Ubuntu Manpage: podman-build - Build a container image using a Containerfile

NAME

       podman-build - Build a container image using a Containerfile

SYNOPSIS

       podman build [options] [context]

       podman image build [options] [context]

DESCRIPTION

podman build Builds an image using instructions from one or more Containerfiles or Dockerfiles and a
specified build context directory. A Containerfile uses the same syntax as a Dockerfile internally. For
this document, a file referred to as a Containerfile can be a file named either 'Containerfile' or
'Dockerfile' exclusively. Any file that has additional extension attached will not be recognized by
podman build . unless a -f flag is used to specify the file.

The build context directory can be specified as the http(s) URL of an archive, git repository or
Containerfile.

When invoked with -f and a path to a Containerfile, with no explicit CONTEXT directory, Podman uses the
Containerfile's parent directory as its build context.

Containerfiles ending with a ".in" suffix are preprocessed via CPP(1). This can be useful to decompose
Containerfiles into several reusable parts that can be used via CPP's #include directive. Containerfiles
ending in .in are restricted to no comment lines unless they are CPP commands. Note, a Containerfile.in
file can still be used by other tools when manually preprocessing them via cpp -E.

When the URL is an archive, the contents of the URL is downloaded to a temporary location and extracted
before execution.

When the URL is a Containerfile, the Containerfile is downloaded to a temporary location.

When a Git repository is set as the URL, the repository is cloned locally and then set as the context. A
URL is treated as a Git repository if it has a git:// prefix or a .git suffix.

NOTE: podman build uses code sourced from the Buildah project to build container images. This Buildah
code creates Buildah containers for the RUN options in container storage. In certain situations, when the
podman build crashes or users kill the podman build process, these external containers can be left in
container storage. Use the podman ps --all --external command to see these containers.

podman buildx build command is an alias of podman build. Not all buildx build features are available in
Podman. The buildx build option is provided for scripting compatibility.

OPTIONS

--add-host=hostname[;hostname[;...]]:ip
Add a custom host-to-IP mapping to the container's /etc/hosts file.

The option takes one or multiple semicolon-separated hostnames to be mapped to a single IPv4 or IPv6
address, separated by a colon. It can also be used to overwrite the IP addresses of hostnames Podman adds
to /etc/hosts by default (also see the --name and --hostname options). This option can be specified
multiple times to add additional mappings to /etc/hosts. It conflicts with the --no-hosts option and
conflicts with no_hosts=true in containers.conf.

Instead of an IP address, the special flag host-gateway can be given. This resolves to an IP address the
container can use to connect to the host. The IP address chosen depends on your network setup, thus
there's no guarantee that Podman can determine the host-gateway address automatically, which will then
cause Podman to fail with an error message. You can overwrite this IP address using the
host_containers_internal_ip option in containers.conf.

The host-gateway address is also used by Podman to automatically add the host.containers.internal and
host.docker.internal hostnames to /etc/hosts. You can prevent that by either giving the --no-hosts
option, or by setting host_containers_internal_ip="none" in containers.conf. If no host-gateway address
was configured manually and Podman fails to determine the IP address automatically, Podman will silently
skip adding these internal hostnames to /etc/hosts. If Podman is running in a virtual machine using
podman machine (this includes Mac and Windows hosts), Podman will silently skip adding the internal
hostnames to /etc/hosts, unless an IP address was configured manually; the internal hostnames are
resolved by the gvproxy DNS resolver instead.

Podman will use the /etc/hosts file of the host as a basis by default, i.e. any hostname present in this
file will also be present in the /etc/hosts file of the container. A different base file can be
configured using the base_hosts_file config in containers.conf.

--all-platforms
Instead of building for a set of platforms specified using the --platform option, inspect the build's
base images, and build for all of the platforms for which they are all available. Stages that use
scratch as a starting point can not be inspected, so at least one non-scratch stage must be present for
detection to work usefully.

--annotation=annotation=value
Add an image annotation (e.g. annotation=value) to the image metadata. Can be used multiple times.

Note: this information is not present in Docker image formats, so it is discarded when writing images in
Docker formats.

--arch=arch
Set the architecture of the image to be built, and that of the base image to be pulled, if the build uses
one, to the provided value instead of using the architecture of the build host. Unless overridden,
subsequent lookups of the same image in the local storage matches this architecture, regardless of the
host. (Examples: arm, arm64, 386, amd64, ppc64le, s390x)

--authfile=path
Path of the authentication file. Default is ${XDG_RUNTIME_DIR}/containers/auth.json on Linux, and
$HOME/.config/containers/auth.json on Windows/macOS. The file is created by podman login. If the
authorization state is not found there, $HOME/.docker/config.json is checked, which is set using docker
login.

Note: There is also the option to override the default path of the authentication file by setting the
REGISTRY_AUTH_FILE environment variable. This can be done with export REGISTRY_AUTH_FILE=path.

--build-arg=arg=value
Specifies a build argument and its value, which is interpolated in instructions read from the
Containerfiles in the same way that environment variables are, but which are not added to environment
variable list in the resulting image's configuration.

--build-arg-file=path
Specifies a file containing lines of build arguments of the form arg=value. The suggested file name is
argfile.conf.

Comment lines beginning with # are ignored, along with blank lines. All others must be of the arg=value
format passed to --build-arg.

If several arguments are provided via the --build-arg-file and --build-arg options, the build arguments
are merged across all of the provided files and command line arguments.

Any file provided in a --build-arg-file option is read before the arguments supplied via the --build-arg
option.

When a given argument name is specified several times, the last instance is the one that is passed to the
resulting builds. This means --build-arg values always override those in a --build-arg-file.

--build-context=name=value
Specify an additional build context using its short name and its location. Additional build contexts can
be referenced in the same manner as we access different stages in COPY instruction.

Valid values are:

• Local directory – e.g. --build-context project2=../path/to/project2/src

• HTTP URL to a tarball – e.g. --build-context src=https://example.org/releases/src.tar

• Container image – specified with a container-image:// prefix, e.g. --build-context alpine=container-
image://alpine:3.15, (also accepts docker://, docker-image://)

On the Containerfile side, reference the build context on all commands that accept the “from” parameter.
Here’s how that might look:

FROM [name]
COPY --from=[name] ...
RUN --mount=from=[name] …

The value of [name] is matched with the following priority order:

• Named build context defined with --build-context [name]=..

• Stage defined with AS [name] inside Containerfile

• Image [name], either local or in a remote registry

--cache-from=image
Repository to utilize as a potential cache source. When specified, Buildah tries to look for cache images
in the specified repository and attempts to pull cache images instead of actually executing the build
steps locally. Buildah only attempts to pull previously cached images if they are considered as valid
cache hits.

Use the --cache-to option to populate a remote repository with cache content.

Example

# populate a cache and also consult it
buildah build -t test --layers --cache-to registry/myrepo/cache --cache-from registry/myrepo/cache .

Note: --cache-from option is ignored unless --layers is specified.

--cache-to=image
Set this flag to specify a remote repository that is used to store cache images. Buildah attempts to push
newly built cache image to the remote repository.

Note: Use the --cache-from option in order to use cache content in a remote repository.

Example

# populate a cache and also consult it
buildah build -t test --layers --cache-to registry/myrepo/cache --cache-from registry/myrepo/cache .

Note: --cache-to option is ignored unless --layers is specified.

--cache-ttl
Limit the use of cached images to only consider images with created timestamps less than duration ago.
For example if --cache-ttl=1h is specified, Buildah considers intermediate cache images which are created
under the duration of one hour, and intermediate cache images outside this duration is ignored.

