:
• 192.168.0.2 192.168.0.10
• 192.168.0.4 192.168.0.30..192.168.0.60 192.168.0.110..192.168.0.120
• 192.168.0.110..192.168.0.120 192.168.0.25..192.168.0.30 192.168.0.144
other_config : ipv6_prefix: optional string
Set this to an IPv6 prefix to enable ovn-northd to automatically assign IPv6
addresses using this prefix. The assigned IPv6 address will be generated using the
IPv6 prefix and the MAC address (converted to an IEEE EUI64 identifier) of the
port. The IPv6 prefix defined here should be a valid IPv6 address ending with ::.
Examples:
• aef0::
• bef0:1234:a890:5678::
• 8230:5678::
other_config : dhcp_relay_port: optional string
If set to the name of logical switch port of type router then, DHCP Relay is
enabled for this logical switch provided the corresponding Logical_Router_Port has
DHCP Relay configured.
other_config : mac_only: optional string, either true or false
Value used to request to assign L2 address only if neither subnet nor ipv6_prefix
are specified
other_config : fdb_age_threshold: optional string, containing an integer, in range 0 to
4,294,967,295
FDB aging threshold value in seconds. FDB exceeding this timeout will be
automatically removed. The value defaults to 0, which means disabled.
other_config : ct-zone-limit: optional string, containing an integer, in range 0 to
4,294,967,295
CT zone limit value for given Logical_Switch. This value will be propagated to all
Logical_Switch_Port when configured, but can be overwritten individually per
Logical_Switch_Port. The value 0 means unlimited. When the option is not present
the limit is not set and the zone limit is derived from OvS default datapath limit.
IP Multicast Snooping Options:
These options control IP Multicast Snooping configuration of the logical switch. To enable
IP Multicast Snooping set other_config:mcast_snoop to true. To enable IP Multicast Querier
set other_config:mcast_querier to true. If IP Multicast Querier is enabled
other_config:mcast_eth_src and other_config:mcast_ip4_src must be set.
other_config : mcast_snoop: optional string, either true or false
Enables/disables IP Multicast Snooping on the logical switch. Default: false.
other_config : mcast_querier: optional string, either true or false
Enables/disables IP Multicast Querier on the logical switch. Only applicable if
other_config:mcast_snoop is enabled. Default: true.
other_config : mcast_flood_unregistered: optional string, either true or false
Determines whether unregistered multicast traffic should be flooded or not. Only
applicable if other_config:mcast_snoop is enabled. Default: false.
other_config : mcast_table_size: optional string, containing an integer, in range 1 to
32,766
Number of multicast groups to be stored. Default: 2048.
other_config : mcast_idle_timeout: optional string, containing an integer, in range 15 to
3,600
Configures the IP Multicast Snooping group idle timeout (in seconds). Default: 300
seconds.
other_config : mcast_query_interval: optional string, containing an integer, in range 1 to
3,600
Configures the IP Multicast Querier interval between queries (in seconds). Default:
other_config:mcast_idle_timeout / 2.
other_config : mcast_query_max_response: optional string, containing an integer, in range
1 to 10
Configures the value of the "max-response" field in the multicast queries
originated by the logical switch. Default: 1 second.
other_config : mcast_eth_src: optional string
Configures the source Ethernet address for queries originated by the logical
switch.
other_config : mcast_ip4_src: optional string
Configures the source IPv4 address for queries originated by the logical switch.
other_config : mcast_ip6_src: optional string
Configures the source IPv6 address for queries originated by the logical switch.
Interconnection:
other_config : interconn-ts: optional string
The name of corresponding transit switch in OVN_IC_Northbound database. This kind
of logical switch is created and controlled by ovn-ic.
Tunnel Key:
other_config : requested-tnl-key: optional string, containing an integer, in range 1 to
16,777,215
Configures the datapath tunnel key for the logical switch. Usually this is not
needed because ovn-northd will assign an unique key for each datapath by itself.
However, if it is configured, ovn-northd honors the configured value. The typical
use case is for interconnection: the tunnel keys for transit switches need to be
unique globally, so they are maintained in the global OVN_IC_Southbound database,
and ovn-ic simply syncs the value from OVN_IC_Southbound through this config.
copp: optional weak reference to Copp
The control plane protection policy from table Copp used for metering packets sent
to ovn-controller from ports of this logical switch.
Other options:
other_config : vlan-passthru: optional string, either true or false
Determines whether VLAN tagged incoming traffic should be allowed. Note that this
may have security implications when enabled for a logical switch with a tag=0
localnet port. If not properly isolated from other localnet ports, fabric traffic
that belongs to other tagged networks may be passed through such a port.
other_config : broadcast-arps-to-all-routers: optional string, either true or false
Determines whether arp requests and ipv6 neighbor solicitations should be sent to
all routers and other switchports (default) or if it should only be sent to
switchports where the ip/mac address is unknown. Setting this to false can
significantly reduce the load if the logical switch can receive arp requests for
ips it does not know about. However setting this to false also means that garps are
no longer forwarded to all routers and therefor the mac bindings of the routers are
no longer updated.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Logical_Switch_Port TABLE
A port within an L2 logical switch.
Summary:
Core Features:
name string (must be unique within table)
type string
Options:
options map of string-string pairs
Options for router ports:
options : router-port optional string
options : nat-addresses optional string
options : exclude-lb-vips-from-garp
optional string
options : arp_proxy optional string
options : enable_router_port_acl
optional string, either true or false
options : ct-zone-limit optional string, containing an integer, in range 0 to
4,294,967,295
Options for localnet ports:
options : network_name optional string
options : ethtype optional string
options : localnet_learn_fdb
optional string, either true or false
Options for l2gateway ports:
options : network_name optional string
options : l2gateway-chassis
optional string
Options for vtep ports:
options : vtep-physical-switch
optional string
options : vtep-logical-switch
optional string
VMI (or VIF) Options:
options : requested-chassis
optional string
options : activation-strategy
optional string
options : iface-id-ver optional string
options : qos_min_rate optional string
options : qos_max_rate optional string
options : qos_burst optional string
options : hostname optional string
options : force_fdb_lookup
optional string, either true or false
options : disable_garp_rarp
optional string, either true or false
options : pkt_clone_type optional string, must be mc_unknown
options : disable_arp_nd_rsp
optional string, either true or false
VIF Plugging Options:
options : vif-plug-type
optional string
options : vif-plug-mtu-request
optional string
Virtual port Options:
options : virtual-ip optional string
options : virtual-parents
optional string
IP Multicast Snooping Options:
options : mcast_flood optional string, either true or false
options : mcast_flood_reports
optional string, either true or false
Containers:
parent_name optional string
tag_request optional integer, in range 0 to 4,095
tag optional integer, in range 1 to 4,095
Port State:
up optional boolean
enabled optional boolean
Addressing:
addresses set of strings
dynamic_addresses optional string
port_security set of strings
DHCP:
dhcpv4_options optional weak reference to DHCP_Options
dhcpv6_options optional weak reference to DHCP_Options
mirror_rules set of weak reference to Mirrors
ha_chassis_group optional HA_Chassis_Group
Naming:
external_ids : neutron:port_name
optional string
Tunnel Key:
options : requested-tnl-key
optional string, containing an integer, in range 1 to 32,767
Common Columns:
external_ids map of string-string pairs
Details:
Core Features:
name: string (must be unique within table)
The logical port name.
For entities (VMs or containers) that are spawned in the hypervisor, the name used
here must match those used in the external_ids:iface-id in the Open_vSwitch
database’s Interface table, because hypervisors use external_ids:iface-id as a
lookup key to identify the network interface of that entity.
For containers that share a VIF within a VM, the name can be any unique identifier.
See Containers, below, for more information.
A logical switch port may not have the same name as a logical router port, but the
database schema cannot enforce this.
type: string
Specify a type for this logical port. Logical ports can be used to model other
types of connectivity into an OVN logical switch. The following types are defined:
(empty string)
A VM (or VIF) interface.
router A connection to a logical router. The value of options:router-port specifies
the name of the Logical_Router_Port to which this logical switch port is
connected.
localnet
A connection to a locally accessible network from ovn-controller instances
that have a corresponding bridge mapping. A logical switch can have multiple
localnet ports attached. This type is used to model direct connectivity to
existing networks. In this case, each chassis should have a mapping for one
of the physical networks only. Note: nothing said above implies that a
chassis cannot be plugged to multiple physical networks as long as they
belong to different switches.
localport
A connection to a local VIF. Traffic that arrives on a localport is never
forwarded over a tunnel to another chassis. These ports are present on every
chassis and have the same address in all of them. This is used to model
connectivity to local services that run on every hypervisor.
l2gateway
A connection to a physical network.
vtep A port to a logical switch on a VTEP gateway.
external
Represents a logical port which is external and not having an OVS port in
the integration bridge. OVN will never receive any traffic from this port or
send any traffic to this port. OVN can support native services like
DHCPv4/DHCPv6/DNS for this port. If ha_chassis_group is defined,
ovn-controller running in the active chassis of the HA chassis group will
bind this port to provide these native services. It is expected that this
port belong to a bridged logical switch (with a localnet port).
It is recommended to use the same HA chassis group for all the external
ports of a logical switch. Otherwise, the physical switch might see MAC flap
issue when different chassis provide the native services. For example when
supporting native DHCPv4 service, DHCPv4 server mac (configured in
options:server_mac column in table DHCP_Options) originating from different
ports can cause MAC flap issue. The MAC of the logical router IP(s) can also
flap if the same HA chassis group is not set for all the external ports of a
logical switch.
Below are some of the use cases where external ports can be used.
• VMs connected to SR-IOV nics - Traffic from these VMs by passes the
kernel stack and local ovn-controller do not bind these ports and
cannot serve the native services.
• When CMS supports provisioning baremetal servers.
virtual
Represents a logical port which does not have an OVS port in the integration
bridge and has a virtual ip configured in the options:virtual-ip column.
This virtual ip can move around between the logical ports configured in the
options:virtual-parents column.
One of the use case where virtual ports can be used is.
• The virtual ip represents a load balancer vip and the virtual parents
provide load balancer service in an active-standby setup with the
active virtual parent owning the virtual ip.
remote A remote port is to model a port that resides remotely on another OVN, which
is on the other side of a transit logical switch for OVN interconnection.
This type of ports are created by ovn-ic instead of by CMS. Any change to
the port will be automatically overwritten by ovn-ic.
Options:
options: map of string-string pairs
This column provides key/value settings specific to the logical port type. The
type-specific options are described individually below.
Options for router ports:
These options apply when type is router.
options : router-port: optional string
Required. The name of the Logical_Router_Port to which this logical switch port is
connected.
options : nat-addresses: optional string
This is used to send gratuitous ARPs for SNAT and DNAT IP addresses via the
localnet port that is attached to the same logical switch as this type router port.
This option is specified on a logical switch port that is connected to a gateway
router, or a logical switch port that is connected to a distributed gateway port on
a logical router.
This must take one of the following forms:
router Gratuitous ARPs will be sent for all SNAT and DNAT external IP addresses and
for all load balancer IP addresses defined on the options:router-port’s
logical router, using the options:router-port’s MAC address.
This form of options:nat-addresses is valid for logical switch ports where
options:router-port is the name of a port on a gateway router, or the name
of a distributed gateway port.
Supported only in OVN 2.8 and later. Earlier versions required NAT addresses
to be manually synchronized.
Ethernet address followed by one or more IPv4 addresses
Example: 80:fa:5b:06:72:b7 158.36.44.22 158.36.44.24. This would result in
generation of gratuitous ARPs for IP addresses 158.36.44.22 and 158.36.44.24
with a MAC address of 80:fa:5b:06:72:b7.
This form of options:nat-addresses is only valid for logical switch ports
where options:router-port is the name of a port on a gateway router.
options : exclude-lb-vips-from-garp: optional string
If options:nat-addresses is set to router, Gratuitous ARPs will be sent for all
SNAT and DNAT external IP addresses defined on the options:router-port’s logical
router, using the options:router-port’s MAC address, not cosidering configured load
balancers.
options : arp_proxy: optional string
Optional. A list of MAC and addresses/cidrs or just addresses/cidrs that this
logical switch router port will reply to ARP/NDP requests. Examples:
169.254.239.254 169.254.239.2, 0a:58:a9:fe:01:01 169.254.239.254 169.254.239.2
169.254.238.0/24, fd7b:6b4d:7b25:d22f::1 fd7b:6b4d:7b25:d22f::2, 0a:58:a9:fe:01:01
fd7b:6b4d:7b25:d22f::0/64. Theoptions:router-port’s logical router should have a
route to forward packets sent to configured proxy ARP MAC/IPs to an appropriate
destination.
options : enable_router_port_acl: optional string, either true or false
Optional. Enable conntrack for the router port whose peer is l3dgw_port if set to
true. The default value is false.
options : ct-zone-limit: optional string, containing an integer, in range 0 to
4,294,967,295
CT zone limit value for given Logical_Switch_Port. This value has priority over
limit specified on Logical_Switch when configured. The value 0 means unlimited.
When the option is not present the limit is not set and the zone limit is derived
from OvS default datapath limit.
Options for localnet ports:
These options apply when type is localnet.
options : network_name: optional string
Required. The name of the network to which the localnet port is connected. Each
hypervisor, via ovn-controller, uses its local configuration to determine exactly
how to connect to this locally accessible network, if at all.
options : ethtype: optional string
Optional. VLAN EtherType field value for encapsulating VLAN headers. Supported
values: 802.1q (default), 802.1ad.
options : localnet_learn_fdb: optional string, either true or false
Optional. Allows localnet port to learn MACs and store them in FDB table if set to
true. The default value is false.
Options for l2gateway ports:
These options apply when type is l2gateway.
options : network_name: optional string
Required. The name of the network to which the l2gateway port is connected. The L2
gateway, via ovn-controller, uses its local configuration to determine exactly how
to connect to this network.
options : l2gateway-chassis: optional string
Required. The chassis on which the l2gateway logical port should be bound to.
ovn-controller running on the defined chassis will connect this logical port to the
physical network.
