trusty (5) mimedefang-filter.5.gz
NAME
mimedefang-filter - Configuration file for MIMEDefang mail filter.
DESCRIPTION
mimedefang-filter is a Perl fragment that controls how mimedefang.pl disposes of various parts of a MIME
message. In addition, it contains some global variable settings that affect the operation of
mimedefang.pl.
CALLING SEQUENCE
Incoming messages are scanned as follows:
1) A temporary working directory is created. It is made the current working directory and the e-mail
message is split into parts in this directory. Each part is represented internally as an instance of
MIME::Entity.
2) If the file /etc/mail/mimedefang-filter.pl defines a Perl function called filter_begin, it is called
with a single argument consisting of a MIME::Entity representing the parsed e-mail message. Any return
value is ignored.
3) For each leaf part of the mail message, filter is called with four arguments: entity, a MIME::Entity
object; fname, the suggested filename taken from the MIME Content-Disposition header; ext, the file
extension, and type, the MIME Content-Type value. For each non-leaf part of the mail message,
filter_multipart is called with the same four arguments as filter. A non-leaf part of a message is a
part that contains nested parts. Such a part has no useful body, but you should still perform filename
checks to check for viruses that use malformed MIME to masquerade as non-leaf parts (like
message/rfc822). In general, any action you perform in filter_multipart applies to the part itself and
any contained parts.
Note that both filter and filter_multipart are optional. If you do not define them, a default function
that simply accepts each part is used.
4) After all parts have been processed, the function filter_end is called if it has been defined. It is
passed a single argument consisting of the (possibly modified) MIME::Entity object representing the
message about to be delivered.
DISPOSITION
mimedefang.pl examines each part of the MIME message and chooses a disposition for that part. (A
disposition is selected by calling one of the following functions from filter and then immediately
returning.) Available dispositions are:
action_accept
The part is passed through unchanged. If no disposition function is returned, this is the
default.
action_accept_with_warning
The part is passed through unchanged, but a warning is added to the mail message.
action_drop
The part is deleted without any notification to the recipients.
action_drop_with_warning
The part is deleted and a warning is added to the mail message.
action_replace_with_warning
The part is deleted and instead replaced with a text message.
action_quarantine
The part is deleted and a warning is added to the mail message. In addition, a copy of the part
is saved on the mail server in the directory /var/spool/MIMEDefang and a notification is sent to
the MIMEDefang administrator.
action_bounce
The entire e-mail message is rejected and an error returned to the sender. The intended
recipients are not notified. Note that in spite of the name, MIMEDefang does not generate and e-
mail a failure notification. Rather, it causes the SMTP server to return a 5XX SMTP failure code.
action_discard
The entire e-mail message is discarded silently. Neither the sender nor the intended recipients
are notified.
CONTROLLING RELAYING
You can define a function called filter_relay in your filter. This lets you reject SMTP connection
attempts early on in the SMTP dialog, rather than waiting until the whole message has been sent. Note
that for this check to take place, you must use the -r flag with mimedefang.
filter_relay is passed five arguments: $hostip is the IP address of the relay host (for example,
"127.0.0.1"), $hostname is the host name if known (for example, "localhost.localdomain"). If the host
name could not be determined, $hostname is $hostip enclosed in square brackets. (That is, ("$hostname"
eq "[$hostip]") will be true.)
The remaining three arguments to filter_relay are $port, $myip and $myport which contain the client's TCP
port, the Sendmail daemon's listening IP address and the Sendmail daemon's listening port.
filter_relay must return a two-element list: ($code, $msg). $msg specifies the text message to use for
the SMTP reply, but because of limitations in the Milter API, this message is for documentation purposes
only---you cannot set the text of the SMTP message returned to the SMTP client from filter_relay.
$code is a literal string, and can have one of the following values:
'REJECT'
if the connection should be rejected.
'CONTINUE'
if the connection should be accepted.
'TEMPFAIL'
if a temporary failure code should be returned.
'DISCARD'
if the message should be accepted and silently discarded.
'ACCEPT_AND_NO_MORE_FILTERING'
if the connection should be accepted and no further filtering done.
Earlier versions of MIMEDefang used -1 for TEMPFAIL, 0 for REJECT and 1 for CONTINUE. These values still
work, but are deprecated.
In the case of REJECT or TEMPFAIL, $msg specifies the text part of the SMTP reply. $msg must not contain
newlines.
For example, if you wish to reject connection attempts from any machine in the spammer.com domain, you
could use this function:
sub filter_relay {
my ($ip, $name) = @_;
if ($name =~ /spammer\.com$/) {
return ('REJECT', "Sorry; spammer.com is blacklisted");
}
return ('CONTINUE', "ok");
}
FILTERING BY HELO
You can define a function called filter_helo in your filter. This lets you reject connections after the
HELO/EHLO SMTP command. Note that for this function to be called, you must use the -H flag with
mimedefang.
filter_helo is passed six arguments: $ip and $name are the IP address and name of the sending relay, as
in filter_relay. The third argument, $helo, is the argument supplied in the HELO/EHLO command.