Note: Setting --cache-ttl=0 manually is equivalent to using --no-cache in the implementation since this
means that the user does not want to use cache at all.

--cap-add=CAP_xxx
When executing RUN instructions, run the command specified in the instruction with the specified
capability added to its capability set. Certain capabilities are granted by default; this option can be
used to add more.

--cap-drop=CAP_xxx
When executing RUN instructions, run the command specified in the instruction with the specified
capability removed from its capability set. The CAP_CHOWN, CAP_DAC_OVERRIDE, CAP_FOWNER, CAP_FSETID,
CAP_KILL, CAP_NET_BIND_SERVICE, CAP_SETFCAP, CAP_SETGID, CAP_SETPCAP, and CAP_SETUID capabilities are
granted by default; this option can be used to remove them.

If a capability is specified to both the --cap-add and --cap-drop options, it is dropped, regardless of
the order in which the options were given.

--cert-dir=path
Use certificates at path (*.crt, *.cert, *.key) to connect to the registry. (Default:
/etc/containers/certs.d) For details, see containers-certs.d(5). (This option is not available with the
remote Podman client, including Mac and Windows (excluding WSL2) machines)

--cgroup-parent=path
Path to cgroups under which the cgroup for the container is created. If the path is not absolute, the
path is considered to be relative to the cgroups path of the init process. Cgroups are created if they do
not already exist.

--cgroupns=how
Sets the configuration for cgroup namespaces when handling RUN instructions. The configured value can be
"" (the empty string) or "private" to indicate that a new cgroup namespace is created, or it can be
"host" to indicate that the cgroup namespace in which buildah itself is being run is reused.

--compat-volumes
Handle directories marked using the VOLUME instruction (both in this build, and those inherited from base
images) such that their contents can only be modified by ADD and COPY instructions. Any changes made in
those locations by RUN instructions will be reverted. Before the introduction of this option, this
behavior was the default, but it is now disabled by default.

--compress
This option is added to be aligned with other containers CLIs. Podman doesn't communicate with a daemon
or a remote server. Thus, compressing the data before sending it is irrelevant to Podman. (This option
is not available with the remote Podman client, including Mac and Windows (excluding WSL2) machines)

--cpp-flag=flags
Set additional flags to pass to the C Preprocessor cpp(1). Containerfiles ending with a ".in" suffix is
preprocessed via cpp(1). This option can be used to pass additional flags to cpp.Note: You can also set
default CPPFLAGS by setting the BUILDAH_CPPFLAGS environment variable (e.g., export
BUILDAH_CPPFLAGS="-DDEBUG").

--cpu-period=limit
Set the CPU period for the Completely Fair Scheduler (CFS), which is a duration in microseconds. Once the
container's CPU quota is used up, it will not be scheduled to run until the current period ends. Defaults
to 100000 microseconds.

On some systems, changing the resource limits may not be allowed for non-root users. For more details,
see https://github.com/containers/podman/blob/main/troubleshooting.md#26-running-containers-with-
resource-limits-fails-with-a-permissions-error

This option is not supported on cgroups V1 rootless systems.

--cpu-quota=limit
Limit the CPU Completely Fair Scheduler (CFS) quota.

Limit the container's CPU usage. By default, containers run with the full CPU resource. The limit is a
number in microseconds. If a number is provided, the container is allowed to use that much CPU time until
the CPU period ends (controllable via --cpu-period).

This option is not supported on cgroups V1 rootless systems.

--cpu-shares, -c=shares
CPU shares (relative weight).

By default, all containers get the same proportion of CPU cycles. This proportion can be modified by
changing the container's CPU share weighting relative to the combined weight of all the running
containers. Default weight is 1024.

The proportion only applies when CPU-intensive processes are running. When tasks in one container are
idle, other containers can use the left-over CPU time. The actual amount of CPU time varies depending on
the number of containers running on the system.

For example, consider three containers, one has a cpu-share of 1024 and two others have a cpu-share
setting of 512. When processes in all three containers attempt to use 100% of CPU, the first container
receives 50% of the total CPU time. If a fourth container is added with a cpu-share of 1024, the first
container only gets 33% of the CPU. The remaining containers receive 16.5%, 16.5% and 33% of the CPU.

On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if a container is
limited to less than 100% of CPU time, it can use 100% of each individual CPU core.

For example, consider a system with more than three cores. If the container C0 is started with --cpu-
shares=512 running one process, and another container C1 with --cpu-shares=1024 running two processes,
this can result in the following division of CPU shares:

┌─────┬───────────┬─────┬──────────────┐
│ PID │ container │ CPU │ CPU share │
├─────┼───────────┼─────┼──────────────┤
│ 100 │ C0 │ 0 │ 100% of CPU0 │
├─────┼───────────┼─────┼──────────────┤
│ 101 │ C1 │ 1 │ 100% of CPU1 │
├─────┼───────────┼─────┼──────────────┤
│ 102 │ C1 │ 2 │ 100% of CPU2 │
└─────┴───────────┴─────┴──────────────┘

This option is not supported on cgroups V1 rootless systems.

--cpuset-cpus=number
CPUs in which to allow execution. Can be specified as a comma-separated list (e.g. 0,1), as a range (e.g.
0-3), or any combination thereof (e.g. 0-3,7,11-15).

This option is not supported on cgroups V1 rootless systems.

--cpuset-mems=nodes
Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems.

If there are four memory nodes on the system (0-3), use --cpuset-mems=0,1 then processes in the container
only uses memory from the first two memory nodes.

This option is not supported on cgroups V1 rootless systems.

--created-annotation
Add an image annotation (see also --annotation) to the image metadata setting
"org.opencontainers.image.created" to the current time, or to the datestamp specified to the --source-
date-epoch or --timestamp flag, if either was used. If false, no such annotation will be present in the
written image.

Note: this information is not present in Docker image formats, so it is discarded when writing images in
Docker formats.

--creds=[username[:password]]
The [username[:password]] to use to authenticate with the registry, if required. If one or both values
are not supplied, a command line prompt appears and the value can be entered. The password is entered
without echo.

Note that the specified credentials are only used to authenticate against target registries. They are
not used for mirrors or when the registry gets rewritten (see containers-registries.conf(5)); to
authenticate against those consider using a containers-auth.json(5) file.

--cw=options
Produce an image suitable for use as a confidential workload running in a trusted execution environment
(TEE) using krun (i.e., crun built with the libkrun feature enabled and invoked as krun). Instead of the
conventional contents, the root filesystem of the image will contain an encrypted disk image and
configuration information for krun.

The value for options is a comma-separated list of key=value pairs, supplying configuration information
which is needed for producing the additional data which will be included in the container image.

Recognized keys are:

attestation_url: The location of a key broker / attestation server. If a value is specified, the new
image's workload ID, along with the passphrase used to encrypt the disk image, will be registered with
the server, and the server's location will be stored in the container image. At run-time, krun is
expected to contact the server to retrieve the passphrase using the workload ID, which is also stored in
the container image. If no value is specified, a passphrase value must be specified.

cpus: The number of virtual CPUs which the image expects to be run with at run-time. If not specified, a
default value will be supplied.

firmware_library: The location of the libkrunfw-sev shared library. If not specified, buildah checks for
its presence in a number of hard-coded locations.

memory: The amount of memory which the image expects to be run with at run-time, as a number of
megabytes. If not specified, a default value will be supplied.

passphrase: The passphrase to use to encrypt the disk image which will be included in the container
image. If no value is specified, but an attestation_url value is specified, a randomly-generated
passphrase will be used. The authors recommend setting an attestation_url but not a passphrase.

slop: Extra space to allocate for the disk image compared to the size of the container image's contents,
expressed either as a percentage (..%) or a size value (bytes, or larger units if suffixes like KB or MB
are present), or a sum of two or more such specifications. If not specified, buildah guesses that 25%
more space than the contents will be enough, but this option is provided in case its guess is wrong.

type: The type of trusted execution environment (TEE) which the image should be marked for use with.
Accepted values are "SEV" (AMD Secure Encrypted Virtualization - Encrypted State) and "SNP" (AMD Secure
Encrypted Virtualization - Secure Nested Paging). If not specified, defaults to "SNP".

workload_id: A workload identifier which will be recorded in the container image, to be used at run-time
for retrieving the passphrase which was used to encrypt the disk image. If not specified, a semi-random
value will be derived from the base image's image ID.