Options for vtep ports:
These options apply when type is vtep.
options : vtep-physical-switch: optional string
Required. The name of the VTEP gateway.
options : vtep-logical-switch: optional string
Required. A logical switch name connected by the VTEP gateway.
VMI (or VIF) Options:
These options apply to logical ports with type having (empty string)
options : requested-chassis: optional string
If set, identifies a specific chassis (by name or hostname) that is allowed to bind
this port. Using this option will prevent thrashing between two chassis trying to
bind the same port during a live migration. It can also prevent similar thrashing
due to a mis-configuration, if a port is accidentally created on more than one
chassis.
If set to a comma separated list, the first entry identifies the main chassis and
the rest are one or more additional chassis that are allowed to bind the same port.
When multiple chassis are set for the port, and the logical switch is connected to
an external network through a localnet port, tunneling is enforced for the port to
guarantee delivery of packets directed to the port to all its locations. This has
MTU implications because the network used for tunneling must have MTU larger than
localnet for stable connectivity.
If the same host co-hosts more than one controller instance (either belonging to
the same or separate clusters), special attention should be given to consistently
using unique chassis names used in this option. It is advised that chassis names -
and not host names - are used for this option.
options : activation-strategy: optional string
If used with multiple chassis set in requested-chassis, specifies an activation
strategy for all additional chassis. By default, no activation strategy is used,
meaning additional port locations are immediately available for use. When set to
"rarp", the port is blocked for ingress and egress communication until a RARP
packet is sent from a new location. The "rarp" strategy is useful in live migration
scenarios for virtual machines.
options : iface-id-ver: optional string
If set, this port will be bound by ovn-controller only if this same key and value
is configured in the external_ids column in the Open_vSwitch database’s Interface
table.
options : qos_min_rate: optional string
If set, indicates the minimum guaranteed rate available for data sent from this
interface, in bit/s.
options : qos_max_rate: optional string
If set, indicates the maximum rate for data sent from this interface, in bit/s. The
traffic will be shaped according to this limit.
options : qos_burst: optional string
If set, indicates the maximum burst size for data sent from this interface, in
bits.
options : hostname: optional string
If set, indicates the DHCPv4 option "Hostname" (option code 12) associated for this
Logical Switch Port. If DHCPv4 is enabled for this Logical Switch Port, hostname
dhcp option will be included in DHCP reply.
options : force_fdb_lookup: optional string, either true or false
This option is supported only if the Logical Switch Port is of default type (i.e.
type set to empty_string) and also addresses column contains unknown. If set to
true, MAC addresses (if configured) are not installed in the l2 lookup table but
the MAC addresses are learnt and stored in the FDB table. The default value is
false.
options : disable_garp_rarp: optional string, either true or false
If set to true, GARP and RARP announcements are not sent when a VIF port is created
on a bridged logical switch. The default value is false.
options : pkt_clone_type: optional string, must be mc_unknown
If set to mc_unknown, packets going to this VIF get cloned to all unknown ports
connected to the same Logical Switch.
options : disable_arp_nd_rsp: optional string, either true or false
If set to true, ARP/ND responder flows are not installed for the IP addresses
configured on this logical port. Default: false.
VIF Plugging Options:
options : vif-plug-type: optional string
If set, OVN will attempt to perform plugging of this VIF. In order to get this port
plugged by the OVN controller, OVN must be built with support for VIF plugging. The
default behavior is for the CMS to do the VIF plugging. Each VIF plug provider have
their own options namespaced by name, for example "vif-plug:representor:key".
Please refer to the VIF plug provider documentation located in
Documentation/topics/vif-plug-providers/ for more information.
options : vif-plug-mtu-request: optional string
Requested MTU for plugged interfaces. When set the OVN controller will fill the
mtu_request column of the Open vSwitch database’s Interface table. This in turn
will make OVS vswitchd update the MTU of the linked interface.
Virtual port Options:
These options apply when type is virtual.
options : virtual-ip: optional string
This option represents the virtual IPv4 address.
options : virtual-parents: optional string
This options represents a set of logical port names (with in the same logical
switch) which can own the virtual ip configured in the options:virtual-ip. All
these virtual parents should add the virtual ip in the port_security if port
security addressed are enabled.
IP Multicast Snooping Options:
These options apply when the port is part of a logical switch which has other_config
:mcast_snoop set to true.
options : mcast_flood: optional string, either true or false
If set to true, multicast packets (except reports) are unconditionally forwarded to
the specific port. Default: false.
options : mcast_flood_reports: optional string, either true or false
If set to true, multicast reports are unconditionally forwarded to the specific
port. Default: false.
Containers:
When a large number of containers are nested within a VM, it may be too expensive to
dedicate a VIF to each container. OVN can use VLAN tags to support such cases. Each
container is assigned a VLAN ID and each packet that passes between the hypervisor and the
VM is tagged with the appropriate ID for the container. Such VLAN IDs never appear on a
physical wire, even inside a tunnel, so they need not be unique except relative to a
single VM on a hypervisor.
These columns are used for VIFs that represent nested containers using shared VIFs. For
VMs and for containers that have dedicated VIFs, they are empty.
parent_name: optional string
The VM interface through which the nested container sends its network traffic. This
must match the name column for some other Logical_Switch_Port. Note: for
performance of the OVN Southbound database conditional monitoring, unlike for
regular VIFs, ovn-controller will register to get updates about all OVN Southbound
database Port_Binding table records that correspond to nested container ports even
if external_ids:ovn-monitor-all is set to false. See ovn-controller(8) for more
information.
tag_request: optional integer, in range 0 to 4,095
The VLAN tag in the network traffic associated with a container’s network
interface. The client can request ovn-northd to allocate a tag that is unique
within the scope of a specific parent (specified in parent_name) by setting a value
of 0 in this column. The allocated value is written by ovn-northd in the tag
column. (Note that these tags are allocated and managed locally in ovn-northd, so
they cannot be reconstructed in the event that the database is lost.) The client
can also request a specific non-zero tag and ovn-northd will honor it and copy that
value to the tag column.
When type is set to localnet or l2gateway, this can be set to indicate that the
port represents a connection to a specific VLAN on a locally accessible network.
The VLAN ID is used to match incoming traffic and is also added to outgoing
traffic.
tag: optional integer, in range 1 to 4,095
The VLAN tag allocated by ovn-northd based on the contents of the tag_request
column.
Port State:
up: optional boolean
This column is populated by ovn-northd, rather than by the CMS plugin as is most of
this database. When a logical port is bound to a physical location in the OVN
Southbound database Binding table, ovn-northd sets this column to true; otherwise,
or if the port becomes unbound later, it sets it to false. If this column is empty,
the port is not considered up. This allows the CMS to wait for a VM’s (or
container’s) networking to become active before it allows the VM (or container) to
start.
Logical ports of router type are an exception to this rule. They are considered to
be always up, that is this column is always set to true.
enabled: optional boolean
This column is used to administratively set port state. If this column is empty or
is set to true, the port is enabled. If this column is set to false, the port is
disabled. A disabled port has all ingress and egress traffic dropped.
Addressing:
addresses: set of strings
Addresses owned by the logical port.
Each element in the set must take one of the following forms:
Ethernet address followed by zero or more IPv4 or IPv6 addresses (or both)
An Ethernet address defined is owned by the logical port. Like a physical
Ethernet NIC, a logical port ordinarily has a single fixed Ethernet address.
When a OVN logical switch processes a unicast Ethernet frame whose
destination MAC address is in a logical port’s addresses column, it delivers
it only to that port, as if a MAC learning process had learned that MAC
address on the port.
If IPv4 or IPv6 address(es) (or both) are defined, it indicates that the
logical port owns the given IP addresses.
If IPv4 address(es) are defined, the OVN logical switch uses this
information to synthesize responses to ARP requests without traversing the
physical network. The OVN logical router connected to the logical switch, if
any, uses this information to avoid issuing ARP requests for logical switch
ports.
Note that the order here is important. The Ethernet address must be listed
before the IP address(es) if defined.
Examples:
80:fa:5b:06:72:b7
This indicates that the logical port owns the above mac address.
80:fa:5b:06:72:b7 10.0.0.4 20.0.0.4
This indicates that the logical port owns the mac address and two
IPv4 addresses.
80:fa:5b:06:72:b7 fdaa:15f2:72cf:0:f816:3eff:fe20:3f41
This indicates that the logical port owns the mac address and 1 IPv6
address.
80:fa:5b:06:72:b7 10.0.0.4 fdaa:15f2:72cf:0:f816:3eff:fe20:3f41
This indicates that the logical port owns the mac address and 1 IPv4
address and 1 IPv6 address.
unknown
This indicates that the logical port has an unknown set of Ethernet
addresses. When an OVN logical switch processes a unicast Ethernet frame
whose destination MAC address is not in any logical port’s addresses column,
it delivers it to the port (or ports) whose addresses columns include
unknown.
dynamic
Use dynamic to make ovn-northd generate a globally unique MAC address,
choose an unused IPv4 address with the logical port’s subnet (if
other_config:subnet is set in the port’s Logical_Switch), and generate an
IPv6 address from the MAC address (if other_config:ipv6_prefix is set in the
port’s Logical_Switch) and store them in the port’s dynamic_addresses
column.
Only one element containing dynamic may appear in addresses.
dynamic ip
dynamic ipv6
dynamic ip ipv6
These act like dynamic alone but specify particular IPv4 or IPv6 addresses to
use. OVN IPAM will still automatically allocate the other address if
configured appropriately. Example: dynamic 192.168.0.1 2001::1.
mac dynamic
This acts like dynamic alone but specifies a particular MAC address to use.
OVN IPAM will still automatically allocate IPv4 or IPv6 addresses, or both, if
configured appropriately. Example: 80:fa:5b:06:72:b7 dynamic
router
Accepted only when type is router. This indicates that the Ethernet, IPv4, and
IPv6 addresses for this logical switch port should be obtained from the
connected logical router port, as specified by router-port in options.
The resulting addresses are used to populate the logical switch’s destination
lookup, and also for the logical switch to generate ARP and ND replies.
If the connected logical router port has a distributed gateway port specified
and the logical router has rules specified in nat with external_mac, then
those addresses are also used to populate the switch’s destination lookup.
Supported only in OVN 2.7 and later. Earlier versions required router
addresses to be manually synchronized.
dynamic_addresses: optional string
Addresses assigned to the logical port by ovn-northd, if dynamic is specified in
addresses. Addresses will be of the same format as those that populate the
addresses column. Note that dynamically assigned addresses are constructed and
managed locally in ovn-northd, so they cannot be reconstructed in the event that
the database is lost.
port_security: set of strings
This column controls the addresses from which the host attached to the logical port
(``the host’’) is allowed to send packets and to which it is allowed to receive
packets. If this column is empty, all addresses are permitted.
Each element in the set must begin with one Ethernet address. This would restrict
the host to sending packets from and receiving packets to the ethernet addresses
defined in the logical port’s port_security column. It also restricts the inner
source MAC addresses that the host may send in ARP and IPv6 Neighbor Discovery
packets. The host is always allowed to receive packets to multicast and broadcast
Ethernet addresses.
Each element in the set may additionally contain one or more IPv4 or IPv6 addresses
(or both), with optional masks. If a mask is given, it must be a CIDR mask. In
addition to the restrictions described for Ethernet addresses above, such an
element restricts the IPv4 or IPv6 addresses from which the host may send and to
which it may receive packets to the specified addresses. A masked address, if the
host part is zero, indicates that the host is allowed to use any address in the
subnet; if the host part is nonzero, the mask simply indicates the size of the
subnet. In addition:
• If any IPv4 address is given, the host is also allowed to receive packets to
the IPv4 local broadcast address 255.255.255.255 and to IPv4 multicast
addresses (224.0.0.0/4). If an IPv4 address with a mask is given, the host
is also allowed to receive packets to the broadcast address in that
specified subnet.
If any IPv4 address is given, the host is additionally restricted to sending
ARP packets with the specified source IPv4 address. (RARP is not
restricted.)
• If any IPv6 address is given, the host is also allowed to receive packets to
IPv6 multicast addresses (ff00::/8).
If any IPv6 address is given, the host is additionally restricted to sending
IPv6 Neighbor Discovery Solicitation or Advertisement packets with the
specified source address or, for solicitations, the unspecified address.
If an element includes an IPv4 address, but no IPv6 addresses, then IPv6 traffic is
not allowed. If an element includes an IPv6 address, but no IPv4 address, then IPv4
and ARP traffic is not allowed.
This column uses the same lexical syntax as the match column in the OVN Southbound
database’s Pipeline table. Multiple addresses within an element may be space or
comma separated.
This column is provided as a convenience to cloud management systems, but all of
the features that it implements can be implemented as ACLs using the ACL table.
Examples:
80:fa:5b:06:72:b7
The host may send traffic from and receive traffic to the specified MAC
address, and to receive traffic to Ethernet multicast and broadcast
addresses, but not otherwise. The host may not send ARP or IPv6 Neighbor
Discovery packets with inner source Ethernet addresses other than the one
specified.
80:fa:5b:06:72:b7 192.168.1.10/24
This adds further restrictions to the first example. The host may send IPv4
packets from or receive IPv4 packets to only 192.168.1.10, except that it
may also receive IPv4 packets to 192.168.1.255 (based on the subnet mask),
255.255.255.255, and any address in 224.0.0.0/4. The host may not send ARPs
with a source Ethernet address other than 80:fa:5b:06:72:b7 or source IPv4
address other than 192.168.1.10. The host may not send or receive any IPv6
(including IPv6 Neighbor Discovery) traffic.
