Ubuntu Manpage: powerman - power on/off nodes

NAME

       powerman - power on/off nodes

SYNOPSIS

       pm [-options] -action [targets] [-action [targets] ...]

DESCRIPTION

       powerman  provides  power  management in a data center or compute cluster environment.  It
       performs operations such as power  on,  power  off,  and  power  cycle  via  remote  power
       controller  (RPC)  devices.   Target  hostnames  are  mapped  to  plugs  on RPC devices in
       powerman.conf(5).

OPTIONS

-1, --on targets
Power ON targets.

-0, --off targets
Power OFF targets.

-c, --cycle targets
Power cycle targets.

-r, --reset targets
Assert hardware reset for targets (if implemented by RPC).

-f, --flash targets
Turn beacon ON for targets (if implemented by RPC).

-u, --unflash targets
Turn beacon OFF for targets (if implemented by RPC).

-l, --list
List available targets. If possible, output will be compressed into a host range
(see TARGET SPECIFICATION below).

-q, --query-all
Query plug status of all targets. Status is not cached; each time this option is
used, powermand queries the appropriate RPC's. Targets connected to RPC's that
could not be contacted (e.g. due to network failure) are reported as status
"unknown". If possible, output will be compressed into host ranges.

-Q, --query targets
Query plug status of specific targets.

-n, --soft-all
Query soft power status of all targets (if implemented by RPC). In this context, a
node in the OFF state could be ON at the plug but operating in standby power mode.

-N, --soft targets
Query soft power status of specific targets (if implemented by RPC).

-b, --beacon-all
Query beacon status of all targets (if implemented by RPC).

-B, --beacon targets
Query beacon status of specific targets (if implemented by RPC).

-t, --temp-all
Query node temperature of all targets (if implemented by RPC). Temperature
information is not interpreted by powerman and is reported as received from the RPC
on one line per target, prefixed by target name.

-P, --temp targets
Query node temperature of specific targets (if implemented by RPC).

-h, --help
Display option summary.

-L, --license
Show powerman license information.

-h, --server-host host[:port]
Connect to a powerman daemon on non-default host and optionally port.

-V, --version
Display the powerman version number and exit.

-D, --device
Displays RPC status information. If targets are specified, only RPC's matching the
target list are displayed.

-T, --telemetry
Causes RPC telemetry information to be displayed as commands are processed. Useful
for debugging device scripts.

-x, --exprange
Expand host ranges in query responses.

-g, --genders
If configured with the genders(3) package, this option tells powerman that targets
are genders attributes that map to node names rather than the node names
themselves.

TARGET SPECIFICATION

       powerman target hostnames may be specified as comma separated or space separated hostnames
       or host ranges.  Host ranges are of the general form: prefix[n-m,l-k,...], where n < m and
       l  <  k,  etc., This form should not be confused with regular expression character classes
       (also denoted by ``[]''). For example, foo[19] does not represent foo1 or foo9, but rather
       represents a degenerate range: foo19.

       This  range  syntax  is  meant  only  as  a convenience on clusters with a prefixNN naming
       convention and specification of ranges should not be  considered  necessary  --  the  list
       foo1,foo9 could be specified as such, or by the range foo[1,9].

       Some examples of powerman targets follows:

       Power on hosts bar,baz,foo01,foo02,...,foo05
           powerman --on bar baz foo[01-05]

       Power on hosts bar,foo7,foo9,foo10
           powerman --on bar,foo[7,9-10]

       Power on foo0,foo4,foo5
           powerman --on foo[0,4-5]

       As  a  reminder  to  the reader, some shells will interpret brackets ([ and ]) for pattern
       matching.  Depending on your shell, it may be necessary to  enclose  ranged  lists  within
       quotes.  For example, in tcsh, the last example above should be executed as:
           powerman --on "foo[0,4-5]"

FILES

       /usr/bin/powerman
       /usr/bin/pm

ORIGIN

       PowerMan  was  originally  developed  by  Andrew  Uselton  on LLNL's Linux clusters.  This
       software is open source and distributed under the terms of the GNU GPL.