Provided by: erlang-manpages_16.b.3-dfsg-1ubuntu2.2_all 
NAME
disk_log - A disk based term logging facility
DESCRIPTION
disk_log is a disk based term logger which makes it possible to efficiently log items on files. Two types
of logs are supported, halt logs and wrap logs. A halt log appends items to a single file, the size of
which may or may not be limited by the disk log module, whereas a wrap log utilizes a sequence of wrap
log files of limited size. As a wrap log file has been filled up, further items are logged onto to the
next file in the sequence, starting all over with the first file when the last file has been filled up.
For the sake of efficiency, items are always written to files as binaries.
Two formats of the log files are supported, the internal format and the external format. The internal
format supports automatic repair of log files that have not been properly closed, and makes it possible
to efficiently read logged items in chunks using a set of functions defined in this module. In fact, this
is the only way to read internally formatted logs. The external format leaves it up to the user to read
the logged deep byte lists. The disk log module cannot repair externally formatted logs. An item logged
to an internally formatted log must not occupy more than 4 GB of disk space (the size must fit in 4
bytes).
For each open disk log there is one process that handles requests made to the disk log; the disk log
process is created when open/1 is called, provided there exists no process handling the disk log. A
process that opens a disk log can either be an owner or an anonymous user of the disk log. Each owner is
linked to the disk log process, and the disk log is closed by the owner should the owner terminate.
Owners can subscribe to notifications, messages of the form {disk_log, Node, Log, Info} that are sent
from the disk log process when certain events occur, see the commands below and in particular the open/1
option notify. There can be several owners of a log, but a process cannot own a log more than once. One
and the same process may, however, open the log as a user more than once. For a disk log process to
properly close its file and terminate, it must be closed by its owners and once by some non-owner process
for each time the log was used anonymously; the users are counted, and there must not be any users left
when the disk log process terminates.
Items can be logged synchronously by using the functions log/2, blog/2, log_terms/2 and blog_terms/2. For
each of these functions, the caller is put on hold until the items have been logged (but not necessarily
written, use sync/1 to ensure that). By adding an a to each of the mentioned function names we get
functions that log items asynchronously. Asynchronous functions do not wait for the disk log process to
actually write the items to the file, but return the control to the caller more or less immediately.
When using the internal format for logs, the functions log/2, log_terms/2, alog/2, and alog_terms/2
should be used. These functions log one or more Erlang terms. By prefixing each of the functions with a b
(for "binary") we get the corresponding blog functions for the external format. These functions log one
or more deep lists of bytes or, alternatively, binaries of deep lists of bytes. For example, to log the
string "hello" in ASCII format, we can use disk_log:blog(Log, "hello"), or disk_log:blog(Log,
list_to_binary("hello")). The two alternatives are equally efficient. The blog functions can be used for
internally formatted logs as well, but in this case they must be called with binaries constructed with
calls to term_to_binary/1. There is no check to ensure this, it is entirely the responsibility of the
caller. If these functions are called with binaries that do not correspond to Erlang terms, the chunk/2,3
and automatic repair functions will fail. The corresponding terms (not the binaries) will be returned
when chunk/2,3 is called.
A collection of open disk logs with the same name running on different nodes is said to be a a
distributed disk log if requests made to any one of the logs are automatically made to the other logs as
well. The members of such a collection will be called individual distributed disk logs, or just
distributed disk logs if there is no risk of confusion. There is no order between the members of such a
collection. For instance, logged terms are not necessarily written onto the node where the request was
made before written onto the other nodes. One could note here that there are a few functions that do not
make requests to all members of distributed disk logs, namely info, chunk, bchunk, chunk_step and lclose.
An open disk log that is not a distributed disk log is said to be a local disk log. A local disk log is
accessible only from the node where the disk log process runs, whereas a distributed disk log is
accessible from all nodes in the Erlang system, with exception for those nodes where a local disk log
with the same name as the distributed disk log exists. All processes on nodes that have access to a local
or distributed disk log can log items or otherwise change, inspect or close the log.
It is not guaranteed that all log files of a distributed disk log contain the same log items; there is no
attempt made to synchronize the contents of the files. However, as long as at least one of the involved
nodes is alive at each time, all items will be logged. When logging items to a distributed log, or
otherwise trying to change the log, the replies from individual logs are ignored. If all nodes are down,
the disk log functions reply with a nonode error.
