Provided by: libio-aio-perl_4.18-1_amd64 
NAME
IO::AIO - Asynchronous Input/Output
SYNOPSIS
use IO::AIO;
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "/etc/passwd: $!";
...
};
aio_unlink "/tmp/file", sub { };
aio_read $fh, 30000, 1024, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
};
# version 2+ has request and group objects
use IO::AIO 2;
aioreq_pri 4; # give next request a very high priority
my $req = aio_unlink "/tmp/file", sub { };
$req->cancel; # cancel request if still in queue
my $grp = aio_group sub { print "all stats done\n" };
add $grp aio_stat "..." for ...;
DESCRIPTION
This module implements asynchronous I/O using whatever means your operating system
supports. It is implemented as an interface to "libeio"
(<http://software.schmorp.de/pkg/libeio.html>).
Asynchronous means that operations that can normally block your program (e.g. reading from
disk) will be done asynchronously: the operation will still block, but you can do
something else in the meantime. This is extremely useful for programs that need to stay
interactive even when doing heavy I/O (GUI programs, high performance network servers
etc.), but can also be used to easily do operations in parallel that are normally done
sequentially, e.g. stat'ing many files, which is much faster on a RAID volume or over NFS
when you do a number of stat operations concurrently.
While most of this works on all types of file descriptors (for example sockets), using
these functions on file descriptors that support nonblocking operation (again, sockets,
pipes etc.) is very inefficient. Use an event loop for that (such as the EV module):
IO::AIO will naturally fit into such an event loop itself.
In this version, a number of threads are started that execute your requests and signal
their completion. You don't need thread support in perl, and the threads created by this
module will not be visible to perl. In the future, this module might make use of the
native aio functions available on many operating systems. However, they are often not
well-supported or restricted (GNU/Linux doesn't allow them on normal files currently, for
example), and they would only support aio_read and aio_write, so the remaining
functionality would have to be implemented using threads anyway.
Although the module will work in the presence of other (Perl-) threads, it is currently
not reentrant in any way, so use appropriate locking yourself, always call "poll_cb" from
within the same thread, or never call "poll_cb" (or other "aio_" functions) recursively.
EXAMPLE
This is a simple example that uses the EV module and loads /etc/passwd asynchronously:
use Fcntl;
use EV;
use IO::AIO;
# register the IO::AIO callback with EV
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# queue the request to open /etc/passwd
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "error while opening: $!";
# stat'ing filehandles is generally non-blocking
my $size = -s $fh;
# queue a request to read the file
my $contents;
aio_read $fh, 0, $size, $contents, 0, sub {
$_[0] == $size
or die "short read: $!";
close $fh;
# file contents now in $contents
print $contents;
# exit event loop and program
EV::unloop;
};
};
# possibly queue up other requests, or open GUI windows,
# check for sockets etc. etc.
# process events as long as there are some:
EV::loop;
REQUEST ANATOMY AND LIFETIME
Every "aio_*" function creates a request. which is a C data structure not directly visible
to Perl.
If called in non-void context, every request function returns a Perl object representing
the request. In void context, nothing is returned, which saves a bit of memory.
The perl object is a fairly standard ref-to-hash object. The hash contents are not used by
IO::AIO so you are free to store anything you like in it.
During their existance, aio requests travel through the following states, in order:
ready
Immediately after a request is created it is put into the ready state, waiting for a
thread to execute it.
execute
A thread has accepted the request for processing and is currently executing it (e.g.
blocking in read).
pending
The request has been executed and is waiting for result processing.
While request submission and execution is fully asynchronous, result processing is not
and relies on the perl interpreter calling "poll_cb" (or another function with the
same effect).
result
The request results are processed synchronously by "poll_cb".
The "poll_cb" function will process all outstanding aio requests by calling their
callbacks, freeing memory associated with them and managing any groups they are
contained in.
done
Request has reached the end of its lifetime and holds no resources anymore (except
possibly for the Perl object, but its connection to the actual aio request is severed
and calling its methods will either do nothing or result in a runtime error).
FUNCTIONS
QUICK OVERVIEW
This section simply lists the prototypes most of the functions for quick reference. See
the following sections for function-by-function documentation.
aio_wd $pathname, $callback->($wd)
aio_open $pathname, $flags, $mode, $callback->($fh)
aio_close $fh, $callback->($status)
aio_seek $fh,$offset,$whence, $callback->($offs)
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
aio_readahead $fh,$offset,$length, $callback->($retval)
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
aio_statvfs $fh_or_path, $callback->($statvfs)
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
aio_chmod $fh_or_path, $mode, $callback->($status)
aio_truncate $fh_or_path, $offset, $callback->($status)
aio_allocate $fh, $mode, $offset, $len, $callback->($status)
aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
aio_unlink $pathname, $callback->($status)
aio_mknod $pathname, $mode, $dev, $callback->($status)
aio_link $srcpath, $dstpath, $callback->($status)
aio_symlink $srcpath, $dstpath, $callback->($status)
aio_readlink $pathname, $callback->($link)
aio_realpath $pathname, $callback->($link)
aio_rename $srcpath, $dstpath, $callback->($status)
aio_mkdir $pathname, $mode, $callback->($status)
aio_rmdir $pathname, $callback->($status)
aio_readdir $pathname, $callback->($entries)
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
aio_load $pathname, $data, $callback->($status)
aio_copy $srcpath, $dstpath, $callback->($status)
aio_move $srcpath, $dstpath, $callback->($status)
aio_rmtree $pathname, $callback->($status)
aio_sync $callback->($status)
aio_syncfs $fh, $callback->($status)
aio_fsync $fh, $callback->($status)
aio_fdatasync $fh, $callback->($status)
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
aio_pathsync $pathname, $callback->($status)
aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
aio_mlockall $flags, $callback->($status)
aio_group $callback->(...)
aio_nop $callback->()
$prev_pri = aioreq_pri [$pri]
aioreq_nice $pri_adjust
IO::AIO::poll_wait
IO::AIO::poll_cb
IO::AIO::poll
IO::AIO::flush
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
IO::AIO::min_parallel $nthreads
IO::AIO::max_parallel $nthreads
IO::AIO::max_idle $nthreads
IO::AIO::idle_timeout $seconds
IO::AIO::max_outstanding $maxreqs
IO::AIO::nreqs
IO::AIO::nready
IO::AIO::npending
IO::AIO::sendfile $ofh, $ifh, $offset, $count
IO::AIO::fadvise $fh, $offset, $len, $advice
IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
IO::AIO::munmap $scalar
IO::AIO::madvise $scalar, $offset, $length, $advice
IO::AIO::mprotect $scalar, $offset, $length, $protect
IO::AIO::munlock $scalar, $offset = 0, $length = undef
IO::AIO::munlockall
API NOTES
All the "aio_*" calls are more or less thin wrappers around the syscall with the same name
(sans "aio_"). The arguments are similar or identical, and they all accept an additional
(and optional) $callback argument which must be a code reference. This code reference will
be called after the syscall has been executed in an asynchronous fashion. The results of
the request will be passed as arguments to the callback (and, if an error occured, in $!)
- for most requests the syscall return code (e.g. most syscalls return "-1" on error,
unlike perl, which usually delivers "false").
Some requests (such as "aio_readdir") pass the actual results and communicate failures by
passing "undef".
All functions expecting a filehandle keep a copy of the filehandle internally until the
request has finished.
