Provided by: aide-dynamic_0.16~a2.git20130520-2ubuntu0.1_amd64 
NAME
aide.conf - The configuration file for Advanced Intrusion Detection Environment
SYNOPSIS
aide.conf is the configuration file for Advanced Intrusion Detection Environment.
aide.conf contains the runtime configuration aide uses to initiailize or check the aide
database.
FILE FORMAT
aide.conf is similar in to Tripwire(tm)'s configuration file. With little effort tw.conf
can be converted to aide.conf.
aide.conf is case-sensitive. Leading and trailing whitespaces are ignored.
There are three types of lines in aide.conf. First there are the configuration lines which
are used to set configuration parameters and define/undefine variables. Second, there are
selection lines that are used to indicate which files are added to the database. Third,
macro lines define or undefine variables within the config file. Lines beginning with #
are ignored as comments.
CONFIG LINES
These lines have the format parameter=value. See URLS for a list of valid urls.
database
The url from which database is read. There can only be one of these lines. If there
are multiple database lines then the first is used. There is no valid default
value in the Debian packages!
database_out
The url to which the new database is written to. There can only be one of these
lines. If there are multiple database_out lines then the first is used. There is no
valid default value in the Debian packages!
database_new
The url from which the other database for --compare is read. There is no default
for this one.
database_attrs
The attributes of the (uncompressed) database files which are to be added to the
final report in verbose level 2 or higher. Only checksum attributes are supported.
To disable set database_attrs to 'E'. By default all compiled in checksums are
added to the report.
verbose
The level of messages that is output. This value can be 0-255 inclusive. This
parameter can only be given once. Value from the first occurence is used. If
--verbose or -V is used then the value from that is used. The default is 5. If
verbosity is 20 then additional report output is written when doing --check,
--update or --compare.
report_url
The url that the output is written to. There can be multiple instances of this
parameter. Output is written to all of them. The default is stdout.
report_base16
Whether to base16 encode the checksums in the report or not. Valid values are yes,
true, no and false. The default is to report checksums not in base16 but in base64
encoding.
report_detailed_init
Whether to report added files (verbose level >= 2) and their details (verbose level
>=6) in initialization mode or not. Valid values are yes, true, no and false. The
default is to not report added files or their details in init mode.
gzip_dbout
Whether the output to the database is gzipped or not. Valid values are yes,true,no
and false. The default is no. This option is available only if zlib support is
compiled in.
root_prefix
The prefix to strip from each file name in the file system before applying the
rules and writing to database. Aide removes a trailing slash from the prefix. The
default is no (an empty) prefix. This option has no effect in compare mode.
acl_no_symlink_follow
Whether to check ACLs for symlinks or not. Valid values are yes,true,no and false.
The default is to follow symlinks. This option is available only if acl support is
compiled in.
warn_dead_symlinks
Whether to warn about dead symlinks or not. Valid values are yes,true,no and false.
The default is not to warn about dead symlinks.
grouped
Whether to group the files in the report by added, removed and changed files or
not. Valid values are yes, true, no and false. The default is to group the files
in the report.
summarize_changes
Whether to summarize changes in the added, removed and changed files sections of
the report or not. Valid values are yes,true,no and false. The default is to
summarize the changes.
The general format is like the string YlZbpugamcinCAXSE, where Y is replaced by the
file-type (f for a regular file, d for a directory, L for a symbolic link, D for a
character device, B for a block device, F for a FIFO, s for a unix socket, | for a
Solaris door, ! if file type has changed and ? otherwise).
The Z is replaced as follows: A = means that the size has not changed, a < reports
a shrinked size and a > reports a grown size.
The other letters in the string are the actual letters that will be output if the
associated attribute for the item has been changed or a "." for no change, a "+" if
the attribute has been added, a "-" if it has been removed, a ":" if the attribute
is listed in ignore_list or a " " if the attribute has not been checked. The
exceptions to this are: (1) a newly created file replaces each letter with a "+",
and (2) a removed file replaces each letter with a "-".
The attribute that is associated with each letter is as follows:
o A l means that the link name has changed.
o A b means that the block count has changed.
o A p means that the permissions have changed.
o An u means that the uid has changed.
o A g means that the gid has changed.
o An a means that the access time has changed.
o A m means that the modification time has changed.
o A c means that the change time has changed.
o An i means that the inode has changed.
o A n means that the link count has changed.
o A C means that one or more checksums have changed.
The following letters are only available when explicitly enabled using configure:
o A A means that the access control list has changed.
o A X means that the extended attributes have changed.
o A S means that the SELinux attributes have changed.
o A E means that the file attributes on a second extended file system have
changed.
report_attributes
Special group definition that lists parameters which are always printed in the
final report for changed files.
ignore_list
Special group definition that lists parameters which are to be ignored from the
final report.
config_version
The value of config_version is printed in the report and also printed to the
database. This is for informational purposes only. It has no other functionality.
Group definitions
If the parameter is not one of the previous parameters then it is regarded as a
group definition. Value is then regarded as an expression. Expression is of the
following form.