Note:
In some applications it may not be acceptable that replies from individual logs are ignored. An
alternative in such situations is to use several local disk logs instead of one distributed disk log, and
implement the distribution without use of the disk log module.
Errors are reported differently for asynchronous log attempts and other uses of the disk log module. When
used synchronously the disk log module replies with an error message, but when called asynchronously, the
disk log module does not know where to send the error message. Instead owners subscribing to
notifications will receive an error_status message.
The disk log module itself does not report errors to the error_logger module; it is up to the caller to
decide whether the error logger should be employed or not. The function format_error/1 can be used to
produce readable messages from error replies. Information events are however sent to the error logger in
two situations, namely when a log is repaired, or when a file is missing while reading chunks.
The error message no_such_log means that the given disk log is not currently open. Nothing is said about
whether the disk log files exist or not.
Note:
If an attempt to reopen or truncate a log fails (see reopen and truncate) the disk log process
immediately terminates. Before the process terminates links to to owners and blocking processes (see
block) are removed. The effect is that the links work in one direction only; any process using a disk log
has to check for the error message no_such_log if some other process might truncate or reopen the log
simultaneously.
DATA TYPES
log() = term()
dlog_size() = infinity
| integer() >= 1
| {MaxNoBytes :: integer() >= 1,
MaxNoFiles :: integer() >= 1}
dlog_format() = external | internal
dlog_head_opt() = none | term() | binary() | [dlog_byte()]
dlog_byte() = [dlog_byte()] | byte()
dlog_mode() = read_only | read_write
dlog_type() = halt | wrap
continuation()
Chunk continuation returned by chunk/2,3, bchunk/2,3, or chunk_step/3.
bytes() = binary() | [byte()]
invalid_header() = term()
file_error() = term()
EXPORTS
accessible_logs() -> {[LocalLog], [DistributedLog]}
Types:
LocalLog = DistributedLog = log()
The accessible_logs/0 function returns the names of the disk logs accessible on the current node.
The first list contains local disk logs, and the second list contains distributed disk logs.
alog(Log, Term) -> notify_ret()
balog(Log, Bytes) -> notify_ret()
Types:
Log = log()
Term = term()
Bytes = bytes()
notify_ret() = ok | {error, no_such_log}
The alog/2 and balog/2 functions asynchronously append an item to a disk log. The function alog/2
is used for internally formatted logs, and the function balog/2 for externally formatted logs.
balog/2 can be used for internally formatted logs as well provided the binary was constructed with
a call to term_to_binary/1.
The owners that subscribe to notifications will receive the message read_only, blocked_log or
format_external in case the item cannot be written on the log, and possibly one of the messages
wrap, full and error_status if an item was written on the log. The message error_status is sent if
there is something wrong with the header function or a file error occurred.
alog_terms(Log, TermList) -> notify_ret()
balog_terms(Log, ByteList) -> notify_ret()
Types:
Log = log()
TermList = [term()]
ByteList = [bytes()]
notify_ret() = ok | {error, no_such_log}
The alog_terms/2 and balog_terms/2 functions asynchronously append a list of items to a disk log.
The function alog_terms/2 is used for internally formatted logs, and the function balog_terms/2
for externally formatted logs. balog_terms/2 can be used for internally formatted logs as well
provided the binaries were constructed with calls to term_to_binary/1.
The owners that subscribe to notifications will receive the message read_only, blocked_log or
format_external in case the items cannot be written on the log, and possibly one or more of the
messages wrap, full and error_status if items were written on the log. The message error_status is
sent if there is something wrong with the header function or a file error occurred.
block(Log) -> ok | {error, block_error_rsn()}
block(Log, QueueLogRecords) -> ok | {error, block_error_rsn()}
Types:
Log = log()
QueueLogRecords = boolean()
block_error_rsn() = no_such_log | nonode | {blocked_log, log()}
With a call to block/1,2 a process can block a log. If the blocking process is not an owner of the
log, a temporary link is created between the disk log process and the blocking process. The link
is used to ensure that the disk log is unblocked should the blocking process terminate without
first closing or unblocking the log.
