Provided by: cpl-plugin-giraf-doc_2.16.10+dfsg-1build3_all 
NAME
giscience - Process a science observation.
SYNOPSIS
esorex giscience [OPTIONS] FILE.sof
DESCRIPTION
For detailed information please refer to the GIRAFFE pipeline user manual.
It is available at http://www.eso.org/pipelines.
OPTIONS
--remove-bias <bool>
Enable bias removal (bool; default: True). The full name of this option for the
EsoRex configuration file is giraffe.biasremoval.remove [default = True].
--bsremove-method <str>
Bias removal method (str; default: ´PROFILE´). The full name of this option for the
EsoRex configuration file is giraffe.biasremoval.method [default = PROFILE].
--bsremove-areas <str>
Bias areas to use (Xl0:Xr0:Yl0:Yr0, ... ,Xln:Xrn:Yln:Yrn) (str; default:
´5:40:0:4095´). The full name of this option for the EsoRex configuration file is
giraffe.biasremoval.areas [default = 5:40:0:4095].
--bsremove-sigma <float>
Sigma Clipping: sigma threshold factor (float; default: 2.5). The full name of this
option for the EsoRex configuration file is giraffe.biasremoval.sigma [default =
2.5].
--bsremove-niter <int>
Sigma Clipping: maximum number of iterations (int; default: 5). The full name of
this option for the EsoRex configuration file is giraffe.biasremoval.iterations
[default = 5].
--bsremove-mfrac <float>
Sigma Clipping: minimum fraction of points accepted/total [0.0..1.0] (float;
default: 0.8). The full name of this option for the EsoRex configuration file is
giraffe.biasremoval.fraction [default = 0.8].
--bsremove-xorder <int>
Order of X polynomial fit (CURVE method only) (int; default: 1). The full name of
this option for the EsoRex configuration file is giraffe.biasremoval.xorder
[default = 1].
--bsremove-yorder <int>
Order of Y polynomial fit (CURVE method only) (int; default: 1). The full name of
this option for the EsoRex configuration file is giraffe.biasremoval.yorder
[default = 1].
--bsremove-xstep <int>
Sampling step along X (CURVE method only) (int; default: 1). The full name of this
option for the EsoRex configuration file is giraffe.biasremoval.xstep [default =
1].
--bsremove-ystep <int>
Sampling step along Y (CURVE method only) (int; default: 1). The full name of this
option for the EsoRex configuration file is giraffe.biasremoval.ystep [default =
1].
--extr-method <str>
Extraction method: ´SUM´, ´HORNE´ or ´OPTIMAL´ (str; default: ´SUM´). The full name
of this option for the EsoRex configuration file is giraffe.extraction.method
[default = SUM].
--extr-ron <float>
New bias sigma (RON) value for bias and dark corrected image (float; default:
-1.0). The full name of this option for the EsoRex configuration file is
giraffe.extraction.ron [default = -1.0].
--extr-psfmodel <str>
PSF profile model: `psfexp´, `psfexp2´ (str; default: ´psfexp2´). The full name of
this option for the EsoRex configuration file is giraffe.extraction.psf.model
[default = psfexp2].
--extr-psfsigma <float>
Sigma clippging threshold used for rejecting data points during PSF fitting
(Horne´s sigma). It is used to reject bad pixels and cosmics. (float; default:
7.0). The full name of this option for the EsoRex configuration file is
giraffe.extraction.psf.sigma [default = 7.0].
--extr-psfniter <int>
Maximum number of iterations used for fitting the PSF profile. (int; default: 2).
The full name of this option for the EsoRex configuration file is
giraffe.extraction.psf.iterations [default = 2].
--extr-hewidth <int>
Horne extraction method: Number of extra pixels added to the fiber half-width.
(int; default: 2). The full name of this option for the EsoRex configuration file
is giraffe.extraction.horne.extrawidth [default = 2].
--extr-hmingood <int>
Horne extraction method: Minimum number of points used for the profile fit. It sets
the lower limit of data points for the pixel rejection. (int; default: 3). The
full name of this option for the EsoRex configuration file is
giraffe.extraction.horne.mingood [default = 3].
--extr-omfrac <float>
Optimal extraction method: Minimum fraction of the data points used for fitting the
fiber profiles. It sets the lower limit for the pixel rejection. (float; default:
0.9). The full name of this option for the EsoRex configuration file is
giraffe.extraction.optimal.fraction [default = 0.9].
--extr-owfactor <float>
Optimal extraction method: Factor by which the fiber PSF half width is multiplied.
Adjacent spectra within this area are assumed to affect the spectrum being
extracted. (float; default: 3.0). The full name of this option for the EsoRex
configuration file is giraffe.extraction.optimal.wfactor [default = 3.0].
--extr-obkgorder <int>
Optimal extraction method: Order of the polynomial background model, which is
fitted for each wavelength bin along the spatial direction. (int; default: 2). The
full name of this option for the EsoRex configuration file is
giraffe.extraction.optimal.bkgorder [default = 2].
--flat-apply <bool>
Controls the flat field correction. (bool; default: True). The full name of this
option for the EsoRex configuration file is giraffe.flat.apply [default = True].
--transmission-apply <bool>
Controls the fiber to fiber transmission correction. (bool; default: False). The
full name of this option for the EsoRex configuration file is
giraffe.flat.transmission [default = False].
