Provided by: auditd_4.0.2-2ubuntu1_amd64 
NAME
audit.rules - a set of rules loaded in the kernel audit system
DESCRIPTION
audit.rules is a file containing audit rules that will be loaded by the audit daemon's
init script whenever the daemon is started. The auditctl program is used by the
initscripts to perform this operation. The syntax for the rules is essentially the same as
when typing in an auditctl command at a shell prompt except you do not need to type the
auditctl command name since that is implied. The audit rules come in 3 varieties: control,
file, and syscall.
Control
Control commands generally involve configuring the audit system rather than telling it
what to watch for. These commands typically include deleting all rules, setting the size
of the kernel's backlog queue, setting the failure mode, setting the event rate limit, or
to tell auditctl to ignore syntax errors in the rules and continue loading. Generally,
these rules are at the top of the rules file.
File System
File System rules are sometimes called watches. These rules are used to audit access to
particular files or directories that you may be interested in. If the path given in a
watch rule is a directory, then the rule used is recursive to the bottom of the directory
tree excluding any directories that may be mount points. The syntax of these watch rules
generally follow this format:
-a always,exit -F arch=b64 -F path=path-to-file -F perm=permissions -F key=keyname
where the permission are any one of the following:
r - read of the file
w - write to the file
x - execute the file
a - change in the file's attribute
For best performance, you should supply an arch field in the rule. The individual
permissions will cause the selection of specific system calls that use that kind of
access. Not supplying the arch will cause the selection of all system calls which will
affect performance as all system calls will be evaluated.
Watches can also be created using the deprecated -w format which allows for backwards
compatibility at the expense of system performance as explained. Using syscall rules as
shown above, you can choose between path and dir which is against a specific inode or
directory tree respectively. It should also be noted that the recursive directory watch
will stop if there is a mount point below the parent directory. There is an option to make
the mounted subdirectory equivalent by using a -q rule.
System Call
The system call rules are loaded into a matching engine that intercepts each syscall that
all programs on the system makes. Therefore it is very important to only use syscall rules
when you have to since these affect performance. The more rules, the bigger the
performance hit. You can help the performance, though, by combining syscalls into one rule
whenever possible.
The Linux kernel has 6 rule matching lists or filters as they are sometimes called. They
are: task, exit, user, exclude, filesystem, and io_uring. The task list is checked only
during the fork or clone syscalls. It is rarely used in practice.
The exit filter is the place where all syscall and file system audit requests are
evaluated.
The user filter is used to filter (remove) some events that originate in user space. By
default, any event originating in user space is allowed. So, if there are some events that
you do not want to see, then this is a place where some can be removed. See auditctl(8)
for fields that are valid.
The exclude filter is used to exclude certain events from being emitted. The msgtype and a
number of subject attribute fields can be used to tell the kernel which message types you
do not want to record. This filter can remove the event as a whole and is not selective
about any other attribute. The user and exit filters are better suited to selectively
auditing events. The action is ignored for this filter, defaulting to "never".
The io_uring filter is used to watch underlying syscalls performed by io_uring operations.
Syscall rules take the general form of:
-a action,list -S syscall -F field=value -k keyname
The -a option tells the kernel's rule matching engine that we want to append a rule at the
end of the rule list. But we need to specify which rule list it goes on and what action to
take when it triggers. Valid actions are:
always - always create an event
never - never create an event
The action and list are separated by a comma but no space in between. Valid lists are:
task, exit, user, exclude, filesystem, and io_uring. Their meaning was explained earlier.
Next in the rule would normally be the -S option. This field can either be the syscall
name or number. For readability, the name is almost always used. You may give more than
one syscall in a rule by specifying another -S option. When sent into the kernel, all
syscall fields are put into a mask so that one compare can determine if the syscall is of
interest. So, adding multiple syscalls in one rule is very efficient. When you specify a
syscall name, auditctl will look up the name and get its syscall number. This leads to
some problems on bi-arch machines. The 32 and 64 bit syscall numbers sometimes, but not
always, line up. So, to solve this problem, you would generally need to break the rule
into 2 with one specifying -F arch=b32 and the other specifying -F arch=b64. This needs to
go in front of the -S option so that auditctl looks at the right lookup table when
returning the number.
After the syscall is specified, you would normally have one or more -F options that fine
tune what to match against. Rather than list all the valid field types here, the reader
should look at the auditctl man page which has a full listing of each field and what it
means. But it's worth mentioning a couple things.
The audit system considers uids to be unsigned numbers. The audit system uses the number
-1 to indicate that a loginuid is not set. This means that when it's printed out, it looks
like 4294967295. But when you write rules, you can use either "unset" which is easy to
remember, or -1, or 4294967295. They are all equivalent. If you write a rule that you
wanted try to get the valid users of the system, you need to look in /etc/login.defs to
see where user accounts start. For example, if UID_MIN is 1000, then you would also need
to take into account that the unsigned representation of -1 is higher than 500. So you
would address this with the following piece of a rule:
-F auid>=1000 -F auid!=unset
These individual checks are "anded" and both have to be true.
