Provided by: postgresql-client-17_17.2-1_amd64 
NAME
CREATE_VIEW - define a new view
SYNOPSIS
CREATE [ OR REPLACE ] [ TEMP | TEMPORARY ] [ RECURSIVE ] VIEW name [ ( column_name [, ...] ) ]
[ WITH ( view_option_name [= view_option_value] [, ... ] ) ]
AS query
[ WITH [ CASCADED | LOCAL ] CHECK OPTION ]
DESCRIPTION
CREATE VIEW defines a view of a query. The view is not physically materialized. Instead,
the query is run every time the view is referenced in a query.
CREATE OR REPLACE VIEW is similar, but if a view of the same name already exists, it is
replaced. The new query must generate the same columns that were generated by the existing
view query (that is, the same column names in the same order and with the same data
types), but it may add additional columns to the end of the list. The calculations giving
rise to the output columns may be completely different.
If a schema name is given (for example, CREATE VIEW myschema.myview ...) then the view is
created in the specified schema. Otherwise it is created in the current schema. Temporary
views exist in a special schema, so a schema name cannot be given when creating a
temporary view. The name of the view must be distinct from the name of any other relation
(table, sequence, index, view, materialized view, or foreign table) in the same schema.
PARAMETERS
TEMPORARY or TEMP
If specified, the view is created as a temporary view. Temporary views are
automatically dropped at the end of the current session. Existing permanent relations
with the same name are not visible to the current session while the temporary view
exists, unless they are referenced with schema-qualified names.
If any of the tables referenced by the view are temporary, the view is created as a
temporary view (whether TEMPORARY is specified or not).
RECURSIVE
Creates a recursive view. The syntax
CREATE RECURSIVE VIEW [ schema . ] view_name (column_names) AS SELECT ...;
is equivalent to
CREATE VIEW [ schema . ] view_name AS WITH RECURSIVE view_name (column_names) AS (SELECT ...) SELECT column_names FROM view_name;
A view column name list must be specified for a recursive view.
name
The name (optionally schema-qualified) of a view to be created.
column_name
An optional list of names to be used for columns of the view. If not given, the column
names are deduced from the query.
WITH ( view_option_name [= view_option_value] [, ... ] )
This clause specifies optional parameters for a view; the following parameters are
supported:
check_option (enum)
This parameter may be either local or cascaded, and is equivalent to specifying
WITH [ CASCADED | LOCAL ] CHECK OPTION (see below).
security_barrier (boolean)
This should be used if the view is intended to provide row-level security. See
Section 39.5 for full details.
security_invoker (boolean)
This option causes the underlying base relations to be checked against the
privileges of the user of the view rather than the view owner. See the notes below
for full details.
All of the above options can be changed on existing views using ALTER VIEW.
query
A SELECT or VALUES command which will provide the columns and rows of the view.
WITH [ CASCADED | LOCAL ] CHECK OPTION
This option controls the behavior of automatically updatable views. When this option
is specified, INSERT, UPDATE, and MERGE commands on the view will be checked to ensure
that new rows satisfy the view-defining condition (that is, the new rows are checked
to ensure that they are visible through the view). If they are not, the update will be
rejected. If the CHECK OPTION is not specified, INSERT, UPDATE, and MERGE commands on
the view are allowed to create rows that are not visible through the view. The
following check options are supported:
LOCAL
New rows are only checked against the conditions defined directly in the view
itself. Any conditions defined on underlying base views are not checked (unless
they also specify the CHECK OPTION).
CASCADED
New rows are checked against the conditions of the view and all underlying base
views. If the CHECK OPTION is specified, and neither LOCAL nor CASCADED is
specified, then CASCADED is assumed.
The CHECK OPTION may not be used with RECURSIVE views.
Note that the CHECK OPTION is only supported on views that are automatically
updatable, and do not have INSTEAD OF triggers or INSTEAD rules. If an automatically
updatable view is defined on top of a base view that has INSTEAD OF triggers, then the
LOCAL CHECK OPTION may be used to check the conditions on the automatically updatable
view, but the conditions on the base view with INSTEAD OF triggers will not be checked
(a cascaded check option will not cascade down to a trigger-updatable view, and any
check options defined directly on a trigger-updatable view will be ignored). If the
view or any of its base relations has an INSTEAD rule that causes the INSERT or UPDATE
command to be rewritten, then all check options will be ignored in the rewritten
query, including any checks from automatically updatable views defined on top of the
relation with the INSTEAD rule. MERGE is not supported if the view or any of its base
relations have rules.