All functions return request objects of type IO::AIO::REQ that allow further manipulation
of those requests while they are in-flight.
The pathnames you pass to these routines should be absolute. The reason for this is that
at the time the request is being executed, the current working directory could have
changed. Alternatively, you can make sure that you never change the current working
directory anywhere in the program and then use relative paths. You can also take advantage
of IO::AIOs working directory abstraction, that lets you specify paths relative to some
previously-opened "working directory object" - see the description of the "IO::AIO::WD"
class later in this document.
To encode pathnames as octets, either make sure you either: a) always pass in filenames
you got from outside (command line, readdir etc.) without tinkering, b) are in your native
filesystem encoding, c) use the Encode module and encode your pathnames to the locale (or
other) encoding in effect in the user environment, d) use Glib::filename_from_unicode on
unicode filenames or e) use something else to ensure your scalar has the correct contents.
This works, btw. independent of the internal UTF-8 bit, which IO::AIO handles correctly
whether it is set or not.
AIO REQUEST FUNCTIONS
$prev_pri = aioreq_pri [$pri]
Returns the priority value that would be used for the next request and, if $pri is
given, sets the priority for the next aio request.
The default priority is 0, the minimum and maximum priorities are "-4" and 4,
respectively. Requests with higher priority will be serviced first.
The priority will be reset to 0 after each call to one of the "aio_*" functions.
Example: open a file with low priority, then read something from it with higher
priority so the read request is serviced before other low priority open requests
(potentially spamming the cache):
aioreq_pri -3;
aio_open ..., sub {
return unless $_[0];
aioreq_pri -2;
aio_read $_[0], ..., sub {
...
};
};
aioreq_nice $pri_adjust
Similar to "aioreq_pri", but subtracts the given value from the current priority, so
the effect is cumulative.
aio_open $pathname, $flags, $mode, $callback->($fh)
Asynchronously open or create a file and call the callback with a newly created
filehandle for the file (or "undef" in case of an error).
The pathname passed to "aio_open" must be absolute. See API NOTES, above, for an
explanation.
The $flags argument is a bitmask. See the "Fcntl" module for a list. They are the same
as used by "sysopen".
Likewise, $mode specifies the mode of the newly created file, if it didn't exist and
"O_CREAT" has been given, just like perl's "sysopen", except that it is mandatory
(i.e. use 0 if you don't create new files, and 0666 or 0777 if you do). Note that the
$mode will be modified by the umask in effect then the request is being executed, so
better never change the umask.
Example:
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
if ($_[0]) {
print "open successful, fh is $_[0]\n";
...
} else {
die "open failed: $!\n";
}
};
In addition to all the common open modes/flags ("O_RDONLY", "O_WRONLY", "O_RDWR",
"O_CREAT", "O_TRUNC", "O_EXCL" and "O_APPEND"), the following POSIX and non-POSIX
constants are available (missing ones on your system are, as usual, 0):
"O_ASYNC", "O_DIRECT", "O_NOATIME", "O_CLOEXEC", "O_NOCTTY", "O_NOFOLLOW",
"O_NONBLOCK", "O_EXEC", "O_SEARCH", "O_DIRECTORY", "O_DSYNC", "O_RSYNC", "O_SYNC" and
"O_TTY_INIT".
aio_close $fh, $callback->($status)
Asynchronously close a file and call the callback with the result code.
Unfortunately, you can't do this to perl. Perl insists very strongly on closing the
file descriptor associated with the filehandle itself.
Therefore, "aio_close" will not close the filehandle - instead it will use dup2 to
overwrite the file descriptor with the write-end of a pipe (the pipe fd will be
created on demand and will be cached).
Or in other words: the file descriptor will be closed, but it will not be free for
reuse until the perl filehandle is closed.
aio_seek $fh, $offset, $whence, $callback->($offs)
Seeks the filehandle to the new $offset, similarly to perl's "sysseek". The $whence
can use the traditional values (0 for "IO::AIO::SEEK_SET", 1 for "IO::AIO::SEEK_CUR"
or 2 for "IO::AIO::SEEK_END").
The resulting absolute offset will be passed to the callback, or "-1" in case of an
error.
In theory, the $whence constants could be different than the corresponding values from
Fcntl, but perl guarantees they are the same, so don't panic.
As a GNU/Linux (and maybe Solaris) extension, also the constants "IO::AIO::SEEK_DATA"
and "IO::AIO::SEEK_HOLE" are available, if they could be found. No guarantees about
suitability for use in "aio_seek" or Perl's "sysseek" can be made though, although I
would naively assume they "just work".
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
Reads or writes $length bytes from or to the specified $fh and $offset into the scalar
given by $data and offset $dataoffset and calls the callback without the actual number
of bytes read (or -1 on error, just like the syscall).
"aio_read" will, like "sysread", shrink or grow the $data scalar to offset plus the
actual number of bytes read.
If $offset is undefined, then the current file descriptor offset will be used (and
updated), otherwise the file descriptor offset will not be changed by these calls.
If $length is undefined in "aio_write", use the remaining length of $data.
If $dataoffset is less than zero, it will be counted from the end of $data.
The $data scalar MUST NOT be modified in any way while the request is outstanding.
Modifying it can result in segfaults or World War III (if the necessary/optional
hardware is installed).
Example: Read 15 bytes at offset 7 into scalar $buffer, starting at offset 0 within
the scalar:
aio_read $fh, 7, 15, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
print "read $_[0] bytes: <$buffer>\n";
};
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
Tries to copy $length bytes from $in_fh to $out_fh. It starts reading at byte offset
$in_offset, and starts writing at the current file offset of $out_fh. Because of that,
it is not safe to issue more than one "aio_sendfile" per $out_fh, as they will
interfere with each other. The same $in_fh works fine though, as this function does
not move or use the file offset of $in_fh.
Please note that "aio_sendfile" can read more bytes from $in_fh than are written, and
there is no way to find out how many more bytes have been read from "aio_sendfile"
alone, as "aio_sendfile" only provides the number of bytes written to $out_fh. Only if
the result value equals $length one can assume that $length bytes have been read.
Unlike with other "aio_" functions, it makes a lot of sense to use "aio_sendfile" on
non-blocking sockets, as long as one end (typically the $in_fh) is a file - the file
I/O will then be asynchronous, while the socket I/O will be non-blocking. Note,
however, that you can run into a trap where "aio_sendfile" reads some data with
readahead, then fails to write all data, and when the socket is ready the next time,
the data in the cache is already lost, forcing "aio_sendfile" to again hit the disk.
Explicit "aio_read" + "aio_write" let's you better control resource usage.
This call tries to make use of a native "sendfile"-like syscall to provide zero-copy
operation. For this to work, $out_fh should refer to a socket, and $in_fh should refer
to an mmap'able file.
If a native sendfile cannot be found or it fails with "ENOSYS", "EINVAL", "ENOTSUP",
"EOPNOTSUPP", "EAFNOSUPPORT", "EPROTOTYPE" or "ENOTSOCK", it will be emulated, so you
can call "aio_sendfile" on any type of filehandle regardless of the limitations of the
operating system.