The last thing to know about syscall rules is that you can add a key field which is a free
form text string that you want inserted into the event to help identify its meaning. This
is discussed in more detail in the NOTES section.
NOTES
The purpose of auditing is to be able to do an investigation periodically or whenever an
incident occurs. A few simple steps in planning up front will make this job easier. The
best advice is to use keys in both the watches and system call rules to give the rule a
meaning. If rules are related or together meet a specific requirement, then give them a
common key name. You can use this during your investigation to select only results with a
specific meaning.
When doing an investigation, you would normally start off with the main aureport output to
just get an idea about what is happening on the system. This report mostly tells you about
events that are hard coded by the audit system such as login/out, uses of authentication,
system anomalies, how many users have been on the machine, and if SE Linux has detected
any AVCs.
aureport --start this-week
After looking at the report, you probably want to get a second view about what rules you
loaded that have been triggering. This is where keys become important. You would generally
run the key summary report like this:
aureport --start this-week --key --summary
This will give an ordered listing of the keys associated with rules that have been
triggering. If, for example, you had a syscall audit rule that triggered on the failure to
open files with EPERM that had a key field of access like this:
-a always,exit -F arch=b64 -S open -S openat -S openat2 -F exit=-EPERM -k access
Then you can isolate these failures with ausearch and pipe the results to aureport for
display. Suppose your investigation noticed a lot of the access denied events. If you
wanted to see the files that unauthorized access has been attempted, you could run the
following command:
ausearch --start this-week -k access --raw | aureport --file --summary
This will give an ordered list showing which files are being accessed with the EPERM
failure. Suppose you wanted to see which users might be having failed access, you would
run the following command:
ausearch --start this-week -k access --raw | aureport --user --summary
If your investigation showed a lot of failed accesses to a particular file, you could run
the following report to see who is doing it:
ausearch --start this-week -k access -f /path-to/file --raw | aureport --user -i
This report will give you the individual access attempts by person. If you needed to see
the actual audit event that is being reported, you would look at the date, time, and event
columns. Assuming the event was 822 and it occurred at 2:30 on 09/01/2009 and you use the
en_US.utf8 locale, the command would look something like this:
ausearch --start 09/01/2009 02:30 -a 822 -i --just-one
This will select the first event from that day and time with the matching event id and
interpret the numeric values into human readable values.
The most important step in being able to do this kind of analysis is setting up key fields
when the rules were originally written. It should also be pointed out that you can have
more than one key field associated with any given rule.
TROUBLESHOOTING
If you are not getting events on syscall rules that you think you should, try running a
test program under strace so that you can see the syscalls. There is a chance that you
might have identified the wrong syscall.
If you get a warning from auditctl saying, "32/64 bit syscall mismatch in line XX, you
should specify an arch". This means that you specified a syscall rule on a bi-arch system
where the syscall has a different syscall number for the 32 and 64 bit interfaces. This
means that on one of those interfaces you are likely auditing the wrong syscall. To solve
the problem, re-write the rule as two rules specifying the intended arch for each rule.
For example,
-a always,exit -S openat -k access
would be rewritten as
-a always,exit -F arch=b32 -S openat -k access
-a always,exit -F arch=b64 -S openat -k access
If you get a warning that says, "entry rules deprecated, changing to exit rule". This
means that you have a rule intended for the entry filter, but that filter is no longer
available. Auditctl moved your rule to the exit filter so that it's not lost. But to solve
this so that you do not get the warning any more, you need to change the offending rule
from entry to exit.
EXAMPLES
The following rule shows how to audit failed access to files due to permission problems.
Note that it takes two rules for each arch ABI to audit this since file access can fail
with two different failure codes indicating permission problems.
-a always,exit -F arch=b32 -S open,openat,openat2 -F exit=-EACCES -k access
-a always,exit -F arch=b32 -S open,openat,openat2 -F exit=-EPERM -k access
-a always,exit -F arch=b64 -S open,openat,openat2 -F exit=-EACCES -k access
-a always,exit -F arch=b64 -S open,openat,openat2 -F exit=-EPERM -k access
IO_URING RULES
Io_uring rules do not take an arch field. It is implicit in the specification of the
filter. The following example rule watches for file opens through the io_uring subsystem:
-a always,io_uring -S openat,openat2 -F key=access
HARD WIRED EVENTS
If auditing is enabled, then you can get any event that is not caused by syscall or file
watch rules (because you don't have any rules loaded). So, that means, any event from
1100-1299, 1326, 1328, 1331 and higher can be emitted. The reason that there are a number
of events that are hardwired is because they are required by regulatory compliance and are
sent automatically as a convenience. (For example, logon/logoff is a mandatory event in
all security guidance.) If you don't want this, you can use the exclude filter to drop
events that you do not want.
-a always,exclude -F msgtype=CRED_REFR
SEE ALSO
auditctl(8), auditd(8).
AUTHOR
Steve Grubb