Ubuntu Manpage: lpadmin - configure cups printers and classes

Provided by: cups-client_2.4.11-0ubuntu1_amd64

NAME

       lpadmin - configure cups printers and classes

SYNOPSIS

       lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -d destination
       lpadmin  [  -E  ]  [ -U username ] [ -h server[:port] ] -p destination [ -R name-default ]
       option(s)
       lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -x destination

DESCRIPTION

       lpadmin configures printer and class queues provided by CUPS.  It can also be used to  set
       the server default printer or class.

       When  specified  before  the  -d,  -p, or -x options, the -E option forces encryption when
       connecting to the server.

       The first form of the command (-d) sets the  default  printer  or  class  to  destination.
       Subsequent print jobs submitted via the lp(1) or lpr(1) commands will use this destination
       unless the user specifies otherwise with the lpoptions(1) command.

       The second form of the command (-p) configures the named printer or class.  The additional
       options are described below.

       The  third  form  of  the command (-x) deletes the printer or class destination.  Any jobs
       that are pending for the destination will be removed and any job that is currently printed
       will be aborted.

OPTIONS

The following options are recognized when configuring a printer queue:

-c class
Adds the named printer to class. If class does not exist it is created
automatically.

-m model
Sets a standard PPD file for the printer from the model directory or using one of the
driver interfaces. Use the -m option with the lpinfo(8) command to get a list of
supported models. The model "raw" clears any existing PPD file and the model
"everywhere" queries the printer referred to by the specified IPP device-uri. Note:
Models other than "everywhere" are deprecated and will not be supported in a future
version of CUPS.

-o cupsIPPSupplies=true

-o cupsIPPSupplies=false
Specifies whether IPP supply level values should be reported.

-o cupsSNMPSupplies=true

-o cupsSNMPSupplies=false
Specifies whether SNMP supply level (RFC 3805) values should be reported.

-o job-k-limit=value
Sets the kilobyte limit for per-user quotas. The value is an integer number of
kilobytes; one kilobyte is 1024 bytes.

-o job-page-limit=value
Sets the page limit for per-user quotas. The value is the integer number of pages
that can be printed; double-sided pages are counted as two pages.

-o job-quota-period=value
Sets the accounting period for per-user quotas. The value is an integer number of
seconds; 86,400 seconds are in one day.

-o job-sheets-default=banner

-o job-sheets-default=banner,banner
Sets the default banner page(s) to use for print jobs.

-o name=value
Sets a PPD option for the printer. PPD options can be listed using the -l option
with the lpoptions(1) command.

-o name-default=value
Sets a default server-side option for the destination. Any print-time option can be
defaulted, e.g., "-o number-up-default=2" to set the default "number-up" option value
to 2.

-o port-monitor=name
Sets the binary communications program to use when printing, "none", "bcp", or
"tbcp". The default program is "none". The specified port monitor must be listed in
the printer's PPD file.

-o printer-error-policy=name
Sets the policy for errors such as printers that cannot be found or accessed, don't
support the format being printed, fail during submission of the print data, or cause
one or more filters to crash. The name must be one of "abort-job" (abort the job on
error), "retry-job" (retry the job at a future time), "retry-current-job" (retry the
current job immediately), or "stop-printer" (stop the printer on error). The default
error policy is "stop-printer" for printers and "retry-current-job" for classes.

-o printer-is-shared=true

-o printer-is-shared=false
Sets the destination to shared/published or unshared/unpublished. Shared/published
destinations are publicly announced by the server on the LAN based on the browsing
configuration in cupsd.conf, while unshared/unpublished destinations are not
announced. The default value is "true".

-o printer-op-policy=name
Sets the IPP operation policy associated with the destination. The name must be
defined in the cupsd.conf in a Policy section. The default operation policy is
"default".

-R name-default
Deletes the named option from printer.

-r class
Removes the named printer from class. If the resulting class becomes empty it is
removed.

-u allow:{user|@group}{,user|,@group}*

-u deny:{user|@group}{,user|,@group}*

-u allow:all

-u deny:none
Sets user-level access control on a destination. Names starting with "@" are
interpreted as UNIX groups. The latter two forms turn user-level access control off.
Note: The user 'root' is not granted special access - using "-u allow:foo,bar" will
allow users 'foo' and 'bar' to access the printer but NOT 'root'.

-v "device-uri"
Sets the device-uri attribute of the printer queue. Use the -v option with the
lpinfo(8) command to get a list of supported device URIs and schemes.

-D "info"
Provides a textual description of the destination.

-E When specified before the -d, -p, or -x options, forces the use of TLS encryption on
the connection to the scheduler. Otherwise, enables the destination and accepts
jobs; this is the same as running the cupsaccept(8) and cupsenable(8) programs on the
destination.

-L "location"
Provides a textual location of the destination.

DEPRECATED OPTIONS

       The following lpadmin options are deprecated:

       -i filename
            This  option historically has been used to provide either a System V interface script
            or (as an implementation side-effect) a PPD file.  Note: Interface  scripts  are  not
            supported  by  CUPS.   PPD  files  and printer drivers are deprecated and will not be
            supported in a future version of CUPS.

       -P ppd-file
            Specifies a PostScript Printer Description (PPD) file to use with the printer.  Note:
            PPD  files  and  printer drivers are deprecated and will not be supported in a future
            version of CUPS.

CONFORMING TO

       Unlike the System V printing system, CUPS allows printer names to  contain  any  printable
       character  except  SPACE,  TAB,  "/", or "#".  Also, printer and class names are not case-
       sensitive.

       Finally, the CUPS version of lpadmin may ask the user for an access password depending  on
       the  printing system configuration.  This differs from the System V version which requires
       the root user to execute this command.

NOTES

       CUPS printer drivers and backends are deprecated and will no  longer  be  supported  in  a
       future  feature  release of CUPS.  Printers that do not support IPP can be supported using
       applications such as ippeveprinter(1).

       The CUPS version of lpadmin does not support all of  the  System  V  or  Solaris  printing
       system configuration options.

       Interface scripts are not supported for security reasons.

       The double meaning of the -E option is an unfortunate historical oddity.

       The  lpadmin  command  communicates  with  the  scheduler  (cupsd)  to make changes to the
       printing system configuration.  This configuration information is stored in several  files
       including  printers.conf  and classes.conf.  These files should not be edited directly and
       are an implementation detail of CUPS that is subject to change at any time.

EXAMPLE

       Create an IPP Everywhere print queue:

           lpadmin -p myprinter -E -v ipp://myprinter.local/ipp/print -m everywhere

COPYRIGHT

       Copyright © 2020-2024 by OpenPrinting.