NOTES
Use the DROP VIEW statement to drop views.
Be careful that the names and types of the view's columns will be assigned the way you
want. For example:
CREATE VIEW vista AS SELECT 'Hello World';
is bad form because the column name defaults to ?column?; also, the column data type
defaults to text, which might not be what you wanted. Better style for a string literal in
a view's result is something like:
CREATE VIEW vista AS SELECT text 'Hello World' AS hello;
By default, access to the underlying base relations referenced in the view is determined
by the permissions of the view owner. In some cases, this can be used to provide secure
but restricted access to the underlying tables. However, not all views are secure against
tampering; see Section 39.5 for details.
If the view has the security_invoker property set to true, access to the underlying base
relations is determined by the permissions of the user executing the query, rather than
the view owner. Thus, the user of a security invoker view must have the relevant
permissions on the view and its underlying base relations.
If any of the underlying base relations is a security invoker view, it will be treated as
if it had been accessed directly from the original query. Thus, a security invoker view
will always check its underlying base relations using the permissions of the current user,
even if it is accessed from a view without the security_invoker property.
If any of the underlying base relations has row-level security enabled, then by default,
the row-level security policies of the view owner are applied, and access to any
additional relations referred to by those policies is determined by the permissions of the
view owner. However, if the view has security_invoker set to true, then the policies and
permissions of the invoking user are used instead, as if the base relations had been
referenced directly from the query using the view.
Functions called in the view are treated the same as if they had been called directly from
the query using the view. Therefore, the user of a view must have permissions to call all
functions used by the view. Functions in the view are executed with the privileges of the
user executing the query or the function owner, depending on whether the functions are
defined as SECURITY INVOKER or SECURITY DEFINER. Thus, for example, calling CURRENT_USER
directly in a view will always return the invoking user, not the view owner. This is not
affected by the view's security_invoker setting, and so a view with security_invoker set
to false is not equivalent to a SECURITY DEFINER function and those concepts should not be
confused.
The user creating or replacing a view must have USAGE privileges on any schemas referred
to in the view query, in order to look up the referenced objects in those schemas. Note,
however, that this lookup only happens when the view is created or replaced. Therefore,
the user of the view only requires the USAGE privilege on the schema containing the view,
not on the schemas referred to in the view query, even for a security invoker view.
When CREATE OR REPLACE VIEW is used on an existing view, only the view's defining SELECT
rule, plus any WITH ( ... ) parameters and its CHECK OPTION are changed. Other view
properties, including ownership, permissions, and non-SELECT rules, remain unchanged. You
must own the view to replace it (this includes being a member of the owning role).
Updatable Views
Simple views are automatically updatable: the system will allow INSERT, UPDATE, DELETE,
and MERGE statements to be used on the view in the same way as on a regular table. A view
is automatically updatable if it satisfies all of the following conditions:
• The view must have exactly one entry in its FROM list, which must be a table or
another updatable view.
• The view definition must not contain WITH, DISTINCT, GROUP BY, HAVING, LIMIT, or
OFFSET clauses at the top level.
• The view definition must not contain set operations (UNION, INTERSECT or EXCEPT) at
the top level.
• The view's select list must not contain any aggregates, window functions or
set-returning functions.
An automatically updatable view may contain a mix of updatable and non-updatable columns.
A column is updatable if it is a simple reference to an updatable column of the underlying
base relation; otherwise the column is read-only, and an error will be raised if an
INSERT, UPDATE, or MERGE statement attempts to assign a value to it.
If the view is automatically updatable the system will convert any INSERT, UPDATE, DELETE,
or MERGE statement on the view into the corresponding statement on the underlying base
relation. INSERT statements that have an ON CONFLICT UPDATE clause are fully supported.
If an automatically updatable view contains a WHERE condition, the condition restricts
which rows of the base relation are available to be modified by UPDATE, DELETE, and MERGE
statements on the view. However, an UPDATE or MERGE is allowed to change a row so that it
no longer satisfies the WHERE condition, and thus is no longer visible through the view.
