Provided by: wireshark-common_2.6.6-1~ubuntu14.04.0_amd64 bug

NAME

       editcap - Edit and/or translate the format of capture files

SYNOPSIS

       editcap [ -a <frame:comment> ] [ -A <start time> ] [ -B <stop time> ]
       [ -c <packets per file> ] [ -C [offset:]<choplen> ] [ -E <error probability> ]
       [ -F <file format> ] [ -h ] [ -i <seconds per file> ] [ -o <change offset> ] [ -L ] [ -r ]
       [ -s <snaplen> ] [ -S <strict time adjustment> ] [ -t <time adjustment> ]
       [ -T <encapsulation type> ] [ -v ] infile outfile [ packet#[-packet#] ... ]

       editcap  -d  |  -D <dup window>  |  -w <dup time window>  [ -v ] [ -I <bytes to ignore> ]
       infile outfile

       editcap [ -V ]

DESCRIPTION

       Editcap is a program that reads some or all of the captured packets from the infile,
       optionally converts them in various ways and writes the resulting packets to the capture
       outfile (or outfiles).

       By default, it reads all packets from the infile and writes them to the outfile in pcapng
       file format.

       An optional list of packet numbers can be specified on the command tail; individual packet
       numbers separated by whitespace and/or ranges of packet numbers can be specified as
       start-end, referring to all packets from start to end.  By default the selected packets
       with those numbers will not be written to the capture file.  If the -r flag is specified,
       the whole packet selection is reversed; in that case only the selected packets will be
       written to the capture file.

       Editcap can also be used to remove duplicate packets.  Several different options (-d, -D
       and -w) are used to control the packet window or relative time window to be used for
       duplicate comparison.

       Editcap can be used to assign comment strings to frame numbers.

       Editcap is able to detect, read and write the same capture files that are supported by
       Wireshark.  The input file doesn't need a specific filename extension; the file format and
       an optional gzip compression will be automatically detected.  Near the beginning of the
       DESCRIPTION section of wireshark(1) or
       <https://www.wireshark.org/docs/man-pages/wireshark.html> is a detailed description of the
       way Wireshark handles this, which is the same way Editcap handles this.

       Editcap can write the file in several output formats. The -F flag can be used to specify
       the format in which to write the capture file; editcap -F provides a list of the available
       output formats.

OPTIONS

       -a  <framenum:comment>
           For the specificed frame number, assign the given comment string.  Can be repeated for
           multiple frames.  Quotes should be used with comment strings that include spaces.

       -A  <start time>
           Saves only the packets whose timestamp is on or after start time.  The time is given
           in the following format YYYY-MM-DD HH:MM:SS

       -B  <stop time>
           Saves only the packets whose timestamp is before stop time.  The time is given in the
           following format YYYY-MM-DD HH:MM:SS

       -c  <packets per file>
           Splits the packet output to different files based on uniform packet counts with a
           maximum of <packets per file> each. Each output file will be created with a suffix
           -nnnnn, starting with 00000. If the specified number of packets is written to the
           output file, the next output file is opened. The default is to use a single output
           file.

       -C  [offset:]<choplen>
           Sets the chop length to use when writing the packet data. Each packet is chopped by
           <choplen> bytes of data. Positive values chop at the packet beginning while negative
           values chop at the packet end.

           If an optional offset precedes the <choplen>, then the bytes chopped will be offset
           from that value. Positive offsets are from the packet beginning, while negative
           offsets are from the packet end.

           This is useful for chopping headers for decapsulation of an entire capture, removing
           tunneling headers, or in the rare case that the conversion between two file formats
           leaves some random bytes at the end of each packet. Another use is for removing vlan
           tags.

           NOTE: This option can be used more than once, effectively allowing you to chop bytes
           from up to two different areas of a packet in a single pass provided that you specify
           at least one chop length as a positive value and at least one as a negative value.
           All positive chop lengths are added together as are all negative chop lengths.

       -d  Attempts to remove duplicate packets.  The length and MD5 hash of the current packet
           are compared to the previous four (4) packets.  If a match is found, the current
           packet is skipped.  This option is equivalent to using the option -D 5.

       -D  <dup window>
           Attempts to remove duplicate packets.  The length and MD5 hash of the current packet
           are compared to the previous <dup window> - 1 packets.  If a match is found, the
           current packet is skipped.

           The use of the option -D 0 combined with the -v option is useful in that each packet's
           Packet number, Len and MD5 Hash will be printed to standard out.  This verbose output
           (specifically the MD5 hash strings) can be useful in scripts to identify duplicate
           packets across trace files.

           The <dup window> is specified as an integer value between 0 and 1000000 (inclusive).

           NOTE: Specifying large <dup window> values with large tracefiles can result in very
           long processing times for editcap.

       -E  <error probability>
           Sets the probability that bytes in the output file are randomly changed.  Editcap uses
           that probability (between 0.0 and 1.0 inclusive) to apply errors to each data byte in
           the file.  For instance, a probability of 0.02 means that each byte has a 2% chance of
           having an error.