The remaining three arguments to filter_relay are $port, $myip and $myport which contain the client's TCP
port, the Sendmail daemon's listening IP address and the Sendmail daemon's listening port.
filter_helo must return a two-to-five element list: ($code, $msg, $smtp_code, $smtp_dsn, $delay). $code
is a return code, with the same meaning as the $code return from filter_relay. $msg specifies the text
message to use for the SMTP reply. If $smtp_code and $smtp_dsn are supplied, they become the SMTP
numerical reply code and the enhanced status delivery code (DSN code). If they are not supplied,
sensible defaults are used. $delay specifies a delay in seconds; the C milter code will sleep for $delay
seconds before returning the reply to Sendmail. $delay defaults to zero.
(Note that the delay is implemented in the Milter C code; if you specify a delay of 30 seconds, that
doesn't mean a Perl slave is tied up for the duration of the delay. The delay only costs one Milter
thread.)
FILTERING BY SENDER
You can define a function called filter_sender in your filter. This lets you reject messages from
certain senders, rather than waiting until the whole message has been sent. Note that for this check to
take place, you must use the -s flag with mimedefang.
filter_sender is passed four arguments: $sender is the envelope e-mail address of the sender (for
example, "<dfs@roaringpenguin.com>"). The address may or may not be surrounded by angle brackets. $ip
and $name are the IP address and host name of the SMTP relay. Finally, $helo is the argument to the SMTP
"HELO" command.
Inside filter_sender, you can access any ESMTP arguments (such as "SIZE=12345") in the array @ESMTPArgs.
Each ESMTP argument occupies one array element.
filter_sender must return a two-to-five element list, with the same meaning as the return value from
filter_helo.
For example, if you wish to reject messages from spammer@badguy.com, you could use this function:
sub filter_sender {
my ($sender, $ip, $hostname, $helo) = @_;
if ($sender =~ /^<?spammer\@badguy\.com>?$/i) {
return ('REJECT', 'Sorry; spammer@badguy.com is blacklisted.');
}
return ('CONTINUE', "ok");
}
As another example, some spammers identify their own machine as your machine in the SMTP "HELO" command.
This function rejects a machine claiming to be in the "roaringpenguin.com" domain unless it really is a
Roaring Penguin machine:
sub filter_sender {
my($sender, $ip, $hostname, $helo) = @_;
if ($helo =~ /roaringpenguin.com/i) {
if ($ip ne "127.0.0.1" and
$ip ne "216.191.236.23" and
$ip ne "216.191.236.30") {
return('REJECT', "Go away... $ip is not in roaringpenguin.com");
}
}
return ('CONTINUE', "ok");
}
As a third example, you may wish to prevent spoofs by requiring SMTP authentication when email is sent
from some email addresses. This function rejects mail from "king@example.com", unless the connecting user
properly authenticated as "elvisp". Note that this needs access to the %SendmailMacros global, that is
not available in filter_sender until after a call to read_commands_file.
sub filter_sender {
my($sender, $ip, $hostname, $helo) = @_;
read_commands_file();
### notice: This assumes The King uses authentication without realm!
if ($sender =~ /^<?king\@example\.com>?$/i and
$SendmailMacros{auth_authen} ne "elvisp") {
return('REJECT', "Faking mail from the king is not allowed.");
}
return ('CONTINUE', "ok");
}
FILTERING BY RECIPIENT
You can define a function called filter_recipient in your filter. This lets you reject messages to
certain recipients, rather than waiting until the whole message has been sent. Note that for this check
to take place, you must use the -t flag with mimedefang.
filter_recipient is passed nine arguments: $recipient is the envelope address of the recipient and
$sender is the envelope e-mail address of the sender (for example, "<dfs@roaringpenguin.com>"). The
addresses may or may not be surrounded by angle brackets. $ip and $name are the IP address and host name
of the SMTP relay. $first is the envelope address of the first recipient for this message, and $helo is
the argument to the SMTP "HELO" command. The last three arguments, $rcpt_mailer, $rcpt_host and
$rcpt_addr are the Sendmail mailer, host and address triple for the recipient address. For example, for
local recipients, $rcpt_mailer is likely to be "local", while for remote recipients, it is likely to be
"esmtp".
Inside filter_recipient, you can access any ESMTP arguments (such as "NOTIFY=never") in the array
@ESMTPArgs. Each ESMTP argument occupies one array element.
filter_recipient must return a two-to-five element list whose interpretation is the same as for
filter_sender. Note, however, that if filter_recipient returns 'DISCARD', then the entire message for
all recipients is discarded. (It doesn't really make sense, but that's how Milter works.)
For example, if you wish to reject messages from spammer@badguy.com, unless they are to
postmaster@mydomain.com, you could use this function:
sub filter_recipient {
my ($recipient, $sender, $ip, $hostname, $first, $helo,
$rcpt_mailer, $rcpt_host, $rcpt_addr) = @_;
if ($sender =~ /^<?spammer\@badguy\.com>?$/i) {
if ($recipient =~ /^<?postmaster\@mydomain\.com>?$/i) {
return ('CONTINUE', "ok");
}
return ('REJECT', 'Sorry; spammer@badguy.com is blacklisted.');
}
return ('CONTINUE', "ok");
}
INITIALIZATION AND CLEANUP
Just before a slave begins processing messages, mimedefang.pl calls the functions filter_initialize (if
it is defined) with no arguments. By the time filter_initialize is called, all the other initialization
(such as setting up syslog facility and priority) has been done.
If you are not using an embedded Perl interpreter, then performing an action inside filter_initialize is
practically the same as performing it directly in the filter file, outside any function definition.
However, if you are using an embedded Perl interpreter, then anything you call directly from outside a
function definition is executed once only in the parent process. Anything in filter_initialize is
executed once per slave. If you use any code that opens a descriptor (for example, a connection to a
database server), you must run that code inside filter_initialize and not directly from the filter,
because the multiplexor closes all open descriptors when it activates a new slave.
When a slave is about to exit, mimedefang.pl calls the function filter_cleanup (if it is defined) with no
arguments. This function can do whatever cleanup you like, such as closing file descriptors and cleaning
up long-lived slave resources. The return value from filter_cleanup becomes the slave's exit status.
If filter_cleanup takes longer than 10 seconds to run, the slave is sent a SIGTERM signal. If that
doesn't kill it (because you're catching signals, perhaps), then a further 10 seconds later, the slave is
sent a SIGKILL signal.
CONTROLLING PARSING
If you define a function called filter_create_parser taking no arguments, then mimedefang.pl will call it
to create a MIME::Parser object for parsing mail messages.
Filter_create_parser is expected to return a MIME::Parser object (or an instance of a class derived from
MIME::Parser).
You can use filter_create_parser to change the behavior of the MIME::Parser used by mimedefang.pl.
If you do not define a filter_create_parser function, then a built-in version equivalent to this is used:
sub filter_create_parser () {
my $parser = MIME::Parser->new();
$parser->extract_nested_messages(1);
$parser->extract_uuencode(1);
$parser->output_to_core(0);
$parser->tmp_to_core(0);
return $parser;
}
EXTENDING MIMEDEFANG
The man page for mimedefang-protocol(7) lists commands that are passed to slaves in server mode (see "SERVER COMMANDS".) You can define a function called filter_unknown_cmd to extend the set of commands your filter can handle. If you define filter_unknown_cmd, it is passed the unknown command as a single argument. It should return a list of values as follows: The first element of the list must be either "ok" or "error:" (with the colon.) The remaining arguments are percent-encoded. All the resulting pieces are joined together with a single space between them, and the resulting string passed back as the reply to the multiplexor. For example, the following function will make your filter reply to a "PING" command with "PONG": sub filter_unknown_cmd ($) { my($cmd) = @_; if ($cmd eq "PING") { return("ok", "PONG"); } return("error:", "Unknown command"); } You can test this filter by typing the following as root: md-mx-ctrl PING The response should be: ok PONG If you extend the set of commands using filter_unknown_cmd, you should make all your commands start with an upper-case letter to avoid clashes with future built-in commands.
REJECTING UNKNOWN USERS EARLY
A very common mail setup is to have a MIMEDefang machine act as an SMTP proxy, accepting and scanning
mail and then relaying it to the real mail server. Unfortunately, this means that the MIMEDefang machine
cannot know if a local address is valid or not, and will forward all mail for the appropriate domains.
If a mail comes in for an unknown user, the MIMEDefang machine will be forced to generate a bounce
message when it tries to relay the mail.
It's often desirable to have the MIMEDefang host reply with a "User unknown" SMTP response directly.
While this can be done by copying the list of local users to the MIMEDefang machine, MIMEDefang has a
built-in function called md_check_against_smtp_server for querying another relay host:
md_check_against_smtp_server($sender, $recip, $helo, $server, $port) This
function connects to the SMTP server $server and pretends to send mail from $sender to $recip.
The return value is always a two-element array. If the RCPT TO: command succeeds, the return
value is ("CONTINUE", "OK"). If the RCPT fails with a permanent failure, the return value is
("REJECT", $msg), where $msg is the message from the SMTP server. Any temporary failures,
connection errors, etc. result in a return value of ("TEMPFAIL", $msg).
The optional argument $port specifies the TCP port to connect to. If it is not supplied, then the
default SMTP port of 25 is used.
Suppose the machine filter.domain.tld is filtering mail destined for the real mail server
mail.domain.tld. You could have a filter_recipient function like this:
sub filter_recipient
{
my($recip, $sender, $ip, $host, $first, $helo,
$rcpt_mailer, $rcpt_host, $rcpt_addr) = @_;
return md_check_against_smtp_server($sender, $recip,
"filter.domain.tld",
"mail.domain.tld");
}
For each RCPT TO: command, MIMEDefang opens an SMTP connection to mail.domain.tld and checks if the
command would succeed.
Please note that you should only use md_check_against_smtp_server if your mail server responds with a
failure code for nonexistent users at the RCPT TO: level. Also, this function may impose too much
overhead if you receive a lot of e-mail, and it will generate lots of useless log entries on the real
mail server (because of all the RCPT TO: probes.) It may also significantly increase the load on the
real mail server.
GLOBAL VARIABLES YOU CAN SET
The following Perl global variables should be set in mimedefang-filter:
$AdminAddress
The e-mail address of the MIMEDefang administrator.
$DaemonAddress
The e-mail address from which MIMEDefang-originated notifications come.
$AddWarningsInline
If this variable is set to 0, then all MIMEDefang warnings (such as created by action_quarantine
or action_drop_with_warning) are collected together and added in a separate MIME part called
WARNING.TXT. If the variable is set to 1, then the warnings are added directly in the first
text/plain and text/html parts of the message. If the message does not contain any text/plain or
text/html parts, then a WARNING.TXT MIME part is added as before.
$MaxMIMEParts
A message containing many MIME parts can cause MIME::Tools to consume large amounts of memory and
bring your system to its knees. If you set $MaxMIMEParts to a positive number, then MIME parsing
is terminated for messages with more than that many parts, and the message is bounced. In this
case, none of your filter functions is called.
By default, $MaxMIMEParts is set to -1, meaning there is no limit on the number of parts in a
message. Note that in order to use this variable, you must install the Roaring Penguin patched
version of MIME::Tools, version 5.411a-RP-Patched-02 or newer.
$Stupidity{"NoMultipleInlines"}
Set this to 1 if your e-mail is too stupid to display multiple MIME parts in-line. In this case,
a nasty hack causes the first part of the original message to appear as an attachment if warning
are issued. Mail clients that are not this stupid are Netscape Communicator and Pine. On the
other hand, Microsoft Exchange and Microsoft Outlook are indeed this stupid. Perhaps users of
those clients should switch.
The following global variables may optionally be set. If they are not set, sensible defaults are
used:
$AddApparentlyToForSpamAssassin
By default, MIMEDefang tries to pass SpamAssassin a message that looks exactly like one it would
receive via procmail. This means adding a Received: header, adding a Message-ID header if
necessary, and adding a Return-Path: header. If you set $AddApparentlyToForSpamAssassin to 1,
then MIMEDefang also adds an Apparently-To: header with all the envelope recipients before passing
the message to SpamAssassin. This lets SpamAssassin detect possibly whitelisted recipient
addresses.
The default value for $AddApparentlyToForSpamAssassin is 0.
$SyslogFacility
This specifies the logging facility used by mimedefang.pl. By default, it is set to "mail", but
you can set it to other possibilites. See the openlog(3) man page for details. You should name
facilities as all-lowercase without the leading "LOG_". That is, use "local3", not "LOG_LOCAL3".
$WarningLocation (default 0)
If set to 0 (the default), non-inline warnings are placed first. If you want the warning at the
end of the e-mail, set $WarningLocation to -1.
$DaemonName (default "MIMEDefang")
The full name used when MIMEDefang sends out notifications.
$AdminName (default "MIMEDefang Administrator")
The full name of the MIMEDefang administrator.
$SALocalTestsOnly (default 1)
If set to 1, SpamAssassin calls will use only local tests. This is the default and recommended
setting. This disables Received, RBL and Razor tests in an all or nothing fashion. To use Razor
this MUST be set to 0. You can add 'skip_rbl_checks 1' to your SpamAssassin config file if you
need to.
$NotifySenderSubject (default "MIMEDefang Notification")
The subject used when e-mail is sent out by action_notify_sender(). If you set this, you should
set it each time you call action_notify_sender() to ensure consistency.
$NotifyAdministratorSubject (default "MIMEDefang Notification")
The subject used when e-mail is sent out by action_notify_administrator(). If you set this, you
should set it each time you call action_notify_administrator() to ensure consistency.
$QuarantineSubject (default "MIMEDefang Quarantine Report")
The subject used when a quarantine notice is sent to the administrator. If you set this, you
should set it each time you call action_quarantine() or action_quarantine_entire_message().
$NotifyNoPreamble (default 0)
Normally, notifications sent by action_notify_sender() have a preamble warning about message
modifications. If you do not want this, set $NotifyNoPreamble to 1.
$CSSHost (default 127.0.0.1:7777:local)
Host and port for the Symantec CarrierScan Server virus scanner. This takes the form
ip_addr:port:local_or_nonlocal. The ip_addr and port are the host and port on which CarrierScan
Server is listening. If you want to scan local files, append :local to force the use of the
AVSCANLOCAL command. If the CarrierScan Server is on another host, append :nonlocal to force the
file contents to be sent to the scanner over the socket.
$SophieSock (default /var/spool/MIMEDefang/sophie)
Socket used for Sophie daemon calls within message_contains_virus_sophie and
entity_contains_virus_sophie unless a socket is provided by the calling routine.
$ClamdSock (default /var/spool/MIMEDefang/clamd.sock)
Socket used for clamd daemon calls within message_contains_virus_clamd and
entity_contains_virus_clamd unless a socket is provided by the calling routine.
$TrophieSock (default /var/spool/MIMEDefang/trophie)
Socket used for Trophie daemon calls within message_contains_virus_trophie and
entity_contains_virus_trophie unless a socket is provided by the calling routine.
FILTER
The heart of mimedefang-filter is the filter procedure. See the examples that came with MIMEDefang to
learn to write a filter. The filter is called with the following arguments:
$entity
The MIME::Entity object. (See the MIME::tools Perl module documentation.)
$fname The suggested attachment filename, or "" if none was supplied.
$ext The file extension (all characters from the rightmost period to the end of the filename.)
$type The MIME type (for example, "text/plain".)
The filename is derived as follows:
o First, if the Content-Disposition header has a "filename" field, it is used.
o Otherwise, if the Content-Type header has a "name" field, it is used.
o Otherwise, the Content-Description header value is used.