As native sendfile syscalls (as practically any non-POSIX interface hacked together in
a hurry to improve benchmark numbers) tend to be rather buggy on many systems, this
implementation tries to work around some known bugs in Linux and FreeBSD kernels
(probably others, too), but that might fail, so you really really should check the
return value of "aio_sendfile" - fewre bytes than expected might have been
transferred.
aio_readahead $fh,$offset,$length, $callback->($retval)
"aio_readahead" populates the page cache with data from a file so that subsequent
reads from that file will not block on disk I/O. The $offset argument specifies the
starting point from which data is to be read and $length specifies the number of bytes
to be read. I/O is performed in whole pages, so that offset is effectively rounded
down to a page boundary and bytes are read up to the next page boundary greater than
or equal to (off-set+length). "aio_readahead" does not read beyond the end of the
file. The current file offset of the file is left unchanged.
If that syscall doesn't exist (likely if your OS isn't Linux) it will be emulated by
simply reading the data, which would have a similar effect.
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
Works like perl's "stat" or "lstat" in void context. The callback will be called after
the stat and the results will be available using "stat _" or "-s _" etc...
The pathname passed to "aio_stat" must be absolute. See API NOTES, above, for an
explanation.
Currently, the stats are always 64-bit-stats, i.e. instead of returning an error when
stat'ing a large file, the results will be silently truncated unless perl itself is
compiled with large file support.
To help interpret the mode and dev/rdev stat values, IO::AIO offers the following
constants and functions (if not implemented, the constants will be 0 and the functions
will either "croak" or fall back on traditional behaviour).
"S_IFMT", "S_IFIFO", "S_IFCHR", "S_IFBLK", "S_IFLNK", "S_IFREG", "S_IFDIR", "S_IFWHT",
"S_IFSOCK", "IO::AIO::major $dev_t", "IO::AIO::minor $dev_t", "IO::AIO::makedev
$major, $minor".
Example: Print the length of /etc/passwd:
aio_stat "/etc/passwd", sub {
$_[0] and die "stat failed: $!";
print "size is ", -s _, "\n";
};
aio_statvfs $fh_or_path, $callback->($statvfs)
Works like the POSIX "statvfs" or "fstatvfs" syscalls, depending on whether a file
handle or path was passed.
On success, the callback is passed a hash reference with the following members:
"bsize", "frsize", "blocks", "bfree", "bavail", "files", "ffree", "favail", "fsid",
"flag" and "namemax". On failure, "undef" is passed.
The following POSIX IO::AIO::ST_* constants are defined: "ST_RDONLY" and "ST_NOSUID".
The following non-POSIX IO::AIO::ST_* flag masks are defined to their correct value
when available, or to 0 on systems that do not support them: "ST_NODEV", "ST_NOEXEC",
"ST_SYNCHRONOUS", "ST_MANDLOCK", "ST_WRITE", "ST_APPEND", "ST_IMMUTABLE",
"ST_NOATIME", "ST_NODIRATIME" and "ST_RELATIME".
Example: stat "/wd" and dump out the data if successful.
aio_statvfs "/wd", sub {
my $f = $_[0]
or die "statvfs: $!";
use Data::Dumper;
say Dumper $f;
};
# result:
{
bsize => 1024,
bfree => 4333064312,
blocks => 10253828096,
files => 2050765568,
flag => 4096,
favail => 2042092649,
bavail => 4333064312,
ffree => 2042092649,
namemax => 255,
frsize => 1024,
fsid => 1810
}
Here is a (likely partial) list of fsid values used by Linux - it is safe to hardcode
these when the $^O is "linux":
0x0000adf5 adfs
0x0000adff affs
0x5346414f afs
0x09041934 anon-inode filesystem
0x00000187 autofs
0x42465331 befs
0x1badface bfs
0x42494e4d binfmt_misc
0x9123683e btrfs
0x0027e0eb cgroupfs
0xff534d42 cifs
0x73757245 coda
0x012ff7b7 coh
0x28cd3d45 cramfs
0x453dcd28 cramfs-wend (wrong endianness)
0x64626720 debugfs
0x00001373 devfs
0x00001cd1 devpts
0x0000f15f ecryptfs
0x00414a53 efs
0x0000137d ext
0x0000ef53 ext2/ext3
0x0000ef51 ext2
0x00004006 fat
0x65735546 fuseblk
0x65735543 fusectl
0x0bad1dea futexfs
0x01161970 gfs2
0x47504653 gpfs
0x00004244 hfs
0xf995e849 hpfs
0x958458f6 hugetlbfs
0x2bad1dea inotifyfs
0x00009660 isofs
0x000072b6 jffs2
0x3153464a jfs
0x6b414653 k-afs
0x0bd00bd0 lustre
0x0000137f minix
0x0000138f minix 30 char names
0x00002468 minix v2
0x00002478 minix v2 30 char names
0x00004d5a minix v3
0x19800202 mqueue
0x00004d44 msdos
0x0000564c novell
0x00006969 nfs
0x6e667364 nfsd
0x00003434 nilfs
0x5346544e ntfs
0x00009fa1 openprom
0x7461636F ocfs2
0x00009fa0 proc
0x6165676c pstorefs
0x0000002f qnx4
0x858458f6 ramfs
0x52654973 reiserfs
0x00007275 romfs
0x67596969 rpc_pipefs
0x73636673 securityfs
0xf97cff8c selinux
0x0000517b smb
0x534f434b sockfs
0x73717368 squashfs
0x62656572 sysfs
0x012ff7b6 sysv2
0x012ff7b5 sysv4
0x01021994 tmpfs
0x15013346 udf
0x00011954 ufs
0x54190100 ufs byteswapped
0x00009fa2 usbdevfs
0x01021997 v9fs
0xa501fcf5 vxfs
0xabba1974 xenfs
0x012ff7b4 xenix
0x58465342 xfs
0x012fd16d xia
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
Works like perl's "utime" function (including the special case of $atime and $mtime
being undef). Fractional times are supported if the underlying syscalls support them.
When called with a pathname, uses utimes(2) if available, otherwise utime(2). If
called on a file descriptor, uses futimes(2) if available, otherwise returns ENOSYS,
so this is not portable.
Examples:
# set atime and mtime to current time (basically touch(1)):
aio_utime "path", undef, undef;
# set atime to current time and mtime to beginning of the epoch:
aio_utime "path", time, undef; # undef==0
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
Works like perl's "chown" function, except that "undef" for either $uid or $gid is
being interpreted as "do not change" (but -1 can also be used).
Examples:
# same as "chown root path" in the shell:
aio_chown "path", 0, -1;
# same as above:
aio_chown "path", 0, undef;
aio_truncate $fh_or_path, $offset, $callback->($status)
Works like truncate(2) or ftruncate(2).
aio_allocate $fh, $mode, $offset, $len, $callback->($status)
Allocates or freed disk space according to the $mode argument. See the linux
"fallocate" docuemntation for details.
$mode can currently be 0 or "IO::AIO::FALLOC_FL_KEEP_SIZE" to allocate space, or
"IO::AIO::FALLOC_FL_PUNCH_HOLE | IO::AIO::FALLOC_FL_KEEP_SIZE", to deallocate a file
range.
The file system block size used by "fallocate" is presumably the "f_bsize" returned by
"statvfs".
If "fallocate" isn't available or cannot be emulated (currently no emulation will be
attempted), passes "-1" and sets $! to "ENOSYS".
aio_chmod $fh_or_path, $mode, $callback->($status)
Works like perl's "chmod" function.
aio_unlink $pathname, $callback->($status)
Asynchronously unlink (delete) a file and call the callback with the result code.
aio_mknod $pathname, $mode, $dev, $callback->($status)
[EXPERIMENTAL]
Asynchronously create a device node (or fifo). See mknod(2).
The only (POSIX-) portable way of calling this function is:
aio_mknod $pathname, IO::AIO::S_IFIFO | $mode, 0, sub { ...
See "aio_stat" for info about some potentially helpful extra constants and functions.
aio_link $srcpath, $dstpath, $callback->($status)
Asynchronously create a new link to the existing object at $srcpath at the path
$dstpath and call the callback with the result code.
aio_symlink $srcpath, $dstpath, $callback->($status)
Asynchronously create a new symbolic link to the existing object at $srcpath at the
path $dstpath and call the callback with the result code.
aio_readlink $pathname, $callback->($link)
Asynchronously read the symlink specified by $path and pass it to the callback. If an
error occurs, nothing or undef gets passed to the callback.
aio_realpath $pathname, $callback->($path)
Asynchronously make the path absolute and resolve any symlinks in $path. The resulting
path only consists of directories (Same as Cwd::realpath).
This request can be used to get the absolute path of the current working directory by
passing it a path of . (a single dot).
aio_rename $srcpath, $dstpath, $callback->($status)
Asynchronously rename the object at $srcpath to $dstpath, just as rename(2) and call
the callback with the result code.
aio_mkdir $pathname, $mode, $callback->($status)
Asynchronously mkdir (create) a directory and call the callback with the result code.
$mode will be modified by the umask at the time the request is executed, so do not
change your umask.
aio_rmdir $pathname, $callback->($status)
Asynchronously rmdir (delete) a directory and call the callback with the result code.
aio_readdir $pathname, $callback->($entries)
Unlike the POSIX call of the same name, "aio_readdir" reads an entire directory (i.e.
opendir + readdir + closedir). The entries will not be sorted, and will NOT include
the "." and ".." entries.
The callback is passed a single argument which is either "undef" or an array-ref with
the filenames.
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
Quite similar to "aio_readdir", but the $flags argument allows one to tune behaviour
and output format. In case of an error, $entries will be "undef".
The flags are a combination of the following constants, ORed together (the flags will
also be passed to the callback, possibly modified):
IO::AIO::READDIR_DENTS
When this flag is off, then the callback gets an arrayref consisting of names only
(as with "aio_readdir"), otherwise it gets an arrayref with "[$name, $type,
$inode]" arrayrefs, each describing a single directory entry in more detail.
$name is the name of the entry.
$type is one of the "IO::AIO::DT_xxx" constants:
"IO::AIO::DT_UNKNOWN", "IO::AIO::DT_FIFO", "IO::AIO::DT_CHR", "IO::AIO::DT_DIR",
"IO::AIO::DT_BLK", "IO::AIO::DT_REG", "IO::AIO::DT_LNK", "IO::AIO::DT_SOCK",
"IO::AIO::DT_WHT".
"IO::AIO::DT_UNKNOWN" means just that: readdir does not know. If you need to know,
you have to run stat yourself. Also, for speed reasons, the $type scalars are
read-only: you can not modify them.
$inode is the inode number (which might not be exact on systems with 64 bit inode
numbers and 32 bit perls). This field has unspecified content on systems that do
not deliver the inode information.
IO::AIO::READDIR_DIRS_FIRST
When this flag is set, then the names will be returned in an order where likely
directories come first, in optimal stat order. This is useful when you need to
quickly find directories, or you want to find all directories while avoiding to
stat() each entry.
If the system returns type information in readdir, then this is used to find
directories directly. Otherwise, likely directories are names beginning with ".",
or otherwise names with no dots, of which names with short names are tried first.
IO::AIO::READDIR_STAT_ORDER
When this flag is set, then the names will be returned in an order suitable for
stat()'ing each one. That is, when you plan to stat() all files in the given
directory, then the returned order will likely be fastest.
If both this flag and "IO::AIO::READDIR_DIRS_FIRST" are specified, then the likely
dirs come first, resulting in a less optimal stat order.
IO::AIO::READDIR_FOUND_UNKNOWN
This flag should not be set when calling "aio_readdirx". Instead, it is being set
by "aio_readdirx", when any of the $type's found were "IO::AIO::DT_UNKNOWN". The
absence of this flag therefore indicates that all $type's are known, which can be
used to speed up some algorithms.
aio_load $pathname, $data, $callback->($status)
This is a composite request that tries to fully load the given file into memory.
Status is the same as with aio_read.
aio_copy $srcpath, $dstpath, $callback->($status)
Try to copy the file (directories not supported as either source or destination) from
$srcpath to $dstpath and call the callback with a status of 0 (ok) or "-1" (error, see
$!).
This is a composite request that creates the destination file with mode 0200 and
copies the contents of the source file into it using "aio_sendfile", followed by
restoring atime, mtime, access mode and uid/gid, in that order.
If an error occurs, the partial destination file will be unlinked, if possible, except
when setting atime, mtime, access mode and uid/gid, where errors are being ignored.
aio_move $srcpath, $dstpath, $callback->($status)
Try to move the file (directories not supported as either source or destination) from
$srcpath to $dstpath and call the callback with a status of 0 (ok) or "-1" (error, see
$!).
This is a composite request that tries to rename(2) the file first; if rename fails
with "EXDEV", it copies the file with "aio_copy" and, if that is successful, unlinks
the $srcpath.
aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
Scans a directory (similar to "aio_readdir") but additionally tries to efficiently
separate the entries of directory $path into two sets of names, directories you can
recurse into (directories), and ones you cannot recurse into (everything else,
including symlinks to directories).
"aio_scandir" is a composite request that creates of many sub requests_ $maxreq
specifies the maximum number of outstanding aio requests that this function generates.
If it is "<= 0", then a suitable default will be chosen (currently 4).
On error, the callback is called without arguments, otherwise it receives two array-
refs with path-relative entry names.
Example:
aio_scandir $dir, 0, sub {
my ($dirs, $nondirs) = @_;
print "real directories: @$dirs\n";
print "everything else: @$nondirs\n";
};
Implementation notes.
The "aio_readdir" cannot be avoided, but "stat()"'ing every entry can.
If readdir returns file type information, then this is used directly to find
directories.
Otherwise, after reading the directory, the modification time, size etc. of the
directory before and after the readdir is checked, and if they match (and isn't the
current time), the link count will be used to decide how many entries are directories
(if >= 2). Otherwise, no knowledge of the number of subdirectories will be assumed.
Then entries will be sorted into likely directories a non-initial dot currently) and
likely non-directories (see "aio_readdirx"). Then every entry plus an appended "/."
will be "stat"'ed, likely directories first, in order of their inode numbers. If that
succeeds, it assumes that the entry is a directory or a symlink to directory (which
will be checked separately). This is often faster than stat'ing the entry itself
because filesystems might detect the type of the entry without reading the inode data
(e.g. ext2fs filetype feature), even on systems that cannot return the filetype
information on readdir.
If the known number of directories (link count - 2) has been reached, the rest of the
entries is assumed to be non-directories.
This only works with certainty on POSIX (= UNIX) filesystems, which fortunately are
the vast majority of filesystems around.
It will also likely work on non-POSIX filesystems with reduced efficiency as those
tend to return 0 or 1 as link counts, which disables the directory counting heuristic.
aio_rmtree $pathname, $callback->($status)
Delete a directory tree starting (and including) $path, return the status of the final
"rmdir" only. This is a composite request that uses "aio_scandir" to recurse into and
rmdir directories, and unlink everything else.
aio_sync $callback->($status)
Asynchronously call sync and call the callback when finished.
aio_fsync $fh, $callback->($status)
Asynchronously call fsync on the given filehandle and call the callback with the fsync
result code.
aio_fdatasync $fh, $callback->($status)
Asynchronously call fdatasync on the given filehandle and call the callback with the
fdatasync result code.
If this call isn't available because your OS lacks it or it couldn't be detected, it
will be emulated by calling "fsync" instead.
aio_syncfs $fh, $callback->($status)
Asynchronously call the syncfs syscall to sync the filesystem associated to the given
filehandle and call the callback with the syncfs result code. If syncfs is not
available, calls sync(), but returns "-1" and sets errno to "ENOSYS" nevertheless.
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
Sync the data portion of the file specified by $offset and $length to disk (but NOT
the metadata), by calling the Linux-specific sync_file_range call. If sync_file_range
is not available or it returns ENOSYS, then fdatasync or fsync is being substituted.
$flags can be a combination of "IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE",
"IO::AIO::SYNC_FILE_RANGE_WRITE" and "IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER": refer to
the sync_file_range manpage for details.
aio_pathsync $pathname, $callback->($status)
This request tries to open, fsync and close the given path. This is a composite
request intended to sync directories after directory operations (E.g. rename). This
might not work on all operating systems or have any specific effect, but usually it
makes sure that directory changes get written to disc. It works for anything that can
be opened for read-only, not just directories.
Future versions of this function might fall back to other methods when "fsync" on the
directory fails (such as calling "sync").
Passes 0 when everything went ok, and "-1" on error.
aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
This is a rather advanced IO::AIO call, which only works on mmap(2)ed scalars (see the
"IO::AIO::mmap" function, although it also works on data scalars managed by the
Sys::Mmap or Mmap modules, note that the scalar must only be modified in-place while
an aio operation is pending on it).
It calls the "msync" function of your OS, if available, with the memory area starting
at $offset in the string and ending $length bytes later. If $length is negative,
counts from the end, and if $length is "undef", then it goes till the end of the
string. The flags can be a combination of "IO::AIO::MS_ASYNC",
"IO::AIO::MS_INVALIDATE" and "IO::AIO::MS_SYNC".
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
This is a rather advanced IO::AIO call, which works best on mmap(2)ed scalars.
It touches (reads or writes) all memory pages in the specified range inside the
scalar. All caveats and parameters are the same as for "aio_msync", above, except for
flags, which must be either 0 (which reads all pages and ensures they are
instantiated) or "IO::AIO::MT_MODIFY", which modifies the memory page s(by reading and
writing an octet from it, which dirties the page).
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
This is a rather advanced IO::AIO call, which works best on mmap(2)ed scalars.
It reads in all the pages of the underlying storage into memory (if any) and locks
them, so they are not getting swapped/paged out or removed.
If $length is undefined, then the scalar will be locked till the end.
On systems that do not implement "mlock", this function returns "-1" and sets errno to
"ENOSYS".
Note that the corresponding "munlock" is synchronous and is documented under
"MISCELLANEOUS FUNCTIONS".
Example: open a file, mmap and mlock it - both will be undone when $data gets
destroyed.
open my $fh, "<", $path or die "$path: $!";
my $data;
IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
aio_mlock $data; # mlock in background
aio_mlockall $flags, $callback->($status)
Calls the "mlockall" function with the given $flags (a combination of
"IO::AIO::MCL_CURRENT" and "IO::AIO::MCL_FUTURE").
On systems that do not implement "mlockall", this function returns "-1" and sets errno
to "ENOSYS".
Note that the corresponding "munlockall" is synchronous and is documented under
"MISCELLANEOUS FUNCTIONS".
Example: asynchronously lock all current and future pages into memory.
aio_mlockall IO::AIO::MCL_FUTURE;
aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
Queries the extents of the given file (by calling the Linux "FIEMAP" ioctl, see
<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If the ioctl is not
available on your OS, then this request will fail with "ENOSYS".
$start is the starting offset to query extents for, $length is the size of the range
to query - if it is "undef", then the whole file will be queried.
$flags is a combination of flags ("IO::AIO::FIEMAP_FLAG_SYNC" or
"IO::AIO::FIEMAP_FLAG_XATTR" - "IO::AIO::FIEMAP_FLAGS_COMPAT" is also exported), and
is normally 0 or "IO::AIO::FIEMAP_FLAG_SYNC" to query the data portion.
$count is the maximum number of extent records to return. If it is "undef", then
IO::AIO queries all extents of the range. As a very special case, if it is 0, then the
callback receives the number of extents instead of the extents themselves (which is
unreliable, see below).
If an error occurs, the callback receives no arguments. The special "errno" value
"IO::AIO::EBADR" is available to test for flag errors.
Otherwise, the callback receives an array reference with extent structures. Each
extent structure is an array reference itself, with the following members:
[$logical, $physical, $length, $flags]
Flags is any combination of the following flag values (typically either 0 or
"IO::AIO::FIEMAP_EXTENT_LAST" (1)):
"IO::AIO::FIEMAP_EXTENT_LAST", "IO::AIO::FIEMAP_EXTENT_UNKNOWN",
"IO::AIO::FIEMAP_EXTENT_DELALLOC", "IO::AIO::FIEMAP_EXTENT_ENCODED",
"IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED", "IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED",
"IO::AIO::FIEMAP_EXTENT_DATA_INLINE", "IO::AIO::FIEMAP_EXTENT_DATA_TAIL",
"IO::AIO::FIEMAP_EXTENT_UNWRITTEN", "IO::AIO::FIEMAP_EXTENT_MERGED" or
"IO::AIO::FIEMAP_EXTENT_SHARED".
At the time of this writing (Linux 3.2), this requets is unreliable unless $count is
"undef", as the kernel has all sorts of bugs preventing it to return all extents of a
range for files with large number of extents. The code works around all these issues
if $count is undef.
aio_group $callback->(...)
This is a very special aio request: Instead of doing something, it is a container for
other aio requests, which is useful if you want to bundle many requests into a single,
composite, request with a definite callback and the ability to cancel the whole
request with its subrequests.
Returns an object of class IO::AIO::GRP. See its documentation below for more info.
Example:
my $grp = aio_group sub {
print "all stats done\n";
};
add $grp
(aio_stat ...),
(aio_stat ...),
...;
aio_nop $callback->()
This is a special request - it does nothing in itself and is only used for side
effects, such as when you want to add a dummy request to a group so that finishing the
requests in the group depends on executing the given code.
While this request does nothing, it still goes through the execution phase and still
requires a worker thread. Thus, the callback will not be executed immediately but only
after other requests in the queue have entered their execution phase. This can be used
to measure request latency.
IO::AIO::aio_busy $fractional_seconds, $callback->() *NOT EXPORTED*
Mainly used for debugging and benchmarking, this aio request puts one of the request
workers to sleep for the given time.
While it is theoretically handy to have simple I/O scheduling requests like sleep and
file handle readable/writable, the overhead this creates is immense (it blocks a
thread for a long time) so do not use this function except to put your application
under artificial I/O pressure.
IO::AIO::WD - multiple working directories
Your process only has one current working directory, which is used by all threads. This
makes it hard to use relative paths (some other component could call "chdir" at any time,
and it is hard to control when the path will be used by IO::AIO).
One solution for this is to always use absolute paths. This usually works, but can be
quite slow (the kernel has to walk the whole path on every access), and can also be a
hassle to implement.
Newer POSIX systems have a number of functions (openat, fdopendir, futimensat and so on)
that make it possible to specify working directories per operation.
For portability, and because the clowns who "designed", or shall I write, perpetrated this
new interface were obviously half-drunk, this abstraction cannot be perfect, though.
IO::AIO allows you to convert directory paths into a so-called IO::AIO::WD object. This
object stores the canonicalised, absolute version of the path, and on systems that allow
it, also a directory file descriptor.
Everywhere where a pathname is accepted by IO::AIO (e.g. in "aio_stat" or "aio_unlink"),
one can specify an array reference with an IO::AIO::WD object and a pathname instead (or
the IO::AIO::WD object alone, which gets interpreted as "[$wd, "."]"). If the pathname is
absolute, the IO::AIO::WD object is ignored, otherwise the pathname is resolved relative
to that IO::AIO::WD object.
For example, to get a wd object for /etc and then stat passwd inside, you would write:
aio_wd "/etc", sub {
my $etcdir = shift;
# although $etcdir can be undef on error, there is generally no reason
# to check for errors here, as aio_stat will fail with ENOENT
# when $etcdir is undef.
aio_stat [$etcdir, "passwd"], sub {
# yay
};
};
That "aio_wd" is a request and not a normal function shows that creating an IO::AIO::WD
object is itself a potentially blocking operation, which is why it is done asynchronously.
To stat the directory obtained with "aio_wd" above, one could write either of the
following three request calls:
aio_lstat "/etc" , sub { ... # pathname as normal string
aio_lstat [$wd, "."], sub { ... # "." relative to $wd (i.e. $wd itself)
aio_lstat $wd , sub { ... # shorthand for the previous
As with normal pathnames, IO::AIO keeps a copy of the working directory object and the
pathname string, so you could write the following without causing any issues due to $path
getting reused:
my $path = [$wd, undef];
for my $name (qw(abc def ghi)) {
$path->[1] = $name;
aio_stat $path, sub {
# ...
};
}
There are some caveats: when directories get renamed (or deleted), the pathname string
doesn't change, so will point to the new directory (or nowhere at all), while the
directory fd, if available on the system, will still point to the original directory. Most
functions accepting a pathname will use the directory fd on newer systems, and the string
on older systems. Some functions (such as realpath) will always rely on the string form of
the pathname.
So this fucntionality is mainly useful to get some protection against "chdir", to easily
get an absolute path out of a relative path for future reference, and to speed up doing
many operations in the same directory (e.g. when stat'ing all files in a directory).
The following functions implement this working directory abstraction:
aio_wd $pathname, $callback->($wd)
Asynchonously canonicalise the given pathname and convert it to an IO::AIO::WD object
representing it. If possible and supported on the system, also open a directory fd to
speed up pathname resolution relative to this working directory.
If something goes wrong, then "undef" is passwd to the callback instead of a working
directory object and $! is set appropriately. Since passing "undef" as working
directory component of a pathname fails the request with "ENOENT", there is often no
need for error checking in the "aio_wd" callback, as future requests using the value
will fail in the expected way.
If this call isn't available because your OS lacks it or it couldn't be detected, it
will be emulated by calling "fsync" instead.
IO::AIO::CWD
This is a compiletime constant (object) that represents the process current working
directory.
Specifying this object as working directory object for a pathname is as if the
pathname would be specified directly, without a directory object, e.g., these calls
are functionally identical:
aio_stat "somefile", sub { ... };
aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
IO::AIO::REQ CLASS
All non-aggregate "aio_*" functions return an object of this class when called in non-void
context.
cancel $req
Cancels the request, if possible. Has the effect of skipping execution when entering
the execute state and skipping calling the callback when entering the the result
state, but will leave the request otherwise untouched (with the exception of readdir).
That means that requests that currently execute will not be stopped and resources held
by the request will not be freed prematurely.
cb $req $callback->(...)
Replace (or simply set) the callback registered to the request.
IO::AIO::GRP CLASS
This class is a subclass of IO::AIO::REQ, so all its methods apply to objects of this
class, too.
A IO::AIO::GRP object is a special request that can contain multiple other aio requests.
You create one by calling the "aio_group" constructing function with a callback that will
be called when all contained requests have entered the "done" state:
my $grp = aio_group sub {
print "all requests are done\n";
};
You add requests by calling the "add" method with one or more "IO::AIO::REQ" objects:
$grp->add (aio_unlink "...");
add $grp aio_stat "...", sub {
$_[0] or return $grp->result ("error");
# add another request dynamically, if first succeeded
add $grp aio_open "...", sub {
$grp->result ("ok");
};
};
This makes it very easy to create composite requests (see the source of "aio_move" for an
application) that work and feel like simple requests.
• The IO::AIO::GRP objects will be cleaned up during calls to "IO::AIO::poll_cb", just
like any other request.
• They can be canceled like any other request. Canceling will cancel not only the
request itself, but also all requests it contains.
• They can also can also be added to other IO::AIO::GRP objects.
• You must not add requests to a group from within the group callback (or any later
time).
Their lifetime, simplified, looks like this: when they are empty, they will finish very
quickly. If they contain only requests that are in the "done" state, they will also
finish. Otherwise they will continue to exist.
That means after creating a group you have some time to add requests (precisely before the
callback has been invoked, which is only done within the "poll_cb"). And in the callbacks
of those requests, you can add further requests to the group. And only when all those
requests have finished will the the group itself finish.
add $grp ...
$grp->add (...)
Add one or more requests to the group. Any type of IO::AIO::REQ can be added,
including other groups, as long as you do not create circular dependencies.
Returns all its arguments.
$grp->cancel_subs
Cancel all subrequests and clears any feeder, but not the group request itself. Useful
when you queued a lot of events but got a result early.
The group request will finish normally (you cannot add requests to the group).
$grp->result (...)
Set the result value(s) that will be passed to the group callback when all subrequests
have finished and set the groups errno to the current value of errno (just like
calling "errno" without an error number). By default, no argument will be passed and
errno is zero.
$grp->errno ([$errno])
Sets the group errno value to $errno, or the current value of errno when the argument
is missing.
Every aio request has an associated errno value that is restored when the callback is
invoked. This method lets you change this value from its default (0).
Calling "result" will also set errno, so make sure you either set $! before the call
to "result", or call c<errno> after it.
feed $grp $callback->($grp)
Sets a feeder/generator on this group: every group can have an attached generator that
generates requests if idle. The idea behind this is that, although you could just
queue as many requests as you want in a group, this might starve other requests for a
potentially long time. For example, "aio_scandir" might generate hundreds of thousands
of "aio_stat" requests, delaying any later requests for a long time.
To avoid this, and allow incremental generation of requests, you can instead a group
and set a feeder on it that generates those requests. The feed callback will be called
whenever there are few enough (see "limit", below) requests active in the group itself
and is expected to queue more requests.
The feed callback can queue as many requests as it likes (i.e. "add" does not impose
any limits).