This option is not supported on the remote client, including Mac and Windows (excluding WSL2) machines.

--decryption-key=key[:passphrase]
The [key[:passphrase]] to be used for decryption of images. Key can point to keys and/or certificates.
Decryption is tried with all keys. If the key is protected by a passphrase, it is required to be passed
in the argument and omitted otherwise.

--device=host-device[:container-device][:permissions]
Add a host device to the container. Optional permissions parameter can be used to specify device
permissions by combining r for read, w for write, and m for mknod(2).

Example: --device=/dev/sdc:/dev/xvdc:rwm.

Note: if host-device is a symbolic link then it is resolved first. The container only stores the major
and minor numbers of the host device.

Podman may load kernel modules required for using the specified device. The devices that Podman loads
modules for when necessary are: /dev/fuse.

In rootless mode, the new device is bind mounted in the container from the host rather than Podman
creating it within the container space. Because the bind mount retains its SELinux label on SELinux
systems, the container can get permission denied when accessing the mounted device. Modify SELinux
settings to allow containers to use all device labels via the following command:

$ sudo setsebool -P container_use_devices=true

Note: if the user only has access rights via a group, accessing the device from inside a rootless
container fails. The crun(1) runtime offers a workaround for this by adding the option --annotation
run.oci.keep_original_groups=1.

--disable-compression, -D
Don't compress filesystem layers when building the image unless it is required by the location where the
image is being written. This is the default setting, because image layers are compressed automatically
when they are pushed to registries, and images being written to local storage only need to be
decompressed again to be stored. Compression can be forced in all cases by specifying --disable-
compression=false.

--disable-content-trust
This is a Docker-specific option to disable image verification to a container registry and is not
supported by Podman. This option is a NOOP and provided solely for scripting compatibility.

--dns=ipaddr
Set custom DNS servers.

This option can be used to override the DNS configuration passed to the container. Typically this is
necessary when the host DNS configuration is invalid for the container (e.g., 127.0.0.1). When this is
the case the --dns flag is necessary for every run.

The special value none can be specified to disable creation of /etc/resolv.conf in the container by
Podman. The /etc/resolv.conf file in the image is then used without changes.

Note that ipaddr may be added directly to the container's /etc/resolv.conf. This is not guaranteed
though. For example, passing a custom network whose dns_enabled is set to true to --network will result
in /etc/resolv.conf only referring to the aardvark-dns server. aardvark-dns then forwards to the
supplied ipaddr for all non-container name queries.

This option cannot be combined with --network that is set to none.

Note: this option takes effect only during RUN instructions in the build. It does not affect
/etc/resolv.conf in the final image.

--dns-option=option
Set custom DNS options to be used during the build.

--dns-search=domain
Set custom DNS search domains to be used during the build.

--env=env[=value]
Add a value (e.g. env=value) to the built image. Can be used multiple times. If neither = nor a value
are specified, but env is set in the current environment, the value from the current environment is added
to the image. To remove an environment variable from the built image, use the --unsetenv option.

--file, -f=Containerfile
Specifies a Containerfile which contains instructions for building the image, either a local file or an
http or https URL. If more than one Containerfile is specified, FROM instructions are only be accepted
from the last specified file.

If a build context is not specified, and at least one Containerfile is a local file, the directory in
which it resides is used as the build context.

Specifying the option -f - causes the Containerfile contents to be read from stdin.

--force-rm
Always remove intermediate containers after a build, even if the build fails (default true).

--format
Control the format for the built image's manifest and configuration data. Recognized formats include oci
(OCI image-spec v1.0, the default) and docker (version 2, using schema format 2 for the manifest).

Note: You can also override the default format by setting the BUILDAH_FORMAT environment variable.
export BUILDAH_FORMAT=docker

--from
Overrides the first FROM instruction within the Containerfile. If there are multiple FROM instructions
in a Containerfile, only the first is changed.

With the remote podman client, not all container transports work as expected. For example, oci-
archive:/x.tar references /x.tar on the remote machine instead of on the client. When using podman remote
clients it is best to restrict use to containers-storage, and docker:// transports.

--group-add=group | keep-groups
Assign additional groups to the primary user running within the container process.

• keep-groups is a special flag that tells Podman to keep the supplementary group access.

Allows container to use the user's supplementary group access. If file systems or devices are only
accessible by the rootless user's group, this flag tells the OCI runtime to pass the group access into
the container. Currently only available with the crun OCI runtime. Note: keep-groups is exclusive, other
groups cannot be specified with this flag. (Not available for remote commands, including Mac and Windows
(excluding WSL2) machines)

--help, -h
Print usage statement

--hooks-dir=path
Each *.json file in the path configures a hook for buildah build containers. For more details on the
syntax of the JSON files and the semantics of hook injection. Buildah currently support both the 1.0.0
and 0.1.0 hook schemas, although the 0.1.0 schema is deprecated.

This option may be set multiple times; paths from later options have higher precedence.

For the annotation conditions, buildah uses any annotations set in the generated OCI configuration.

For the bind-mount conditions, only mounts explicitly requested by the caller via --volume are
considered. Bind mounts that buildah inserts by default (e.g. /dev/shm) are not considered.

If --hooks-dir is unset for root callers, Buildah currently defaults to /usr/share/containers/oci/hooks.d
and /etc/containers/oci/hooks.d in order of increasing precedence. Using these defaults is deprecated.
Migrate to explicitly setting --hooks-dir.

--http-proxy
By default proxy environment variables are passed into the container if set for the Podman process. This
can be disabled by setting the value to false. The environment variables passed in include http_proxy,
https_proxy, ftp_proxy, no_proxy, and also the upper case versions of those. This option is only needed
when the host system must use a proxy but the container does not use any proxy. Proxy environment
variables specified for the container in any other way overrides the values that have been passed through
from the host. (Other ways to specify the proxy for the container include passing the values with the
--env flag, or hard coding the proxy environment at container build time.) When used with the remote
client it uses the proxy environment variables that are set on the server process.

Defaults to true.

--identity-label
Adds default identity label io.buildah.version if set. (default true).

--ignorefile
Path to an alternative .containerignore file.

--iidfile=ImageIDfile
Write the built image's ID to the file. When --platform is specified more than once, attempting to use
this option triggers an error.

--inherit-annotations=bool-value
Inherit the annotations from the base image or base stages. (default true). Use cases which set this
flag to false may need to do the same for the --created-annotation flag.

--inherit-labels
Inherit the labels from the base image or base stages. (default true).

--ipc=how
Sets the configuration for IPC namespaces when handling RUN instructions. The configured value can be ""
(the empty string) or "container" to indicate that a new IPC namespace is created, or it can be "host" to
indicate that the IPC namespace in which podman itself is being run is reused, or it can be the path to
an IPC namespace which is already in use by another process.