--rbin-method <str>
Method to use : `linear´ or `spline´ (str; default: ´linear´). The full name of
this option for the EsoRex configuration file is giraffe.rebinning.method [default
= linear].
--rbin-xresid <bool>
Use x residuals during rebinning? `true´/`false´ (bool; default: True). The full
name of this option for the EsoRex configuration file is
giraffe.rebinning.xresiduals [default = True].
--rbin-lstep <float>
Lambda step size, only used if scaling method is ´linear´ (float; default: 0.005).
The full name of this option for the EsoRex configuration file is
giraffe.rebinning.lstep [default = 0.005].
--rbin-scmethod <str>
Scaling method: `log´ or `linear´ (str; default: ´linear´). The full name of this
option for the EsoRex configuration file is giraffe.rebinning.scalemethod [default
= linear].
--rbin-size <int>
Size of output rebinned spectra, 0 means calculate size based on wavelength range
and lambda stepsize (int; default: 0). The full name of this option for the EsoRex
configuration file is giraffe.rebinning.size [default = 0].
--rbin-range <str>
Rebinning range: `setup´ or `common´ (str; default: ´setup´). The full name of this
option for the EsoRex configuration file is giraffe.rebinning.range [default =
setup].
--siwc-apply <bool>
Enable simultaneous wavelength calibration correction. (bool; default: True). The
full name of this option for the EsoRex configuration file is giraffe.siwc.apply
[default = True].
--scal-cniter <int>
Slit geometry calibration maximum number of iterations. (int; default: 1). The full
name of this option for the EsoRex configuration file is
giraffe.sgcalibration.iterations [default = 1].
--scal-zmax <float>
Maximum allowed pixel value. To be effective it must be larger than 0. (float;
default: 10000.0). The full name of this option for the EsoRex configuration file
is giraffe.sgcalibration.zmax [default = 10000.0].
--scal-cstep <float>
Cross-correlation step. (float; default: -0.005). The full name of this option for
the EsoRex configuration file is giraffe.sgcalibration.cc.step [default = -0.005].
--scal-cdomain <str>
Restricts the cross-correlation to the given domain. (str; default: ´0.,0.´). The
full name of this option for the EsoRex configuration file is
giraffe.sgcalibration.cc.domain [default = 0.,0.].
--scal-rvlimits <str>
Delta RV limits of the cross-correlation window in km/s. (str; default:
´-200.,200.´). The full name of this option for the EsoRex configuration file is
giraffe.sgcalibration.rv.limits [default = -200.,200.].
--scal-rvniter <int>
Maximum number of iterations used for the RV determination. (int; default: 3). The
full name of this option for the EsoRex configuration file is
giraffe.sgcalibration.rv.iterations [default = 3].
--scal-rvwfactor <float>
Data window width factor. The FWHM times this value determines the window width.
(float; default: 1.5). The full name of this option for the EsoRex configuration
file is giraffe.sgcalibration.rv.wfactor [default = 1.5].
--scal-pfniter <int>
Peak model fit maximum number of iterations. (int; default: 50). The full name of
this option for the EsoRex configuration file is
giraffe.sgcalibration.peak.iterations [default = 50].
--scal-pfntest <int>
Cross-correlation peak fit maximum number of tests (int; default: 7). The full name
of this option for the EsoRex configuration file is
giraffe.sgcalibration.peak.tests [default = 7].
--scal-pfdchisq <float>
Cross-correlation peak fit minimum chi-square difference. (float; default: 0.0001).
The full name of this option for the EsoRex configuration file is
giraffe.sgcalibration.peak.dchisquare [default = 0.0001].
--recon-min <float>
Minimum wavelength for image reconstruction (float; default: 0.0). The full name of
this option for the EsoRex configuration file is giraffe.fov.range.minimum [default
= 0.0].
--recon-max <float>
Maximum wavelength for image reconstruction (float; default: 0.0). The full name of
this option for the EsoRex configuration file is giraffe.fov.range.maximum [default
= 0.0].
--recon-cube <bool>
Turns data cube creation on and off (bool; default: True). The full name of this
option for the EsoRex configuration file is giraffe.fov.cube [default = True].
--recon-format <str>
Selects the file format for cubes (str; default: ´single´). The full name of this
option for the EsoRex configuration file is giraffe.fov.cube.format [default =
single].
--generate-SDP-format <bool>
TRUE if additional files should be generated in Science Data Product (SDP) format.
(bool; default: False). The full name of this option for the EsoRex configuration
file is giraffe.sdp.format.generate [default = False].
--dummy-association-keys <int>
Sets the number of dummy (empty) ASSONi, ASSOCi and ASSOMi keywords to create.
(int; default: 0). The full name of this option for the EsoRex configuration file
is giraffe.sdp.nassoc.keys [default = 0].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the giraf pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/giraffe/giraf-pipeline-manual-2.11.pdf
An overview over the existing ESO pipelines can be found on the web page
https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
https://packages.python.org/python-cpl/index.html for further information.
The other recipes of the giraf pipeline are giframestack(7), gimasterbias(7),
gimasterdark(7), gimasterflat(7), gistandard(7), giwavecalibration(7)
VERSION
giscience 2.16.10
AUTHOR
Giraffe Pipeline <https://support.eso.org/>
BUG REPORTS
Please report any problems to https://support.eso.org/. Alternatively, you may send a
report to the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the GIRAFFE Instrument Pipeline
Copyright (C) 2002-2014 European Southern Observatory
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA