NAME

       repro - repro SIP proxy server

SYNOPSIS

       repro [OPTIONS...]

DESCRIPTION

       repro  is an open-source, free SIP server. SIP is changing the way people communicate using the Internet.
       It is not only about making phone calls over the Net. The SIP protocol and its extensions defines the way
       of establishing, modifying and ending interactive sessions, no matter if they are voice, video, IM  or  a
       combination  of  them.  At  the  heart  of SIP architecture, there are certain services which needs to be
       provided at some place of the network.  repro provides  SIP  proxy,  registrar,  redirect,  and  identity
       services. These services are the foundation needed to run a SIP service.

OPTIONS

       -l, --log-type=cout|syslog|cerr
              Set  where  to send logging messages. The default cout sends the messages to standard output, cerr
              uses the standard error pipe.  With syslog the messages are send  to  the  system  log  using  the
              logging facility local6. See syslogd(8) or syslog.conf(5) for more information.

       -v, --log-level=STACK|DEBUG|INFO|WARNING|ALERT
              Set  the  minimum level a logging message needs to have in order to by written. The severity rises
              from left to right in the above order. The default is to log messages with level INFO or above.

       -r, --record-route=sip:example.com
              Activate record routing. The argument is the URI used in the Record-Route header field.

       --udp=5060
              Specify the port to use for the UDP transport. Set to 0 to turn UDP off. Defaults to port 5060.

       --tcp=5060
              Specify the port to use for the TCP transport. Set to 0 to turn TCP off. Defaults to port 5060.

       -t, --tls-domain=example.com
              Act as a TLS server for specified domain.

       --tls=5061
              Set the port to use for the TLS transport. Set to 0 to turn TLS off.  Defaults to port 5061.

       --dtls=0
              Set the port to use for the DTLS transport. Set to 0 to turn DTLS off which is the default.

       --enable-cert-server
              Run a cert server.

       -c, --cert-path=STRING
              Set the path for certificates. Defaults to ~/.sipCerts.

       --enable-v6
              Enable IPv6.

       --disable-v4
              Disable IPv4.

       --disable-auth
              Disable DIGEST challenges for certain SIP requests.

       --disable-web-auth
              Disable authentication for the web administration server.

       --disable-reg
              Disable the registrar.

       -i, --interfaces=sip:10.1.1.1:5065;transport=tls
              Specify interfaces to add transports to. Each transport is given as a SIP-URI with the IP  address
              and  port  of  the  local interface as the hostport part and the transport protocol as a transport
              parameter.  Several transports are separated by a comma.

              For   example,   to   set   up   two   transports,   one   for   TLS   and   one   for   UDP   use
              sip:192.168.1.200:5060;transport=tls,sip:192.168.1.200:5060;transport=udp

       -d, --domains=example.com,foo.com
              Specify the list of domains this proxy is authorative for separated by comma.

       -R, --route=sip:p1.example.com,sip:p2.example.com
              Specify  a  route  set  where  all  requests this proxy is authorative for are sent to. Using this
              option overides the routes set through the web interface.

       --reqChainName=STRING
              Name of request chain used for  processing  requests.  Currently,  the  only  chain  available  is
              default.

       --http=5080
              Specify the port used by the HTTP server. Defaults to 5080.

       --recursive-redirect
              Enable to handle of 3xx responses in the proxy.

       --q-value
              Enable  q-value  processing. The q-value can be given in registrations and is used by the location
              server to order forwarding for multiple registrations.  Without this option a request is forked to
              all registrations.

       --q-value-behavior=FULL_SEQUENTIAL|EQUAL_Q_PARALLEL|FULL_PARALLEL
              Specify forking behavior if --q-value is given.  With FULL_SEQUENTIAL one target is  called  after
              another  in the order of their q values. Using EQUAL_Q_PARALLEL (the default), the request is sent
              in batches of all registrations with the same q value. The batches are  again  ordered  by  the  q
              value.  FULL_PARALLEL causes the request to be sent in parallel to all registrations.

       --q-value-cancel-btw-fork-groups
              If   given,   groups   of   parallel  forks  are  canceled  after  the  period  specified  by  the
              --q-value-ms-before-cancel option if no response was received.

       --q-value-wait-for-terminate-btw-fork-groups
              If given, the proxy waits for groups of parallel forks to terminate before a new group is started.
              Otherwise, the next group is started once the waiting time has passed.

       --q-value-ms-between-fork-groups=INT
              Specify the number of milliseconds to wait for a response from a group of  parallel  forks  before
              starting another group.

       --q-value-ms-before-cancel=INT
              Specify  the  number  of  milliseconds  to wait before cancelling a group of parallel forks if the
              --q-value-cancel-btw-fork-groups option is given.

       -e, --enum-suffix=e164.arpa
              Specify enum suffix to search.

       -b, --allow-bad-reg
              Allow To tag in registrations.

       --timer-C=180
              Specify the length of timer C in sec which specifies the time a proxy waits  before  generating  a
              timeout response. Set to 0 or a negative value to turn timer C of completely.

       --admin-password=STRING
              Set the web administrator password.

       Help options:

       -?, --help
              Show a help message.

       --usage
              Display brief usage message.

       --version
              Display the version information.

SEE ALSO

       Repro web site at http://www.sipfoundry.org/repro/

                                                  February 2006                                         repro(8)