Any process can probe a blocked log with info/1 or close it with close/1. The blocking process can
also use the functions chunk/2,3, bchunk/2,3, chunk_step/3, and unblock/1 without being affected
by the block. Any other attempt than those hitherto mentioned to update or read a blocked log
suspends the calling process until the log is unblocked or returns an error message {blocked_log,
Log}, depending on whether the value of QueueLogRecords is true or false. The default value of
QueueLogRecords is true, which is used by block/1.
change_header(Log, Header) -> ok | {error, Reason}
Types:
Log = log()
Header = {head, dlog_head_opt()}
| {head_func, MFA :: {atom(), atom(), list()}}
Reason = no_such_log
| nonode
| {read_only_mode, Log}
| {blocked_log, Log}
| {badarg, head}
The change_header/2 function changes the value of the head or head_func option of a disk log.
change_notify(Log, Owner, Notify) -> ok | {error, Reason}
Types:
Log = log()
Owner = pid()
Notify = boolean()
Reason = no_such_log
| nonode
| {blocked_log, Log}
| {badarg, notify}
| {not_owner, Owner}
The change_notify/3 function changes the value of the notify option for an owner of a disk log.
change_size(Log, Size) -> ok | {error, Reason}
Types:
Log = log()
Size = dlog_size()
Reason = no_such_log
| nonode
| {read_only_mode, Log}
| {blocked_log, Log}
| {new_size_too_small, CurrentSize :: integer() >= 1}
| {badarg, size}
| {file_error, file:filename(), file_error()}
The change_size/2 function changes the size of an open log. For a halt log it is always possible
to increase the size, but it is not possible to decrease the size to something less than the
current size of the file.
For a wrap log it is always possible to increase both the size and number of files, as long as the
number of files does not exceed 65000. If the maximum number of files is decreased, the change
will not be valid until the current file is full and the log wraps to the next file. The redundant
files will be removed next time the log wraps around, i.e. starts to log to file number 1.
As an example, assume that the old maximum number of files is 10 and that the new maximum number
of files is 6. If the current file number is not greater than the new maximum number of files, the
files 7 to 10 will be removed when file number 6 is full and the log starts to write to file
number 1 again. Otherwise the files greater than the current file will be removed when the current
file is full (e.g. if the current file is 8, the files 9 and 10); the files between new maximum
number of files and the current file (i.e. files 7 and 8) will be removed next time file number 6
is full.
If the size of the files is decreased the change will immediately affect the current log. It will
not of course change the size of log files already full until next time they are used.
If the log size is decreased for instance to save space, the function inc_wrap_file/1 can be used
to force the log to wrap.
chunk(Log, Continuation) -> chunk_ret()
chunk(Log, Continuation, N) -> chunk_ret()
bchunk(Log, Continuation) -> bchunk_ret()
bchunk(Log, Continuation, N) -> bchunk_ret()
Types:
Log = log()
Continuation = start | continuation()
N = integer() >= 1 | infinity
chunk_ret() = {Continuation2 :: continuation(),
Terms :: [term()]}
| {Continuation2 :: continuation(),
Terms :: [term()],
Badbytes :: integer() >= 0}
| eof
| {error, Reason :: chunk_error_rsn()}
bchunk_ret() = {Continuation2 :: continuation(),
Binaries :: [binary()]}
| {Continuation2 :: continuation(),
Binaries :: [binary()],
Badbytes :: integer() >= 0}
| eof
| {error, Reason :: chunk_error_rsn()}
chunk_error_rsn() = no_such_log
| {format_external, log()}
| {blocked_log, log()}
| {badarg, continuation}
| {not_internal_wrap, log()}
| {corrupt_log_file,
FileName :: file:filename()}
| {file_error, file:filename(), file_error()}
The chunk/2,3 and bchunk/2,3 functions make it possible to efficiently read the terms which have
been appended to an internally formatted log. It minimizes disk I/O by reading 64 kilobyte chunks
from the file. The bchunk/2,3 functions return the binaries read from the file; they do not call
binary_to_term. Otherwise the work just like chunk/2,3.
The first time chunk (or bchunk) is called, an initial continuation, the atom start, must be
provided. If there is a disk log process running on the current node, terms are read from that
log, otherwise an individual distributed log on some other node is chosen, if such a log exists.
When chunk/3 is called, N controls the maximum number of terms that are read from the log in each
chunk. Default is infinity, which means that all the terms contained in the 64 kilobyte chunk are
read. If less than N terms are returned, this does not necessarily mean that the end of the file
has been reached.
The chunk function returns a tuple {Continuation2, Terms}, where Terms is a list of terms found in
the log. Continuation2 is yet another continuation which must be passed on to any subsequent calls
to chunk. With a series of calls to chunk it is possible to extract all terms from a log.