Similarly, an INSERT or MERGE command can potentially insert base-relation rows that do
not satisfy the WHERE condition and thus are not visible through the view (ON CONFLICT
UPDATE may similarly affect an existing row not visible through the view). The CHECK
OPTION may be used to prevent INSERT, UPDATE, and MERGE commands from creating such rows
that are not visible through the view.
If an automatically updatable view is marked with the security_barrier property then all
the view's WHERE conditions (and any conditions using operators which are marked as
LEAKPROOF) will always be evaluated before any conditions that a user of the view has
added. See Section 39.5 for full details. Note that, due to this, rows which are not
ultimately returned (because they do not pass the user's WHERE conditions) may still end
up being locked. EXPLAIN can be used to see which conditions are applied at the relation
level (and therefore do not lock rows) and which are not.
A more complex view that does not satisfy all these conditions is read-only by default:
the system will not allow an INSERT, UPDATE, DELETE, or MERGE on the view. You can get the
effect of an updatable view by creating INSTEAD OF triggers on the view, which must
convert attempted inserts, etc. on the view into appropriate actions on other tables. For
more information see CREATE TRIGGER (CREATE_TRIGGER(7)). Another possibility is to create
rules (see CREATE RULE (CREATE_RULE(7))), but in practice triggers are easier to
understand and use correctly. Also note that MERGE is not supported on relations with
rules.
Note that the user performing the insert, update or delete on the view must have the
corresponding insert, update or delete privilege on the view. In addition, by default, the
view's owner must have the relevant privileges on the underlying base relations, whereas
the user performing the update does not need any permissions on the underlying base
relations (see Section 39.5). However, if the view has security_invoker set to true, the
user performing the update, rather than the view owner, must have the relevant privileges
on the underlying base relations.
EXAMPLES
Create a view consisting of all comedy films:
CREATE VIEW comedies AS
SELECT *
FROM films
WHERE kind = 'Comedy';
This will create a view containing the columns that are in the film table at the time of
view creation. Though * was used to create the view, columns added later to the table will
not be part of the view.
Create a view with LOCAL CHECK OPTION:
CREATE VIEW universal_comedies AS
SELECT *
FROM comedies
WHERE classification = 'U'
WITH LOCAL CHECK OPTION;
This will create a view based on the comedies view, showing only films with kind =
'Comedy' and classification = 'U'. Any attempt to INSERT or UPDATE a row in the view will
be rejected if the new row doesn't have classification = 'U', but the film kind will not
be checked.
Create a view with CASCADED CHECK OPTION:
CREATE VIEW pg_comedies AS
SELECT *
FROM comedies
WHERE classification = 'PG'
WITH CASCADED CHECK OPTION;
This will create a view that checks both the kind and classification of new rows.
Create a view with a mix of updatable and non-updatable columns:
CREATE VIEW comedies AS
SELECT f.*,
country_code_to_name(f.country_code) AS country,
(SELECT avg(r.rating)
FROM user_ratings r
WHERE r.film_id = f.id) AS avg_rating
FROM films f
WHERE f.kind = 'Comedy';
This view will support INSERT, UPDATE and DELETE. All the columns from the films table
will be updatable, whereas the computed columns country and avg_rating will be read-only.
Create a recursive view consisting of the numbers from 1 to 100:
CREATE RECURSIVE VIEW public.nums_1_100 (n) AS
VALUES (1)
UNION ALL
SELECT n+1 FROM nums_1_100 WHERE n < 100;
Notice that although the recursive view's name is schema-qualified in this CREATE, its
internal self-reference is not schema-qualified. This is because the implicitly-created
CTE's name cannot be schema-qualified.
COMPATIBILITY
CREATE OR REPLACE VIEW is a PostgreSQL language extension. So is the concept of a
temporary view. The WITH ( ... ) clause is an extension as well, as are security barrier
views and security invoker views.
SEE ALSO
ALTER VIEW (ALTER_VIEW(7)), DROP VIEW (DROP_VIEW(7)), CREATE MATERIALIZED VIEW
(CREATE_MATERIALIZED_VIEW(7))