--isolation=type
Controls what type of isolation is used for running processes as part of RUN instructions. Recognized
types include oci (OCI-compatible runtime, the default), rootless (OCI-compatible runtime invoked using a
modified configuration and its --rootless option enabled, with --no-new-keyring --no-pivot added to its
create invocation, with network and UTS namespaces disabled, and IPC, PID, and user namespaces enabled;
the default for unprivileged users), and chroot (an internal wrapper that leans more toward chroot(1)
than container technology).

Note: You can also override the default isolation type by setting the BUILDAH_ISOLATION environment
variable. export BUILDAH_ISOLATION=oci

--jobs=number
Run up to N concurrent stages in parallel. If the number of jobs is greater than 1, stdin is read from
/dev/null. If 0 is specified, then there is no limit in the number of jobs that run in parallel.

--label=label
Add an image label (e.g. label=value) to the image metadata. Can be used multiple times.

Users can set a special LABEL io.containers.capabilities=CAP1,CAP2,CAP3 in a Containerfile that specifies
the list of Linux capabilities required for the container to run properly. This label specified in a
container image tells Podman to run the container with just these capabilities. Podman launches the
container with just the specified capabilities, as long as this list of capabilities is a subset of the
default list.

If the specified capabilities are not in the default set, Podman prints an error message and runs the
container with the default capabilities.

--layer-label=label[=value]
Add an intermediate image label (e.g. label=value) to the intermediate image metadata. It can be used
multiple times.

If label is named, but neither = nor a value is provided, then the label is set to an empty value.

--layers
Cache intermediate images during the build process (Default is true).

Note: You can also override the default value of layers by setting the BUILDAH_LAYERS environment
variable. export BUILDAH_LAYERS=true

--logfile=filename
Log output which is sent to standard output and standard error to the specified file instead of to
standard output and standard error. This option is not supported on the remote client, including Mac and
Windows (excluding WSL2) machines.

--logsplit=bool-value
If --logfile and --platform are specified, the --logsplit option allows end-users to split the log file
for each platform into different files in the following format: ${logfile}_${platform-os}_${platform-
arch}. This option is not supported on the remote client, including Mac and Windows (excluding WSL2)
machines.

--manifest=manifest
Name of the manifest list to which the image is added. Creates the manifest list if it does not exist.
This option is useful for building multi architecture images.

--memory, -m=number[unit]
Memory limit. A unit can be b (bytes), k (kibibytes), m (mebibytes), or g (gibibytes).

Allows the memory available to a container to be constrained. If the host supports swap memory, then the
-m memory setting can be larger than physical RAM. If a limit of 0 is specified (not using -m), the
container's memory is not limited. The actual limit may be rounded up to a multiple of the operating
system's page size (the value is very large, that's millions of trillions).

This option is not supported on cgroups V1 rootless systems.

--memory-swap=number[unit]
A limit value equal to memory plus swap. A unit can be b (bytes), k (kibibytes), m (mebibytes), or g
(gibibytes).

Must be used with the -m (--memory) flag. The argument value must be larger than that of
-m (--memory) By default, it is set to double the value of --memory.

Set number to -1 to enable unlimited swap.

This option is not supported on cgroups V1 rootless systems.

--network=mode, --net
Sets the configuration for network namespaces when handling RUN instructions.

Valid mode values are:

• none: no networking.

• host: use the Podman host network stack. Note: the host mode gives the container full access to local
system services such as D-bus and is therefore considered insecure.

• ns:path: path to a network namespace to join.

• private: create a new namespace for the container (default)

• <network name|ID>: Join the network with the given name or ID, e.g. use --network mynet to join the
network with the name mynet. Only supported for rootful users.

• slirp4netns[:OPTIONS,...]: use slirp4netns(1) to create a user network stack. It is possible to specify
these additional options, they can also be set with network_cmd_options in containers.conf:

• allow_host_loopback=true|false: Allow slirp4netns to reach the host loopback IP (default is 10.0.2.2
or the second IP from slirp4netns cidr subnet when changed, see the cidr option below). The default
is false.

• mtu=MTU: Specify the MTU to use for this network. (Default is 65520).

• cidr=CIDR: Specify ip range to use for this network. (Default is 10.0.2.0/24).

• enable_ipv6=true|false: Enable IPv6. Default is true. (Required for outbound_addr6).

• outbound_addr=INTERFACE: Specify the outbound interface slirp binds to (ipv4 traffic only).

• outbound_addr=IPv4: Specify the outbound ipv4 address slirp binds to.

• outbound_addr6=INTERFACE: Specify the outbound interface slirp binds to (ipv6 traffic only).

• outbound_addr6=IPv6: Specify the outbound ipv6 address slirp binds to.

• pasta[:OPTIONS,...]: use pasta(1) to create a user-mode networking stack.
This is the default for rootless containers and only supported in rootless mode.
By default, IPv4 and IPv6 addresses and routes, as well as the pod interface name, are copied from the
host. If port forwarding isn't configured, ports are forwarded dynamically as services are bound on
either side (init namespace or container namespace). Port forwarding preserves the original source IP
address. Options described in pasta(1) can be specified as comma-separated arguments.
In terms of pasta(1) options, --config-net is given by default, in order to configure networking when
the container is started, and --no-map-gw is also assumed by default, to avoid direct access from
container to host using the gateway address. The latter can be overridden by passing --map-gw in the
pasta-specific options (despite not being an actual pasta(1) option).
Also, -t none and -u none are passed to disable automatic port forwarding based on bound ports.
Similarly, -T none and -U none are given to disable the same functionality from container to host.
Some examples:

• pasta:--map-gw: Allow the container to directly reach the host using the gateway address.

• pasta:--mtu,1500: Specify a 1500 bytes MTU for the tap interface in the container.

• pasta:--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,-m,1500,--no-ndp,--no-
dhcpv6,--no-dhcp, equivalent to default slirp4netns(1) options: disable IPv6, assign 10.0.2.0/24 to
the tap0 interface in the container, with gateway 10.0.2.3, enable DNS forwarder reachable at
10.0.2.3, set MTU to 1500 bytes, disable NDP, DHCPv6 and DHCP support.

• pasta:-I,tap0,--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,--no-ndp,--no-
dhcpv6,--no-dhcp, equivalent to default slirp4netns(1) options with Podman overrides: same as above,
but leave the MTU to 65520 bytes

• pasta:-t,auto,-u,auto,-T,auto,-U,auto: enable automatic port forwarding based on observed bound ports
from both host and container sides

• pasta:-T,5201: enable forwarding of TCP port 5201 from container to host, using the loopback
interface instead of the tap interface for improved performance

--no-cache
Do not use existing cached images for the container build. Build from the start with a new set of cached
layers.

--no-hostname
Do not create the /etc/hostname file in the containers.

By default, Podman manages the /etc/hostname file, adding the container's own hostname. When the --no-
hostname option is set, the image's /etc/hostname will be preserved unmodified if it exists.

--no-hosts
Do not modify the /etc/hosts file in the container.

Podman assumes control over the container's /etc/hosts file by default and adds entries for the
container's name (see --name option) and hostname (see --hostname option), the internal
host.containers.internal and host.docker.internal hosts, as well as any hostname added using the --add-
host option. Refer to the --add-host option for details. Passing --no-hosts disables this, so that the
image's /etc/hosts file is kept unmodified. The same can be achieved globally by setting no_hosts=true in
containers.conf.

This option conflicts with --add-host.

--omit-history
Omit build history information in the built image. (default false).

This option is useful for the cases where end users explicitly want to set --omit-history to omit the
optional History from built images or when working with images built using build tools that do not
include History information in their images.

--os=string
Set the OS of the image to be built, and that of the base image to be pulled, if the build uses one,
instead of using the current operating system of the build host. Unless overridden, subsequent lookups of
the same image in the local storage matches this OS, regardless of the host.