The chunk function returns a tuple {Continuation2, Terms, Badbytes} if the log is opened in read-
only mode and the read chunk is corrupt. Badbytes is the number of bytes in the file which were
found not to be Erlang terms in the chunk. Note also that the log is not repaired. When trying to
read chunks from a log opened in read-write mode, the tuple {corrupt_log_file, FileName} is
returned if the read chunk is corrupt.
chunk returns eof when the end of the log is reached, or {error, Reason} if an error occurs.
Should a wrap log file be missing, a message is output on the error log.
When chunk/2,3 is used with wrap logs, the returned continuation may or may not be valid in the
next call to chunk. This is because the log may wrap and delete the file into which the
continuation points. To make sure this does not happen, the log can be blocked during the search.
chunk_info(Continuation) -> InfoList | {error, Reason}
Types:
Continuation = continuation()
InfoList = [{node, Node :: node()}, ...]
Reason = {no_continuation, Continuation}
The chunk_info/1 function returns the following pair describing the chunk continuation returned by
chunk/2,3, bchunk/2,3, or chunk_step/3:
* {node, Node}. Terms are read from the disk log running on Node.
chunk_step(Log, Continuation, Step) ->
{ok, any()} | {error, Reason}
Types:
Log = log()
Continuation = start | continuation()
Step = integer()
Reason = no_such_log
| end_of_log
| {format_external, Log}
| {blocked_log, Log}
| {badarg, continuation}
| {file_error, file:filename(), file_error()}
The function chunk_step can be used in conjunction with chunk/2,3 and bchunk/2,3 to search through
an internally formatted wrap log. It takes as argument a continuation as returned by chunk/2,3,
bchunk/2,3, or chunk_step/3, and steps forward (or backward) Step files in the wrap log. The
continuation returned points to the first log item in the new current file.
If the atom start is given as continuation, a disk log to read terms from is chosen. A local or
distributed disk log on the current node is preferred to an individual distributed log on some
other node.
If the wrap log is not full because all files have not been used yet, {error, end_of_log} is
returned if trying to step outside the log.
close(Log) -> ok | {error, close_error_rsn()}
Types:
Log = log()
close_error_rsn() = no_such_log
| nonode
| {file_error, file:filename(), file_error()}
The function close/1 closes a local or distributed disk log properly. An internally formatted log
must be closed before the Erlang system is stopped, otherwise the log is regarded as unclosed and
the automatic repair procedure will be activated next time the log is opened.
The disk log process in not terminated as long as there are owners or users of the log. It should
be stressed that each and every owner must close the log, possibly by terminating, and that any
other process - not only the processes that have opened the log anonymously - can decrement the
users counter by closing the log. Attempts to close a log by a process that is not an owner are
simply ignored if there are no users.
If the log is blocked by the closing process, the log is also unblocked.
format_error(Error) -> io_lib:chars()
Types:
Error = term()
Given the error returned by any function in this module, the function format_error returns a
descriptive string of the error in English. For file errors, the function format_error/1 in the
file module is called.
inc_wrap_file(Log) -> ok | {error, inc_wrap_error_rsn()}
Types:
Log = log()
inc_wrap_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {blocked_log, log()}
| {halt_log, log()}
| {invalid_header, invalid_header()}
| {file_error,
file:filename(),
file_error()}
invalid_header() = term()
The inc_wrap_file/1 function forces the internally formatted disk log to start logging to the next
log file. It can be used, for instance, in conjunction with change_size/2 to reduce the amount of
disk space allocated by the disk log.
The owners that subscribe to notifications will normally receive a wrap message, but in case of an
error with a reason tag of invalid_header or file_error an error_status message will be sent.
info(Log) -> InfoList | {error, no_such_log}
Types:
Log = log()
InfoList = [dlog_info()]
dlog_info() = {name, Log :: log()}
| {file, File :: file:filename()}
| {type, Type :: dlog_type()}
| {format, Format :: dlog_format()}
| {size, Size :: dlog_size()}
| {mode, Mode :: dlog_mode()}
| {owners, [{pid(), Notify :: boolean()}]}
| {users, Users :: integer() >= 0}
| {status,
Status :: ok
| {blocked,
QueueLogRecords :: boolean()}}
| {node, Node :: node()}
| {distributed, Dist :: local | [node()]}
| {head,
Head :: none
| {head, term()}
| (MFA :: {atom(), atom(), list()})}
| {no_written_items,
NoWrittenItems :: integer() >= 0}
| {full, Full :: boolean}
| {no_current_bytes, integer() >= 0}
| {no_current_items, integer() >= 0}
| {no_items, integer() >= 0}
| {current_file, integer() >= 1}
| {no_overflows,
{SinceLogWasOpened :: integer() >= 0,
SinceLastInfo :: integer() >= 0}}
The info/1 function returns a list of {Tag, Value} pairs describing the log. If there is a disk
log process running on the current node, that log is used as source of information, otherwise an
individual distributed log on some other node is chosen, if such a log exists.
The following pairs are returned for all logs:
* {name, Log}, where Log is the name of the log as given by the open/1 option name.
* {file, File}. For halt logs File is the filename, and for wrap logs File is the base name.
* {type, Type}, where Type is the type of the log as given by the open/1 option type.
* {format, Format}, where Format is the format of the log as given by the open/1 option format.
* {size, Size}, where Size is the size of the log as given by the open/1 option size, or the
size set by change_size/2. The value set by change_size/2 is reflected immediately.
* {mode, Mode}, where Mode is the mode of the log as given by the open/1 option mode.
* {owners, [{pid(), Notify}]} where Notify is the value set by the open/1 option notify or the
function change_notify/3 for the owners of the log.
* {users, Users} where Users is the number of anonymous users of the log, see the open/1 option
linkto.
* {status, Status}, where Status is ok or {blocked, QueueLogRecords} as set by the functions
block/1,2 and unblock/1.
* {node, Node}. The information returned by the current invocation of the info/1 function has
been gathered from the disk log process running on Node.
* {distributed, Dist}. If the log is local on the current node, then Dist has the value local,
otherwise all nodes where the log is distributed are returned as a list.
The following pairs are returned for all logs opened in read_write mode:
* {head, Head}. Depending of the value of the open/1 options head and head_func or set by the
function change_header/2, the value of Head is none (default), {head, H} (head option) or
{M,F,A} (head_func option).
* {no_written_items, NoWrittenItems}, where NoWrittenItems is the number of items written to the
log since the disk log process was created.
The following pair is returned for halt logs opened in read_write mode:
* {full, Full}, where Full is true or false depending on whether the halt log is full or not.
The following pairs are returned for wrap logs opened in read_write mode:
* {no_current_bytes, integer() >= 0} is the number of bytes written to the current wrap log
file.
* {no_current_items, integer() >= 0} is the number of items written to the current wrap log
file, header inclusive.
* {no_items, integer() >= 0} is the total number of items in all wrap log files.
* {current_file, integer()} is the ordinal for the current wrap log file in the range
1..MaxNoFiles, where MaxNoFiles is given by the open/1 option size or set by change_size/2.
* {no_overflows, {SinceLogWasOpened, SinceLastInfo}}, where SinceLogWasOpened (SinceLastInfo) is
the number of times a wrap log file has been filled up and a new one opened or inc_wrap_file/1
has been called since the disk log was last opened (info/1 was last called). The first time
info/2 is called after a log was (re)opened or truncated, the two values are equal.
Note that the chunk/2,3, bchunk/2,3, and chunk_step/3 functions do not affect any value returned
by info/1.
lclose(Log) -> ok | {error, lclose_error_rsn()}
lclose(Log, Node) -> ok | {error, lclose_error_rsn()}
Types:
Log = log()
Node = node()
lclose_error_rsn() = no_such_log
| {file_error,
file:filename(),
file_error()}
The function lclose/1 closes a local log or an individual distributed log on the current node. The
function lclose/2 closes an individual distributed log on the specified node if the node is not
the current one. lclose(Log) is equivalent to lclose(Log, node()). See also close/1.
If there is no log with the given name on the specified node, no_such_log is returned.
log(Log, Term) -> ok | {error, Reason :: log_error_rsn()}
blog(Log, Bytes) -> ok | {error, Reason :: log_error_rsn()}
Types:
Log = log()
Term = term()
Bytes = bytes()
log_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {format_external, log()}
| {blocked_log, log()}
| {full, log()}
| {invalid_header, invalid_header()}
| {file_error, file:filename(), file_error()}
The log/2 and blog/2 functions synchronously append a term to a disk log. They return ok or
{error, Reason} when the term has been written to disk. If the log is distributed, ok is always
returned, unless all nodes are down. Terms are written by means of the ordinary write() function
of the operating system. Hence, there is no guarantee that the term has actually been written to
the disk, it might linger in the operating system kernel for a while. To make sure the item is
actually written to disk, the sync/1 function must be called.
The log/2 function is used for internally formatted logs, and blog/2 for externally formatted
logs. blog/2 can be used for internally formatted logs as well provided the binary was constructed
with a call to term_to_binary/1.
The owners that subscribe to notifications will be notified of an error with an error_status
message if the error reason tag is invalid_header or file_error.
log_terms(Log, TermList) ->
ok | {error, Resaon :: log_error_rsn()}
blog_terms(Log, BytesList) ->
ok | {error, Reason :: log_error_rsn()}
Types:
Log = log()
TermList = [term()]
BytesList = [bytes()]
log_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {format_external, log()}
| {blocked_log, log()}
| {full, log()}
| {invalid_header, invalid_header()}
| {file_error, file:filename(), file_error()}
The log_terms/2 and blog_terms/2 functions synchronously append a list of items to the log. The
benefit of using these functions rather than the log/2 and blog/2 functions is that of efficiency:
the given list is split into as large sublists as possible (limited by the size of wrap log
files), and each sublist is logged as one single item, which reduces the overhead.
The log_terms/2 function is used for internally formatted logs, and blog_terms/2 for externally
formatted logs. blog_terms/2 can be used for internally formatted logs as well provided the
binaries were constructed with calls to term_to_binary/1.
The owners that subscribe to notifications will be notified of an error with an error_status
message if the error reason tag is invalid_header or file_error.
open(ArgL) -> open_ret() | dist_open_ret()
Types:
ArgL = dlog_options()
dlog_options() = [dlog_option()]
dlog_option() = {name, Log :: log()}
| {file, FileName :: file:filename()}
| {linkto, LinkTo :: none | pid()}
| {repair, Repair :: true | false | truncate}
| {type, Type :: dlog_type}
| {format, Format :: dlog_format()}
| {size, Size :: dlog_size()}
| {distributed, Nodes :: [node()]}
| {notify, boolean()}
| {head, Head :: dlog_head_opt()}
| {head_func, MFA :: {atom(), atom(), list()}}
| {mode, Mode :: dlog_mode()}
open_ret() = ret() | {error, open_error_rsn()}
ret() = {ok, Log :: log()}
| {repaired,
Log :: log(),
{recovered, Rec :: integer() >= 0},
{badbytes, Bad :: integer() >= 0}}
dist_open_ret() =
{[{node(), ret()}], [{node(), {error, dist_error_rsn()}}]}
dist_error_rsn() = nodedown | open_error_rsn()
open_error_rsn() = no_such_log
| {badarg, term()}
| {size_mismatch,
CurrentSize :: dlog_size(),
NewSize :: dlog_size()}
| {arg_mismatch,
OptionName :: dlog_optattr(),
CurrentValue :: term(),
Value :: term()}
| {name_already_open, Log :: log()}
| {open_read_write, Log :: log()}
| {open_read_only, Log :: log()}
| {need_repair, Log :: log()}
| {not_a_log_file,
FileName :: file:filename()}
| {invalid_index_file,
FileName :: file:filename()}
| {invalid_header, invalid_header()}
| {file_error, file:filename(), file_error()}
| {node_already_open, Log :: log()}
dlog_optattr() = name
| file
| linkto
| repair
| type
| format
| size
| distributed
| notify
| head
| head_func
| mode
dlog_size() = infinity
| integer() >= 1
| {MaxNoBytes :: integer() >= 1,
MaxNoFiles :: integer() >= 1}
The ArgL parameter is a list of options which have the following meanings:
* {name, Log} specifies the name of the log. This is the name which must be passed on as a
parameter in all subsequent logging operations. A name must always be supplied.
* {file, FileName} specifies the name of the file which will be used for logged terms. If this
value is omitted and the name of the log is either an atom or a string, the file name will
default to lists:concat([Log, ".LOG"]) for halt logs. For wrap logs, this will be the base
name of the files. Each file in a wrap log will be called <base_name>.N, where N is an
integer. Each wrap log will also have two files called <base_name>.idx and <base_name>.siz.
* {linkto, LinkTo}. If LinkTo is a pid, that pid becomes an owner of the log. If LinkTo is none
the log records that it is used anonymously by some process by incrementing the users counter.
By default, the process which calls open/1 owns the log.
* {repair, Repair}. If Repair is true, the current log file will be repaired, if needed. As the
restoration is initiated, a message is output on the error log. If false is given, no
automatic repair will be attempted. Instead, the tuple {error, {need_repair, Log}} is returned
if an attempt is made to open a corrupt log file. If truncate is given, the log file will be
truncated, creating an empty log. Default is true, which has no effect on logs opened in read-
only mode.