"80:fa:5b:12:42:ba", "80:fa:5b:06:72:b7 192.168.1.10/24"
The host may send traffic from and receive traffic to the specified MAC
addresses, and to receive traffic to Ethernet multicast and broadcast
addresses, but not otherwise. With MAC 80:fa:5b:12:42:ba, the host may send
traffic from and receive traffic to any L3 address. With MAC
80:fa:5b:06:72:b7, the host may send IPv4 packets from or receive IPv4
packets to only 192.168.1.10, except that it may also receive IPv4 packets
to 192.168.1.255 (based on the subnet mask), 255.255.255.255, and any
address in 224.0.0.0/4. The host may not send or receive any IPv6 (including
IPv6 Neighbor Discovery) traffic.
DHCP:
dhcpv4_options: optional weak reference to DHCP_Options
This column defines the DHCPv4 Options to be included by the ovn-controller when it
replies to the DHCPv4 requests. Please see the DHCP_Options table.
dhcpv6_options: optional weak reference to DHCP_Options
This column defines the DHCPv6 Options to be included by the ovn-controller when it
replies to the DHCPv6 requests. Please see the DHCP_Options table.
mirror_rules: set of weak reference to Mirrors
Mirror rules that apply to logical switch port which is the source. Please see the
Mirror table.
ha_chassis_group: optional HA_Chassis_Group
References a row in the OVN Northbound database’s HA_Chassis_Group table. It
indicates the HA chassis group to use if the type is set to external. If type is
not external, this column is ignored.
Naming:
external_ids : neutron:port_name: optional string
This column gives an optional human-friendly name for the port. This name has no
special meaning or purpose other than to provide convenience for human interaction
with the northbound database.
Neutron copies this from its own port object’s name. (Neutron ports do are not
assigned human-friendly names by default, so it will often be empty.)
Tunnel Key:
options : requested-tnl-key: optional string, containing an integer, in range 1 to 32,767
Configures the port binding tunnel key for the port. Usually this is not needed
because ovn-northd will assign an unique key for each port by itself. However, if
it is configured, ovn-northd honors the configured value. The typical use case is
for interconnection: the tunnel keys for ports on transit switches need to be
unique globally, so they are maintained in the global OVN_IC_Southbound database,
and ovn-ic simply syncs the value from OVN_IC_Southbound through this config.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
The ovn-northd program copies all these pairs into the external_ids column of the
Port_Binding table in OVN_Southbound database.
Forwarding_Group TABLE
Each row represents one forwarding group.
Summary:
name string
vip string
vmac string
liveness boolean
child_port set of 1 or more strings
Common Columns:
external_ids map of string-string pairs
Details:
name: string
A name for the forwarding group. This name has no special meaning or purpose other
than to provide convenience for human interaction with the ovn-nb database.
vip: string
The virtual IP address assigned to the forwarding group. It will respond with vmac
when an ARP request is sent for vip.
vmac: string
The virtual MAC address assigned to the forwarding group.
liveness: boolean
If set to true, liveness is enabled for child ports otherwise it is disabled.
child_port: set of 1 or more strings
List of child ports in the forwarding group.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Address_Set TABLE
Each row in this table represents a named set of addresses. An address set may contain
Ethernet, IPv4, or IPv6 addresses with optional bitwise or CIDR masks. Address set may
ultimately be used in ACLs to compare against fields such as ip4.src or ip6.src. A single
address set must contain addresses of the same type. As an example, the following would
create an address set with three IP addresses:
ovn-nbctl create Address_Set name=set1 addresses=’10.0.0.1 10.0.0.2 10.0.0.3’
Address sets may be used in the match column of the ACL table. For syntax information, see
the details of the expression language used for the match column in the Logical_Flow table
of the OVN_Southbound database.
Summary:
name string (must be unique within table)
addresses set of strings
Common Columns:
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
A name for the address set. Names are ASCII and must match
[a-zA-Z_.][a-zA-Z_.0-9]*.
addresses: set of strings
The set of addresses in string form.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Port_Group TABLE
Each row in this table represents a named group of logical switch ports.
Port groups may be used in the match column of the ACL table. For syntax information, see
the details of the expression language used for the match column in the Logical_Flow table
of the OVN_Southbound database.
For each port group, there are two address sets generated to the Address_Set table of the
OVN_Southbound database, containing the IP addresses of the group of ports, one for IPv4,
and the other for IPv6, with name being the name of the Port_Group followed by a suffix
_ip4 for IPv4 and _ip6 for IPv6. The generated address sets can be used in the same way as
regular address sets in the match column of the ACL table. For syntax information, see the
details of the expression language used for the match column in the Logical_Flow table of
the OVN_Southbound database.
Summary:
name string (must be unique within table)
ports set of weak reference to Logical_Switch_Ports
acls set of ACLs
Common Columns:
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
A name for the port group. Names are ASCII and must match [a-zA-Z_.][a-zA-Z_.0-9]*.
ports: set of weak reference to Logical_Switch_Ports
The logical switch ports belonging to the group in uuids.
acls: set of ACLs
Access control rules that apply to the port group. Applying an ACL to a port group
has the same effect as applying the ACL to all logical lswitches that the ports of
the port group belong to.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Load_Balancer TABLE
Each row represents one load balancer.
Summary:
name string
vips map of string-string pairs
protocol optional string, one of sctp, tcp, or udp
Health Checks:
health_check set of Load_Balancer_Health_Checks
ip_port_mappings map of string-string pairs
selection_fields set of strings, one of eth_dst, eth_src, ip_dst, ip_src,
tp_dst, or tp_src
Common Columns:
external_ids map of string-string pairs
Load_Balancer options:
options : reject optional string, either true or false
options : hairpin_snat_ip optional string
options : skip_snat optional string
options : add_route optional string
options : neighbor_responder
optional string
options : template optional string
options : address-family optional string
options : affinity_timeout optional string
options : ct_flush optional string, either true or false
Details:
name: string
A name for the load balancer. This name has no special meaning or purpose other
than to provide convenience for human interaction with the ovn-nb database.
vips: map of string-string pairs
A map of virtual IP addresses (and an optional port number with : as a separator)
associated with this load balancer and their corresponding endpoint IP addresses
(and optional port numbers with : as separators) separated by commas. If the
destination IP address (and port number) of a packet leaving a container or a VM
matches the virtual IP address (and port number) provided here as a key, then OVN
will statefully replace the destination IP address by one of the provided IP
address (and port number) in this map as a value. IPv4 and IPv6 addresses are
supported for load balancing; however a VIP of one address family may not be mapped
to a destination IP address of a different family. If specifying an IPv6 address
with a port, the address portion must be enclosed in square brackets. Examples for
keys are "192.168.1.4" and "[fd0f::1]:8800". Examples for value are "10.0.0.1,
10.0.0.2" and "20.0.0.10:8800, 20.0.0.11:8800".
When the Load_Balancer is added to the logical_switch, the VIP has to be in a
different subnet than the one used for the logical_switch. Since VIP is in a
different subnet, you should connect your logical switch to either a OVN logical
router or a real router (this is because the client can now send a packet with VIP
as the destination IP address and router’s mac address as the destination MAC
address).
protocol: optional string, one of sctp, tcp, or udp
Valid protocols are tcp, udp, or sctp. This column is useful when a port number is
provided as part of the vips column. If this column is empty and a port number is
provided as part of vips column, OVN assumes the protocol to be tcp.
Health Checks:
OVN supports health checks for load balancer endpoints. When health checks are enabled,
the load balancer uses only healthy endpoints.
Suppose that vips contains a key-value pair 10.0.0.10:80=10.0.0.4:8080,20.0.0.4:8080. To
enable health checks for this virtual’s endpoints, add two key-value pairs to
ip_port_mappings, with keys 10.0.0.4 and 20.0.0.4, and add to health_check a reference to
a Load_Balancer_Health_Check row whose vip is set to 10.0.0.10. The same approach can be
used for IPv6 as well.
health_check: set of Load_Balancer_Health_Checks
Load balancer health checks associated with this load balancer.
ip_port_mappings: map of string-string pairs
Maps from endpoint IP to a colon-separated pair of logical port name and source IP,
e.g. port_name:sourc_ip for IPv4. Health checks are sent to this port with the
specified source IP. For IPv6 square brackets must be used around IP address, e.g:
port_name:[sourc_ip]
For example, in the example above, IP to port mappings might be defined as
10.0.0.4=sw0-p1:10.0.0.2 and 20.0.0.4=sw1-p1:20.0.0.2, if the values given were
suitable ports and IP addresses.
For IPv6 IP to port mappings might be defined as [2001::1]=sw0-p1:[2002::1].
selection_fields: set of strings, one of eth_dst, eth_src, ip_dst, ip_src, tp_dst, or
tp_src
OVN native load balancers are supported using the OpenFlow groups of type select.
OVS supports two selection methods: dp_hash and hash (with optional fields
specified) in selecting the buckets of a group. Please see the OVS documentation
(man ovs-ofctl) for more details on the selection methods. Each endpoint IP (and
port if set) is mapped to a bucket in the group flow.
CMS can choose the hash selection method by setting the selection fields in this
column. ovs-vswitchd uses the specified fields in generating the hash.
dp_hash selection method uses the assistance of datapath to calculate the hash and
it is expected to be faster than hash selection method. So CMS should take this
into consideration before using the hash method. Please consult the OVS
documentation and OVS sources for the implementation details.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Load_Balancer options:
options : reject: optional string, either true or false
If the load balancer is created with --reject option and it has no active backends,
a TCP reset segment (for tcp) or an ICMP port unreachable packet (for all other
kind of traffic) will be sent whenever an incoming packet is received for this
load-balancer. Please note using --reject option will disable empty_lb SB
controller event for this load balancer.
options : hairpin_snat_ip: optional string
IP to be used as source IP for packets that have been hair-pinned after load
balancing. The default behavior when the option is not set is to use the load
balancer VIP as source IP. This option may have exactly one IPv4 and/or one IPv6
address on it, separated by a space character.
options : skip_snat: optional string
If the load balancing rule is configured with skip_snat option, the option
lb_force_snat_ip configured for the logical router that references this load
balancer will not be applied for this load balancer.
options : add_route: optional string
If set to true, then neighbor routers will have logical flows added that will allow
for routing to the VIP IP. It also will have ARP resolution logical flows added. By
setting this option, it means there is no reason to create a
Logical_Router_Static_Route from neighbor routers to this NAT address. It also
means that no ARP request is required for neighbor routers to learn the IP-MAC
mapping for this VIP IP. For more information about what flows are added for IP
routes, please see the ovn-northd manpage section on IP Routing.
options : neighbor_responder: optional string
If set to all, then routers on which the load balancer is applied reply to
ARP/neighbor discovery requests for all VIPs of the load balancer. If set to
reachable, then routers on which the load balancer is applied reply to ARP/neighbor
discovery requests only for VIPs that are part of a router’s subnet. If set to
none, then routers on which the load balancer is applied never reply to
ARP/neighbor discovery requests for any of the load balancer VIPs. Load balancers
with options:template=true do not support reachable as a valid mode. The default
value of this option, if not specified, is reachable for regular load balancers and
none for template load balancers.
options : template: optional string
Option to be set to true, if the load balancer is a template. The load balancer
VIPs and backends must be using Chassis_Template_Var in their definitions.
Load balancer template VIP supported formats are:
^VIP_VAR[:^PORT_VAR|:port]
where VIP_VAR and PORT_VAR are keys of the Chassis_Template_Var variables records.
Note: The VIP and PORT cannot be combined into a single template variable. For
example, a Chassis_Template_Var variable expanding to 10.0.0.1:8080 is not valid if
used as VIP.
Load balancer template backend supported formats are:
^BACKEND_VAR1[:^PORT_VAR1|:port],^BACKEND_VAR2[:^PORT_VAR2|:port]
or
^BACKENDS_VAR1,^BACKENDS_VAR2
where BACKEND_VAR1, PORT_VAR1, BACKEND_VAR2, PORT_VAR2, BACKENDS_VAR1 and
BACKENDS_VAR2 are keys of the Chassis_Template_Var variables records.
options : address-family: optional string
Address family used by the load balancer. Supported values are ipv4 and ipv6. The
address-family is only used for load balancers with options:template=true. For
explicit load balancers, setting the address-family has no effect.
options : affinity_timeout: optional string
If the CMS provides a positive value (in seconds) for affinity_timeout, OVN will
dnat connections received from the same client to this lb to the same backend if
received in the affinity timeslot. Max supported affinity_timeout is 65535 seconds.
options : ct_flush: optional string, either true or false
The value indicates whether ovn-controller should flush CT entries that are related
to this LB. The flush happens if the LB is removed, any of the backends is
updated/removed or the LB is not considered local anymore by the ovn-controller.
This option is set to false by default.
Load_Balancer_Group TABLE
Each row represents a logical grouping of load balancers. It is up to the CMS to decide
the criteria on which load balancers are grouped together. To simplify configuration and
to optimize its processing load balancers that must be associated to the same set of
logical switches and/or logical routers should be grouped together.
Summary:
name string (must be unique within table)
load_balancer set of weak reference to Load_Balancers
Details:
name: string (must be unique within table)
A name for the load balancer group. This name has no special meaning or purpose
other than to provide convenience for human interaction with the ovn-nb database.
load_balancer: set of weak reference to Load_Balancers
A set of load balancers.
Load_Balancer_Health_Check TABLE
Each row represents one load balancer health check.
Summary:
vip string
Health check options:
options : interval optional string, containing an integer
options : timeout optional string, containing an integer
options : success_count optional string, containing an integer
options : failure_count optional string, containing an integer
Common Columns:
external_ids map of string-string pairs
Details:
vip: string
vip whose endpoints should be monitored for health check.
Health check options:
options : interval: optional string, containing an integer
The interval, in seconds, between health checks.
options : timeout: optional string, containing an integer
The time, in seconds, after which a health check times out.
options : success_count: optional string, containing an integer
The number of successful checks after which the endpoint is considered online.
options : failure_count: optional string, containing an integer
The number of failure checks after which the endpoint is considered offline.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
ACL TABLE
Each row in this table represents one ACL rule for a logical switch or a port group that
points to it through its acls column. The action column for the highest-priority matching
row in this table determines a packet’s treatment. If no row matches, packets are allowed
by default. (Default-deny treatment is possible: add a rule with priority 0, 1 as match,
and deny as action.)