Note that the truly paranoid will check all three fields for matches. The functions re_match and
re_match_ext perform regular expression matches on all three of the fields named above, and return 1 if
any field matches. See the sample filters for details. The calling sequence is:
re_match($entity, "regexp")
re_match_ext($entity, "regexp")
re_match returns true if any of the fields matches the regexp without regard to case. re_match_ext
returns true if the extension in any field matches. An extension is defined as the last dot in a name
and all remaining characters.
A third function called re_match_in_zip_directory will look inside zip files and return true if any of
the file names inside the zip archive match the regular expression. Call it like this:
my $bh = $entity->bodyhandle();
my $path = (defined($bh)) ? $bh->path() : undef;
if (defined($path) and re_match_in_zip_directory($path, "regexp")) {
# Take action...
}
You should not call re_match_in_zip_directory unless you know that the entity is a zip file attachment.
GLOBAL VARIABLES SET BY MIMEDEFANG.PL
The following global variables are set by mimedefang.pl and are available for use in your filter. All of
these variables are always available to filter_begin, filter, filter_multipart and filter_end. In
addition, some of them are available in filter_relay, filter_sender or filter_recipient. If this is the
case, it will be noted below.
%Features
This hash lets you determine at run-time whether certain functionality is available. This hash is
available at all times assuming the detect_and_load_perl_modules() function has been called. The
defined features are:
$Features{"SpamAssassin"} is 1 if SpamAssassin 1.6 or better is installed; 0 otherwise.
$Features{"HTML::Parser"} is 1 if HTML::Parser is installed; 0 otherwise.
$Features{"Virus:FPROTD"} is currently always 0. Set it to 1 in your filter file if you have F-
Risk's FPROTD scanner earlier than version 6.
$Features{"Virus:FPROTD6"} is currently always 0. Set it to 1 in your filter file if you have
version 6 of F-Risk's FPROTD scanner.
$Features{"Virus:SymantecCSS"} is currently always 0. Set it to 1 in your filter file if you have
the Symantec CarrierScan Server virus scanner.
$Features{"Virus:NAI"} is the full path to NAI uvscan if it is installed; 0 if it is not.
$Features{"Virus:BDC"} is the full path to Bitdefender bdc if it is installed; 0 if it is not.
$Features{"Virus:NVCC"} is the full path to Norman Virus Control nvcc if it is installed; 0 if it
is not.
$Features{"Virus:HBEDV"} is the full path to H+BEDV AntiVir if it is installed; 0 if it is not.
$Features{"Virus:VEXIRA"} is the full path to Central Command Vexira if it is installed; 0 if it
is not.
$Features{"Virus:SOPHOS"} is the full path to Sophos sweep if it is installed; 0 if it is not.
$Features{"Virus:SAVSCAN"} is the full path to Sophos savscan if it is installed; 0 if it is not.
$Features{"Virus:CLAMAV"} is the full path to Clam AV clamscan if it is installed; 0 if it is not.
$Features{"Virus:AVP"} is the full path to AVP AvpLinux if it is installed; 0 if it is not.
$Features{"Virus:AVP5"} is the full path to Kaspersky "aveclient" if it is installed; 0 if it is
not.
$Features{"Virus:CSAV"} is the full path to Command csav if it is installed; 0 if it is not.
$Features{"Virus:FSAV"} is the full path to F-Secure fsav if it is installed; 0 if it is not.
$Features{"Virus:FPROT"} is the full path to F-Risk f-prot if it is installed; 0 if it is not.
$Features{"Virus:FPSCAN"} is the full path to F-Risk fpscan if it is installed; 0 if it is not.
$Features{"Virus:SOPHIE"} is the full path to Sophie if it is installed; 0 if it is not.
$Features{"Virus:CLAMD"} is the full path to clamd if it is installed; 0 if it is not.
$Features{"Virus:TROPHIE"} is the full path to Trophie if it is installed; 0 if it is not.
$Features{"Virus:NOD32"} is the full path to ESET NOD32 nod32cli if it is installed; 0 if it is
not.
NOTE: Perl-module based features such as SpamAssassin are determined at runtime and may change as
these are added and removed. Most Virus features are predetermined at the time of configuration
and do not adapt to runtime availability unless changed by the filter rules.
$CWD This variable holds the working directory for the current message. During filter processing,
mimedefang.pl chdir's into this directory before calling any of the filter_ functions. Note that
this variable is set correctly in filter_sender and filter_recipient, but not in filter_relay.
$SuspiciousCharsInHeaders
If this variable is true, then mimedefang has discovered suspicious characters in message headers.
This might be an exploit for bugs in MIME-parsing routines in some badly-written mail user agents
(e.g. Microsoft Outlook.) You should always drop such messages.
$SuspiciousCharsInBody
If this variable is true, then mimedefang has discovered suspicious characters in the message
body. This might be an exploit for bugs in MIME-parsing routines in some badly-written mail user
agents (e.g. Microsoft Outlook.) You should always drop such messages.
$RelayHostname
The host name of the relay. This is the name of the host that is attempting to send e-mail to
your host. May be "undef" if the host name could not be determined. This variable is available
in filter_relay, filter_sender and filter_recipient in addition to the body filtering functions.
$RelayAddr
The IP address of the sending relay (as a string consisting of four dot-separated decimal
numbers.) One potential use of $RelayAddr is to limit mailing to certain lists to people within
your organization. This variable is available in filter_relay, filter_sender and filter_recipient
in addition to the body filtering functions.
$Helo The argument given to the SMTP "HELO" command. This variable is available in filter_sender
and filter_recipient, but not in filter_relay.
$Subject
The contents of the "Subject:" header.
$Sender
The sender of the e-mail. This variable is set in filter_sender and filter_recipient in addition
to the body filtering functions.
@Recipients
A list of the recipients. In filter_recipient, it is set to the single recipient currently under
consideration. Or, after calling read_commands_file within filter_recipient, the current recipient
under consideration is in the final position of the array, at $Recipients[-1], while any previous
(and accepted) recipients are at the beginning of the array, that is, in @Recipients[0 ..
$#Recipients-1].
$MessageID
The contents of the "Message-ID:" header if one is present. Otherwise, contains the string
"NOQUEUE".
$QueueID
The Sendmail queue identifier if it could be determined. Otherwise, contains the string
"NOQUEUE". This variable is set correctly in filter_sender and filter_recipient, but it is not
available in filter_relay.
$MsgID Set to $QueueID if the queue ID could be determined; otherwise, set to $MessageID. This
identifier should be used in logging, because it matches the identifier used by Sendmail to log
messages. Note that this variable is set correctly in filter_sender and filter_recipient, but it
is not available in filter_relay.
$VirusScannerMessages
Each time a virus-scanning function is called, messages (if any) from the virus scanner are
accumulated in this variable. You can use it in filter_end to formulate a notification (if you
wish.)
$VirusName
If a virus-scanning function found a virus, this variable will hold the virus name (if it could be
determined.)
$SASpamTester
If defined, this is the configured Mail::SpamAssassin object used for mail tests. It may be
initialized with a call to spam_assassin_init which also returns it.
%SendmailMacros
This hash contains the values of some Sendmail macros. The hash elements exist only for macros
defined by Sendmail. See the Sendmail documentation for the meanings of the macros.
By default, mimedefang passes the values of the following macros: ${daemon_name}, ${daemon_port},
${if_name}, ${if_addr}, $j, $_, $i, ${tls_version}, ${cipher}, ${cipher_bits}, ${cert_subject},
${cert_issuer}, ${auth_type}, ${auth_authen}, ${auth_ssf}, ${auth_author}, ${mail_mailer},
${mail_host} and ${mail_addr}. In addition, ${client_port} is set to the client's TCP port.
If any macro is not set or not passed to milter, it will be unavailable. To access the value of a
macro, use:
$SendmailMacros{"macro_name"}
Do not place curly brackets around the macro name. This variable is available in filter_sender
and filter_recipient after a call to read_commands_file.
@SenderESMTPArgs
This array contains all the ESMTP arguments supplied in the MAIL FROM: command. For example:
sub print_sender_esmtp_args {
foreach (@SenderESMTPArgs) {
print STDERR "Sender ESMTP arg: $_0;
}
}
%RecipientESMTPArgs
This hash contains all the ESMTP arguments supplied in each RCPT TO: command. For example:
sub print_recip_esmtp_args {
foreach my $recip (@Recipients) {
foreach(@{$RecipientESMTPArgs{$recip}}) {
print STDERR "Recip ESMTP arg for $recip: $_0;
}
}
}
%RecipientMailers
This hash contains the Sendmail "mailer-host-address" triple for each recipient. Here's an
example of how to use it:
sub print_mailer_info {
my($recip, $mailer, $host, $addr);
foreach $recip (@Recipients) {
$mailer = ${RecipientMailers{$recip}}[0];
$host = ${RecipientMailers{$recip}}[1];
$addr = ${RecipientMailers{$recip}}[2];
print STDERR "$recip: mailer=$mailer, host=$host, addr=$addr\n";
}
}
In filter_recipient, this variable by default only contains information on the recipient currently
under investigation. Information on all recipients is available after calling read_commands_file.
ACTIONS
When the filter procedure decides how to dispose of a part, it should call one or more action_
subroutines. The action subroutines are:
action_accept()
Accept the part.
action_rebuild()
Rebuild the mail body, even if mimedefang thinks no changes were made. Normally, mimedefang does
not alter a message if no changes were made. action_rebuild may be used if you make changes to
entities directly (by manipulating the MIME::Head, for example.) Unless you call action_rebuild,
mimedefang will be unaware of the changes. Note that all the built-in action... routines that
change a message implicitly call action_rebuild.
action_add_header($hdr, $val)
Add a header to the message. This can be used in filter_begin or filter_end. The $hdr component
is the header name without the colon, and the $val is the header value. For example, to add the
header:
X-MyHeader: A nice piece of text
use:
action_add_header("X-MyHeader", "A nice piece of text");
action_change_header($hdr, $val, $index)
Changes an existing header in the message. This can be used in filter_begin or filter_end. The
$hdr parameter is the header name without the colon, and $val is the header value. If the header
does not exist, then a header with the given name and value is added.
