Provided by: isc-dhcp-client_4.4.3-P1-4ubuntu2_amd64 
NAME
dhclient-script - DHCP client network configuration script
DESCRIPTION
The DHCP client network configuration script is invoked from time to time by dhclient(8).
This script is used by the dhcp client to set each interface's initial configuration prior
to requesting an address, to test the address once it has been offered, and to set the
interface's final configuration once a lease has been acquired. If no lease is acquired,
the script is used to test predefined leases, if any, and also called once if no valid
lease can be identified.
This script is not meant to be customized by the end user. If local customizations are
needed, they should be possible using the enter and exit hooks provided (see HOOKS for
details). These hooks will allow the user to override the default behaviour of the
client in creating a /etc/resolv.conf file.
No standard client script exists for some operating systems, even though the actual client
may work, so a pioneering user may well need to create a new script or modify an existing
one. In general, customizations specific to a particular computer should be done in the
/etc/dhcp/dhclient.conf file. If you find that you can't make such a customization
without customizing /etc/dhcp/dhclient.conf or using the enter and exit hooks, please
submit a bug report.
HOOKS
When it starts, the client script first defines a shell function, make_resolv_conf , which
is later used to create the /etc/resolv.conf file. To override the default behaviour,
redefine this function in the enter hook script.
After defining the make_resolv_conf function, the client script checks for the presence of
an executable /etc/dhcp/dhclient-enter-hooks script, and if present, it invokes the script
inline, using the Bourne shell ´.´ command. It also invokes all executable scripts in
/etc/dhcp/dhclient-enter-hooks.d/* in the same way. The entire environment documented
under OPERATION is available to this script, which may modify the environment if needed to
change the behaviour of the script. If an error occurs during the execution of the
script, it can set the exit_status variable to a nonzero value, and /sbin/dhclient-script
will exit with that error code immediately after the client script exits.
After all processing has completed, /sbin/dhclient-script checks for the presence of an
executable /etc/dhcp/dhclient-exit-hooks script, which if present is invoked using the '.'
command. All executable scripts in /etc/dhcp/dhclient-exit-hooks.d/* are also invoked.
The exit status of dhclient-script will be passed to dhclient-exit-hooks in the
exit_status shell variable, and will always be zero if the script succeeded at the task
for which it was invoked. The rest of the environment as described previously for
dhclient-enter-hooks is also present. The /etc/dhcp/dhclient-exit-hooks and
/etc/dhcp/dhclient-exit-hooks.d/* scripts can modify the value of exit_status to change
the exit status of dhclient-script.
OPERATION
When dhclient needs to invoke the client configuration script, it defines a set of
variables in the environment, and then invokes /sbin/dhclient-script. In all cases,
$reason is set to the name of the reason why the script has been invoked. The following
reasons are currently defined: MEDIUM, PREINIT, BOUND, RENEW, REBIND, REBOOT, EXPIRE,
FAIL, STOP, RELEASE, NBI and TIMEOUT.
MEDIUM
The DHCP client is requesting that an interface's media type be set. The interface name
is passed in $interface, and the media type is passed in $medium.
PREINIT
The DHCP client is requesting that an interface be configured as required in order to send
packets prior to receiving an actual address. For clients which use the BSD socket
library, this means configuring the interface with an IP address of 0.0.0.0 and a
broadcast address of 255.255.255.255. For other clients, it may be possible to simply
configure the interface up without actually giving it an IP address at all. The
interface name is passed in $interface, and the media type in $medium.
If an IP alias has been declared in dhclient.conf, its address will be passed in
$alias_ip_address, and that ip alias should be deleted from the interface, along with any
routes to it.
BOUND
The DHCP client has done an initial binding to a new address. The new ip address is
passed in $new_ip_address, and the interface name is passed in $interface. The media
type is passed in $medium. Any options acquired from the server are passed using the
option name described in dhcp-options, except that dashes (´-´) are replaced by
underscores (´_´) in order to make valid shell variables, and the variable names start
with new_. So for example, the new subnet mask would be passed in $new_subnet_mask.
Options from a non-default universe will have the universe name prepended to the option
name, for example $new_dhcp6_server_id. The options that the client explicitly requested
via a PRL or ORO option are passed with the same option name as above but prepended with
requested_ and with a value of 1, for example requested_subnet_mask=1. No such variable
is defined for options not requested by the client or options that don't require a request
option, such as the ip address (*_ip_address) or expiration time (*_expiry).
