Ubuntu Manpage: pam_pwquality - PAM module to perform password quality checking

Provided by: libpam-pwquality_1.2.3-1ubuntu1.1_amd64

NAME

       pam_pwquality - PAM module to perform password quality checking

SYNOPSIS

       pam_pwquality.so [...]

DESCRIPTION

This module can be plugged into the password stack of a given service to provide some
plug-in strength-checking for passwords. The code was originally based on pam_cracklib
module and the module is backwards compatible with its options.

The action of this module is to prompt the user for a password and check its strength
against a system dictionary and a set of rules for identifying poor choices.

The first action is to prompt for a single password, check its strength and then, if it is
considered strong, prompt for the password a second time (to verify that it was typed
correctly on the first occasion). All being well, the password is passed on to subsequent
modules to be installed as the new authentication token.

The strength checks works in the following manner: at first the Cracklib routine is called
to check if the password is part of a dictionary; if this is not the case an additional
set of strength checks is done. These checks are:

Palindrome
Is the new password a palindrome?

Case Change Only
Is the new password the the old one with only a change of case?

Similar
Is the new password too much like the old one? This is primarily controlled by one
argument, difok which is a number of character changes (inserts, removals, or
replacements) between the old and new password that are enough to accept the new
password. This defaults to 5 changes.

Simple
Is the new password too small? This is controlled by 6 arguments minlen,
maxclassrepeat, dcredit, ucredit, lcredit, and ocredit. See the section on the
arguments for the details of how these work and there defaults.

Rotated
Is the new password a rotated version of the old password?

Same consecutive characters
Optional check for same consecutive characters.

Too long monotonic character sequence
Optional check for too long monotonic character sequence.

Contains user name
Optional check whether the password contains the user's name in some form.

These checks are configurable either by use of the module arguments or by modifying the
/etc/security/pwquality.conf configuration file.

OPTIONS

debug
This option makes the module write information to syslog(3) indicating the behavior of
the module (this option does not write password information to the log file).

authtok_type=XXX
The default action is for the module to use the following prompts when requesting
passwords: "New UNIX password: " and "Retype UNIX password: ". The example word UNIX
can be replaced with this option, by default it is empty.

retry=N
Prompt user at most N times before returning with error. The default is 1.

difok=N
This argument will change the default of 5 for the number of changes in the new
password from the old password.

minlen=N
The minimum acceptable size for the new password (plus one if credits are not disabled
which is the default). In addition to the number of characters in the new password,
credit (of +1 in length) is given for each different kind of character (other, upper,
lower and digit). The default for this parameter is 9 . Note that there is a pair of
length limits also in Cracklib, which is used for dictionary checking, a "way too
short" limit of 4 which is hard coded in and a build time defined limit (6) that will
be checked without reference to minlen.

dcredit=N
(N >= 0) This is the maximum credit for having digits in the new password. If you
have less than or N digits, each digit will count +1 towards meeting the current
minlen value. The default for dcredit is 1 which is the recommended value for minlen
less than 10.

(N < 0) This is the minimum number of digits that must be met for a new password.

ucredit=N
(N >= 0) This is the maximum credit for having upper case letters in the new password.
If you have less than or N upper case letters each letter will count +1 towards
meeting the current minlen value. The default for ucredit is 1 which is the
recommended value for minlen less than 10.

(N < 0) This is the minimum number of upper case letters that must be met for a new
password.

lcredit=N
(N >= 0) This is the maximum credit for having lower case letters in the new password.
If you have less than or N lower case letters, each letter will count +1 towards
meeting the current minlen value. The default for lcredit is 1 which is the
recommended value for minlen less than 10.

(N < 0) This is the minimum number of lower case letters that must be met for a new
password.

ocredit=N
(N >= 0) This is the maximum credit for having other characters in the new password.
If you have less than or N other characters, each character will count +1 towards
meeting the current minlen value. The default for ocredit is 1 which is the
recommended value for minlen less than 10.

(N < 0) This is the minimum number of other characters that must be met for a new
password.

minclass=N
The minimum number of required classes of characters for the new password. The
default number is zero. The four classes are digits, upper and lower letters and other
characters. The difference to the credit check is that a specific class if of
characters is not required. Instead N out of four of the classes are required.

maxrepeat=N
Reject passwords which contain more than N same consecutive characters. The default
is 0 which means that this check is disabled.

maxsequence=N
Reject passwords which contain monotonic character sequences longer than N. The
default is 0 which means that this check is disabled. Examples of such sequence are
'12345' or 'fedcb'. Note that most such passwords will not pass the simplicity check
unless the sequence is only a minor part of the password.

maxclassrepeat=N
Reject passwords which contain more than N consecutive characters of the same class.
The default is 0 which means that this check is disabled.

gecoscheck=N
If nonzero, check whether the individual words longer than 3 characters from the
passwd GECOS field of the user are contained in the new password. The default is 0
which means that this check is disabled.

badwords=<list of words>
The words more than 3 characters long from this space separated list are individually
searched for and forbidden in the new password. By default the list is empty which
means that this check is disabled.

enforce_for_root
The module will return error on failed check even if the user changing the password is
root. This option is off by default which means that just the message about the failed
check is printed but root can change the password anyway. Note that root is not asked
for an old password so the checks that compare the old and new password are not
performed.

local_users_only
The module will not test the password quality for users that are not present in the
/etc/passwd file. The module still asks for the password so the following modules in
the stack can use the use_authtok option. This option is off by default.

use_authtok
This argument is used to force the module to not prompt the user for a new password
but use the one provided by the previously stacked password module.

dictpath=/path/to/dict
Path to the cracklib dictionaries.

MODULE TYPES PROVIDED

       Only the password module type is provided.

RETURN VALUES

       PAM_SUCCESS
           The new password passes all checks.

       PAM_AUTHTOK_ERR
           No  new password was entered, the username could not be determined or the new password
           fails the strength checks.

       PAM_AUTHTOK_RECOVERY_ERR
           The old password was not supplied by a previous stacked module or  got  not  requested
           from the user. The first error can happen if use_authtok is specified.

       PAM_SERVICE_ERR
           A internal error occurred.

EXAMPLES

       For  an example of the use of this module, we show how it may be stacked with the password
       component of pam_unix(8)

           #
           # These lines stack two password type modules. In this example the
           # user is given 3 opportunities to enter a strong password. The
           # "use_authtok" argument ensures that the pam_unix module does not
           # prompt for a password, but instead uses the one provided by
           # pam_pwquality.
           #
           passwd  password required       pam_pwquality.so retry=3
           passwd  password required       pam_unix.so use_authtok

       Another example (in the /etc/pam.d/passwd format) is for the case that you want to use md5
       password encryption:

           #%PAM-1.0
           #
           # These lines allow a md5 systems to support passwords of at least 14
           # bytes with extra credit of 2 for digits and 2 for others the new
           # password must have at least three bytes that are not present in the
           # old password
           #
           password  required pam_pwquality.so \
                          difok=3 minlen=15 dcredit= 2 ocredit=2
           password  required pam_unix.so use_authtok nullok md5

       And here is another example in case you don´t want to use credits:

           #%PAM-1.0
           #
           # These lines require the user to select a password with a minimum
           # length of 8 and with at least 1 digit number, 1 upper case letter,
           # and 1 other character
           #
           password  required pam_pwquality.so \
                          dcredit=-1 ucredit=-1 ocredit=-1 lcredit=0 minlen=8
           password  required pam_unix.so use_authtok nullok md5

AUTHORS

       Tomas Mraz <tmraz@redhat.com>
       Original author of pam_cracklib module Cristian Gafton <gafton@redhat.com>