* {type, Type} is the type of the log. Default is halt.
* {format, Format} specifies the format of the disk log. Default is internal.
* {size, Size} specifies the size of the log. When a halt log has reached its maximum size, all
attempts to log more items are rejected. The default size is infinity, which for halt implies
that there is no maximum size. For wrap logs, the Size parameter may be either a pair
{MaxNoBytes, MaxNoFiles} or infinity. In the latter case, if the files of an already existing
wrap log with the same name can be found, the size is read from the existing wrap log,
otherwise an error is returned. Wrap logs write at most MaxNoBytes bytes on each file and use
MaxNoFiles files before starting all over with the first wrap log file. Regardless of
MaxNoBytes, at least the header (if there is one) and one item is written on each wrap log
file before wrapping to the next file. When opening an existing wrap log, it is not necessary
to supply a value for the option Size, but any supplied value must equal the current size of
the log, otherwise the tuple {error, {size_mismatch, CurrentSize, NewSize}} is returned.
* {distributed, Nodes}. This option can be used for adding members to a distributed disk log.
The default value is [], which means that the log is local on the current node.
*
{notify, bool()}. If true, the owners of the log are notified when certain events occur in the
log. Default is false. The owners are sent one of the following messages when an event occurs:
* {disk_log, Node, Log, {wrap, NoLostItems}} is sent when a wrap log has filled up one of its
files and a new file is opened. NoLostItems is the number of previously logged items that
have been lost when truncating existing files.
* {disk_log, Node, Log, {truncated, NoLostItems}} is sent when a log has been truncated or
reopened. For halt logs NoLostItems is the number of items written on the log since the disk
log process was created. For wrap logs NoLostItems is the number of items on all wrap log
files.
* {disk_log, Node, Log, {read_only, Items}} is sent when an asynchronous log attempt is made
to a log file opened in read-only mode. Items is the items from the log attempt.
* {disk_log, Node, Log, {blocked_log, Items}} is sent when an asynchronous log attempt is made
to a blocked log that does not queue log attempts. Items is the items from the log attempt.
* {disk_log, Node, Log, {format_external, Items}} is sent when alog/2 or alog_terms/2 is used
for internally formatted logs. Items is the items from the log attempt.
* {disk_log, Node, Log, full} is sent when an attempt to log items to a wrap log would write
more bytes than the limit set by the size option.
* {disk_log, Node, Log, {error_status, Status}} is sent when the error status changes. The
error status is defined by the outcome of the last attempt to log items to a the log or to
truncate the log or the last use of sync/1, inc_wrap_file/1 or change_size/2. Status is one
of ok and {error, Error}, the former being the initial value.
* {head, Head} specifies a header to be written first on the log file. If the log is a wrap log,
the item Head is written first in each new file. Head should be a term if the format is
internal, and a deep list of bytes (or a binary) otherwise. Default is none, which means that
no header is written first on the file.
* {head_func, {M,F,A}} specifies a function to be called each time a new log file is opened. The
call M:F(A) is assumed to return {ok, Head}. The item Head is written first in each file. Head
should be a term if the format is internal, and a deep list of bytes (or a binary) otherwise.
* {mode, Mode} specifies if the log is to be opened in read-only or read-write mode. It defaults
to read_write.
The open/1 function returns {ok, Log} if the log file was successfully opened. If the file was
successfully repaired, the tuple {repaired, Log, {recovered, Rec}, {badbytes, Bad}} is returned,
where Rec is the number of whole Erlang terms found in the file and Bad is the number of bytes in
the file which were non-Erlang terms. If the distributed parameter was given, open/1 returns a
list of successful replies and a list of erroneous replies. Each reply is tagged with the node
name.
When a disk log is opened in read-write mode, any existing log file is checked for. If there is
none a new empty log is created, otherwise the existing file is opened at the position after the
last logged item, and the logging of items will commence from there. If the format is internal and
the existing file is not recognized as an internally formatted log, a tuple {error,
{not_a_log_file, FileName}} is returned.
The open/1 function cannot be used for changing the values of options of an already open log; when
there are prior owners or users of a log, all option values except name, linkto and notify are
just checked against the values that have been supplied before as option values to open/1,
change_header/2, change_notify/3 or change_size/2. As a consequence, none of the options except
name is mandatory. If some given value differs from the current value, a tuple {error,
{arg_mismatch, OptionName, CurrentValue, Value}} is returned. Caution: an owner's attempt to open
a log as owner once again is acknowledged with the return value {ok, Log}, but the state of the
disk log is not affected in any way.
