Provided by: fhist_1.18-1_amd64 
NAME
fcomp - file compare
SYNOPSIS
fcomp [ option... ] filename1 filename2
fcomp -Help
fcomp -VERSion
DESCRIPTION
The fcomp program is used to compare text files, similar to the diff(1) program. Its
advantage is that it always produces minimal differences, and so will never mis‐sync when
comparing files. Its disadvantage is that it runs slower due to the extra work required
to produce optimal differences. However, for files differing by less than a few thousand
lines, its performance is adequate. The algorithms used by this utility are also used by
the fhist(1) program in order to produce the edit history.
To compare file old to file new, the command:
fcomp old new
would be used. This gives the differences involved in converting from file old to file
new. This is analogous to the use of the cp(1) command. Either the old or new file may
be a directory, in which case the comparison is done to the file in the directory with the
same name as the other file. An error is given if old and new are both directories.
OPTIONS
The following options are understood:
-BINary This option may be used to compare binary files on a byte‐for‐byte basis. (Each
byte is treated as a “line” by the algorithm.) Byte values are displayed in
hexadecimal, as are the addresses. Note: this is different behaviour to the
fhist(1) option of the same name.
-No_BINary
This option may be used to avoid comparing binary files. A warnign will be
prointed on the standard error, but the program will report success without
printing andy other output.
-Blank
Ignore blank lines in the input files.
-Context number
This specifies the number of lines of "context" which is displayed. This shows
the specified number of lines before and after the actual lines being changed.
This is useful to locate and identify the line which is actually being changed,
when there are many identical copies of the line in the file.
-Edit
Output an edit script which is machine readable.
-Failures number
This stops the comparison if the number of changes exceeds the specified number.
Each change is a delete or insert of a single line. This is useful when you are
not interested in the results when the files are totally different. Another use
is a quick check to see if two files are identical, by using a value of zero.
-Help
Give some help on how to use the fcomp program.
-Join number
This merges together lines which have changed, if they are separated by up to the
specified number of unchanged lines. This makes a change look bigger, but reduces
the "choppiness" of the output by showing fewer regions being changed. This is
particularly effective to suppress worthless matchings of single blank lines or
comment beginning and ending lines. A useful value for this option is 3 or so.
-Matching
Output matching lines, rather then changed lines.
-Number
This outputs the line numbers at the left edge of the output. This isn't normally
needed, since the line numbers are displayed in the comment line preceding the
lines being displayed. Not outputting the line numbers prevents the terminal from
needlessly scrolling for long lines.
-Output filename
Send the output to this file, rather than the standard output.
-Quiet
Output only a quick summary of changes needed.
-Spaces
This option ignores differences in the number of spaces in the two lines. That
is, two or more adjacent spaces are handled as a single space. Spaces at the
beginning or end of a line are totally ignored.
-Upcase
Uppercase lines before comparing.
-VERSion
Show what version of fcomp is running.
-What
This outputs all of both files together, showing what happened to each line of the
first file in order to change to the line in the second file. This output is in
"change bar" format, where inserted lines begin with |+, deleted lines begin with
|−, and unchanged lines begin with spaces. The presence of the vertical bar makes
it easy to search for the changed lines.
All options may be abbreviated; the abbreviation is documented as the upper case letters,
all lower case letters and underscores (_) are optional. You must use consecutive
sequences of optional letters.
All options are case insensitive, you may type them in upper case or lower case or a
combination of both, case is not important.
For example: the arguments "-help, "-HELP" and "-h" are all interpreted to mean the -Help
option. The argument "-hlp" will not be understood, because consecutive optional
characters were not supplied.
Options and other command line arguments may be mixed arbitrarily on the command line.
The GNU long option names are understood. Since all option names for fcomp are long, this
means ignoring the extra leading '-'. The "-option=value" convention is also understood.
FILE NAME EXPANSION
As a convenience, if a pathname begins with a period and a environment variable exists
with that name, then the value of the environment variable will be used as the actual
pathname. For example, if a environment variable of .FOO has the value
this.is.a.long.name, then the command
fcomp -o .FOO
is actually equivilant to the command
fcomp -o this.is.a.long.name
If you want to prevent the expansion of a pathname which begins with a period, then you
can use an alternate form for the pathname, as in:
fcomp -o ./.FOO
BINARY FILES
In general, fcomp can handle all text files you throw at it, even international text with
unusual encodings. However, fcomp is unable to cope elegantly with files which contain
the NUL character.
The fcomp(1) program simply prints a warning, and continues, you need to know that it
converts NUL characters into an 0x80 value before performing the comparison.
The fmerge(1) program also converts the NUL character to an 0x80 value before merging,
after a warning, and any output file will contain this value, rather than the original NUL
character.
The fhist(1) program, however, generates a fatal error if any input file contains NUL
characters. This is intended to protect your source files for unintentional corruption.
Use -BINary for files which absolutely must contain NUL characters.
EXIT STATUS
The fcomp program will exit with a status of 1 on any error. The fcomp program will only
exit with a status of 0 if there are no errors.
REFERENCES
This program is based on the algorithm in
An O(ND) Difference Algorithm and Its Variations, Eugene W. Myers, TR 85‐6,
10‐April‐1985, Department of Computer Science, The University of Arizona, Tuscon,
Arizona 85721.
See also:
A File Comparison Program, Webb Miller and Eugene W. Myers, Software Practice and
Experience, Volume 15, No. 11, November 1985.
COPYRIGHT
fcomp version 1.18.D001
Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005, 2006, 2008, 2009 Peter Miller;
This program is derived from a work
Copyright (C) 1990 David I. Bell.
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program.
If not, see <http://www.gnu.org/licenses/>.
AUTHORS
Peter Miller Web: http://miller.emu.id.au/pmiller/
/\/\* E‐Mail: pmiller@opensource.org.au
David I. Bell Web: http://www.canb.auug.org.au/~dbell
E‐Mail: dbell@canb.auug.org.au