Provided by: wayv_0.3-5_amd64 
NAME
wayv.conf - configuration file for wayV
FILE LAYOUT
Different Gesture Matching Techniques
wayV has two different techniques for matching gestures, overtime this will expand.
The key to set is Think, of which there are two possible options:
1. Pda
It works well and can recognize over 40 different
gestures. It doesn't take into consideration the
direction the gesture is drawn in. Note this will
always find a matching gesture - even if its very
baldy wrong.
2. Pda & Vector
Like Pda above except it takes direction into
consideration. It works at the moment but further
work is required.
The direction is recorded in the Gesture sub-key
vector, which is comma delimited and set-able to
N, NE, E, SE, S, SW, W and NW
Configuring Gestures & Actions
The main, and required, configuration file is called "wayv.conf". When you read the words
"configuration file" from here on presume its wayv.conf.
In wayv.conf you'll primarily be interested in the Action sub-sections.
Every gesture has an action associated with it - to find out what action is associated
with what gesture have a look at a Gesture section - they start with the text "Gesture {"
and end with the text "}", e.g.
Gesture {
name = "A";
description = "A";
shape =
0, 0, 0, 0, 1, 0, 0, 0
, 0, 0, 0, 1, 1, 1, 0, 0
, 0, 0, 0, 1, 0, 1, 0, 0
, 0, 0, 1, 0, 0, 1, 0, 0
, 0, 1, 0, 0, 0, 0, 1, 0
, 0, 1, 0, 0, 0, 0, 1, 0
, 1, 1, 0, 0, 0, 0, 1, 1
, 1, 0, 0, 0, 0, 0, 0, 1
;
vector = NE, SE;
action = "Action A";
}
Every Gesture section has a sub-key called "action =", the text between the quotes (after
the equal) is the Action section associated with the gesture.
The vector sub-key is a new addition in 0.2.
Every action section starts with "Action {" and ends with "}", e.g.
Action {
name = "Action A";
process = exec "netscape";
match = "";
}
The action sub-key "name =" is how a gesture is matched with an action. When
Gesture.action = Action.name the action sub-key "process =" is used to carry out commands.
The action sub-key "process =" can compose of three different commands:
1. exec "COMMAND TO EXECUTE GOES HERE"
Starts a program
2. warp
Jumps the mouse back to the initial start position of
a gesture
3. delay "INTEGER OF SECONDS TO WAIT"
Wait so many seconds (useful when combined with sendkey)
4. kill
Kill the last command executed by wayV, this is handy
for canceling mismatched actions
5. sendkey "SPACE DELIMITED ALIAS(ES) FROM KEYMAP FILE"
Send a keypress to the active application or window
manager. Its the same as a key been pressed on the
keyboard.
An example of a composite keypress is:
sendkey "Control_L+c c"
(see HOWTO-wayv-keymap for more information)
and there can be multiple commands each separated by a comma, e.g. process = warp, exec
"xcalc", sendkey "o n e";
Activating Gesture Capture & Processing (was Mouse Activation)
When using wayV you need to press specific key and mouse button combinations to activate
gesture capture. Once a gesture is captured its checked to see if there are any associated
actions.
The key in the configuration file to setup what actives the gesture capture is the "Launch
=" key. It can have multiple parameters each seperated by a ",". The parameters are:
Mx (where x is any number greater than 0) = Which mouse
button must be held down when
drawing a gesture
SHIFT = Shift Key
LOCK = Caps Lock On/Off
CONTROL = Control Key
MOD1, MOD2, MOD3, MOD4, MOD5 = Other keys which can
be assigned with the
unix command 'xmodmap'.
An example of the setup wayV requires to begin gesture capture when mouse button 1 is held
down is:
Launch = "M1";
Another example to begin gesture capture when the Shift key and mouse button 2 is held
down is:
Launch = "M2,SHIFT";
A final example for when the Shift key, the Control Key and mouse button 3 is held down
is:
Launch = "M3,SHIFT,CONTROL";
Note: There CAN only be one mouse button used as part of activation, i.e. you cannot hold
down multiple mouse buttons but multiple keys pressed at once can be setup and used.
Controlling The Display
The display has been considerably improved and rewritten for version 0.2.
The structure that has to contain the keys for the display is called Pretty. We'll go
through each key in it in turn, note that some of the keys do interact with each other and
change the overall result:
1. display
This is the main key - controls what type of
gesture input window, if any, appears. When a
gesture input window appears the path followed
by the pointer through it should be shown.
Can be set to:
- yes
full screen input window that
pops up on gesture activation
- no
no input window but the gestures
are still capture on gesture
activation
- X, Y, WIDTH, HEIGHT
always on screen input window
X = Upper left hand corner
the input window starts
on
Y = Upper left hand corner
the input window starts
on
WIDTH = width of the input window
HEIGHT = height of the input window
2. managed
Turns on or off whether the window manager attempts
to control the input window. This is only relevant
for input windows that has the X, Y, WIDTH, HEIGHT
set.
- yes
input window is exactly like all the
other applications on your desktop
- no
the input window cannot be moved or
managed. This is handy for PDAs (personal
digital assistants)
3. color
Not yet usable
4. size
If an input window is used this controls the width
of the lines drawn by the gesture path.
5. feedback
A very handy feature which I think is quite handy. If
its on a text box appears in the middle of the screen
after a gesture is inputted.
The text box tells the user what Action is matched with
the inputed gesture.
- yes
Especially handy if used in combination
with a gesture for the kill command (see
above in "Configuration Gestures & Actions")
- no
no user feedback box
6. wait
Length of time the user feedback, if its on, appears
on the screen.
FURTHER INFORMATION
Right that should be enough to get people started. Have a look at the wayV website for
more information and at the mailing lists for further help.
AUTHOR
wayV was written by Mike Bennett (smoog at stressbunny dot com) with contributions from
various others.
URL
wayV - http://www.stressbunny.com/wayv
SEE ALSO
wayv(1)