If the feed does not queue more requests when called, it will be automatically removed
from the group.
If the feed limit is 0 when this method is called, it will be set to 2 automatically.
Example:
# stat all files in @files, but only ever use four aio requests concurrently:
my $grp = aio_group sub { print "finished\n" };
limit $grp 4;
feed $grp sub {
my $file = pop @files
or return;
add $grp aio_stat $file, sub { ... };
};
limit $grp $num
Sets the feeder limit for the group: The feeder will be called whenever the group
contains less than this many requests.
Setting the limit to 0 will pause the feeding process.
The default value for the limit is 0, but note that setting a feeder automatically
bumps it up to 2.
SUPPORT FUNCTIONS
EVENT PROCESSING AND EVENT LOOP INTEGRATION
$fileno = IO::AIO::poll_fileno
Return the request result pipe file descriptor. This filehandle must be polled for
reading by some mechanism outside this module (e.g. EV, Glib, select and so on, see
below or the SYNOPSIS). If the pipe becomes readable you have to call "poll_cb" to
check the results.
See "poll_cb" for an example.
IO::AIO::poll_cb
Process some outstanding events on the result pipe. You have to call this regularly.
Returns 0 if all events could be processed (or there were no events to process), or
"-1" if it returned earlier for whatever reason. Returns immediately when no events
are outstanding. The amount of events processed depends on the settings of
"IO::AIO::max_poll_req" and "IO::AIO::max_poll_time".
If not all requests were processed for whatever reason, the filehandle will still be
ready when "poll_cb" returns, so normally you don't have to do anything special to
have it called later.
Apart from calling "IO::AIO::poll_cb" when the event filehandle becomes ready, it can
be beneficial to call this function from loops which submit a lot of requests, to make
sure the results get processed when they become available and not just when the loop
is finished and the event loop takes over again. This function returns very fast when
there are no outstanding requests.
Example: Install an Event watcher that automatically calls IO::AIO::poll_cb with high
priority (more examples can be found in the SYNOPSIS section, at the top of this
document):
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', async => 1,
cb => \&IO::AIO::poll_cb);
IO::AIO::poll_wait
If there are any outstanding requests and none of them in the result phase, wait till
the result filehandle becomes ready for reading (simply does a "select" on the
filehandle. This is useful if you want to synchronously wait for some requests to
finish).
See "nreqs" for an example.
IO::AIO::poll
Waits until some requests have been handled.
Returns the number of requests processed, but is otherwise strictly equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
IO::AIO::flush
Wait till all outstanding AIO requests have been handled.
Strictly equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
These set the maximum number of requests (default 0, meaning infinity) that are being
processed by "IO::AIO::poll_cb" in one call, respectively the maximum amount of time
(default 0, meaning infinity) spent in "IO::AIO::poll_cb" to process requests (more
correctly the mininum amount of time "poll_cb" is allowed to use).
Setting "max_poll_time" to a non-zero value creates an overhead of one syscall per
request processed, which is not normally a problem unless your callbacks are really
really fast or your OS is really really slow (I am not mentioning Solaris here). Using
"max_poll_reqs" incurs no overhead.
Setting these is useful if you want to ensure some level of interactiveness when perl
is not fast enough to process all requests in time.
For interactive programs, values such as 0.01 to 0.1 should be fine.
Example: Install an Event watcher that automatically calls IO::AIO::poll_cb with low
priority, to ensure that other parts of the program get the CPU sometimes even under
high AIO load.
# try not to spend much more than 0.1s in poll_cb
IO::AIO::max_poll_time 0.1;
# use a low priority so other tasks have priority
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', nice => 1,
cb => &IO::AIO::poll_cb);
CONTROLLING THE NUMBER OF THREADS
IO::AIO::min_parallel $nthreads
Set the minimum number of AIO threads to $nthreads. The current default is 8, which
means eight asynchronous operations can execute concurrently at any one time (the
number of outstanding requests, however, is unlimited).
IO::AIO starts threads only on demand, when an AIO request is queued and no free
thread exists. Please note that queueing up a hundred requests can create demand for a
hundred threads, even if it turns out that everything is in the cache and could have
been processed faster by a single thread.
It is recommended to keep the number of threads relatively low, as some Linux kernel
versions will scale negatively with the number of threads (higher parallelity => MUCH
higher latency). With current Linux 2.6 versions, 4-32 threads should be fine.
Under most circumstances you don't need to call this function, as the module selects a
default that is suitable for low to moderate load.
IO::AIO::max_parallel $nthreads
Sets the maximum number of AIO threads to $nthreads. If more than the specified number
of threads are currently running, this function kills them. This function blocks until
the limit is reached.
While $nthreads are zero, aio requests get queued but not executed until the number of
threads has been increased again.
This module automatically runs "max_parallel 0" at program end, to ensure that all
threads are killed and that there are no outstanding requests.
Under normal circumstances you don't need to call this function.
IO::AIO::max_idle $nthreads
Limit the number of threads (default: 4) that are allowed to idle (i.e., threads that
did not get a request to process within the idle timeout (default: 10 seconds). That
means if a thread becomes idle while $nthreads other threads are also idle, it will
free its resources and exit.
This is useful when you allow a large number of threads (e.g. 100 or 1000) to allow
for extremely high load situations, but want to free resources under normal
circumstances (1000 threads can easily consume 30MB of RAM).
The default is probably ok in most situations, especially if thread creation is fast.
If thread creation is very slow on your system you might want to use larger values.
IO::AIO::idle_timeout $seconds
Sets the minimum idle timeout (default 10) after which worker threads are allowed to
exit. SEe "IO::AIO::max_idle".
IO::AIO::max_outstanding $maxreqs
Sets the maximum number of outstanding requests to $nreqs. If you do queue up more
than this number of requests, the next call to "IO::AIO::poll_cb" (and other functions
calling "poll_cb", such as "IO::AIO::flush" or "IO::AIO::poll") will block until the
limit is no longer exceeded.
In other words, this setting does not enforce a queue limit, but can be used to make
poll functions block if the limit is exceeded.
This is a very bad function to use in interactive programs because it blocks, and a
bad way to reduce concurrency because it is inexact: Better use an "aio_group"
together with a feed callback.
It's main use is in scripts without an event loop - when you want to stat a lot of
files, you can write somehting like this:
IO::AIO::max_outstanding 32;
for my $path (...) {
aio_stat $path , ...;
IO::AIO::poll_cb;
}
IO::AIO::flush;
The call to "poll_cb" inside the loop will normally return instantly, but as soon as
more thna 32 reqeusts are in-flight, it will block until some requests have been
handled. This keeps the loop from pushing a large number of "aio_stat" requests onto
the queue.
The default value for "max_outstanding" is very large, so there is no practical limit
on the number of outstanding requests.
STATISTICAL INFORMATION
IO::AIO::nreqs
Returns the number of requests currently in the ready, execute or pending states (i.e.
for which their callback has not been invoked yet).
Example: wait till there are no outstanding requests anymore:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
IO::AIO::nready
Returns the number of requests currently in the ready state (not yet executed).
IO::AIO::npending
Returns the number of requests currently in the pending state (executed, but not yet
processed by poll_cb).
MISCELLANEOUS FUNCTIONS
IO::AIO implements some functions that might be useful, but are not asynchronous.