--os-feature=feature
Set the name of a required operating system feature for the image which is built. By default, if the
image is not based on scratch, the base image's required OS feature list is kept, if the base image
specified any. This option is typically only meaningful when the image's OS is Windows.

If feature has a trailing -, then the feature is removed from the set of required features which is
listed in the image.

--os-version=version
Set the exact required operating system version for the image which is built. By default, if the image
is not based on scratch, the base image's required OS version is kept, if the base image specified one.
This option is typically only meaningful when the image's OS is Windows, and is typically set in Windows
base images, so using this option is usually unnecessary.

--output, -o=output-opts
Output destination (format: type=local,dest=path)

The --output (or -o) option extends the default behavior of building a container image by allowing users
to export the contents of the image as files on the local filesystem, which can be useful for generating
local binaries, code generation, etc. (This option is not available with the remote Podman client,
including Mac and Windows (excluding WSL2) machines)

The value for --output is a comma-separated sequence of key=value pairs, defining the output type and
options.

Supported keys are: - dest: Destination path for exported output. Valid value is absolute or relative
path, - means the standard output. - type: Defines the type of output to be used. Valid values is
documented below.

Valid type values are: - local: write the resulting build files to a directory on the client-side. -
tar: write the resulting files as a single tarball (.tar).

If no type is specified, the value defaults to local. Alternatively, instead of a comma-separated
sequence, the value of --output can be just a destination (in the dest format) (e.g. --output some-path,
--output -) where --output some-path is treated as if type=local and --output - is treated as if
type=tar.

--pid=pid
Sets the configuration for PID namespaces when handling RUN instructions. The configured value can be ""
(the empty string) or "container" to indicate that a new PID namespace is created, or it can be "host" to
indicate that the PID namespace in which podman itself is being run is reused, or it can be the path to a
PID namespace which is already in use by another process.

--platform=os/arch[/variant][,...]
Set the os/arch of the built image (and its base image, when using one) to the provided value instead of
using the current operating system and architecture of the host (for example linux/arm). Unless
overridden, subsequent lookups of the same image in the local storage matches this platform, regardless
of the host.

If --platform is set, then the values of the --arch, --os, and --variant options is overridden.

The --platform option can be specified more than once, or given a comma-separated list of values as its
argument. When more than one platform is specified, the --manifest option is used instead of the --tag
option.

Os/arch pairs are those used by the Go Programming Language. In several cases the arch value for a
platform differs from one produced by other tools such as the arch command. Valid OS and architecture
name combinations are listed as values for $GOOS and $GOARCH at
https://golang.org/doc/install/source#environment, and can also be found by running go tool dist list.

While podman build is happy to use base images and build images for any platform that exists, RUN
instructions are unable to succeed without the help of emulation provided by packages like qemu-user-
static.

--pull=policy
Pull image policy. The default is missing.

• always: Always pull the image and throw an error if the pull fails.

• missing: Only pull the image when it does not exist in the local containers storage. Throw an error if
no image is found and the pull fails.

• never: Never pull the image but use the one from the local containers storage. Throw an error when no
image is found.

• newer: Pull if the image on the registry is newer than the one in the local containers storage. An
image is considered to be newer when the digests are different. Comparing the time stamps is prone to
errors. Pull errors are suppressed if a local image was found.

--quiet, -q
Suppress output messages which indicate which instruction is being processed, and of progress when
pulling images from a registry, and when writing the output image.

--retry=attempts
Number of times to retry pulling or pushing images between the registry and local storage in case of
failure. Default is 3.

--retry-delay=duration
Duration of delay between retry attempts when pulling or pushing images between the registry and local
storage in case of failure. The default is to start at two seconds and then exponentially back off. The
delay is used when this value is set, and no exponential back off occurs.

--rewrite-timestamp
When generating new layers for the image, ensure that no newly added content bears a timestamp later than
the value used by the --source-date-epoch flag, if one was provided, by replacing any timestamps which
are later than that value, with that value.

--rm
Remove intermediate containers after a successful build (default true).

--runtime=path
The path to an alternate OCI-compatible runtime, which is used to run commands specified by the RUN
instruction.

Note: You can also override the default runtime by setting the BUILDAH_RUNTIME environment variable.
export BUILDAH_RUNTIME=/usr/local/bin/runc

--runtime-flag=flag
Adds global flags for the container runtime. To list the supported flags, please consult the manpages of
the selected container runtime.

Default runtime flags can be added in containers.conf.

Note: Do not pass the leading -- to the flag. To pass the runc flag --log-format json to buildah build,
the option given is --runtime-flag log-format=json.

--sbom=preset
Generate SBOMs (Software Bills Of Materials) for the output image by scanning the working container and
build contexts using the named combination of scanner image, scanner commands, and merge strategy. Must
be specified with one or more of --sbom-image-output, --sbom-image-purl-output, --sbom-output, and
--sbom-purl-output. Recognized presets, and the set of options which they equate to:

• "syft", "syft-cyclonedx":
--sbom-scanner-image=ghcr.io/anchore/syft
--sbom-scanner-command="/syft scan -q dir:{ROOTFS} --output cyclonedx-json={OUTPUT}"
--sbom-scanner-command="/syft scan -q dir:{CONTEXT} --output cyclonedx-json={OUTPUT}"
--sbom-merge-strategy=merge-cyclonedx-by-component-name-and-version

• "syft-spdx":
--sbom-scanner-image=ghcr.io/anchore/syft
--sbom-scanner-command="/syft scan -q dir:{ROOTFS} --output spdx-json={OUTPUT}"
--sbom-scanner-command="/syft scan -q dir:{CONTEXT} --output spdx-json={OUTPUT}"
--sbom-merge-strategy=merge-spdx-by-package-name-and-versioninfo

• "trivy", "trivy-cyclonedx":
--sbom-scanner-image=ghcr.io/aquasecurity/trivy
--sbom-scanner-command="trivy filesystem -q {ROOTFS} --format cyclonedx --output {OUTPUT}"
--sbom-scanner-command="trivy filesystem -q {CONTEXT} --format cyclonedx --output {OUTPUT}"
--sbom-merge-strategy=merge-cyclonedx-by-component-name-and-version

• "trivy-spdx":
--sbom-scanner-image=ghcr.io/aquasecurity/trivy
--sbom-scanner-command="trivy filesystem -q {ROOTFS} --format spdx-json --output {OUTPUT}"
--sbom-scanner-command="trivy filesystem -q {CONTEXT} --format spdx-json --output {OUTPUT}"
--sbom-merge-strategy=merge-spdx-by-package-name-and-versioninfo

--sbom-image-output=path
When generating SBOMs, store the generated SBOM in the specified path in the output image. There is no
default.

--sbom-image-purl-output=path
When generating SBOMs, scan them for PURL (package URL
⟨https://github.com/package-url/purl-spec/blob/master/PURL-SPECIFICATION.rst⟩) information, and save a
list of found PURLs to the specified path in the output image. There is no default.

--sbom-merge-strategy=method
If more than one --sbom-scanner-command value is being used, use the specified method to merge the output
from later commands with output from earlier commands. Recognized values include:

• cat
Concatenate the files.

• merge-cyclonedx-by-component-name-and-version
Merge the "component" fields of JSON documents, ignoring values from
documents when the combination of their "name" and "version" values is
already present. Documents are processed in the order in which they are
generated, which is the order in which the commands that generate them
were specified.

• merge-spdx-by-package-name-and-versioninfo
Merge the "package" fields of JSON documents, ignoring values from
documents when the combination of their "name" and "versionInfo" values is
already present. Documents are processed in the order in which they are
generated, which is the order in which the commands that generate them
were specified.