Before actually configuring the address, dhclient-script should somehow ARP for it and
exit with a nonzero status if it receives a reply. In this case, the client will send a
DHCPDECLINE message to the server and acquire a different address. This may also be done
in the RENEW, REBIND, or REBOOT states, but is not required, and indeed may not be
desirable.
When a binding has been completed, a lot of network parameters are likely to need to be
set up. A new /etc/resolv.conf needs to be created, using the values of $new_domain_name
and $new_domain_name_servers (which may list more than one server, separated by spaces).
A default route should be set using $new_routers, and static routes may need to be set up
using $new_static_routes.
If an IP alias has been declared, it must be set up here. The alias IP address will be
written as $alias_ip_address, and other DHCP options that are set for the alias (e.g.,
subnet mask) will be passed in variables named as described previously except starting
with $alias_ instead of $new_. Care should be taken that the alias IP address not be
used if it is identical to the bound IP address ($new_ip_address), since the other alias
parameters may be incorrect in this case.
RENEW
When a binding has been renewed, the script is called as in BOUND, except that in addition
to all the variables starting with $new_, and $requested_ there is another set of
variables starting with $old_. Persistent settings that may have changed need to be
deleted - for example, if a local route to the bound address is being configured, the old
local route should be deleted. If the default route has changed, the old default route
should be deleted. If the static routes have changed, the old ones should be deleted.
Otherwise, processing can be done as with BOUND.
REBIND
The DHCP client has rebound to a new DHCP server. This can be handled as with RENEW,
except that if the IP address has changed, the ARP table should be cleared.
REBOOT
The DHCP client has successfully reacquired its old address after a reboot. This can be
processed as with BOUND.
EXPIRE
The DHCP client has failed to renew its lease or acquire a new one, and the lease has
expired. The IP address must be relinquished, and all related parameters should be
deleted, as in RENEW and REBIND.
FAIL
The DHCP client has been unable to contact any DHCP servers, and any leases that have been
tested have not proved to be valid. The parameters from the last lease tested should be
deconfigured. This can be handled in the same way as EXPIRE.
STOP
The dhclient has been informed to shut down gracefully, the dhclient-script should
unconfigure or shutdown the interface as appropriate.
RELEASE
The dhclient has been executed using the -r flag, indicating that the administrator wishes
it to release its lease(s). dhclient-script should unconfigure or shutdown the interface.
NBI
No-Broadcast-Interfaces...dhclient was unable to find any interfaces upon which it
believed it should commence DHCP. What dhclient-script should do in this situation is
entirely up to the implementor.
TIMEOUT
The DHCP client has been unable to contact any DHCP servers. However, an old lease has
been identified, and its parameters have been passed in as with BOUND. The client
configuration script should test these parameters and, if it has reason to believe they
are valid, should exit with a value of zero. If not, it should exit with a nonzero
value.
V6ONLY
The DHCPv4 client has received a requested valid v6-only-preferred option. The system
should disable IPv4 on the interface. On its side the dhclient waits for V6ONLY_WAIT
seconds (the timer is carried by the option with a minimum of MIN_V6ONLY_WAIT) before
returning in the INIT state.
The usual way to test a lease is to set up the network as with REBIND (since this may be
called to test more than one lease) and then ping the first router defined in $routers.
If a response is received, the lease must be valid for the network to which the interface
is currently connected. It would be more complete to try to ping all of the routers
listed in $new_routers, as well as those listed in $new_static_routes, but current scripts
do not do this.
FILES
Each operating system should generally have its own script file, although the script files
for similar operating systems may be similar or even identical. The script files
included in Internet Systems Consortium DHCP distribution appear in the distribution tree
under client/scripts, and bear the names of the operating systems on which they are
intended to work.
BUGS
If more than one interface is being used, there's no obvious way to avoid clashes between
server-supplied configuration parameters - for example, the stock dhclient-script rewrites
/etc/resolv.conf. If more than one interface is being configured, /etc/resolv.conf will
be repeatedly initialized to the values provided by one server, and then the other.
Assuming the information provided by both servers is valid, this shouldn't cause any real
problems, but it could be confusing.
SEE ALSO
dhclient(8), dhcpd(8), dhcrelay(8), dhclient.conf(5) and dhclient.leases(5).
AUTHOR
dhclient-script(8) To learn more about Internet Systems Consortium, see
https://www.isc.org.
dhclient-script(8)