           This option is meant to be used for fuzz-testing protocol dissectors.

       -F  <file format>
           Sets the file format of the output capture file.  Editcap can write the file in
           several formats, editcap -F provides a list of the available output formats. The
           default is the pcapng format.

       -h  Prints the version and options and exits.

       -i  <seconds per file>
           Splits the packet output to different files based on uniform time intervals using a
           maximum interval of <seconds per file> each. Each output file will be created with a
           suffix -nnnnn, starting with 00000. If packets for the specified time interval are
           written to the output file, the next output file is opened. The default is to use a
           single output file.

       -I  <bytes to ignore>
           Ignore the specified number of bytes at the beginning of the frame during MD5 hash
           calculation, unless the frame is too short, then the full frame is used.  Useful to
           remove duplicated packets taken on several routers (different mac addresses for
           example) e.g. -I 26 in case of Ether/IP will ignore ether(14) and IP header(20 - 4(src
           ip) - 4(dst ip)).  The default value is 0.

       -L  Adjust the original frame length accordingly when chopping and/or snapping (in
           addition to the captured length, which is always adjusted regardless of whether -L is
           specified or not).  See also -C <choplen> and -s <snaplen>.

       -o  <change offset>
           When used in conjunction with -E, skip some bytes from the beginning of the packet
           from being changed. In this way some headers don't get changed, and the fuzzer is more
           focused on a smaller part of the packet. Keeping a part of the packet fixed the same
           dissector is triggered, that make the fuzzing more precise.

       -r  Reverse the packet selection.  Causes the packets whose packet numbers are specified
           on the command line to be written to the output capture file, instead of discarding
           them.

       -s  <snaplen>
           Sets the snapshot length to use when writing the data.  If the -s flag is used to
           specify a snapshot length, packets in the input file with more captured data than the
           specified snapshot length will have only the amount of data specified by the snapshot
           length written to the output file.

           This may be useful if the program that is to read the output file cannot handle
           packets larger than a certain size (for example, the versions of snoop in Solaris
           2.5.1 and Solaris 2.6 appear to reject Ethernet packets larger than the standard
           Ethernet MTU, making them incapable of handling gigabit Ethernet captures if jumbo
           packets were used).

       -S  <strict time adjustment>
           Time adjust selected packets to ensure strict chronological order.

           The <strict time adjustment> value represents relative seconds specified as
           [-]seconds[.fractional seconds].

           As the capture file is processed each packet's absolute time is possibly adjusted to
           be equal to or greater than the previous packet's absolute timestamp depending on the
           <strict time adjustment> value.

           If <strict time adjustment> value is 0 or greater (e.g. 0.000001) then only packets
           with a timestamp less than the previous packet will adjusted.  The adjusted timestamp
           value will be set to be equal to the timestamp value of the previous packet plus the
           value of the <strict time adjustment> value.  A <strict time adjustment> value of 0
           will adjust the minimum number of timestamp values necessary to ensure that the
           resulting capture file is in strict chronological order.

           If <strict time adjustment> value is specified as a negative value, then the timestamp
           values of all packets will be adjusted to be equal to the timestamp value of the
           previous packet plus the absolute value of the <lt>strict time adjustment<gt> value. A
           <strict time adjustment> value of -0 will result in all packets having the timestamp
           value of the first packet.

           This feature is useful when the trace file has an occasional packet with a negative
           delta time relative to the previous packet.

       -t  <time adjustment>
           Sets the time adjustment to use on selected packets.  If the -t flag is used to
           specify a time adjustment, the specified adjustment will be applied to all selected
           packets in the capture file.  The adjustment is specified as [-]seconds[.fractional
           seconds].  For example, -t 3600 advances the timestamp on selected packets by one hour
           while -t -0.5 reduces the timestamp on selected packets by one-half second.

           This feature is useful when synchronizing dumps collected on different machines where
           the time difference between the two machines is known or can be estimated.

       -T  <encapsulation type>
           Sets the packet encapsulation type of the output capture file.  If the -T flag is used
           to specify an encapsulation type, the encapsulation type of the output capture file
           will be forced to the specified type.  editcap -T provides a list of the available
           types. The default type is the one appropriate to the encapsulation type of the input
           capture file.

           Note: this merely forces the encapsulation type of the output file to be the specified
           type; the packet headers of the packets will not be translated from the encapsulation
           type of the input capture file to the specified encapsulation type (for example, it
           will not translate an Ethernet capture to an FDDI capture if an Ethernet capture is
           read and '-T fddi' is specified). If you need to remove/add headers from/to a packet,
           you will need od(1)/text2pcap(1).

       -v  Causes editcap to print verbose messages while it's working.

           Use of -v with the de-duplication switches of -d, -D or -w will cause all MD5 hashes
           to be printed whether the packet is skipped or not.

       -V  Print the version and exit.