If a log with a given name is local on some node, and one tries to open the log distributed on the
same node, then the tuple {error, {node_already_open, Log}} is returned. The same tuple is
returned if the log is distributed on some node, and one tries to open the log locally on the same
node. Opening individual distributed disk logs for the first time adds those logs to a (possibly
empty) distributed disk log. The option values supplied are used on all nodes mentioned by the
distributed option. Individual distributed logs know nothing about each other's option values, so
each node can be given unique option values by creating a distributed log with several calls to
open/1.
It is possible to open a log file more than once by giving different values to the option name or
by using the same file when distributing a log on different nodes. It is up to the user of the
disk_log module to ensure that no more than one disk log process has write access to any file, or
the the file may be corrupted.
If an attempt to open a log file for the first time fails, the disk log process terminates with
the EXIT message {{failed,Reason},[{disk_log,open,1}]}. The function returns {error, Reason} for
all other errors.
pid2name(Pid) -> {ok, Log} | undefined
Types:
Pid = pid()
Log = log()
The pid2name/1 function returns the name of the log given the pid of a disk log process on the
current node, or undefined if the given pid is not a disk log process.
This function is meant to be used for debugging only.
reopen(Log, File) -> ok | {error, reopen_error_rsn()}
reopen(Log, File, Head) -> ok | {error, reopen_error_rsn()}
breopen(Log, File, BHead) -> ok | {error, reopen_error_rsn()}
Types:
Log = log()
File = file:filename()
Head = term()
BHead = bytes()
reopen_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {blocked_log, log()}
| {same_file_name, log()}
| {invalid_index_file, file:filename()}
| {invalid_header, invalid_header()}
| {file_error,
file:filename(),
file_error()}
The reopen functions first rename the log file to File and then re-create a new log file. In case
of a wrap log, File is used as the base name of the renamed files. By default the header given to
open/1 is written first in the newly opened log file, but if the Head or the BHead argument is
given, this item is used instead. The header argument is used once only; next time a wrap log file
is opened, the header given to open/1 is used.
The reopen/2,3 functions are used for internally formatted logs, and breopen/3 for externally
formatted logs.
The owners that subscribe to notifications will receive a truncate message.
Upon failure to reopen the log, the disk log process terminates with the EXIT message
{{failed,Error},[{disk_log,Fun,Arity}]}, and other processes that have requests queued receive the
message {disk_log, Node, {error, disk_log_stopped}}.
sync(Log) -> ok | {error, sync_error_rsn()}
Types:
Log = log()
sync_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {blocked_log, log()}
| {file_error, file:filename(), file_error()}
The sync/1 function ensures that the contents of the log are actually written to the disk. This is
usually a rather expensive operation.
truncate(Log) -> ok | {error, trunc_error_rsn()}
truncate(Log, Head) -> ok | {error, trunc_error_rsn()}
btruncate(Log, BHead) -> ok | {error, trunc_error_rsn()}
Types:
Log = log()
Head = term()
BHead = bytes()
trunc_error_rsn() = no_such_log
| nonode
| {read_only_mode, log()}
| {blocked_log, log()}
| {invalid_header, invalid_header()}
| {file_error, file:filename(), file_error()}
The truncate functions remove all items from a disk log. If the Head or the BHead argument is
given, this item is written first in the newly truncated log, otherwise the header given to open/1
is used. The header argument is only used once; next time a wrap log file is opened, the header
given to open/1 is used.
The truncate/1,2 functions are used for internally formatted logs, and btruncate/2 for externally
formatted logs.
The owners that subscribe to notifications will receive a truncate message.
If the attempt to truncate the log fails, the disk log process terminates with the EXIT message
{{failed,Reason},[{disk_log,Fun,Arity}]}, and other processes that have requests queued receive
the message {disk_log, Node, {error, disk_log_stopped}}.
unblock(Log) -> ok | {error, unblock_error_rsn()}
Types:
Log = log()
unblock_error_rsn() = no_such_log
| nonode
| {not_blocked, log()}
| {not_blocked_by_pid, log()}
The unblock/1 function unblocks a log. A log can only be unblocked by the blocking process.
SEE ALSO
file(3erl), pg2(3erl), wrap_log_reader(3erl)