The $index parameter is optional; it defaults to 1. If you supply it, then the $index'th
occurrence of the header is changed, if there is more than one header with the same name. (This
is common with the Received: header, for example.)
action_insert_header($hdr, $val, $index)
Add a header to the message int the specified position $index. A position of 0 specifies that the
header should be prepended before existing headers. This can be used in filter_begin or
filter_end. The $hdr component is the header name without the colon, and the $val is the header
value.
action_delete_header($hdr, $index)
Deletes an existing header in the message. This can be used in filter_begin or filter_end. The
$hdr parameter is the header name without the colon.
The $index parameter is optional; it defaults to 1. If you supply it, then the $index'th
occurrence of the header is deleted, if there is more than one header with the same name.
action_delete_all_headers($hdr)
Deletes all headers with the specified name. This can be used in filter_begin or filter_end. The
$hdr parameter is the header name without the colon.
action_drop()
Drop the part. If called from filter_multipart, drops all contained parts also.
action_drop_with_warning($msg)
Drop the part, but add the warning $msg to the e-mail message. If called from filter_multipart,
drops all contained parts also.
action_accept_with_warning($msg)
Accept the part, but add the warning $msg to the e-mail message.
action_replace_with_warning($msg)
Drop the part and replace it with a text part $msg. If called from filter_multipart, drops all
contained parts also.
action_replace_with_url($entity, $doc_root, $base_url, $msg, [$cd_data, $salt])
Drop the part, but save it in a unique location under $doc_root. The part is replaced with the
text message $msg. The string "_URL_" in $msg is replaced with $base_url/something, that can be
used to retrieve the message.
You should not use this function in filter_multipart.
This action is intended for stripping large parts out of the message and replacing them to a link
on a Web server. Here's how you would use it in filter():
$size = (stat($entity->bodyhandle->path))[7];
if ($size > 1000000) {
return action_replace_with_url($entity,
"/home/httpd/html/mail_parts",
"http://mailserver.company.com/mail_parts",
"The attachment was larger than 1,000,000 bytes.\n" .
"It was removed, but may be accessed at this URL:\n\n" .
"\t_URL_\n");
}
This example moves attachments greater than 1,000,000 bytes into /home/httpd/html/mail_parts and
replaces them with a link. The directory should be accessible via a Web server at
http://mailserver.company.com/mail_parts.
The generated name is created by performing a SHA1 hash of the part and adding the extension to
the ASCII-HEX representation of the hash. If many different e-mails are sent containing an
identical large part, only one copy of the part is stored, regardless of the number of senders or
recipients.
For privacy reasons, you must turn off Web server indexing in the directory in which you place
mail parts, or anyone will be able to read them. If indexing is disabled, an attacker would have
to guess the SHA1 hash of a part in order to read it.
Optionally, a fifth argument can supply data to be saved into a hidden dot filename based on the
generated name. This data can then be read in on the fly by a CGI script or mod_perl module
before serving the file to a web client, and used to add information to the response, such as
Content-Disposition data.
A sixth optional argument, $salt, is mixed in to the SHA1 hash. This salt can be any string and
should be kept confidential. The salt is designed to prevent people from guessing whether or not
a particular attachment has been received on your server by altering the SHA1 hash calculation.
action_defang($entity, $name, $fname, $type)
Accept the part, but change its name to $name, its suggested filename to $fname and its MIME type
to $type. If $name or $fname are "", then mimedefang.pl generates generic names. Do not use this
action in filter_multipart.
If you use action_defang, you must define a subroutine called defang_warning in your filter. This
routine takes two arguments: $oldfname (the original name of an attachment) and $fname (the
defanged version.) It should return a message telling the user what happened. For example:
sub defang_warning {
my($oldfname, $fname) = @_;
return "The attachment '$oldfname' was renamed to '$fname'\n";
}
action_external_filter($entity, $cmd)
Run an external UNIX command $cmd. This command must read the part from the file ./FILTERINPUT
and leave the result in ./FILTEROUTPUT. If the command executes successfully, returns 1,
otherwise 0. You can test the return value and call another action_ if the filter failed. Do not
use this action in filter_multipart.
action_quarantine($entity, $msg)
Drop and quarantine the part, but add the warning $msg to the e-mail message.
action_quarantine_entire_message($msg)
Quarantines the entire message in a quarantine directory on the mail server, but does not
otherwise affect disposition of the message. If "$msg" is non-empty, it is included in any
administrator notification.
action_sm_quarantine($reason)
Quarantines a message in the Sendmail mail queue using the new QUARANTINE facility of Sendmail
8.13. Consult the Sendmail documentation for details about this facility. If you use
action_sm_quarantine with a version of Sendmail that lacks the QUARANTINE facility, mimedefang
will log an error message and not quarantine the message.
action_bounce($reply, $code, $dsn)
Reject the entire e-mail message with an SMTP failure code, and the one-line error message $reply.
If the optional $code and $dsn arguments are supplied, they specify the numerical SMTP reply code
and the extended status code (DSN code). If the codes you supply do not make sense for a bounce,
they are replaced with "554" and "5.7.1" respectively.
action_bounce merely makes a note that the message is to be bounced; remaining parts are still
processed. If action_bounce is called for more than one part, the mail is bounced with the
message in the final call to action_bounce. You can profitably call action_quarantine followed by
action_bounce if you want to keep a copy of the offending part. Note that the message is not
bounced immediately; rather, remaining parts are processed and the message is bounced after all
parts have been processed.