Summary:
label integer, in range 0 to 4,294,967,295
priority integer, in range 0 to 32,767
direction string, either from-lport or to-lport
match string
action string, one of allow-related, allow-stateless, allow, drop,
pass, or reject
tier integer, in range 0 to 3
options:
options : apply-after-lb optional string
Logging:
log boolean
name optional string, at most 63 characters long
severity optional string, one of alert, debug, info, notice, or
warning
meter optional string
sample_new optional Sample
sample_est optional Sample
Common Columns:
options map of string-string pairs
ACL configuration options:
options : log-related optional string
external_ids map of string-string pairs
Details:
label: integer, in range 0 to 4,294,967,295
Associates an identifier with the ACL. The same value will be written to
corresponding connection tracker entry. The value should be a valid 32-bit unsigned
integer. This value can help in debugging from connection tracker side. For
example, through this "label" we can backtrack to the ACL rule which is causing a
"leaked" connection. Connection tracker entries are created only for allowed
connections so the label is valid only for allow and allow-related actions.
Note: if an ACL has both sampling enabled and a label associated to it then the
label value overrides the observation point ID defined in the sample_new or
sample_est configuration.
priority: integer, in range 0 to 32,767
The ACL rule’s priority. Rules with numerically higher priority take precedence
over those with lower. If two ACL rules with the same priority both match, then the
one actually applied to a packet is undefined.
Return traffic from an allow-related flow is always allowed and cannot be changed
through an ACL.
allow-stateless flows always take precedence before stateful ACLs, regardless of
their priority. (Both allow and allow-related ACLs can be stateful.)
direction: string, either from-lport or to-lport
Direction of the traffic to which this rule should apply:
• from-lport: Used to implement filters on traffic arriving from a logical
port. These rules are applied to the logical switch’s ingress pipeline.
• to-lport: Used to implement filters on traffic forwarded to a logical port.
These rules are applied to the logical switch’s egress pipeline.
match: string
The packets that the ACL should match, in the same expression language used for the
match column in the OVN Southbound database’s Logical_Flow table. The outport
logical port is only available in the to-lport direction (the inport is available
in both directions).
By default all traffic is allowed. When writing a more restrictive policy, it is
important to remember to allow flows such as ARP and IPv6 neighbor discovery
packets.
Note that you can not create an ACL matching on a port with type=router or
type=localnet.
action: string, one of allow-related, allow-stateless, allow, drop, pass, or reject
The action to take when the ACL rule matches:
• allow-stateless: Always forward the packet in stateless manner, omitting
connection tracking mechanism, regardless of other rules defined for the
switch. May require defining additional rules for inbound replies. For
example, if you define a rule to allow outgoing TCP traffic directed to an
IP address, then you probably also want to define another rule to allow
incoming TCP traffic coming from this same IP address. In addition, traffic
that matches stateless ACLs will bypass load-balancer DNAT/un-DNAT
processing. Stateful ACLs should be used instead if the traffic is supposed
to be load-balanced.
• allow: Forward the packet. It will also send the packets through connection
tracking when allow-related rules exist on the logical switch. Otherwise,
it’s equivalent to allow-stateless.
• allow-related: Forward the packet and related traffic (e.g. inbound replies
to an outbound connection).
• drop: Silently drop the packet.
• reject: Drop the packet, replying with a RST for TCP or ICMPv4/ICMPv6
unreachable message for other IPv4/IPv6-based protocols.
• pass: Pass to the next ACL tier. If using multiple ACL tiers, a match on
this ACL will stop evaluating ACLs at the current tier and move to the next
one. If not using ACL tiers or if a pass ACL is matched at the final tier,
then the options:default_acl_drop option from the NB_Global table is used to
determine how to proceed.
tier: integer, in range 0 to 3
The hierarchical tier that this ACL belongs to.
ACLs can be assigned to numerical tiers. When evaluating ACLs, an internal counter
is used to determine which tier of ACLs should be evaluated. Tier 0 ACLs are
evaluated first. If no verdict can be determined, then tier 1 ACLs are evaluated
next. This continues until the maximum tier value is reached. If all tiers of ACLs
are evaluated and no verdict is reached, then the options:default_acl_drop option
from table NB_Global is used to determine how to proceed.
In this version of OVN, the maximum tier value for ACLs is 3, meaning there are 4
tiers of ACLs allowed (0-3).
options:
ACLs options.
options : apply-after-lb: optional string
If set to true, the ACL will be applied after load balancing stage. Supported only
for from-lport direction.
The main use case of this option is to support ACLs matching on the destination IP
address of the packet for the backend IPs of load balancers.
OVN will apply the from-lport ACLs in two stages. ACLs without this option
apply-after-lb set, will be applied before the load balancer stage and ACLs with
this option set will be applied after the load balancer stage. The priorities are
indepedent between these stages and may not be obvious to the CMS. Hence CMS should
be extra careful when using this option and should carefully evaluate the
priorities of all the ACLs and the default deny/allow ACLs if any.
Logging:
These columns control whether and how OVN logs packets that match an ACL.
log: boolean
If set to true, packets that match the ACL will trigger a log message on the
transport node or nodes that perform ACL processing. Logging may be combined with
any action.
If set to false, the remaining columns in this group have no significance.
name: optional string, at most 63 characters long
This name, if it is provided, is included in log records. It provides the
administrator and the cloud management system a way to associate a log record with
a particular ACL.
severity: optional string, one of alert, debug, info, notice, or warning
The severity of the ACL. The severity levels match those of syslog, in decreasing
level of severity: alert, warning, notice, info, or debug. When the column is
empty, the default is info.
meter: optional string
The name of a meter to rate-limit log messages for the ACL. The string must match
the name column of a row in the Meter table. By default, log messages are not rate-
limited. In order to ensure that the same Meter rate limits multiple ACL logs
separately, set the fair column.
sample_new: optional Sample
The entry in the Sample table to use for sampling for new sessions matched by this
ACL. In case the ACL is stateless this is used for sampling all traffic matched by
the ACL.
Note: if an ACL has both sampling enabled and a label associated to it then the
label value overrides the observation point ID defined in the sample_new
configuration.
sample_est: optional Sample
The entry in the Sample table to use for sampling for established/related sessions
matched by this ACL.
Note: if an ACL has both sampling enabled and a label associated to it then the
label value overrides the observation point ID defined in the sample_est
configuration.
Common Columns:
options: map of string-string pairs
This column provides general key/value settings. The supported options are
described individually below.
ACL configuration options:
options : log-related: optional string
If set to true, then log when reply or related traffic is admitted from a stateful
ACL. In order for this option to function, the log option must be set to true and a
label must be set, and it must be unique to the ACL. The label is necessary as it
is the only means to associate the reply traffic with the ACL to which it belongs.
It must be unique, because otherwise it is ambiguous which ACL will be matched.
Note: If this option is enabled, an extra flow is installed in order to log the
related traffic. Therefore, if this is enabled on all ACLs, then the total number
of flows necessary to log the ACL traffic is doubled, compared to if this option is
not enabled.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Logical_Router TABLE
Each row represents one L3 logical router.
Summary:
ports set of Logical_Router_Ports
static_routes set of Logical_Router_Static_Routes
policies set of Logical_Router_Policys
enabled optional boolean
nat set of NATs
load_balancer set of weak reference to Load_Balancers
load_balancer_group set of Load_Balancer_Groups
Naming:
name string
external_ids : neutron:router_name
optional string
copp optional weak reference to Copp
Options:
options : chassis optional string
options : dnat_force_snat_ip
optional string
options : lb_force_snat_ip optional string
options : mcast_relay optional string, either true or false
options : dynamic_neigh_routers
optional string, either true or false
options : always_learn_from_arp_request
optional string, either true or false
options : requested-tnl-key
optional string, containing an integer, in range 1 to
16,777,215
options : snat-ct-zone optional string, containing an integer, in range 0 to 65,535
options : mac_binding_age_threshold
optional string
options : ct-zone-limit optional string, containing an integer, in range 0 to
4,294,967,295
Common Columns:
external_ids map of string-string pairs
Details:
ports: set of Logical_Router_Ports
The router’s ports.
static_routes: set of Logical_Router_Static_Routes
Zero or more static routes for the router.
policies: set of Logical_Router_Policys
Zero or more routing policies for the router.
enabled: optional boolean
This column is used to administratively set router state. If this column is empty
or is set to true, the router is enabled. If this column is set to false, the
router is disabled. A disabled router has all ingress and egress traffic dropped.
nat: set of NATs
One or more NAT rules for the router. NAT rules only work on Gateway routers, and
on distributed routers with one and only one distributed gateway port.
load_balancer: set of weak reference to Load_Balancers
Set of load balancers associated to this logical router. Load balancer Load
balancer rules only work on the Gateway routers or routers with one and only one
distributed gateway port.
load_balancer_group: set of Load_Balancer_Groups
Set of load balancers groups associated to this logical router.
Naming:
These columns provide names for the logical router. From OVN’s perspective, these names
have no special meaning or purpose other than to provide convenience for human interaction
with the northbound database. There is no requirement for the name to be unique. (For a
unique identifier for a logical router, use its row UUID.)
(Originally, name was intended to serve the purpose of a human-friendly name, but the
Neutron integration used it to uniquely identify its own router object, in the format
neutron-uuid. Later on, Neutron started propagating the friendly name of a router as
external_ids:neutron:router_name. Perhaps this can be cleaned up someday.)
name: string
A name for the logical router.
external_ids : neutron:router_name: optional string
Another name for the logical router.
copp: optional weak reference to Copp
The control plane protection policy from table Copp used for metering packets sent
to ovn-controller from logical ports of this router.
Options:
Additional options for the logical router.
options : chassis: optional string
If set, indicates that the logical router in question is a Gateway router (which is
centralized) and resides in the set chassis. The same value is also used by
ovn-controller to uniquely identify the chassis in the OVN deployment and comes
from external_ids:system-id in the Open_vSwitch table of Open_vSwitch database.
The Gateway router can only be connected to a distributed router via a switch if
SNAT and DNAT are to be configured in the Gateway router.
options : dnat_force_snat_ip: optional string
If set, indicates a set of IP addresses to use to force SNAT a packet that has
already been DNATed in the gateway router. When multiple gateway routers are
configured, a packet can potentially enter any of the gateway router, get DNATted
and eventually reach the logical switch port. For the return traffic to go back to
the same gateway router (for unDNATing), the packet needs a SNAT in the first
place. This can be achieved by setting the above option with a gateway specific set
of IP addresses. This option may have exactly one IPv4 and/or one IPv6 address on
it, separated by a a space.
options : lb_force_snat_ip: optional string
If set, this option can take two possible type of values. Either a set of IP
addresses or the string value - router_ip.
If a set of IP addresses are configured, it indicates to use to force SNAT a packet
that has already been load-balanced in the gateway router. When multiple gateway
routers are configured, a packet can potentially enter any of the gateway routers,
get DNATted as part of the load-balancing and eventually reach the logical switch
port. For the return traffic to go back to the same gateway router (for unDNATing),
the packet needs a SNAT in the first place. This can be achieved by setting the
above option with a gateway specific set of IP addresses. This option may have
exactly one IPv4 and/or one IPv6 address on it, separated by a space character.
If it is configured with the value router_ip, then the load balanced packet is
SNATed with the IP of router port (attached to the gateway router) selected as the
destination after taking the routing decision.
options : mcast_relay: optional string, either true or false
Enables/disables IP multicast relay between logical switches connected to the
logical router. Default: False.
options : dynamic_neigh_routers: optional string, either true or false
If set to true, the router will resolve neighbor routers’ MAC addresses only by
dynamic ARP/ND, instead of prepopulating static mappings for all neighbor routers
in the ARP/ND Resolution stage. This reduces number of flows, but requires ARP/ND
messages to resolve the IP-MAC bindings when needed. It is false by default. It is
recommended to set to true when a large number of logical routers are connected to
the same logical switch but most of them never need to send traffic between each
other. By default, ovn-northd does not create mappings to NAT and load balancer
addresess. However, for NAT and load balancer addresses that have the add_route
option added, ovn-northd will create logical flows that map NAT and load balancer
IP addresses to the appropriate MAC address. Setting dynamic_neigh_routers to true
will prevent the automatic creation of these logical flows.
options : always_learn_from_arp_request: optional string, either true or false
This option controls the behavior when handling IPv4 ARP requests or IPv6 ND-NS
packets - whether a dynamic neighbor (MAC binding) entry is added/updated.
true - Always learn the MAC-IP binding, and add/update the MAC binding entry.
false - If there is a MAC binding for that IP and the MAC is different, or, if TPA
of ARP request belongs to any router port on this router, then update/add that MAC-
IP binding. Otherwise, don’t update/add entries.
It is true by default. It is recommended to set to false when a large number of
logical routers are connected to the same logical switch but most of them never
need to send traffic between each other, to reduce the size of the MAC binding
table.
options : requested-tnl-key: optional string, containing an integer, in range 1 to
16,777,215
Configures the datapath tunnel key for the logical router. This is not needed
because ovn-northd will assign an unique key for each datapath by itself. However,
if it is configured, ovn-northd honors the configured value.
options : snat-ct-zone: optional string, containing an integer, in range 0 to 65,535
Use the requested conntrack zone for SNAT with this router. This can be useful if
egress traffic from the host running OVN comes from both OVN and other sources.
This way, OVN and the other sources can make use of the same conntrack zone.
options : mac_binding_age_threshold: optional string
Specifies the MAC binding aging thresholds based on CIDRs, with the format:
entry[;entry[...]], where each entry has the format: [cidr:]threshold
• cidr: Can be either an IPv4 or IPv6 CIDR.
• threshold: Threshold value in seconds. MAC bindings with IP addresses
matching the specified CIDR that exceed this timeout will be automatically
removed.
If an entry is provided without an CIDR (just the threshold value), it specifies
the default threshold for MAC bindings that don’t match any of the given CIDRs. If
there are multiple default threshold entries in the option, the behavior is
undefined.