--sbom-output=file
When generating SBOMs, store the generated SBOM in the named file on the local filesystem. There is no
default.

--sbom-purl-output=file
When generating SBOMs, scan them for PURL (package URL
⟨https://github.com/package-url/purl-spec/blob/master/PURL-SPECIFICATION.rst⟩) information, and save a
list of found PURLs to the named file in the local filesystem. There is no default.

--sbom-scanner-command=image
Generate SBOMs by running the specified command from the scanner image. If multiple commands are
specified, they are run in the order in which they are specified. These text substitutions are
performed:
- {ROOTFS}
The root of the built image's filesystem, bind mounted.
- {CONTEXT}
The build context and additional build contexts, bind mounted.
- {OUTPUT}
The name of a temporary output file, to be read and merged with others or copied elsewhere.

--sbom-scanner-image=image
Generate SBOMs using the specified scanner image.

--secret=id=id[,src=envOrFile][,env=ENV][,type=file | env]
Pass secret information to be used in the Containerfile for building images in a safe way that will not
end up stored in the final image, or be seen in other stages. The value of the secret will be read from
an environment variable or file named by the "id" option, or named by the "src" option if it is
specified, or from an environment variable specified by the "env" option. See EXAMPLES ⟨#examples⟩. The
secret will be mounted in the container at /run/secrets/id by default.

To later use the secret, use the --mount flag in a RUN instruction within a Containerfile:

RUN --mount=type=secret,id=mysecret cat /run/secrets/mysecret

The location of the secret in the container can be overridden using the "target", "dst", or "destination"
option of the RUN --mount flag.

RUN --mount=type=secret,id=mysecret,target=/run/secrets/myothersecret cat /run/secrets/myothersecret

Note: changing the contents of secret files will not trigger a rebuild of layers that use said secrets.

--security-opt=option
Security Options

• apparmor=unconfined : Turn off apparmor confinement for the container

• apparmor=alternate-profile : Set the apparmor confinement profile for the container

• label=user:USER : Set the label user for the container processes

• label=role:ROLE : Set the label role for the container processes

• label=type:TYPE : Set the label process type for the container processes

• label=level:LEVEL : Set the label level for the container processes

• label=filetype:TYPE : Set the label file type for the container files

• label=disable : Turn off label separation for the container

• no-new-privileges : Disable container processes from gaining additional privileges

• seccomp=unconfined : Turn off seccomp confinement for the container

• seccomp=profile.json : JSON file to be used as the seccomp filter for the container.

--shm-size=number[unit]
Size of /dev/shm. A unit can be b (bytes), k (kibibytes), m (mebibytes), or g (gibibytes). If the unit
is omitted, the system uses bytes. If the size is omitted, the default is 64m. When size is 0, there is
no limit on the amount of memory used for IPC by the container. This option conflicts with --ipc=host.

--sign-by=fingerprint
Sign the image using a GPG key with the specified FINGERPRINT. (This option is not available with the
remote Podman client, including Mac and Windows (excluding WSL2) machines,)

--skip-unused-stages
Skip stages in multi-stage builds which don't affect the target stage. (Default: true).

--source-date-epoch=seconds
Set the "created" timestamp for the built image to this number of seconds since the epoch (Unix time 0,
i.e., 00:00:00 UTC on 1 January 1970) (default is to use the value set in the SOURCE_DATE_EPOCH
environment variable, or the current time if it is not set).

The "created" timestamp is written into the image's configuration and manifest when the image is
committed, so running the same build two different times will ordinarily produce images with different
sha256 hashes, even if no other changes were made to the Containerfile and build context.

When this flag is set, a SOURCE_DATE_EPOCH build arg will provide its value for a stage in which it is
declared.

When this flag is set, the image configuration's "created" timestamp is always set to the time specified,
which should allow for identical images to be built at different times using the same set of inputs.

When this flag is set, output written as specified to the --output flag will bear exactly the specified
timestamp.

Conflicts with the similar --timestamp flag, which also sets its specified time on the contents of new
layers.

--squash
Squash all of the image's new layers into a single new layer; any preexisting layers are not squashed.

--squash-all
Squash all of the new image's layers (including those inherited from a base image) into a single new
layer.

--ssh=default | id[=socket>
SSH agent socket or keys to expose to the build. The socket path can be left empty to use the value of
default=$SSH_AUTH_SOCK

To later use the ssh agent, use the --mount option in a RUN instruction within a Containerfile:

RUN --mount=type=ssh,id=id mycmd

--stdin
Pass stdin into the RUN containers. Sometime commands being RUN within a Containerfile want to request
information from the user. For example apt asking for a confirmation for install. Use --stdin to be able
to interact from the terminal during the build.

--tag, -t=imageName
Specifies the name which is assigned to the resulting image if the build process completes successfully.
If imageName does not include a registry name, the registry name localhost is prepended to the image
name.

--target=stageName
Set the target build stage to build. When building a Containerfile with multiple build stages, --target
can be used to specify an intermediate build stage by name as the final stage for the resulting image.
Commands after the target stage is skipped.

--timestamp=seconds
Set the create timestamp to seconds since epoch to allow for deterministic builds (defaults to current
time). By default, the created timestamp is changed and written into the image manifest with every
commit, causing the image's sha256 hash to be different even if the sources are exactly the same
otherwise. When --timestamp is set, the created timestamp is always set to the time specified and
therefore not changed, allowing the image's sha256 hash to remain the same. All files committed to the
layers of the image is created with the timestamp.

If the only instruction in a Containerfile is FROM, this flag has no effect.

--tls-verify
Require HTTPS and verify certificates when contacting registries (default: true). If explicitly set to
true, TLS verification is used. If set to false, TLS verification is not used. If not specified, TLS
verification is used unless the target registry is listed as an insecure registry in containers-
registries.conf(5)

--ulimit=type=soft-limit[:hard-limit]
Specifies resource limits to apply to processes launched when processing RUN instructions. This option
can be specified multiple times. Recognized resource types include:
"core": maximum core dump size (ulimit -c)
"cpu": maximum CPU time (ulimit -t)
"data": maximum size of a process's data segment (ulimit -d)
"fsize": maximum size of new files (ulimit -f)
"locks": maximum number of file locks (ulimit -x)
"memlock": maximum amount of locked memory (ulimit -l)
"msgqueue": maximum amount of data in message queues (ulimit -q)
"nice": niceness adjustment (nice -n, ulimit -e)
"nofile": maximum number of open files (ulimit -n)
"nproc": maximum number of processes (ulimit -u)
"rss": maximum size of a process's (ulimit -m)
"rtprio": maximum real-time scheduling priority (ulimit -r)
"rttime": maximum amount of real-time execution between blocking syscalls
"sigpending": maximum number of pending signals (ulimit -i)
"stack": maximum stack size (ulimit -s)

--unsetannotation=annotation
Unset the image annotation, causing the annotation not to be inherited from the base image.

--unsetenv=env
Unset environment variables from the final image.

--unsetlabel=label
Unset the image label, causing the label not to be inherited from the base image.

--userns=how
Sets the configuration for user namespaces when handling RUN instructions. The configured value can be
"" (the empty string) or "container" to indicate that a new user namespace is created, it can be "host"
to indicate that the user namespace in which podman itself is being run is reused, or it can be the path
to a user namespace which is already in use by another process.

--userns-gid-map=mapping
Directly specifies a GID mapping to be used to set ownership, at the filesystem level, on the working
container's contents. Commands run when handling RUN instructions defaults to being run in their own
user namespaces, configured using the UID and GID maps.

