Provided by: xlbiff_4.1-7_amd64 
NAME
xlbiff - mailbox message previewer for X
SYNOPSIS
xlbiff [ -option ... ]
DESCRIPTION
The xlbiff program lurks in the background, watching your mailbox file, waiting for new
mail. When mail arrives, it invokes the MH scan(1) command and pops up a window with the
results. Clicking the left mouse button anywhere in this window makes it go away. The
window will also disappear if iconified or if the mailbox size drops to zero.
OPTIONS
Xlbiff accepts all of the standard X Toolkit command line options along with the
additional options listed below:
-help This option indicates that a brief summary of the allowed options should be
printed on standard output.
-bottom This option tells xlbiff to realize/unrealize() the output window instead of using
XtPopup/down(). This has the effect of causing the window manager to reposition
the window each time it pops up, and is useful for when you specify negative Y
coordinates, ie, at the bottom of the screen. Running xlbiff in this situation
without -bottom would cause new lines to run off the bottom edge of the screen.
+bottom Opposite of -bottom.
-file filename
This option specifies the name of the file which should be monitored. By default,
it watches /usr/spool/mail/username, where username is your login name.
-rows height
This option specifies the maximum height, in lines of text, of the xlbiff window.
The default is 20.
-columns width
This option specifies the maximum width, in characters, of the xlbiff window. The
default is 80.
-resetSaver
If this option is set, xlbiff will reset the screen saver when new mail comes in.
This is useful if you're doing something near your workstation but not on it.
+resetSaver
Opposite of -resetSaver.
-update seconds
This option specifies the frequency in seconds at which xlbiff should update its
display. The default is 15 seconds.
-fade seconds
Number of seconds to wait before popping window back down. This option can be
used to monitor events of non-lasting importance, such as syslog or UUCP queues.
The default value of 0 disables the fade option.
-led ledNum
This option specifies a keyboard LED to light up when there is mail waiting in the
file. The default is zero (do not light a LED).
-ledPopdown
This option indicates that the LED should be turned off when xlbiff is popped
down. Ordinarily the LED stays lit to remind one of awaiting mail. This option
has no effect if the -led option is disabled.
+ledPopdown
Opposite of -ledPopdown.
-refresh seconds
This option specifies the number of seconds to wait before re-posting the mail
window after you acknowledge it, and it still contains the same mail. The default
is 0 (no refresh). A useful value for this is 1800 (30 minutes).
-mailerCommand command
Specifies the command to invoke when the the mailer() action is activated, eg,
"xterm -e elm" or "inc". By default this is bound to the second mouse button.
Invoking this action will pop down the main window. When the command exits, it
will pop up again. Due to mailbox consistency considerations, the mailerCommand
should not exit before it is finished with the mailbox, i.e. it should not be run
in the background.
There is no default mailerCommand.
-scanCommand command
Specifies a shell command to be executed to list the contents of mailbox file.
The specified string value is used as the argument to a system(3) call and may
therefore contain i/o redirection. The command's stdout is used to generate the
window. Internally, the command is generated as
sprintf(buf, scanCommand, file, columns)
so a %s and %d respectively in scanCommand will generate the values of file and
columns. The default scanCommand is
scan -file %s -width %d
-checkCommand command
Specifies a shell command to be executed to check for new mail (or some other
condition) rather than simply examining the size of the mail file. The specified
string value is used as the argument to a popen(3) call, and the output generated
is important. Like xbiff, an exit status of 0 indicates that a change in
condition demands a new evaluation of scanCommand and subsequent popup, 1
indicates no change in status, and 2 indicates that the condition has been cleared
and the xlbiff window should pop down. By default, no shell command is provided.
This option may be useful to monitor logins (by checking update times of
/etc/utmp), when using POP or other custom maildrop mechanisms, and so forth.
Similarly to scanCommand, the checkCommand is generated internally as
sprintf(buf, checkCommand, file, previous)
previous is the numeric value output by the last time checkCommand was run, or
zero the first time. This is useful for allowing the checkCommand to maintain
state in a primitive fashion. For instance, a checkCommand such as
compare_size %s %d
would "do the right thing" if compare_size were a script such as:
#!/bin/sh
NEWSIZE=`wc -c <$1`
echo $NEWSIZE
if [ $NEWSIZE -ne $2 ]; then
if [ $NEWSIZE -eq 0 ]; then
exit 2
else
exit 0
fi
fi
exit 1
The author of xlbiff uses this facility to keep track of several maildrops with
one command. See the Bcheck and Bscan scripts, included.
-volume percentage
This option specifies how loud the bell should be rung when new mail comes in.
The following standard X Toolkit command line arguments are commonly used with xlbiff:
-display display
This option specifies the X server to contact.
-geometry +x+y
This option specifies the preferred position of the scan window.
-bg color
This option specifies the color to use for the background of the window.
-fg color
This option specifies the color to use for the foreground of the window.
-xrm resourcestring
This option specifies a resource string to be used. This is especially useful for
setting resources that do not have separate command line options.
RESOURCES
The application class name is XLbiff. It understands all of the core resource names and
classes as well as:
bottom (class Bottom)
Same as the -bottom option.
file (class File)
Same as the -file option.
mailerCommand (class MailerCommand)
Same as the -mailerCommand option.
scanCommand (class ScanCommand)
Same as the -scanCommand option.
checkCommand (class CheckCommand)
Same as the -checkCommand option.
resetSaver (class ResetSaver)
Same as the -resetSaver option.
update (class Interval)
Same as the -update option.
fade (class Fade)
Same as the -fade option.
columns (class Columns)
Same as the -columns option.
rows (class Rows)
Specifies the maximum height, in lines, of the xlbiff window. The default is 20.
led (class Led)
Same as the -led option.
ledPopdown (class LedPopdown)
Same as the -ledPopdown option.
refresh (class Refresh)
Same as the -refresh option.
sound (class Sound)
Specify a command to be run in place of a bell when new mail arrives. For
example, on a Sun Sparc you might use:
*sound: /usr/demo/SOUND/play -v %d /usr/demo/SOUND/sounds/doorbell.au
The command is generated internally with sprintf, so the characters ``%d'' will be
replaced with the numeric value of the volume resource.
volume (class Volume)
Same as the -volume option.
ACTIONS
Xlbiff provides the following actions for use in event translations:
popdown()
This action causes the window to vanish.
exit() This action causes xlbiff to exit.
The default translations are
<Button1Press>: popdown()
<Button3Press>: exit()
ENVIRONMENT
DISPLAY is used to get the default host and display number.
FILES
/usr/spool/mail/username
default mail file to check.
SEE ALSO
X(1), scan(1)
BUGS
specifying dimensions in -geometry causes badness.
The led option does not work on Suns before SunOS 4.1/X11R5.
AUTHOR
Ed Santiago, esm@pobox.com
ACKNOWLEDGEMENTS
Xlbiff took shape around the xgoodbye sample program in the O'Reilly X Toolkit Intrinsics
Programming Manual. A lot of code was stolen from xbiff, including this man page. Thanks
also to Stephen Gildea (gildea@expo.lcs.mit.edu) for the many, many contributions that
made xlbiff grow from a midnight hack to a more mature product.
2 June 1994 XLBIFF(1x)