If there are multiple CIDRs matching a MAC binding IP, the one with the longest
prefix length takes effect. If there are multiple entries with the same CIDR in the
option, the behavior is undefined.
If no matching CIDR is found for a MAC binding IP, and no default threshold is
specified, the behavior defaults to the original: the binding will not be removed
based on age.
The value can also default to an empty string, which means that the aging threshold
is disabled. Any string not in the above format is regarded as invalid and the
aging is disabled.
Example: 192.168.0.0/16:300;192.168.10.0/24:0;fe80::/10:600;1200
This sets a threshold of 300 seconds for MAC bindings with IP addresses in the
192.168.0.0/16 range, excluding the 192.168.1.0/24 range (for which the aging is
disabled), a threshold of 600 seconds for MAC bindings with IP addresses in the
fe80::/10 IPv6 range, and a default threshold of 1200 seconds for all other MAC
bindings.
options : ct-zone-limit: optional string, containing an integer, in range 0 to
4,294,967,295
CT zone limit value for given Logical_Router. The value 0 means unlimited. When the
option is not present the limit is not set and the zone limit is derived from OvS
default datapath limit.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
QoS TABLE
Each row in this table represents one QoS rule for a logical switch that points to it
through its qos_rules column. Two types of QoS are supported: DSCP marking and metering. A
match with the highest-priority will have QoS applied to it. If the action column is
specified, then matching packets will have DSCP marking applied. If the bandwidth column
is specified, then matching packets will have metering applied. action and bandwidth are
not exclusive, so both marking and metering by defined for the same QoS entry. If no row
matches, packets will not have any QoS applied.
Summary:
priority integer, in range 0 to 32,767
direction string, either from-lport or to-lport
match string
action map of string-integer pairs, key either dscp or mark, value
in range 0 to 4,294,967,295
bandwidth map of string-integer pairs, key either burst or rate, value
in range 1 to 4,294,967,295
external_ids map of string-string pairs
Details:
priority: integer, in range 0 to 32,767
The QoS rule’s priority. Rules with numerically higher priority take precedence
over those with lower. If two QoS rules with the same priority both match, then the
one actually applied to a packet is undefined.
direction: string, either from-lport or to-lport
The value of this field is similar to ACL column in the OVN Northbound database’s
ACL table.
match: string
The packets that the QoS rules should match, in the same expression language used
for the match column in the OVN Southbound database’s Logical_Flow table. The
outport logical port is only available in the to-lport direction (the inport is
available in both directions).
action: map of string-integer pairs, key either dscp or mark, value in range 0 to
4,294,967,295
When dscp action is specified, matching flows will have have DSCP marking applied.
When mark action is specified, matching flows will have packet marking applied.
• dscp: The value of this action should be in the range of 0 to 63
(inclusive).
• mark: The value of this action should be a positive integer.
bandwidth: map of string-integer pairs, key either burst or rate, value in range 1 to
4,294,967,295
When specified, matching packets will have bandwidth metering applied. Traffic over
the limit will be dropped.
• rate: The value of rate limit in kbps.
• burst: The value of burst rate limit in kilobits. This is optional and needs
to specify the rate.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Mirror TABLE
Each row in this table represents a mirror that can be used for port mirroring. These
mirrors are referenced by the mirror_rules column in the Logical_Switch_Port table.
Summary:
name string (must be unique within table)
filter string, one of both, from-lport, or to-lport
sink string
type string, one of erspan, gre, or local
index integer
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
Represents the name of the mirror.
filter: string, one of both, from-lport, or to-lport
The value of this field represents selection criteria of the mirror. to-lport
mirrors the packets coming into logical port. from-lport mirrors the packets going
out of logical port. both mirrors for both directions.
sink: string
The value of this field represents the destination/sink of the mirror. If the type
is gre or erspan, the value indicates the tunnel remote IP (either IPv4 or IPv6).
For a type of local, this field defines a local interface on the OVS integration
bridge to be used as the mirror destination. The interface must possess external-
ids:mirror-id that matches this string.
type: string, one of erspan, gre, or local
The value of this field specifies the mirror type - gre, erspan or local.
index: integer
The value of this field represents the tunnel ID. If the configured tunnel type is
gre, this field represents the GRE key value and if the configured tunnel type is
erspan it represents the erspan_idx value. It is ignored if the type is local.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Meter TABLE
Each row in this table represents a meter that can be used for QoS or rate-limiting.
Summary:
name string (must be unique within table)
unit string, either kbps or pktps
bands set of 1 or more Meter_Bands
fair optional boolean
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
A name for this meter.
Names that begin with "__" (two underscores) are reserved for OVN internal use and
should not be added manually.
unit: string, either kbps or pktps
The unit for rate and burst_rate parameters in the bands entry. kbps specifies
kilobits per second, and pktps specifies packets per second.
bands: set of 1 or more Meter_Bands
The bands associated with this meter. Each band specifies a rate above which the
band is to take the action action. If multiple bands’ rates are exceeded, then the
band with the highest rate among the exceeded bands is selected.
fair: optional boolean
This column is used to further describe the desired behavior of the meter when
there are multiple references to it. If this column is empty or is set to false,
the rate will be shared across all rows that refer to the same Meter name.
Conversely, when this column is set to true, each user of the same Meter will be
rate-limited on its own.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Meter_Band TABLE
Each row in this table represents a meter band which specifies the rate above which the
configured action should be applied. These bands are referenced by the bands column in the
Meter table.
Summary:
action string, must be drop
rate integer, in range 1 to 4,294,967,295
burst_size integer, in range 0 to 4,294,967,295
external_ids map of string-string pairs
Details:
action: string, must be drop
The action to execute when this band matches. The only supported action is drop.
rate: integer, in range 1 to 4,294,967,295
The rate limit for this band, in kilobits per second or bits per second, depending
on whether the parent Meter entry’s unit column specified kbps or pktps.
burst_size: integer, in range 0 to 4,294,967,295
The maximum burst allowed for the band in kilobits or packets, depending on whether
kbps or pktps was selected in the parent Meter entry’s unit column. If the size is
zero, the switch is free to select some reasonable value depending on its
configuration.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Logical_Router_Port TABLE
A port within an L3 logical router.
Exactly one Logical_Router row must reference a given logical router port.
Summary:
name string (must be unique within table)
networks set of 1 or more strings
mac string
enabled optional boolean
dhcp_relay optional DHCP_Relay
Distributed Gateway Ports:
ha_chassis_group optional HA_Chassis_Group
gateway_chassis set of Gateway_Chassises
Options for Physical VLAN MTU Issues:
options : reside-on-redirect-chassis
optional string, either true or false
options : redirect-type optional string, either bridged or overlay
ipv6_prefix set of strings
ipv6_ra_configs:
ipv6_ra_configs : address_mode
optional string
ipv6_ra_configs : router_preference
optional string
ipv6_ra_configs : route_info
optional string
ipv6_ra_configs : mtu optional string
ipv6_ra_configs : send_periodic
optional string
ipv6_ra_configs : max_interval
optional string
ipv6_ra_configs : min_interval
optional string
ipv6_ra_configs : rdnss optional string
ipv6_ra_configs : dnssl optional string
Options:
options : mcast_flood optional string, either true or false
options : requested-tnl-key
optional string, containing an integer, in range 1 to 32,767
options : prefix_delegation
optional string, either true or false
options : prefix optional string, either true or false
options : route_table optional string
options : gateway_mtu optional string, containing an integer, in range 68 to
65,535
options : routing-protocol-redirect
optional string
options : routing-protocols
optional string
options : gateway_mtu_bypass
optional string
options : centralize_routing
optional string, either true or false
Attachment:
peer optional string
Common Columns:
external_ids map of string-string pairs
Status:
status : hosting-chassis optional string
Details:
name: string (must be unique within table)
A name for the logical router port.
In addition to provide convenience for human interaction with the northbound
database, this column is used as reference by its patch port in Logical_Switch_Port
or another logical router port in Logical_Router_Port.
A logical router port may not have the same name as a logical switch port, but the
database schema cannot enforce this.
networks: set of 1 or more strings
The IP addresses and netmasks of the router. For example, 192.168.0.1/24 indicates
that the router’s IP address is 192.168.0.1 and that packets destined to
192.168.0.x should be routed to this port.
A logical router port always adds a link-local IPv6 address (fe80::/64)
automatically generated from the interface’s MAC address using the modified EUI-64
format.
mac: string
The Ethernet address that belongs to this router port.
enabled: optional boolean
This column is used to administratively set port state. If this column is empty or
is set to true, the port is enabled. If this column is set to false, the port is
disabled. A disabled port has all ingress and egress traffic dropped.
dhcp_relay: optional DHCP_Relay
This column is used to enabled DHCP Relay. Please refer to DHCP_Relay table.
Distributed Gateway Ports:
Gateways, as documented under Gateways in the OVN architecture guide, provide limited
connectivity between logical networks and physical ones. OVN support multiple kinds of
gateways. The Logical_Router_Port table can be used two different ways to configure
distributed gateway ports, which are one kind of gateway. These two forms of configuration
exist for historical reasons. Both of them produce the same kind of OVN southbound records
and the same behavior in practice.
If either of these are set, this logical router port represents a distributed gateway port
that connects this router to a logical switch with a localnet port or a connection to
another OVN deployment.
Also mentioned in the OVN architecture guide, distributed gateway ports can also be used
for scalability reasons in deployments where logical switches are dedicated to chassises
rather than distributed.
The preferred way to configure a gateway is ha_chassis_group, but gateway_chassis is also
supported for backward compatibility. Only one of these should be set at a time on a given
LRP, since they configure the same features.
Even when a gateway is configured, the logical router port still effectively resides on
each chassis. However, due to the implications of the use of L2 learning in the physical
network, as well as the need to support advanced features such as one-to-many NAT (aka IP
masquerading), a subset of the logical router processing is handled in a centralized
manner on the gateway chassis.
There can be more than one distributed gateway ports configured on each logical router,
each connecting to different L2 segments. Load-balancing is not yet supported on logical
routers with more than one distributed gateway ports.
For each distributed gateway port, it may have more than one gateway chassises. When more
than one gateway chassis is specified, OVN only uses one at a time. OVN can rely on OVS
BFD implementation to monitor gateway connectivity, preferring the highest-priority
gateway that is online. Priorities are specified in the priority column of Gateway_Chassis
or HA_Chassis.
ovn-northd programs the external_mac rules specified in the LRP’s LR into the peer logical
switch’s destination lookup on the chassis where the logical_port resides. In addition,
the logical router’s MAC address is automatically programmed in the peer logical switch’s
destination lookup flow on the gateway chasssis. If it is desired to generate gratuitous
ARPs for NAT addresses, then set the peer LSP’s options:nat-addresses to router.
OVN 20.03 and earlier supported a third way to configure distributed gateway ports using
options:redirect-chassis to specify the gateway chassis. This method is no longer
supported. Any remaining users should switch to one of the newer methods instead. A
gateway_chassis may be easily configured from the command line, e.g. ovn-nbctl
lrp-set-gateway-chassis lrp chassis.
ha_chassis_group: optional HA_Chassis_Group
Designates an HA_Chassis_Group to provide gateway high availability.
gateway_chassis: set of Gateway_Chassises
Designates one or more Gateway_Chassis for the logical router port.
Options for Physical VLAN MTU Issues:
MTU issues arise in mixing tunnels with logical networks that are bridged to a physical
VLAN. For an explanation of the MTU issues, see Physical VLAN MTU Issues in the OVN
architecture document. The following options, which are alternatives, provide solutions.
Both of them cause packets to be sent over localnet instead of tunnels, but they differ in
whether some or all packets are sent this way. The most prominent tradeoff between these
options is that reside-on-redirect-chassis is easier to configure and that redirect-type
performs better for east-west traffic.
options : reside-on-redirect-chassis: optional string, either true or false
If set to true, this option forces all traffic across the logical router port to
pass through the gateway chassis using a hop across a localnet port. This changes
behavior in two ways:
• Without this option, east-west traffic passes directly between source and
destination chassis (or even within a single chassis, for co-located VMs).
With this option, all east-west traffic passes through the gateway chassis.
• Without this option, traffic between the gateway chassis and other chassis
is encapsulated in tunnels. With this option, traffic passes over a localnet
interface.
This option may usefully be set only on logical router ports that connect a
distributed logical router to a logical switch with VIFs. It should not be set on a
distributed gateway port.
OVN honors this option only if the logical router has one and only one distributed
gateway port and if the LRP’s peer switch has a localnet port.
options : redirect-type: optional string, either bridged or overlay
If set to bridged on a distributed gateway port, this option causes OVN to redirect
packets to the gateway chassis over a localnet port instead of a tunnel. The
relevant chassis must share a localnet port.
This feature requires the administrator or the CMS to configure each participating
chassis with a unique Ethernet address for the logical router by setting
ovn-chassis-mac-mappings in the Open vSwitch database, for use by ovn-controller.
Setting this option to overlay or leaving it unset has no effect. This option may
usefully be set only on a distributed gateway port when there is one and only one
distributed gateway port on the logical router. It is otherwise ignored.
ipv6_prefix: set of strings
This column contains IPv6 prefix obtained by prefix delegation router according to
RFC 3633
ipv6_ra_configs:
This column defines the IPv6 ND RA address mode and ND MTU Option to be included by
ovn-controller when it replies to the IPv6 Router solicitation requests.
ipv6_ra_configs : address_mode: optional string
The address mode to be used for IPv6 address configuration. The supported values
are:
• slaac: Address configuration using Router Advertisement (RA) packet. The
IPv6 prefixes defined in the Logical_Router_Port table’s networks column
will be included in the RA’s ICMPv6 option - Prefix information.
• dhcpv6_stateful: Address configuration using DHCPv6.
