Provided by: manpages-dev_3.54-1ubuntu1_all 
NAME
send, sendto, sendmsg - send a message on a socket
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
ssize_t send(int sockfd, const void *buf, size_t len, int flags);
ssize_t sendto(int sockfd, const void *buf, size_t len, int flags,
const struct sockaddr *dest_addr, socklen_t addrlen);
ssize_t sendmsg(int sockfd, const struct msghdr *msg, int flags);
DESCRIPTION
The system calls send(), sendto(), and sendmsg() are used to transmit a message to another
socket.
The send() call may be used only when the socket is in a connected state (so that the
intended recipient is known). The only difference between send() and write(2) is the
presence of flags. With a zero flags argument, send() is equivalent to write(2). Also,
the following call
send(sockfd, buf, len, flags);
is equivalent to
sendto(sockfd, buf, len, flags, NULL, 0);
The argument sockfd is the file descriptor of the sending socket.
If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET) socket, the
arguments dest_addr and addrlen are ignored (and the error EISCONN may be returned when
they are not NULL and 0), and the error ENOTCONN is returned when the socket was not
actually connected. Otherwise, the address of the target is given by dest_addr with
addrlen specifying its size. For sendmsg(), the address of the target is given by
msg.msg_name, with msg.msg_namelen specifying its size.
For send() and sendto(), the message is found in buf and has length len. For sendmsg(),
the message is pointed to by the elements of the array msg.msg_iov. The sendmsg() call
also allows sending ancillary data (also known as control information).
If the message is too long to pass atomically through the underlying protocol, the error
EMSGSIZE is returned, and the message is not transmitted.
No indication of failure to deliver is implicit in a send(). Locally detected errors are
indicated by a return value of -1.
When the message does not fit into the send buffer of the socket, send() normally blocks,
unless the socket has been placed in nonblocking I/O mode. In nonblocking mode it would
fail with the error EAGAIN or EWOULDBLOCK in this case. The select(2) call may be used to
determine when it is possible to send more data.
The flags argument is the bitwise OR of zero or more of the following flags.
MSG_CONFIRM (Since Linux 2.3.15)
Tell the link layer that forward progress happened: you got a successful reply from
the other side. If the link layer doesn't get this it will regularly reprobe the
neighbor (e.g., via a unicast ARP). Only valid on SOCK_DGRAM and SOCK_RAW sockets
and currently implemented only for IPv4 and IPv6. See arp(7) for details.
MSG_DONTROUTE
Don't use a gateway to send out the packet, send to hosts only on directly
connected networks. This is usually used only by diagnostic or routing programs.
This is defined only for protocol families that route; packet sockets don't.
MSG_DONTWAIT (since Linux 2.2)
Enables nonblocking operation; if the operation would block, EAGAIN or EWOULDBLOCK
is returned (this can also be enabled using the O_NONBLOCK flag with the F_SETFL
fcntl(2)).
MSG_EOR (since Linux 2.2)
Terminates a record (when this notion is supported, as for sockets of type
SOCK_SEQPACKET).
MSG_MORE (Since Linux 2.4.4)
The caller has more data to send. This flag is used with TCP sockets to obtain the
same effect as the TCP_CORK socket option (see tcp(7)), with the difference that
this flag can be set on a per-call basis.
Since Linux 2.6, this flag is also supported for UDP sockets, and informs the
kernel to package all of the data sent in calls with this flag set into a single
datagram which is transmitted only when a call is performed that does not specify
this flag. (See also the UDP_CORK socket option described in udp(7).)
MSG_NOSIGNAL (since Linux 2.2)
Requests not to send SIGPIPE on errors on stream oriented sockets when the other
end breaks the connection. The EPIPE error is still returned.
MSG_OOB
Sends out-of-band data on sockets that support this notion (e.g., of type
SOCK_STREAM); the underlying protocol must also support out-of-band data.