Entries in this map take the form of one or more triples of a starting in-container GID, a corresponding
starting host-level GID, and the number of consecutive IDs which the map entry represents.

This option overrides the remap-gids setting in the options section of /etc/containers/storage.conf.

If this option is not specified, but a global --userns-gid-map setting is supplied, settings from the
global option is used.

If none of --userns-uid-map-user, --userns-gid-map-group, or --userns-gid-map are specified, but
--userns-uid-map is specified, the GID map is set to use the same numeric values as the UID map.

--userns-gid-map-group=group
Specifies that a GID mapping to be used to set ownership, at the filesystem level, on the working
container's contents, can be found in entries in the /etc/subgid file which correspond to the specified
group. Commands run when handling RUN instructions defaults to being run in their own user namespaces,
configured using the UID and GID maps. If --userns-uid-map-user is specified, but --userns-gid-map-group
is not specified, podman assumes that the specified user name is also a suitable group name to use as the
default setting for this option.

NOTE: When this option is specified by a rootless user, the specified mappings are relative to the
rootless user namespace in the container, rather than being relative to the host as it is when run
rootful.

--userns-uid-map=mapping
Directly specifies a UID mapping to be used to set ownership, at the filesystem level, on the working
container's contents. Commands run when handling RUN instructions default to being run in their own user
namespaces, configured using the UID and GID maps.

Entries in this map take the form of one or more triples of a starting in-container UID, a corresponding
starting host-level UID, and the number of consecutive IDs which the map entry represents.

This option overrides the remap-uids setting in the options section of /etc/containers/storage.conf.

If this option is not specified, but a global --userns-uid-map setting is supplied, settings from the
global option is used.

If none of --userns-uid-map-user, --userns-gid-map-group, or --userns-uid-map are specified, but
--userns-gid-map is specified, the UID map is set to use the same numeric values as the GID map.

--userns-uid-map-user=user
Specifies that a UID mapping to be used to set ownership, at the filesystem level, on the working
container's contents, can be found in entries in the /etc/subuid file which correspond to the specified
user. Commands run when handling RUN instructions defaults to being run in their own user namespaces,
configured using the UID and GID maps. If --userns-gid-map-group is specified, but --userns-uid-map-user
is not specified, podman assumes that the specified group name is also a suitable user name to use as the
default setting for this option.

--uts=how
Sets the configuration for UTS namespaces when handling RUN instructions. The configured value can be ""
(the empty string) or "container" to indicate that a new UTS namespace to be created, or it can be "host"
to indicate that the UTS namespace in which podman itself is being run is reused, or it can be the path
to a UTS namespace which is already in use by another process.

--variant=variant
Set the architecture variant of the image to be built, and that of the base image to be pulled, if the
build uses one, to the provided value instead of using the architecture variant of the build host.

--volume, -v=[HOST-DIR:CONTAINER-DIR[:OPTIONS]]
Mount a host directory into containers when executing RUN instructions during the build.

The OPTIONS are a comma-separated list and can be one or more of:

• [rw|ro]

• [z|Z|O]

• [U]

• [[r]shared|[r]slave|[r]private][1] ⟨#Footnote1⟩

The CONTAINER-DIR must be an absolute path such as /src/docs. The HOST-DIR must be an absolute path as
well. Podman bind-mounts the HOST-DIR to the specified path when processing RUN instructions.

You can specify multiple -v options to mount one or more mounts.

You can add the :ro or :rw suffix to a volume to mount it read-only or read-write mode, respectively. By
default, the volumes are mounted read-write. See examples.

Chowning Volume Mounts

By default, Podman does not change the owner and group of source volume directories mounted. When running
using user namespaces, the UID and GID inside the namespace may correspond to another UID and GID on the
host.

The :U suffix tells Podman to use the correct host UID and GID based on the UID and GID within the
namespace, to change recursively the owner and group of the source volume.

Warning use with caution since this modifies the host filesystem.

Labeling Volume Mounts

Labeling systems like SELinux require that proper labels are placed on volume content mounted into a
container. Without a label, the security system might prevent the processes running inside the container
from using the content. By default, Podman does not change the labels set by the OS.

To change a label in the container context, add one of these two suffixes :z or :Z to the volume mount.
These suffixes tell Podman to relabel file objects on the shared volumes. The z option tells Podman that
two containers share the volume content. As a result, Podman labels the content with a shared content
label. Shared volume labels allow all containers to read/write content. The Z option tells Podman to
label the content with a private unshared label. Only the current container can use a private volume.

Note: Do not relabel system files and directories. Relabeling system content might cause other confined
services on the host machine to fail. For these types of containers, disabling SELinux separation is
recommended. The option --security-opt label=disable disables SELinux separation for the container. For
example, if a user wanted to volume mount their entire home directory into the build containers, they
need to disable SELinux separation.

$ podman build --security-opt label=disable -v $HOME:/home/user .

Overlay Volume Mounts

The :O flag tells Podman to mount the directory from the host as a temporary storage using the Overlay
file system. The RUN command containers are allowed to modify contents within the mountpoint and are
stored in the container storage in a separate directory. In Overlay FS terms the source directory is the
lower, and the container storage directory is the upper. Modifications to the mount point are destroyed
when the RUN command finishes executing, similar to a tmpfs mount point.

Any subsequent execution of RUN commands sees the original source directory content, any changes from
previous RUN commands no longer exists.

One use case of the overlay mount is sharing the package cache from the host into the container to allow
speeding up builds.

Note:

• Overlay mounts are not currently supported in rootless mode.

• The O flag is not allowed to be specified with the Z or z flags. Content mounted into the container is
labeled with the private label. On SELinux systems, labels in the source directory needs to be
readable by the container label. If not, SELinux container separation must be disabled for the
container to work.

• Modification of the directory volume mounted into the container with an overlay mount can cause
unexpected failures. Do not modify the directory until the container finishes running.

By default bind mounted volumes are private. That means any mounts done inside containers are not be
visible on the host and vice versa. This behavior can be changed by specifying a volume mount propagation
property.

When the mount propagation policy is set to shared, any mounts completed inside the container on that
volume is visible to both the host and container. When the mount propagation policy is set to slave, one
way mount propagation is enabled and any mounts completed on the host for that volume is visible only
inside of the container. To control the mount propagation property of volume use the :[r]shared,
:[r]slave or :[r]private propagation flag. For mount propagation to work on the source mount point (mount
point where source dir is mounted on) has to have the right propagation properties. For shared volumes,
the source mount point has to be shared. And for slave volumes, the source mount has to be either shared
or slave. [1] ⟨#Footnote1⟩

Use df <source-dir> to determine the source mount and then use findmnt -o TARGET,PROPAGATION <source-
mount-dir> to determine propagation properties of source mount, if findmnt utility is not available, the
source mount point can be determined by looking at the mount entry in /proc/self/mountinfo. Look at
optional fields and see if any propagation properties are specified. shared:X means the mount is shared,
master:X means the mount is slave and if nothing is there that means the mount is private. [1]
⟨#Footnote1⟩

To change propagation properties of a mount point use the mount command. For example, to bind mount the
source directory /foo do mount --bind /foo /foo and mount --make-private --make-shared /foo. This
converts /foo into a shared mount point. The propagation properties of the source mount can be changed
directly. For instance if / is the source mount for /foo, then use mount --make-shared / to convert /
into a shared mount.

EXAMPLES

Build an image using local Containerfiles
Build image using Containerfile with content from current directory:

$ podman build .

Build image using specified Containerfile with content from current directory:

$ podman build -f Containerfile.simple .