• dhcpv6_stateless: Address configuration using Router Advertisement (RA)
packet. Other IPv6 options are provided by DHCPv6.
ipv6_ra_configs : router_preference: optional string
Default Router Preference (PRF) indicates whether to prefer this router over other
default routers (RFC 4191). Possible values are:
• HIGH: mapped to 0x01 in RA PRF field
• MEDIUM: mapped to 0x00 in RA PRF field
• LOW: mapped to 0x11 in RA PRF field
ipv6_ra_configs : route_info: optional string
Route Info is used to configure Route Info Option sent in Router Advertisement
according to RFC 4191. Route Info is a comma separated string where each field
provides PRF and prefix for a given route (e.g: HIGH-aef1::11/48,LOW-aef2::11/96)
Possible PRF values are:
• HIGH: mapped to 0x01 in RA PRF field
• MEDIUM: mapped to 0x00 in RA PRF field
• LOW: mapped to 0x11 in RA PRF field
ipv6_ra_configs : mtu: optional string
The recommended MTU for the link. Default is 0, which means no MTU Option will be
included in RA packet replied by ovn-controller. Per RFC 2460, the mtu value is
recommended no less than 1280, so any mtu value less than 1280 will be considered
as no MTU Option.
ipv6_ra_configs : send_periodic: optional string
If set to true, then this router interface will send router advertisements
periodically. The default is false.
ipv6_ra_configs : max_interval: optional string
The maximum number of seconds to wait between sending periodic router
advertisements. This option has no effect if ipv6_ra_configs:send_periodic is
false. The default is 600.
ipv6_ra_configs : min_interval: optional string
The minimum number of seconds to wait between sending periodic router
advertisements. This option has no effect if ipv6_ra_configs:send_periodic is
false. The default is one-third of ipv6_ra_configs:max_interval, i.e. 200 seconds
if that key is unset.
ipv6_ra_configs : rdnss: optional string
IPv6 address of RDNSS server announced in RA packets. At the moment OVN supports
just one RDNSS server.
ipv6_ra_configs : dnssl: optional string
DNS Search List announced in RA packets. Multiple DNS Search List must be ’comma’
separated (e.g. "a.b.c, d.e.f")
Options:
Additional options for the logical router port.
options : mcast_flood: optional string, either true or false
If set to true, multicast traffic (including reports) are unconditionally forwarded
to the specific port.
This option applies when the port is part of a logical router which has
options:mcast_relay set to true.
Default: false.
options : requested-tnl-key: optional string, containing an integer, in range 1 to 32,767
Configures the port binding tunnel key for the port. Usually this is not needed
because ovn-northd will assign an unique key for each port by itself. However, if
it is configured, ovn-northd honors the configured value.
options : prefix_delegation: optional string, either true or false
If set to true, enable IPv6 prefix delegation state machine on this logical router
port (RFC3633). IPv6 prefix delegation is available just on a gateway router or on
a gateway router port.
options : prefix: optional string, either true or false
If set to true, this interface will receive an IPv6 prefix according to RFC3663
options : route_table: optional string
Designates lookup Logical_Router_Static_Routes with specified route_table value.
Routes to directly connected networks from same Logical Router and routes without
route_table option set have higher priority than routes with route_table option
set.
options : gateway_mtu: optional string, containing an integer, in range 68 to 65,535
If set, logical flows will be added to router pipeline to check packet length. If
packet length is greater than the value set, ICMPv4 type 3 (Destination
Unreachable) code 4 (Fragmentation Needed and Don’t Fragment was Set) or ICMPv6
type 2 (Packet Too Big) code 0 (no route to destination) packets will be generated.
This allows for Path MTU Discovery.
options : routing-protocol-redirect: optional string
NOTE: this feature is experimental and may be subject to removal/change in the
future.
This option expects a name of a Logical Switch Port that’s present in the peer’s
Logical Switch. If set, it causes any traffic that’s destined for Logical Router
Port’s IP addresses (including its IPv6 LLA) and the ports associated with routing
protocols defined ip routing-protocols option, to be redirected to the specified
Logical Switch Port. This allows external routing daemons to be bound to a port in
OVN’s Logical Switch and act as if they were listening on Logical Router Port’s IP
addresses.
options : routing-protocols: optional string
NOTE: this feature is experimental and may be subject to removal/change in the
future.
This option expects a comma-separated list of routing, and routing-related
protocols, whose control plane traffic will be redirected to a port specified in
routing-protocol-redirect option. Currently supported options are:
• BGP (forwards TCP port 179)
• BFD (forwards UDP port 3784)
options : gateway_mtu_bypass: optional string
When configured, represents a match expression, in the same expression language
used for the match column in the OVN Southbound database’s Logical_Flow table.
Packets matching this expression will bypass the length check configured through
the options:gateway_mtu option.
options : centralize_routing: optional string, either true or false
This option is applicable only if the router port is a distributed gateway port i.e
if the ha_chassis_group column or gateway_chassis is set.
If set to true, routing for the router port’s networks (set in the column networks)
is centralized on the gateway chassis which claims this distributed gateway port.
Additionally for this option to take effect, below conditions must be met:
• The Logical router has only one distributed gateway port.
• The router port’s peer logical switch has no localnet ports.
Attachment:
A given router port serves one of two purposes:
• To attach a logical switch to a logical router. A logical router port of
this type is referenced by exactly one Logical_Switch_Port of type router.
The value of name is set as router-port in column options of
Logical_Switch_Port. In this case peer column is empty.
• To connect one logical router to another. This requires a pair of logical
router ports, each connected to a different router. Each router port in the
pair specifies the other in its peer column. No Logical_Switch refers to the
router port.
peer: optional string
For a router port used to connect two logical routers, this identifies the other
router port in the pair by name.
For a router port attached to a logical switch, this column is empty.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
The ovn-northd program copies all these pairs into the external_ids column of the
Port_Binding table in OVN_Southbound database.
Status:
Additional status about the logical router port.
status : hosting-chassis: optional string
This option is populated by ovn-northd.
When a distributed gateway port is bound to a location in the OVN Southbound
database Port_Binding ovn-northd will populate this key with the name of the
Chassis that is currently hosting this port.
Logical_Router_Static_Route TABLE
Each record represents a static route.
When multiple routes match a packet, the longest-prefix match is chosen. For a given
prefix length, a dst-ip route is preferred over a src-ip route.
When there are ECMP routes, i.e. multiple routes with same prefix and policy, one of them
will be selected based on the 5-tuple hashing of the packet header.
Summary:
ip_prefix string
policy optional string, either dst-ip or src-ip
nexthop string
output_port optional string
bfd optional weak reference to BFD
route_table string
external_ids : ic-learned-route
optional string
Common Columns:
external_ids map of string-string pairs
Common options:
options map of string-string pairs
options : ecmp_symmetric_reply
optional string
options : origin optional string
Details:
ip_prefix: string
IP prefix of this route (e.g. 192.168.100.0/24).
policy: optional string, either dst-ip or src-ip
If it is specified, this setting describes the policy used to make routing
decisions. This setting must be one of the following strings:
• src-ip: This policy sends the packet to the nexthop when the packet’s source
IP address matches ip_prefix.
• dst-ip: This policy sends the packet to the nexthop when the packet’s
destination IP address matches ip_prefix.
If not specified, the default is dst-ip.
nexthop: string
Nexthop IP address for this route. Nexthop IP address should be the IP address of a
connected router port or the IP address of a logical port or can be set to discard
for dropping packets which match the given route.
output_port: optional string
The name of the Logical_Router_Port via which the packet needs to be sent out. This
is optional and when not specified, OVN will automatically figure this out based on
the nexthop. When this is specified and there are multiple IP addresses on the
router port and none of them are in the same subnet of nexthop, OVN chooses the
first IP address as the one via which the nexthop is reachable.
bfd: optional weak reference to BFD
Reference to BFD row if the route has associated a BFD session
route_table: string
Any string to place route to separate routing table. If Logical Router Port has
configured value in options:route_table other than empty string, OVN performs route
lookup for all packets entering Logical Router ingress pipeline from this port in
the following manner:
• 1. First lookup among "global" routes: routes without route_table value set
and routes to directly connected networks.
• 2. Next lookup among routes with same route_table value as specified in
LRP’s options:route_table field.
external_ids : ic-learned-route: optional string
ovn-ic populates this key if the route is learned from the global OVN_IC_Southbound
database. In this case the value will be set to the uuid of the row in Route table
of the OVN_IC_Southbound database.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Common options:
options: map of string-string pairs
This column provides general key/value settings. The supported options are
described individually below.
options : ecmp_symmetric_reply: optional string
If true, then
• New ingress-originated traffic that arrives over this route will have its
reply traffic bypass ECMP route selection and will be sent out this route
instead.
• For the egress-originated traffic, the ingress reply traffic route gets
saved. And the subsequent traffic will bypass ECMP route selection and
instead be sent out the same route.
Note that this option overrides any rules set in the Logical_Router_policy table.
This option only works on gateway routers (routers that have options:chassis set).
options : origin: optional string
In case ovn-interconnection has been learned this route, it will have its origin
set: either "connected" or "static". This key is supposed to be written only by
ovn-ic daemon. ovn-northd then checks this value when generating Logical Flows.
Logical_Router_Static_Route records with same ip_prefix within same Logical Router
will have next lookup order based on origin key value:
1. connected
2. static
Logical_Router_Policy TABLE
Each row in this table represents one routing policy for a logical router that points to
it through its policies column. The action column for the highest-priority matching row in
this table determines a packet’s treatment. If no row matches, packets are allowed by
default. (Default-deny treatment is possible: add a rule with priority 0, 1 as match, and
drop as action.)
Summary:
priority integer, in range 0 to 32,767
match string
action string, one of allow, drop, or reroute
nexthop optional string
nexthops set of strings
bfd_sessions set of weak reference to BFDs
options : pkt_mark optional string
Common Columns:
external_ids map of string-string pairs
Details:
priority: integer, in range 0 to 32,767
The routing policy’s priority. Rules with numerically higher priority take
precedence over those with lower. A rule is uniquely identified by the priority and
match string.
match: string
The packets that the routing policy should match, in the same expression language
used for the match column in the OVN Southbound database’s Logical_Flow table.
By default all traffic is allowed. When writing a more restrictive policy, it is
important to remember to allow flows such as ARP and IPv6 neighbor discovery
packets.
action: string, one of allow, drop, or reroute
The action to take when the routing policy matches:
• allow: Forward the packet.
• drop: Silently drop the packet.
• reroute: Reroute packet to nexthop or nexthops.
nexthop: optional string
Note: This column is deprecated in favor of nexthops.
Next-hop IP address for this route, which should be the IP address of a connected
router port or the IP address of a logical port.
nexthops: set of strings
Next-hop ECMP IP addresses for this route. Each IP in the list should be the IP
address of a connected router port or the IP address of a logical port.
One IP from the list is selected as next hop.
bfd_sessions: set of weak reference to BFDs
Reference to BFD row if the route policy has associated some BFD sessions.
options : pkt_mark: optional string
Marks the packet with the value specified when the router policy is applied. CMS
can inspect this packet marker and take some decisions if desired. This value is
not preserved when the packet goes out on the wire.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
NAT TABLE
Each record represents a NAT rule.
Summary:
type string, one of dnat, dnat_and_snat, or snat
external_ip string
external_mac optional string
external_port_range string
logical_ip string
logical_port optional string
allowed_ext_ips optional Address_Set
exempted_ext_ips optional Address_Set
gateway_port optional weak reference to Logical_Router_Port
match string
priority integer, in range 0 to 32,767
options : stateless optional string
options : add_route optional string
Common Columns:
external_ids map of string-string pairs
Details:
type: string, one of dnat, dnat_and_snat, or snat
Type of the NAT rule.
• When type is dnat, the externally visible IP address external_ip is DNATted
to the IP address logical_ip in the logical space.
• When type is snat, IP packets with their source IP address that either
matches the IP address in logical_ip or is in the network provided by
logical_ip is SNATed into the IP address in external_ip.
• When type is dnat_and_snat, the externally visible IP address external_ip is
DNATted to the IP address logical_ip in the logical space. In addition, IP
packets with the source IP address that matches logical_ip is SNATed into
the IP address in external_ip.
external_ip: string
An IPv4 address.
external_mac: optional string
A MAC address.
This is only used on the gateway port on distributed routers. This must be
specified in order for the NAT rule to be processed in a distributed manner on all
chassis. If this is not specified for a NAT rule on a distributed router, then this
NAT rule will be processed in a centralized manner on the gateway port instance on
the gateway chassis.
This MAC address must be unique on the logical switch that the gateway port is
attached to. If the MAC address used on the logical_port is globally unique, then
that MAC address can be specified as this external_mac.
external_port_range: string
L4 source port range
Range of ports, from which a port number will be picked that will replace the
source port of to be NATed packet. This is basically PAT (port address
translation).
Value of the column is in the format, port_lo-port_hi. For example:
external_port_range : "1-30000"
Valid range of ports is 1-65535.
logical_ip: string
An IPv4 network (e.g 192.168.1.0/24) or an IPv4 address.
logical_port: optional string
The name of the logical port where the logical_ip resides.
This is only used on distributed routers. This must be specified in order for the
NAT rule to be processed in a distributed manner on all chassis. If this is not
specified for a NAT rule on a distributed router, then this NAT rule will be
processed in a centralized manner on the gateway port instance on the gateway
chassis.
allowed_ext_ips: optional Address_Set
It represents Address Set of external ips that NAT rule is applicable to. For SNAT
type NAT rules, this refers to destination addresses. For DNAT type NAT rules, this
refers to source addresses.
This configuration overrides the default NAT behavior of applying a rule solely
based on internal IP. Without this configuration, NAT happens without considering
the external IP (i.e dest/source for snat/dnat type rule). With this configuration
NAT rule is applied ONLY if external ip is in the input Address Set.
exempted_ext_ips: optional Address_Set
It represents Address Set of external ips that NAT rule is NOT applicable to. For
SNAT type NAT rules, this refers to destination addresses. For DNAT type NAT rules,
this refers to source addresses.