The definition of the msghdr structure follows. See recv(2) and below for an exact
description of its fields.
struct msghdr {
void *msg_name; /* optional address */
socklen_t msg_namelen; /* size of address */
struct iovec *msg_iov; /* scatter/gather array */
size_t msg_iovlen; /* # elements in msg_iov */
void *msg_control; /* ancillary data, see below */
size_t msg_controllen; /* ancillary data buffer len */
int msg_flags; /* flags on received message */
};
You may send control information using the msg_control and msg_controllen members. The
maximum control buffer length the kernel can process is limited per socket by the value in
/proc/sys/net/core/optmem_max; see socket(7).
RETURN VALUE
On success, these calls return the number of characters sent. On error, -1 is returned,
and errno is set appropriately.
ERRORS
These are some standard errors generated by the socket layer. Additional errors may be
generated and returned from the underlying protocol modules; see their respective manual
pages.
EACCES (For UNIX domain sockets, which are identified by pathname) Write permission is
denied on the destination socket file, or search permission is denied for one of
the directories the path prefix. (See path_resolution(7).)
(For UDP sockets) An attempt was made to send to a network/broadcast address as
though it was a unicast address.
EAGAIN or EWOULDBLOCK
The socket is marked nonblocking and the requested operation would block.
POSIX.1-2001 allows either error to be returned for this case, and does not require
these constants to have the same value, so a portable application should check for
both possibilities.
EBADF An invalid descriptor was specified.
ECONNRESET
Connection reset by peer.
EDESTADDRREQ
The socket is not connection-mode, and no peer address is set.
EFAULT An invalid user space address was specified for an argument.
EINTR A signal occurred before any data was transmitted; see signal(7).
EINVAL Invalid argument passed.
EISCONN
The connection-mode socket was connected already but a recipient was specified.
(Now either this error is returned, or the recipient specification is ignored.)
EMSGSIZE
The socket type requires that message be sent atomically, and the size of the
message to be sent made this impossible.
ENOBUFS
The output queue for a network interface was full. This generally indicates that
the interface has stopped sending, but may be caused by transient congestion.
(Normally, this does not occur in Linux. Packets are just silently dropped when a
device queue overflows.)
ENOMEM No memory available.
ENOTCONN
The socket is not connected, and no target has been given.
ENOTSOCK
The argument sockfd is not a socket.
EOPNOTSUPP
Some bit in the flags argument is inappropriate for the socket type.
EPIPE The local end has been shut down on a connection oriented socket. In this case the
process will also receive a SIGPIPE unless MSG_NOSIGNAL is set.
CONFORMING TO
4.4BSD, SVr4, POSIX.1-2001. These function calls appeared in 4.2BSD.
POSIX.1-2001 describes only the MSG_OOB and MSG_EOR flags. POSIX.1-2008 adds a
specification of MSG_NOSIGNAL. The MSG_CONFIRM flag is a Linux extension.
NOTES
The prototypes given above follow the Single UNIX Specification, as glibc2 also does; the
flags argument was int in 4.x BSD, but unsigned int in libc4 and libc5; the len argument
was int in 4.x BSD and libc4, but size_t in libc5; the addrlen argument was int in 4.x BSD
and libc4 and libc5. See also accept(2).
According to POSIX.1-2001, the msg_controllen field of the msghdr structure should be
typed as socklen_t, but glibc currently types it as size_t.
See sendmmsg(2) for information about a Linux-specific system call that can be used to
transmit multiple datagrams in a single call.
BUGS
Linux may return EPIPE instead of ENOTCONN.
EXAMPLE
An example of the use of sendto() is shown in getaddrinfo(3).
SEE ALSO
fcntl(2), getsockopt(2), recv(2), select(2), sendfile(2), sendmmsg(2), shutdown(2),
socket(2), write(2), cmsg(3), ip(7), socket(7), tcp(7), udp(7)
COLOPHON
This page is part of release 3.54 of the Linux man-pages project. A description of the
project, and information about reporting bugs, can be found at
http://www.kernel.org/doc/man-pages/.