IO::AIO::sendfile $ofh, $ifh, $offset, $count
Calls the "eio_sendfile_sync" function, which is like "aio_sendfile", but is blocking
(this makes most sense if you know the input data is likely cached already and the
output filehandle is set to non-blocking operations).
Returns the number of bytes copied, or "-1" on error.
IO::AIO::fadvise $fh, $offset, $len, $advice
Simply calls the "posix_fadvise" function (see its manpage for details). The following
advice constants are available: "IO::AIO::FADV_NORMAL", "IO::AIO::FADV_SEQUENTIAL",
"IO::AIO::FADV_RANDOM", "IO::AIO::FADV_NOREUSE", "IO::AIO::FADV_WILLNEED",
"IO::AIO::FADV_DONTNEED".
On systems that do not implement "posix_fadvise", this function returns ENOSYS,
otherwise the return value of "posix_fadvise".
IO::AIO::madvise $scalar, $offset, $len, $advice
Simply calls the "posix_madvise" function (see its manpage for details). The following
advice constants are available: "IO::AIO::MADV_NORMAL", "IO::AIO::MADV_SEQUENTIAL",
"IO::AIO::MADV_RANDOM", "IO::AIO::MADV_WILLNEED", "IO::AIO::MADV_DONTNEED".
On systems that do not implement "posix_madvise", this function returns ENOSYS,
otherwise the return value of "posix_madvise".
IO::AIO::mprotect $scalar, $offset, $len, $protect
Simply calls the "mprotect" function on the preferably AIO::mmap'ed $scalar (see its
manpage for details). The following protect constants are available:
"IO::AIO::PROT_NONE", "IO::AIO::PROT_READ", "IO::AIO::PROT_WRITE",
"IO::AIO::PROT_EXEC".
On systems that do not implement "mprotect", this function returns ENOSYS, otherwise
the return value of "mprotect".
IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
Memory-maps a file (or anonymous memory range) and attaches it to the given $scalar,
which will act like a string scalar. Returns true on success, and false otherwise.
The only operations allowed on the scalar are "substr"/"vec" that don't change the
string length, and most read-only operations such as copying it or searching it with
regexes and so on.
Anything else is unsafe and will, at best, result in memory leaks.
The memory map associated with the $scalar is automatically removed when the $scalar
is destroyed, or when the "IO::AIO::mmap" or "IO::AIO::munmap" functions are called.
This calls the "mmap"(2) function internally. See your system's manual page for
details on the $length, $prot and $flags parameters.
The $length must be larger than zero and smaller than the actual filesize.
$prot is a combination of "IO::AIO::PROT_NONE", "IO::AIO::PROT_EXEC",
"IO::AIO::PROT_READ" and/or "IO::AIO::PROT_WRITE",
$flags can be a combination of "IO::AIO::MAP_SHARED" or "IO::AIO::MAP_PRIVATE", or a
number of system-specific flags (when not available, the are defined as 0):
"IO::AIO::MAP_ANONYMOUS" (which is set to "MAP_ANON" if your system only provides this
constant), "IO::AIO::MAP_HUGETLB", "IO::AIO::MAP_LOCKED", "IO::AIO::MAP_NORESERVE",
"IO::AIO::MAP_POPULATE" or "IO::AIO::MAP_NONBLOCK"
If $fh is "undef", then a file descriptor of "-1" is passed.
$offset is the offset from the start of the file - it generally must be a multiple of
"IO::AIO::PAGESIZE" and defaults to 0.
Example:
use Digest::MD5;
use IO::AIO;
open my $fh, "<verybigfile"
or die "$!";
IO::AIO::mmap my $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh
or die "verybigfile: $!";
my $fast_md5 = md5 $data;
IO::AIO::munmap $scalar
Removes a previous mmap and undefines the $scalar.
IO::AIO::munlock $scalar, $offset = 0, $length = undef
Calls the "munlock" function, undoing the effects of a previous "aio_mlock" call (see
its description for details).
IO::AIO::munlockall
Calls the "munlockall" function.
On systems that do not implement "munlockall", this function returns ENOSYS, otherwise
the return value of "munlockall".
IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
Calls the GNU/Linux splice(2) syscall, if available. If $r_off or $w_off are "undef",
then "NULL" is passed for these, otherwise they should be the file offset.
$r_fh and $w_fh should not refer to the same file, as splice might silently corrupt
the data in this case.
The following symbol flag values are available: "IO::AIO::SPLICE_F_MOVE",
"IO::AIO::SPLICE_F_NONBLOCK", "IO::AIO::SPLICE_F_MORE" and "IO::AIO::SPLICE_F_GIFT".
See the splice(2) manpage for details.
IO::AIO::tee $r_fh, $w_fh, $length, $flags
Calls the GNU/Linux tee(2) syscall, see it's manpage and the description for
"IO::AIO::splice" above for details.
EVENT LOOP INTEGRATION
It is recommended to use AnyEvent::AIO to integrate IO::AIO automatically into many event
loops:
# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
use AnyEvent::AIO;
You can also integrate IO::AIO manually into many event loops, here are some examples of
how to do this:
# EV integration
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# Event integration
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r',
cb => \&IO::AIO::poll_cb);
# Glib/Gtk2 integration
add_watch Glib::IO IO::AIO::poll_fileno,
in => sub { IO::AIO::poll_cb; 1 };
# Tk integration
Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
readable => \&IO::AIO::poll_cb);
# Danga::Socket integration
Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
\&IO::AIO::poll_cb);
FORK BEHAVIOUR
Usage of pthreads in a program changes the semantics of fork considerably. Specifically,
only async-safe functions can be called after fork. Perl doesn't know about this, so in
general, you cannot call fork with defined behaviour in perl if pthreads are involved.
IO::AIO uses pthreads, so this applies, but many other extensions and (for inexplicable
reasons) perl itself often is linked against pthreads, so this limitation applies to quite
a lot of perls.
This module no longer tries to fight your OS, or POSIX. That means IO::AIO only works in
the process that loaded it. Forking is fully supported, but using IO::AIO in the child is
not.
You might get around by not using IO::AIO before (or after) forking. You could also try to
call the IO::AIO::reinit function in the child:
IO::AIO::reinit
Abandons all current requests and I/O threads and simply reinitialises all data
structures. This is not an operation supported by any standards, but happens to work
on GNU/Linux and some newer BSD systems.
The only reasonable use for this function is to call it after forking, if "IO::AIO"
was used in the parent. Calling it while IO::AIO is active in the process will result
in undefined behaviour. Calling it at any time will also result in any undefined (by
POSIX) behaviour.
MEMORY USAGE
Per-request usage:
Each aio request uses - depending on your architecture - around 100-200 bytes of memory.
In addition, stat requests need a stat buffer (possibly a few hundred bytes), readdir
requires a result buffer and so on. Perl scalars and other data passed into aio requests
will also be locked and will consume memory till the request has entered the done state.
This is not awfully much, so queuing lots of requests is not usually a problem.
Per-thread usage:
In the execution phase, some aio requests require more memory for temporary buffers, and
each thread requires a stack and other data structures (usually around 16k-128k, depending
on the OS).
KNOWN BUGS
Known bugs will be fixed in the next release.
SEE ALSO
AnyEvent::AIO for easy integration into event loops, Coro::AIO for a more natural syntax.
AUTHOR
Marc Lehmann <schmorp@schmorp.de>
http://home.schmorp.de/