This configuration overrides the default NAT behavior of applying a rule solely
based on internal IP. Without this configuration, NAT happens without considering
the external IP (i.e dest/source for snat/dnat type rule). With this configuration
NAT rule is NOT applied if external ip is in the input Address Set.
If there are NAT rules in a logical router with overlapping IP prefixes (including
/32), then usage of exempted_ext_ips should be avoided in following scenario. a.
SNAT rule (let us say RULE1) with logical_ip PREFIX/MASK (let us say 50.0.0.0/24).
b. SNAT rule (let us say RULE2) with logical_ip PREFIX/MASK+1 (let us say
50.0.0.0/25). c. Now, if exempted_ext_ips is associated with RULE2, then a logical
ip which matches both 50.0.0.0/24 and 50.0.0.0/25 may get the RULE2 applied to it
instead of RULE1.
allowed_ext_ips and exempted_ext_ips are mutually exclusive to each other. If both
Address Sets are set for a rule, then the NAT rule is not considered.
gateway_port: optional weak reference to Logical_Router_Port
A distributed gateway port in the Logical_Router_Port table where the NAT rule
needs to be applied.
When multiple distributed gateway ports are configured on a Logical_Router,
applying a NAT rule at each of the distributed gateway ports might not be desired.
Consider the case where a logical router has 2 distributed gateway port, one with
networks 50.0.0.10/24 and the other with networks 60.0.0.10/24. If the logical
router has a NAT rule of type snat, logical_ip 10.1.1.0/24 and external_ip
50.1.1.20/24, the rule needs to be selectively applied on matching packets
entering/leaving through the distributed gateway port with networks 50.0.0.10/24.
When a logical router has multiple distributed gateway ports and this column is not
set for a NAT rule, then the rule will be applied at the distributed gateway port
which is in the same network as the external_ip of the NAT rule, if such a router
port exists. If logical router has a single distributed gateway port and this
column is not set for a NAT rule, the rule will be applied at the distributed
gateway port even if the router port is not in the same network as the external_ip
of the NAT rule.
match: string
The packets that the NAT rules should match, in addition to the match that is
created based on the NAT type, in the same expression language used for the match
column in the OVN Southbound database’s Logical_Flow table. This allows for more
fine-grained control over the NAT rule.
priority: integer, in range 0 to 32,767
The NAT rule’s priority. Rules with numerically higher priority take precedence
over those with lower. The priority is taken into account only if the match is
defined.
options : stateless: optional string
Indicates if a dnat_and_snat rule should lead to connection tracking state or not.
options : add_route: optional string
If set to true, then neighbor routers will have logical flows added that will allow
for routing to the NAT address. It also will have ARP resolution logical flows
added. By setting this option, it means there is no reason to create a
Logical_Router_Static_Route from neighbor routers to this NAT address. It also
means that no ARP request is required for neighbor routers to learn the IP-MAC
mapping for this NAT address. This option only applies to NATs of type dnat and
dnat_and_snat. For more information about what flows are added for IP routes,
please see the ovn-northd manpage section on IP Routing.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
DHCP_Options TABLE
OVN implements native DHCPv4 support which caters to the common use case of providing an
IPv4 address to a booting instance by providing stateless replies to DHCPv4 requests based
on statically configured address mappings. To do this it allows a short list of DHCPv4
options to be configured and applied at each compute host running ovn-controller.
OVN also implements native DHCPv6 support which provides stateless replies to DHCPv6
requests.
Summary:
cidr string
DHCPv4 options:
Mandatory DHCPv4 options:
options : server_id optional string
options : server_mac optional string
options : lease_time optional string, containing an integer, in range 0 to
4,294,967,295
IPv4 DHCP Options:
options : router optional string
options : netmask optional string
options : dns_server optional string
options : log_server optional string
options : lpr_server optional string
options : swap_server optional string
options : policy_filter optional string
options : router_solicitation
optional string
options : nis_server optional string
options : ntp_server optional string
options : netbios_name_server
optional string
options : classless_static_route
optional string
options : ms_classless_static_route
optional string
options : next_server optional string
Boolean DHCP Options:
options : ip_forward_enable
optional string, either 0 or 1
options : router_discovery
optional string, either 0 or 1
options : ethernet_encap optional string, either 0 or 1
Integer DHCP Options:
options : default_ttl optional string, containing an integer, in range 0 to 255
options : tcp_ttl optional string, containing an integer, in range 0 to 255
options : mtu optional string, containing an integer, in range 68 to
65,535
options : T1 optional string, containing an integer, in range 68 to
4,294,967,295
options : T2 optional string, containing an integer, in range 68 to
4,294,967,295
options : arp_cache_timeout
optional string, containing an integer, in range 0 to 255
options : tcp_keepalive_interval
optional string, containing an integer, in range 0 to 255
options : netbios_node_type
optional string, containing an integer, in range 0 to 255
String DHCP Options:
options : wpad optional string
options : bootfile_name optional string
options : path_prefix optional string
options : tftp_server_address
optional string
options : hostname optional string
options : domain_name optional string
options : bootfile_name_alt
optional string
options : broadcast_address
optional string
DHCP Options of type host_id:
options : tftp_server optional string
DHCP Options of type domains:
options : domain_search_list
optional string
DHCPv6 options:
Mandatory DHCPv6 options:
options : server_id optional string
IPv6 DHCPv6 options:
options : dns_server optional string
String DHCPv6 options:
options : domain_search optional string
options : dhcpv6_stateless
optional string
options : fqdn optional string
Common Columns:
external_ids map of string-string pairs
Details:
cidr: string
The DHCPv4/DHCPv6 options will be included if the logical port has its IP address
in this cidr.
DHCPv4 options:
The CMS should define the set of DHCPv4 options as key/value pairs in the options column
of this table. For ovn-controller to include these DHCPv4 options, the dhcpv4_options of
Logical_Switch_Port should refer to an entry in this table.
Mandatory DHCPv4 options:
The following options must be defined.
options : server_id: optional string
The IP address for the DHCP server to use. This should be in the subnet of the
offered IP. This is also included in the DHCP offer as option 54, ``server
identifier.’’
options : server_mac: optional string
The Ethernet address for the DHCP server to use.
options : lease_time: optional string, containing an integer, in range 0 to 4,294,967,295
The offered lease time in seconds,
The DHCPv4 option code for this option is 51.
IPv4 DHCP Options:
Below are the supported DHCPv4 options whose values are an IPv4 address, e.g. 192.168.1.1.
Some options accept multiple IPv4 addresses enclosed within curly braces, e.g.
{192.168.1.2, 192.168.1.3}. Please refer to RFC 2132 for more details on DHCPv4 options
and their codes.
options : router: optional string
The IP address of a gateway for the client to use. This should be in the subnet of
the offered IP. The DHCPv4 option code for this option is 3.
options : netmask: optional string
The DHCPv4 option code for this option is 1.
options : dns_server: optional string
The DHCPv4 option code for this option is 6.
options : log_server: optional string
The DHCPv4 option code for this option is 7.
options : lpr_server: optional string
The DHCPv4 option code for this option is 9.
options : swap_server: optional string
The DHCPv4 option code for this option is 16.
options : policy_filter: optional string
The DHCPv4 option code for this option is 21.
options : router_solicitation: optional string
The DHCPv4 option code for this option is 32.
options : nis_server: optional string
The DHCPv4 option code for this option is 41.
options : ntp_server: optional string
The DHCPv4 option code for this option is 42.
options : netbios_name_server: optional string
The DHCPv4 option code for this option is 44.
options : classless_static_route: optional string
The DHCPv4 option code for this option is 121.
This option can contain one or more static routes, each of which consists of a
destination descriptor and the IP address of the router that should be used to
reach that destination. Please see RFC 3442 for more details.
Example: {30.0.0.0/24,10.0.0.10, 0.0.0.0/0,10.0.0.1}
options : ms_classless_static_route: optional string
The DHCPv4 option code for this option is 249. This option is similar to
classless_static_route supported by Microsoft Windows DHCPv4 clients.
options : next_server: optional string
The DHCPv4 option code for setting the "Next server IP address" field in the DHCP
header.
Boolean DHCP Options:
These options accept a Boolean value, expressed as 0 for false or 1 for true.
options : ip_forward_enable: optional string, either 0 or 1
The DHCPv4 option code for this option is 19.
options : router_discovery: optional string, either 0 or 1
The DHCPv4 option code for this option is 31.
options : ethernet_encap: optional string, either 0 or 1
The DHCPv4 option code for this option is 36.
Integer DHCP Options:
These options accept a nonnegative integer value.
options : default_ttl: optional string, containing an integer, in range 0 to 255
The DHCPv4 option code for this option is 23.
options : tcp_ttl: optional string, containing an integer, in range 0 to 255
The DHCPv4 option code for this option is 37.
options : mtu: optional string, containing an integer, in range 68 to 65,535
The DHCPv4 option code for this option is 26.
options : T1: optional string, containing an integer, in range 68 to 4,294,967,295
This specifies the time interval from address assignment until the client begins
trying to renew its address. The DHCPv4 option code for this option is 58.
options : T2: optional string, containing an integer, in range 68 to 4,294,967,295
This specifies the time interval from address assignment until the client begins
trying to rebind its address. The DHCPv4 option code for this option is 59.
options : arp_cache_timeout: optional string, containing an integer, in range 0 to 255
The DHCPv4 option code for this option is 35. This option specifies the timeout in
seconds for ARP cache entries.
options : tcp_keepalive_interval: optional string, containing an integer, in range 0 to
255
The DHCPv4 option code for this option is 38. This option specifies the interval
that the client TCP should wait before sending a keepalive message on a TCP
connection.
options : netbios_node_type: optional string, containing an integer, in range 0 to 255
The DHCPv4 option code for this option is 46.
String DHCP Options:
These options accept a string value.
options : wpad: optional string
The DHCPv4 option code for this option is 252. This option is used as part of web
proxy auto discovery to provide a URL for a web proxy.
options : bootfile_name: optional string
The DHCPv4 option code for this option is 67. This option is used to identify a
bootfile.
options : path_prefix: optional string
The DHCPv4 option code for this option is 210. In PXELINUX’ case this option is
used to set a common path prefix, instead of deriving it from the bootfile name.
options : tftp_server_address: optional string
The DHCPv4 option code for this option is 150. The option contains one or more IPv4
addresses that the client MAY use. This option is Cisco proprietary, the IEEE
standard that matches with this requirement is option 66 (tftp_server).
options : hostname: optional string
The DHCPv4 option code for this option is 12. If set, indicates the DHCPv4 option
"Hostname". Alternatively, this option can be configured in options:hostname column
in table Logical_Switch_Port. If Hostname option value is set in both conflicting
Logical_Switch_Port and DHCP_Options tables, Logical_Switch_Port takes precedence.
options : domain_name: optional string
The DHCPv4 option code for this option is 15. This option specifies the domain name
that client should use when resolving hostnames via the Domain Name System.
options : bootfile_name_alt: optional string
"bootfile_name_alt" option is used to support iPXE. When both "bootfile_name" and
"bootfile_name_alt" are provided by the CMS, "bootfile_name" will be used for
option 67 if the dhcp request contains etherboot option (175), otherwise
"bootfile_name_alt" will be used.
options : broadcast_address: optional string
The DHCPv4 option code for this option is 28. This option specifies the IP address
used as a broadcast address.
DHCP Options of type host_id:
These options accept either an IPv4 address or a string value.
options : tftp_server: optional string
The DHCPv4 option code for this option is 66.
DHCP Options of type domains:
These options accept string value which is a comma separated list of domain names. The
domain names are encoded based on RFC 1035.
options : domain_search_list: optional string
The DHCPv4 option code for this option is 119.
DHCPv6 options:
OVN also implements native DHCPv6 support. The CMS should define the set of DHCPv6 options
as key/value pairs. The define DHCPv6 options will be included in the DHCPv6 response to
the DHCPv6 Solicit/Request/Confirm packet from the logical ports having the IPv6 addresses
in the cidr.
Mandatory DHCPv6 options:
The following options must be defined.
options : server_id: optional string
The Ethernet address for the DHCP server to use. This is also included in the
DHCPv6 reply as option 2, ``Server Identifier’’ to carry a DUID identifying a
server between a client and a server. ovn-controller defines DUID based on Link-
layer Address [DUID-LL].
IPv6 DHCPv6 options:
Below are the supported DHCPv6 options whose values are an IPv6 address, e.g. aef0::4.
Some options accept multiple IPv6 addresses enclosed within curly braces, e.g. {aef0::4,
aef0::5}. Please refer to RFC 3315 for more details on DHCPv6 options and their codes.
options : dns_server: optional string
The DHCPv6 option code for this option is 23. This option specifies the DNS servers
that the VM should use.
String DHCPv6 options:
These options accept string values.
options : domain_search: optional string
The DHCPv6 option code for this option is 24. This option specifies the domain
search list the client should use to resolve hostnames with DNS.
Example: "ovn.org".
options : dhcpv6_stateless: optional string
This option specifies the OVN native DHCPv6 will work in stateless mode, which
means OVN native DHCPv6 will not offer IPv6 addresses for VM/VIF ports, but only
reply other configurations, such as DNS and domain search list. When setting this
option with string value "true", VM/VIF will configure IPv6 addresses by stateless
way. Default value for this option is false.
options : fqdn: optional string
The DHCPv6 option code for this option is 39. If set, indicates the DHCPv6 option
"FQDN".
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
DHCP_Relay TABLE
OVN implements native DHCPv4 relay support which caters to the common use case of relaying
the DHCP requests to external DHCP server.
Summary:
name string
servers optional string
options map of string-string pairs
Common Columns:
external_ids map of string-string pairs
Details:
name: string
A name for the DHCP Relay.
servers: optional string
The DHCPv4 server IP address.
options: map of string-string pairs
Future purpose.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Connection TABLE
Configuration for a database connection to an Open vSwitch database (OVSDB) client.
This table primarily configures the Open vSwitch database server (ovsdb-server).