Build image using Containerfile from stdin with content from current directory:

$ cat $HOME/Containerfile | podman build -f - .

Build image using multiple Containerfiles with content from current directory:

$ podman build -f Containerfile.simple -f Containerfile.notsosimple .

Build image with specified Containerfile with content from $HOME directory. Note cpp is applied to
Containerfile.in before processing as Containerfile:

$ podman build -f Containerfile.in $HOME

Build image with the specified tag with Containerfile and content from current directory:

$ podman build -t imageName .

Build image ignoring registry verification for any images pulled via the Containerfile:

$ podman build --tls-verify=false -t imageName .

Build image with the specified logging format:

$ podman build --runtime-flag log-format=json .

Build image using debug mode for logging:

$ podman build --runtime-flag debug .

Build image using specified registry attributes when pulling images from the selected Containerfile:

$ podman build --authfile /tmp/auths/myauths.json --cert-dir $HOME/auth --tls-verify=true --creds=username:password -t imageName -f Containerfile.simple .

Build image using specified resource controls when running containers during the build:

$ podman build --memory 40m --cpu-period 10000 --cpu-quota 50000 --ulimit nofile=1024:1028 -t imageName .

Build image using specified SELinux labels and cgroup config running containers during the build:

$ podman build --security-opt label=level:s0:c100,c200 --cgroup-parent /path/to/cgroup/parent -t imageName .

Build image with read-only and SELinux relabeled volume mounted from the host into running containers
during the build:

$ podman build --volume /home/test:/myvol:ro,Z -t imageName .

Build image with overlay volume mounted from the host into running containers during the build:

$ podman build -v /var/lib/yum:/var/lib/yum:O -t imageName .

Build image using layers and then removing intermediate containers even if the build fails.

$ podman build --layers --force-rm -t imageName .

Build image ignoring cache and not removing intermediate containers even if the build succeeds:

$ podman build --no-cache --rm=false -t imageName .

Build image using the specified network when running containers during the build:

$ podman build --network mynet .

Build an image using a secret stored in an environment variable or file named mysecret to be used with
the instruction RUN --mount=type=secret,id=mysecret cat /run/secrets/mysecret:

$ podman build --secret=id=mysecret .

Build an image using a secret stored in an environment variable named MYSECRET to be used with the
instruction RUN --mount=type=secret,id=mysecret cat /run/secrets/mysecret:

$ podman build --secret=id=mysecret,env=MYSECRET .
$ podman build --secret=id=mysecret,src=MYSECRET,type=env .

Build an image using a secret stored in a file named .mysecret to be used with the instruction RUN
--mount=type=secret,id=mysecret cat /run/secrets/mysecret:

$ podman build --secret=id=mysecret,src=.mysecret .
$ podman build --secret=id=mysecret,src=.mysecret,type=file .

Building a multi-architecture image using the --manifest option (requires emulation software)
Build image using the specified architectures and link to a single manifest on successful completion:

$ podman build --arch arm --manifest myimage /tmp/mysrc
$ podman build --arch amd64 --manifest myimage /tmp/mysrc
$ podman build --arch s390x --manifest myimage /tmp/mysrc

Similarly build using a single command

$ podman build --platform linux/s390x,linux/ppc64le,linux/amd64 --manifest myimage /tmp/mysrc

Build image using multiple specified architectures and link to single manifest on successful completion:

$ podman build --platform linux/arm64 --platform linux/amd64 --manifest myimage /tmp/mysrc

Building an image using a URL, Git repo, or archive
The build context directory can be specified as a URL to a Containerfile, a Git repository, or URL to an
archive. If the URL is a Containerfile, it is downloaded to a temporary location and used as the context.
When a Git repository is set as the URL, the repository is cloned locally to a temporary location and
then used as the context. Lastly, if the URL is an archive, it is downloaded to a temporary location and
extracted before being used as the context.

Building an image using a URL to a Containerfile
Build image from Containerfile downloaded into temporary location used as the build context:

$ podman build https://10.10.10.1/podman/Containerfile

Building an image using a Git repository
Podman clones the specified GitHub repository to a temporary location and uses it as the context. The
Containerfile at the root of the repository is used and it only works if the GitHub repository is a
dedicated repository.

Build image from specified git repository downloaded into temporary location used as the build context:

$ podman build -t hello https://github.com/containers/PodmanHello.git
$ podman run hello

Note: GitHub does not support using git:// for performing clone operation due to recent changes in their
security guidance (https://github.blog/2021-09-01-improving-git-protocol-security-github/). Use an
https:// URL if the source repository is hosted on GitHub.

Building an image using a URL to an archive
Podman fetches the archive file, decompresses it, and uses its contents as the build context. The
Containerfile at the root of the archive and the rest of the archive are used as the context of the
build. Passing the -f PATH/Containerfile option as well tells the system to look for that file inside the
contents of the archive.

$ podman build -f dev/Containerfile https://10.10.10.1/podman/context.tar.gz

Note: supported compression formats are 'xz', 'bzip2', 'gzip' and 'identity' (no compression).

Files

.containerignore/.dockerignore
If the file .containerignore or .dockerignore exists in the context directory, podman build reads its
contents. Use the --ignorefile option to override the .containerignore path location. Podman uses the
content to exclude files and directories from the context directory, when executing COPY and ADD
directives in the Containerfile/Dockerfile

The .containerignore and .dockerignore files use the same syntax; if both are in the context directory,
podman build only uses .containerignore.

Users can specify a series of Unix shell globs in a .containerignore file to identify files/directories
to exclude.

Podman supports a special wildcard string ** which matches any number of directories (including zero).
For example, */.go excludes all files that end with .go that are found in all directories.

Example .containerignore file:

# exclude this content for image
*/*.c
**/output*
src

*/*.c Excludes files and directories whose names ends with .c in any top level subdirectory. For example,
the source file include/rootless.c.

**/output* Excludes files and directories starting with output from any directory.

src Excludes files named src and the directory src as well as any content in it.

Lines starting with ! (exclamation mark) can be used to make exceptions to exclusions. The following is
an example .containerignore file that uses this mechanism:

*.doc
!Help.doc

Exclude all doc files except Help.doc from the image.

This functionality is compatible with the handling of .containerignore files described here:
containerignore(5)

registries.conf (/etc/containers/registries.conf)
registries.conf is the configuration file which specifies which container registries is consulted when
completing image names which do not include a registry or domain portion. See containers-
registries.conf(5)

Troubleshooting

   lastlog sparse file
       Using  a  useradd  command  within  a  Containerfile  with  a  large  UID/GID creates a large sparse file
       /var/log/lastlog.  This can cause the build to hang forever.  Go language does not support  sparse  files
       correctly, which can lead to some huge files being created in the container image.

       When  using  the  useradd  command  within  the  build script, pass the --no-log-init or -l option to the
       useradd command.  This option tells useradd to stop creating the lastlog file.

HISTORY

       Aug 2020, Additional options and .containerignore added by Dan Walsh <dwalsh@redhat.com>

       May 2018, Minor revisions added by Joe Doss <joe@solidadmin.com>

       December 2017, Originally compiled by Tom Sweeney <tsweeney@redhat.com>

FOOTNOTES

       1:  The  Podman  project  is  committed to inclusivity, a core value of open source. The master and slave
       mount propagation terminology used here is problematic and divisive, and needs to be  changed.   However,
       these  terms  are  currently  used  within the Linux kernel and must be used as-is at this time. When the
       kernel maintainers rectify this usage, Podman will follow suit immediately.

                                                                                                 podman-build(1)

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

EXAMPLES

Files

Troubleshooting

SEE ALSO

HISTORY

FOOTNOTES