<predefined group>| <expr> + <predefined group>
| <expr> - <predifined group>
See DEFAULT GROUPS for an explanation of default predefined groups. Note that this
is different from the way Tripwire(tm) does it.
There is also a special group named "ignore_list". The predefined -groups listed in
it are NOT displayed in the final report.
SELECTION LINES
aide supports three types of selection lines (regular, negative, equals) Lines beginning
with "/" are regular selection lines. Lines beginning with "=" are equals selection lines.
And lines beginning with "!" are negative selection lines. The string following the first
character is taken as a regular expression matching to a complete filename, including the
path. In a regular selection rule the "/" is included in the regular expression. Special
characters in your filenames can be escaped using two-digit URL encoding (for example, %20
to represent a space). Following the regular expression is a group definition as
explained above. See EXAMPLES and doc/aide.conf for examples.
More in-depth discussion of the selection algorithm can be found in the aide manual.
MACRO LINES
@@define VAR val
Define variable VAR to value val.
@@undef VAR
Undefine variable VAR.
@@ifdef VAR, @@ifndef VAR
@@ifdef begins an if statement. It must be terminated with an @@endif statement.
The lines between @@ifdef and @@endif are used if variable VAR is defined. If there
is an @@else statement then the part between @@ifdef and @@else is used is VAR is
defined otherwise the part between @@else and @@endif is used. @@ifndef reverses
the logic of @@ifdef statement but otherwise works similarly.
@@ifhost hostname, @@ifnhost hostname
@@ifhost works like @@ifdef only difference is that it checks whether hostname
equals the name of the host that aide is running on. hostname is the name of the
host without the domainname (hostname, not hostname.aide.org).
@@{VAR}
@@{VAR} is replaced with the value of the variable VAR. If variable VAR is not
defined an empty string is used. Unlike Tripwire(tm) @@VAR is NOT supported. One
special VAR is @@{HOSTNAME} which is substituted for the hostname of the current
system.
@@else Begins the else part of an if statement.
@@endif
Ends an if statement.
@@include VAR
Includes the file VAR. The content of the file is used as if it were inserted in
this part of the config file.
URLS
Urls can be one of the following. Input urls cannot be used as outputs and vice versa.
stdout
stderr Output is sent to stdout,stderr respectively.
stdin Input is read from stdin.
file://filename
Input is read from filename or output is written to filename.
fd:number
Input is read from filedescriptor number or output is written to number.
DEFAULT GROUPS
p: permissions
ftype: file type
i: inode
l: link name
n: number of links
u: user
g: group
s: size
b: block count
m: mtime
a: atime
c: ctime
S: check for growing size
I: ignore changed filename
ANF: allow new files
ARF: allow removed files
md5: md5 checksum
sha1: sha1 checksum
sha256: sha256 checksum
sha512: sha512 checksum
rmd160: rmd160 checksum
tiger: tiger checksum
haval: haval checksum
crc32: crc32 checksum
R: p+ftype+i+l+n+u+g+s+m+c+md5+X
L: p+ftype+i+l+n+u+g+X
E: Empty group
X: acl+selinux+xattrs+e2fsattrs (if groups are explicitly enabled)
>: Growing logfile p+ftype+l+u+g+i+n+S+X
And also the following if you have mhash support enabled
gost: gost checksum
whirlpool: whirlpool checksum
The following are available only when explicitly enabled using configure
acl: access control list
selinux: selinux attributes
xattrs: extended attributes
e2fsattrs: file attributes on a second extended file system
Please note that 'I' and 'c' are incompatible. When the name of a file is changed, it's
ctime is updated as well. When you put 'c' and 'I' in the same rule the, a changed ctime
is silently ignored.
When 'ANF' is used, new files are added to the new database, but are ignored in the
report.
When 'ARF' is used, files missing on disk are omitted from the new database, but are
ignored in the report.
EXAMPLES
/ R
This adds all files on your machine to the database. This is one line is a fully qualified
configuration file.
!/dev
This ignores the /dev directory structure.
=/tmp
Only /tmp is taken into the database. None of its children are added.
All=p+i+n+u+g+s+m+c+a+md5+sha1+tiger+rmd160
This line defines group All. It has all attributes and all md checksum functions. If you
absolutely want all digest functions then you should enable mhash support and add
+crc32+haval+gost to the end of the definition for All. Mhash support can only be enabled
at compile-time.
HINTS
=/foo p+i+l+n+u+g+s+m+c+md5
/foo/bar p+i+l+n+u+g+s+m+c+md5
This config adds all files under /foo because they match to regex /foo, which is
equivalent to /foo.* . What you probably want is:
=/foo$ p+i+l+n+u+g+s+m+c+md5
/foo/bar p+i+l+n+u+g+s+m+c+md5
Note that the following still works as expected because =/foo$ stop recuring of directory
/foo.
=/foo p+i+l+n+u+g+s+m+c+md5
In the following, the first is not allowed in AIDE. Use the latter instead.
/foo epug
/foo e+p+u+g
SEE ALSO
aide(1) http://www.cs.tut.fi/~rammer/aide/manual.html
DISCLAIMER
All trademarks are the property of their respective owners. No animals were harmed while
making this webpage or this piece of software.
aide.conf(5)