The Open vSwitch database server can initiate and maintain active connections to remote
clients. It can also listen for database connections.
Summary:
Core Features:
target string (must be unique within table)
Client Failure Detection and Handling:
max_backoff optional integer, at least 1,000
inactivity_probe optional integer
Status:
is_connected boolean
status : last_error optional string
status : state optional string, one of ACTIVE, BACKOFF, CONNECTING, IDLE,
or VOID
status : sec_since_connect optional string, containing an integer, at least 0
status : sec_since_disconnect
optional string, containing an integer, at least 0
status : locks_held optional string
status : locks_waiting optional string
status : locks_lost optional string
status : n_connections optional string, containing an integer, at least 2
status : bound_port optional string, containing an integer
Common Columns:
external_ids map of string-string pairs
other_config map of string-string pairs
Details:
Core Features:
target: string (must be unique within table)
Connection methods for clients.
The following connection methods are currently supported:
ssl:host[:port]
The specified SSL port on the host at the given host, which can either be a
DNS name (if built with unbound library) or an IP address. A valid SSL
configuration must be provided when this form is used, this configuration
can be specified via command-line options or the SSL table.
If port is not specified, it defaults to 6640.
SSL support is an optional feature that is not always built as part of Open
vSwitch.
tcp:host[:port]
The specified TCP port on the host at the given host, which can either be a
DNS name (if built with unbound library) or an IP address. If host is an
IPv6 address, wrap it in square brackets, e.g. tcp:[::1]:6640.
If port is not specified, it defaults to 6640.
pssl:[port][:host]
Listens for SSL connections on the specified TCP port. Specify 0 for port to
have the kernel automatically choose an available port. If host, which can
either be a DNS name (if built with unbound library) or an IP address, is
specified, then connections are restricted to the resolved or specified
local IPaddress (either IPv4 or IPv6 address). If host is an IPv6 address,
wrap in square brackets, e.g. pssl:6640:[::1]. If host is not specified then
it listens only on IPv4 (but not IPv6) addresses. A valid SSL configuration
must be provided when this form is used, this can be specified either via
command-line options or the SSL table.
If port is not specified, it defaults to 6640.
SSL support is an optional feature that is not always built as part of Open
vSwitch.
ptcp:[port][:host]
Listens for connections on the specified TCP port. Specify 0 for port to
have the kernel automatically choose an available port. If host, which can
either be a DNS name (if built with unbound library) or an IP address, is
specified, then connections are restricted to the resolved or specified
local IP address (either IPv4 or IPv6 address). If host is an IPv6 address,
wrap it in square brackets, e.g. ptcp:6640:[::1]. If host is not specified
then it listens only on IPv4 addresses.
If port is not specified, it defaults to 6640.
When multiple clients are configured, the target values must be unique. Duplicate
target values yield unspecified results.
Client Failure Detection and Handling:
max_backoff: optional integer, at least 1,000
Maximum number of milliseconds to wait between connection attempts. Default is
implementation-specific.
inactivity_probe: optional integer
Maximum number of milliseconds of idle time on connection to the client before
sending an inactivity probe message. If Open vSwitch does not communicate with the
client for the specified number of seconds, it will send a probe. If a response is
not received for the same additional amount of time, Open vSwitch assumes the
connection has been broken and attempts to reconnect. Default is implementation-
specific. A value of 0 disables inactivity probes.
Status:
Key-value pair of is_connected is always updated. Other key-value pairs in the status
columns may be updated depends on the target type.
When target specifies a connection method that listens for inbound connections (e.g. ptcp:
or punix:), both n_connections and is_connected may also be updated while the remaining
key-value pairs are omitted.
On the other hand, when target specifies an outbound connection, all key-value pairs may
be updated, except the above-mentioned two key-value pairs associated with inbound
connection targets. They are omitted.
is_connected: boolean
true if currently connected to this client, false otherwise.
status : last_error: optional string
A human-readable description of the last error on the connection to the manager;
i.e. strerror(errno). This key will exist only if an error has occurred.
status : state: optional string, one of ACTIVE, BACKOFF, CONNECTING, IDLE, or VOID
The state of the connection to the manager:
VOID Connection is disabled.
BACKOFF
Attempting to reconnect at an increasing period.
CONNECTING
Attempting to connect.
ACTIVE Connected, remote host responsive.
IDLE Connection is idle. Waiting for response to keep-alive.
These values may change in the future. They are provided only for human
consumption.
status : sec_since_connect: optional string, containing an integer, at least 0
The amount of time since this client last successfully connected to the database
(in seconds). Value is empty if client has never successfully been connected.
status : sec_since_disconnect: optional string, containing an integer, at least 0
The amount of time since this client last disconnected from the database (in
seconds). Value is empty if client has never disconnected.
status : locks_held: optional string
Space-separated list of the names of OVSDB locks that the connection holds. Omitted
if the connection does not hold any locks.
status : locks_waiting: optional string
Space-separated list of the names of OVSDB locks that the connection is currently
waiting to acquire. Omitted if the connection is not waiting for any locks.
status : locks_lost: optional string
Space-separated list of the names of OVSDB locks that the connection has had stolen
by another OVSDB client. Omitted if no locks have been stolen from this connection.
status : n_connections: optional string, containing an integer, at least 2
When target specifies a connection method that listens for inbound connections
(e.g. ptcp: or pssl:) and more than one connection is actually active, the value is
the number of active connections. Otherwise, this key-value pair is omitted.
status : bound_port: optional string, containing an integer
When target is ptcp: or pssl:, this is the TCP port on which the OVSDB server is
listening. (This is particularly useful when target specifies a port of 0, allowing
the kernel to choose any available port.)
Common Columns:
The overall purpose of these columns is described under Common Columns at the beginning of
this document.
external_ids: map of string-string pairs
other_config: map of string-string pairs
DNS TABLE
Each row in this table stores the DNS records. The Logical_Switch table’s dns_records
references these records.
Summary:
records map of string-string pairs
options : ovn-owned optional string
external_ids map of string-string pairs
Details:
records: map of string-string pairs
Key-value pair of DNS records with DNS query name as the key and value as a string
of IP address(es) separated by comma or space. For PTR requests, the key-value pair
can be Reverse IPv4 address.in-addr.arpa and the value DNS domain name. For IPv6
addresses, the key has to be Reverse IPv6 address.ip6.arpa.
Example: "vm1.ovn.org" = "10.0.0.4 aef0::4"
Example: "4.0.0.10.in-addr.arpa" = "vm1.ovn.org"
options : ovn-owned: optional string
If set to true, then the OVN will be the main responsible for DNS Records within
this row.
A DNS row with this option set to true can be created for domains that the user
needs to configure locally and don’t care about IPv6 only interested in IPv4 or
vice versa. This will let ovn send IPv4 DNS reply and reject/ignore IPv6 queries to
save the waiting for a timeout on those uninteresting queries.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
SSL TABLE
SSL configuration for ovn-nb database access.
Summary:
private_key string
certificate string
ca_cert string
bootstrap_ca_cert boolean
ssl_protocols string
ssl_ciphers string
Common Columns:
external_ids map of string-string pairs
Details:
private_key: string
Name of a PEM file containing the private key used as the switch’s identity for SSL
connections to the controller.
certificate: string
Name of a PEM file containing a certificate, signed by the certificate authority
(CA) used by the controller and manager, that certifies the switch’s private key,
identifying a trustworthy switch.
ca_cert: string
Name of a PEM file containing the CA certificate used to verify that the switch is
connected to a trustworthy controller.
bootstrap_ca_cert: boolean
If set to true, then Open vSwitch will attempt to obtain the CA certificate from
the controller on its first SSL connection and save it to the named PEM file. If it
is successful, it will immediately drop the connection and reconnect, and from then
on all SSL connections must be authenticated by a certificate signed by the CA
certificate thus obtained. This option exposes the SSL connection to a
man-in-the-middle attack obtaining the initial CA certificate. It may still be
useful for bootstrapping.
ssl_protocols: string
List of SSL protocols to be enabled for SSL connections. The default when this
option is omitted is TLSv1,TLSv1.1,TLSv1.2.
ssl_ciphers: string
List of ciphers (in OpenSSL cipher string format) to be supported for SSL
connections. The default when this option is omitted is HIGH:!aNULL:!MD5.
Common Columns:
The overall purpose of these columns is described under Common Columns at the beginning of
this document.
external_ids: map of string-string pairs
Gateway_Chassis TABLE
Association of a chassis to a logical router port. The traffic going out through an
specific router port will be redirected to a chassis, or a set of them in high
availability configurations.
Summary:
name string (must be unique within table)
chassis_name string
priority integer, in range 0 to 32,767
options map of string-string pairs
Common Columns:
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
Name of the Gateway_Chassis.
A suggested, but not required naming convention is ${port_name}_${chassis_name}.
chassis_name: string
Name of the chassis that we want to redirect traffic through for the associated
logical router port. The value must match the name column of the Chassis table in
the OVN_Southbound database.
priority: integer, in range 0 to 32,767
This is the priority of a chassis among all Gateway_Chassis belonging to the same
logical router port.
options: map of string-string pairs
Reserved for future use.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
HA_Chassis_Group TABLE
Table representing a group of chassis which can provide high availability services. Each
chassis in the group is represented by the table HA_Chassis. The HA chassis with highest
priority will be the active chassis of this group. If the active chassis failover is
detected, the HA chassis with the next higher priority takes over the responsibility of
providing the HA. If a distributed gateway router port references a row in this table,
then the active HA chassis in this group provides the gateway functionality.
Summary:
name string (must be unique within table)
ha_chassis set of HA_Chassises
Common Columns:
external_ids map of string-string pairs
Details:
name: string (must be unique within table)
Name of the HA_Chassis_Group. Name should be unique.
ha_chassis: set of HA_Chassises
A list of HA chassis which belongs to this group.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
HA_Chassis TABLE
Summary:
chassis_name string
priority integer, in range 0 to 32,767
Common Columns:
external_ids map of string-string pairs
Details:
chassis_name: string
Name of the chassis which is part of the HA chassis group. The value must match the
name column of the Chassis table in the OVN_Southbound database.
priority: integer, in range 0 to 32,767
Priority of the chassis. Chassis with highest priority will be the active chassis.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
BFD TABLE
Contains BFD parameter for ovn-controller BFD configuration. OVN BFD implementation is
used to provide detection of failures in the path between adjacent forwarding engines,
including the OVN interfaces. OVN BFD provides link status info to OVN northd in order to
update logical flows according to the status of BFD endpoints. In the current
implementation OVN BFD is used to check next-hop status for ECMP routes. Please note BFD
table refers to OVN BFD implementation and not to OVS legacy one.
Summary:
Configuration:
logical_port string
dst_ip string
min_tx optional integer, at least 1
min_rx optional integer
detect_mult optional integer, at least 1
options map of string-string pairs
external_ids map of string-string pairs
Status Reporting:
status optional string, one of admin_down, down, init, or up
Details:
Configuration:
ovn-northd reads configuration from these columns.
logical_port: string
OVN logical port when BFD engine is running.
dst_ip: string
BFD peer IP address.
min_tx: optional integer, at least 1
This is the minimum interval, in milliseconds, that the local system would like to
use when transmitting BFD Control packets, less any jitter applied. The value zero
is reserved. Default value is 1000 ms.
min_rx: optional integer
This is the minimum interval, in milliseconds, between received BFD Control packets
that this system is capable of supporting, less any jitter applied by the sender.
If this value is zero, the transmitting system does not want the remote system to
send any periodic BFD Control packets.
detect_mult: optional integer, at least 1
Detection time multiplier. The negotiated transmit interval, multiplied by this
value, provides the Detection Time for the receiving system in Asynchronous mode.
Default value is 5.
options: map of string-string pairs
Reserved for future use.
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Status Reporting:
ovn-northd writes BFD status into these columns.
status: optional string, one of admin_down, down, init, or up
BFD port logical states. Possible values are:
• admin_down
• down
• init
• up
Static_MAC_Binding TABLE
Each record represents a Static_MAC_Binding entry for a logical router.
Summary:
Configuration:
logical_port string
ip string
mac string
override_dynamic_mac boolean
Details:
Configuration:
ovn-northd reads configuration from these columns and propagates the value to SBDB.
logical_port: string
The logical router port for the binding.
ip: string
The bound IP address.
mac: string
The Ethernet address to which the IP is bound.
override_dynamic_mac: boolean
Override dynamically learnt MACs.
Chassis_Template_Var TABLE
One record per chassis, each containing a map, variables, between template variable names
and their value for that specific chassis. A template variable has a name and potentially
different values on different hypervisors in the OVN cluster. For example, two rows, R1 =
(.chassis=C1, variables={(N: V1)} and R2 = (.chassis=C2, variables={(N: V2)} will make
ovn-controller running on chassis C1 and C2 interpret the token N either as V1 (on C1) or
as V2 (on C2). Users can refer to template variables from within other logical components,
e.g., within ACL, QoS or Logical_Router_Policy matches or from Load_Balancer VIP and
backend definitions.
If a template variable is referenced on a chassis for which that variable is not defined
then ovn-controller running on that chassis will just interpret it as a raw string
literal.
Summary:
chassis string (must be unique within table)
variables map of string-string pairs
Common Columns:
external_ids map of string-string pairs
Details:
chassis: string (must be unique within table)
The chassis this set of variable values applies to.
variables: map of string-string pairs
The set of variable values for a given chassis.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.
Sampling_App TABLE
Summary:
type string, one of acl-est, acl-new, or drop (must be unique
within table)
id integer, in range 1 to 255
Common Columns:
external_ids map of string-string pairs
Details:
type: string, one of acl-est, acl-new, or drop (must be unique within table)
The type of the application to be configured for sampling. Currently supported
options are: "drop", "acl-new", "acl-est".
id: integer, in range 1 to 255
The identifier to be encoded in the samples generated for this type of application.
This identifier is used as part of the sample’s observation domain ID.
Common Columns:
external_ids: map of string-string pairs
See External IDs at the beginning of this document.