NAME

       pipewire-pulse-modules - PipeWire Pulseaudio modules

DESCRIPTION

       PipeWire's Pulseaudio emulation implements several Pulseaudio modules. It only supports
       its own built-in modules, and cannot load external modules written for Pulseaudio.

LOADING MODULES

       The built-in modules can be loaded using Pulseaudio client programs, for example pactl
       load-module <module-name> <module-options>. They can also added to pipewire-pulse.conf,
       typically by a drop-in file in ~/.config/pipewire/pipewire-pulse.conf.d/ containing the
       module name and its arguments

       # ~/.config/pipewire/pipewire-pulse.conf.d/custom.conf

       pulse.cmd = [
           { cmd = "load-module" args = "module-null-sink sink_name=foo" flags = [ ] }
       ]

       To list all modules currently loaded, with their arguments:

       pactl list modules

       For a short list of loaded modules:

       pactl list modules short

       Modules may be unloaded using either the module-name or index number:

       pactl load-module <module-name> <parameters>
       pactl unload-module <module-name|index#>

COMMON MODULE OPTIONS

       Most modules that create streams/devices support the following properties:

   sink_name, source_name
       Name for the sink (resp. source). Allowed characters in the name are a-z, A-Z, numbers,
       period (.) and underscore (_). The length must be 1-128 characters.

   format
       The sample format. The supported audio formats are:

   PCM
       • u8: unsigned 8-bit integer

       • aLaw: A-law encoded 8-bit integer

       • uLaw: μ-law encoded 8-bit integer

       • s16le: signed 16-bit little-endian integer

       • s16be: signed 16-bit big-endian integer

       • s16, s16ne: native-endian aliases for s16le or s16be

       • s16re: reverse-endian alias for s16le or s16be

       • float32le: 32-bit little-endian float

       • float32be: 32-bit big-endian float

       • float32, float32ne: native-endian aliases for float32le or float32be

       • float32re: reverse-endian alias for float32le or float32be

       • s32le: signed 32-bit little-endian integer

       • s32be: signed 32-bit big-endian integer

       • s32, s32ne: native-endian aliases for s32le or s32be

       • s32re: reverse-endian alias for s32le or s32be

       • s24le: signed 24-bit little-endian integer (note: ALSA calls this 'S24_3LE')

       • s24be: signed 24-bit big-endian integer (note: ALSA calls this 'S24_3BE')

       • s24, s24ne: native-endian aliases for s24le or s24be

       • s24re: reverse-endian alias for s24le or s24be

       • s24-32le: signed 24-bit little-endian integer, packed into a 32-bit integer so that the
         8 most significant bits are ignored (note: ALSA calls this 'S24_LE')

       • s24-32be: signed 24-bit big-endian integer, packed into a 32-bit integer so that the 8
         most significant bits are ignored (note: ALSA calls this 'S24_BE')

       • s24-32, s24-32ne: native-endian aliases for s24-32le or s24-32be

       • s24-32re: reverse-endian alias for s24-32le or s24-32be

   Compressed audio formats
       Below is a list of all supported compressed formats. The code at the beginning of each
       line is used whenever a textual identifier for a format is needed (for example in
       configuration files or on the command line). The formats whose identifier ends with
       -iec61937 have to be wrapped in IEC 61937 frames, which makes the compressed audio behave
       more like normal PCM audio.

       • ac3-iec61937: Dolby Digital (DD / AC-3 / A/52)

       • eac3-iec61937: Dolby Digital Plus (DD+ / E-AC-3)

       • mpeg-iec61937: MPEG-1 or MPEG-2 Part 3 (not MPEG-2 AAC)

       • dts-iec61937: DTS

       • mpeg2-aac-iec61937: MPEG-2 AAC (supported since PulseAudio 4.0)

       • truehd-iec61937: Dolby TrueHD (added in PulseAudio 13.0, but doesn't work yet in
         practice)

       • dtshd-iec61937: DTS-HD Master Audio (added in PulseAudio 13.0, but doesn't work yet in
         practice)

       • pcm: PCM (not a compressed format, but listed here, because pcm is one of the recognized
         encoding identifiers)

       • any: (special identifier for indicating that any encoding can be used)

   rate
       The sample rate.

   channels
       Number of audio channels.

   channel_map
       A channel map. A list of comma-separated channel names. The currently defined channel
       names are: left, right, mono, center, front-left, front-right, front-center, rear-center,
       rear-left, rear-right, lfe, subwoofer, front-left-of-center, front-right-of-center, side-
       left, side-right, aux0, aux1 to aux15, top-center, top-front-left, top-front-right, top-
       front-center, top-rear-left, top-rear-right, top-rear-center

   sink_properties, source_properties
       Set additional properties of the sink/source. For example, you can set the description
       directly when the module is loaded by setting this parameter.

       load-module module-alsa-sink sink_name=headphones sink_properties=device.description=Headphones

BUILT-IN MODULES

       • pipewire-pulse-module-alsa-sink(7)
       • pipewire-pulse-module-alsa-source(7)
       • pipewire-pulse-module-always-sink(7)
       • pipewire-pulse-module-combine-sink(7)
       • pipewire-pulse-module-device-manager(7)
       • pipewire-pulse-module-device-restore(7)
       • pipewire-pulse-module-echo-cancel(7)
       • pipewire-pulse-module-jackdbus-detect(7)
       • pipewire-pulse-module-ladspa-sink(7)
       • pipewire-pulse-module-ladspa-source(7)
       • pipewire-pulse-module-loopback(7)
       • pipewire-pulse-module-native-protocol-tcp(7)
       • pipewire-pulse-module-null-sink(7)
       • pipewire-pulse-module-pipe-source(7)
       • pipewire-pulse-module-pipe-sink(7)
       • pipewire-pulse-module-raop-discover(7)
       • pipewire-pulse-module-remap-sink(7)
       • pipewire-pulse-module-remap-source(7)
       • pipewire-pulse-module-roc-sink(7)
       • pipewire-pulse-module-roc-sink-input(7)
       • pipewire-pulse-module-roc-source(7)
       • pipewire-pulse-module-rtp-recv(7)
       • pipewire-pulse-module-rtp-send(7)
       • pipewire-pulse-module-simple-protocol-tcp(7)
       • pipewire-pulse-module-stream-restore(7)
       • pipewire-pulse-module-switch-on-connect(7)
       • pipewire-pulse-module-tunnel-sink(7)
       • pipewire-pulse-module-tunnel-source(7)
       • pipewire-pulse-module-virtual-sink(7)
       • pipewire-pulse-module-virtual-source(7)
       • pipewire-pulse-module-x11-bell(7)
       • pipewire-pulse-module-zeroconf-discover(7)
       • pipewire-pulse-module-zeroconf-publish(7)
       • pipewire-pulse-module-gsettings(7)

AUTHORS

       The PipeWire Developers <https://gitlab.freedesktop.org/pipewire/pipewire/issues>;
       PipeWire is available from <https://pipewire.org>

SEE ALSO

       pipewire-pulse(1)