NAME

       srec_brecord - Freescale MC68EZ328 Dragonball bootstrap record format

DESCRIPTION

       This  data  format  is  understood  by Freescale MC68EZ328 Dragonball series processors on their internal
       UART.

   Lines
       Each line contains hexadecimal data, each byte represented by two  hexadecimal  nybbles  in  upper  case.
       Characters  not in this set, but larger than 0x30 (e.g. lower case) will be ignored, less than 0x30 (e.g.
       CR or LF) are considered record terminators.  Comments are problematic; don't try this at home.

   Fields
       Each line contains a 4‐byte address (big endian), a  1‐byte  length‐and‐mode,  and  then  data  bytes  as
       dictated  by  the  length.   There  is  no  checksum.  A zero length record is an execution start address
       record, non‐zero length records are data.
                                 ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬────┬─────┬───┐
                                 │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 10 │ ... │ n │
                                 ├───┴───┴───┴───┴───┴───┴───┴───┼───┴────┼─────┴───┤
                                 │            Address            │ Length │  Data   │
                                 └───────────────────────────────┴────────┴─────────┘

       The length‐and‐mode byte is formatted as follows:
                                          ┌───┬───┬───┬───┬───┬───┬───┬───┐
                                          │ 7 │ 6 │ 5 │ 4 │ 3 │ 2 │ 1 │ 0 │
                                          ├───┴───┼───┼───┴───┴───┴───┴───┤
                                          │ Mode  │ R │      Length       │
                                          └───────┴───┴───────────────────┘

       Mode    These bits are ignored by SRecord in input (00 = bytes, 01 = half words, 10  is  reserved,  11  =
               long words).  These bits are always zero on output by SRecord.

       R       This bit indicates a data read rather than a data write; SRecord does not accept input files with
               this bit set, and will not set it on output.

       Length  The  length  of  the  records  data bytes.  It does not include the address or length bytes.  The
               maximum payload of a record is 31 bytes of data.

   Size Multiplier
       In general, binary data will expand in sized by at least 2.35 times when represented with this format.

EXAMPLE

       Here is an example b‐record format file.  It contains the data “Hello, World” to be loaded at address 0.
              000000000D48656C6C6F2C20576F726C640A

SEE ALSO

       http://www.freescale.com/files/32bit/doc/ref_manual/MC68VZ328UM.pdf

COPYRIGHT

       srec_cat version 1.64
       Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,  2011,  2012,
       2013, 2014 Peter Miller

       The  srec_cat  program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_cat -VERSion License'
       command.  This is free software and you are welcome to redistribute  it  under  certain  conditions;  for
       details use the 'srec_cat -VERSion License' command.

MAINTAINER

       Scott Finneran   E‐Mail:   scottfinneran@yahoo.com.au
       Peter Miller     E‐Mail:   pmiller@opensource.org.au

Reference Manual                                     SRecord                                     srec_brecord(5)