       -w  <dup time window>
           Attempts to remove duplicate packets.  The current packet's arrival time is compared
           with up to 1000000 previous packets.  If the packet's relative arrival time is less
           than or equal to the <dup time window> of a previous packet and the packet length and
           MD5 hash of the current packet are the same then the packet to skipped.  The duplicate
           comparison test stops when the current packet's relative arrival time is greater than
           <dup time window>.

           The <dup time window> is specified as seconds[.fractional seconds].

           The [.fractional seconds] component can be specified to nine (9) decimal places
           (billionths of a second) but most typical trace files have resolution to six (6)
           decimal places (millionths of a second).

           NOTE: Specifying large <dup time window> values with large tracefiles can result in
           very long processing times for editcap.

           NOTE: The -w option assumes that the packets are in chronological order.  If the
           packets are NOT in chronological order then the -w duplication removal option may not
           identify some duplicates.

EXAMPLES

       To see more detailed description of the options use:

           editcap -h

       To shrink the capture file by truncating the packets at 64 bytes and writing it as Sun
       snoop file use:

           editcap -s 64 -F snoop capture.pcapng shortcapture.snoop

       To delete packet 1000 from the capture file use:

           editcap capture.pcapng sans1000.pcapng 1000

       To limit a capture file to packets from number 200 to 750 (inclusive) use:

           editcap -r capture.pcapng small.pcapng 200-750

       To get all packets from number 1-500 (inclusive) use:

           editcap -r capture.pcapng first500.pcapng 1-500

       or

           editcap capture.pcapng first500.pcapng 501-9999999

       To exclude packets 1, 5, 10 to 20 and 30 to 40 from the new file use:

           editcap capture.pcapng exclude.pcapng 1 5 10-20 30-40

       To select just packets 1, 5, 10 to 20 and 30 to 40 for the new file use:

           editcap -r capture.pcapng select.pcapng 1 5 10-20 30-40

       To remove duplicate packets seen within the prior four frames use:

           editcap -d capture.pcapng dedup.pcapng

       To remove duplicate packets seen within the prior 100 frames use:

           editcap -D 101 capture.pcapng dedup.pcapng

       To remove duplicate packets seen equal to or less than 1/10th of a second:

           editcap -w 0.1 capture.pcapng dedup.pcapng

       To display the MD5 hash for all of the packets (and NOT generate any real output file):

           editcap -v -D 0 capture.pcapng /dev/null

       or on Windows systems

           editcap -v -D 0 capture.pcapng NUL

       To advance the timestamps of each packet forward by 3.0827 seconds:

           editcap -t 3.0827 capture.pcapng adjusted.pcapng

       To ensure all timestamps are in strict chronological order:

           editcap -S 0 capture.pcapng adjusted.pcapng

       To introduce 5% random errors in a capture file use:

           editcap -E 0.05 capture.pcapng capture_error.pcapng

       To remove vlan tags from all packets within an Ethernet-encapsulated capture file, use:

           editcap -L -C 12:4 capture_vlan.pcapng capture_no_vlan.pcapng

       To chop both the 10 byte and 20 byte regions from the following 75 byte packet in a single
       pass, use any of the 8 possible methods provided below:

           <--------------------------- 75 ---------------------------->

           +---+-------+-----------+---------------+-------------------+
           | 5 |   10  |     15    |       20      |         25        |
           +---+-------+-----------+---------------+-------------------+

           1) editcap -C 5:10 -C -25:-20 capture.pcapng chopped.pcapng
           2) editcap -C 5:10 -C 50:-20 capture.pcapng chopped.pcapng
           3) editcap -C -70:10 -C -25:-20 capture.pcapng chopped.pcapng
           4) editcap -C -70:10 -C 50:-20 capture.pcapng chopped.pcapng
           5) editcap -C 30:20 -C -60:-10 capture.pcapng chopped.pcapng
           6) editcap -C 30:20 -C 15:-10 capture.pcapng chopped.pcapng
           7) editcap -C -45:20 -C -60:-10 capture.pcapng chopped.pcapng
           8) editcap -C -45:20 -C 15:-10 capture.pcapng chopped.pcapng

       To add comment strings to the first 2 input frames, use:

           editcap -a "1:1st frame" -a 2:Second capture.pcapng capture-comments.pcapng

SEE ALSO

       pcap(3), wireshark(1), tshark(1), mergecap(1), dumpcap(1), capinfos(1), text2pcap(1),
       od(1), pcap-filter(7) or tcpdump(8)

NOTES

       Editcap is part of the Wireshark distribution.  The latest version of Wireshark can be
       found at <https://www.wireshark.org>.

       HTML versions of the Wireshark project man pages are available at:
       <https://www.wireshark.org/docs/man-pages>.

AUTHORS

         Original Author
         -------- ------
         Richard Sharpe           <sharpe[AT]ns.aus.com>

         Contributors
         ------------
         Guy Harris               <guy[AT]alum.mit.edu>
         Ulf Lamping              <ulf.lamping[AT]web.de>