Note that despite its name, action_bounce does not generate a "bounce message". It merely rejects
the message with an SMTP failure code.
WARNING: action_bounce() may cause the sending relay to generate spurious bounce messages if the
sender address is faked. This is a particular problem with viruses. However, we believe that on
balance, it's better to bounce a virus than to silently discard it. It's almost never a good idea
to hide a problem.
action_tempfail($msg, $code, $dsn)
Cause an SMTP "temporary failure" code to be returned, so the sending mail relay requeues the
message and tries again later. The message $msg is included with the temporary failure code. If
the optional $code and $dsn arguments are supplied, they specify the numerical SMTP reply code and
the extended status code (DSN code). If the codes you supply do not make sense for a temporary
failure, they are replaced with "450" and "4.7.1" respectively.
action_discard()
Silently discard the message, notifying nobody. You can profitably call action_quarantine
followed by action_discard if you want to keep a copy of the offending part. Note that the
message is not discarded immediately; rather, remaining parts are processed and the message is
discarded after all parts have been processed.
action_notify_sender($message)
This action sends an e-mail back to the original sender with the indicated message. You may call
another action after this one. If action_notify_sender is called more than once, the messages are
accumulated into a single e-mail message -- at most one notification message is sent per incoming
message. The message should be terminated with a newline.
The notification is delivered in deferred mode; you should run a client-queue runner if you are
using Sendmail 8.12.
NOTE: Viruses often fake the sender address. For that reason, if a virus-scanner has detected a
virus, action_notify_sender is disabled and will simply log an error message if you try to use it.
action_notify_administrator($message)
This action e-mails the MIMEDefang administrator the supplied message. You may call another
action after this one; action_notify_administrator does not affect mail processing. If
action_notify_administrator is called more than once, the messages are accumulated into a single
e-mail message -- at most one notification message is sent per incoming message. The message
should be terminated with a newline.
The notification is delivered in deferred mode; you should run a client-queue runner if you are
using Sendmail 8.12.
append_text_boilerplate($entity, $boilerplate, $all)
This action should only be called from filter_end. It appends the text "\n$boilerplate\n" to the
first text/plain part (if $all is 0) or to all text/plain parts (if $all is 1).
append_html_boilerplate($entity, $boilerplate, $all)
This action should only be called from filter_end. It adds the text "\n$boilerplate\n" to the
first text/html part (if $all is 0) or to all text/html parts (if $all is 1). This function tries
to be smart about inserting the boilerplate; it uses HTML::Parser to detect closing tags and
inserts the boilerplate before the </body> tag if there is one, or before the </html> tag if there
is no </body>. If there is no </body> or </html> tag, it appends the boilerplate to the end of
the part.
Do not use append_html_boilerplate unless you have installed the HTML::Parser Perl module.
Here is an example illustrating how to use the boilerplate functions:
sub filter_end {
my($entity) = @_;
append_text_boilerplate($entity,
"Lame text disclaimer", 0);
append_html_boilerplate($entity,
"<em>Lame</em> HTML disclaimer", 0);
}
action_add_part($entity, $type, $encoding, $data, $fname, $disposition [, $offset])
This action should only be called from the filter_end routine. It adds a new part to the message,
converting the original message to mutipart if necessary. The function returns the part so that
additional mime attributes may be set on it. Here's an example:
sub filter_end {
my($entity) = @_;
action_add_part($entity, "text/plain", "-suggest",
"This e-mail does not represent" .
"the official policy of FuBar, Inc.\n",
"disclaimer.txt", "inline");
}
The $entity parameter must be the argument passed in to filter_end. The $offset parameter is
optional; if omitted, it defaults to -1, which adds the new part at the end. See the MIME::Entity
man page and the add_part member function for the meaning of $offset.
Note that action_add_part tries to be more intelligent than simply calling $entity->add_part. The
decision process is as follows:
o If the top-level entity is multipart/mixed, then the part is simply added.
o Otherwise, a new top-level multipart/mixed container is generated, and the original top-level
entity is made the first part of the multipart/mixed container. The new part is then added to the
multipart/mixed container.
USEFUL ROUTINES
mimedefang.pl includes some useful functions you can call from your filter:
detect_and_load_perl_modules()
Unless you really know what you're doing, this function must be called first thing in your filter
file. It causes mimedefang.pl to detect and load Perl modules such as Mail::SpamAssassin,
Net::DNS, etc., and to populate the %Features hash.
send_quarantine_notifications()
This function should be called from filter_end. If any parts were quarantined, a quarantine
notification is sent to the MIMEDefang administrator. Please note that if you do not call
send_quarantine_notifications, then no quarantine notifications are sent.
get_quarantine_dir()
This function returns the full path name of the quarantine directory. If you have not yet
quarantined any parts of the message, a quarantine directory is created and its pathname returned.
change_sender($sender)
This function changes the envelope sender to $sender. It can only be called from filter_begin or
any later function. Please note that this function is only supported with Sendmail/Milter 8.14.0
or newer. It has no effect if you're running older versions.
add_recipient($recip)
This function adds $recip to the list of envelope recipients. A copy of the message (after any
modifications by MIMEDefang) will be sent to $recip in addition to the original recipients. Note
that add_recipient does not modify the @Recipients array; it just makes a note to Sendmail to add
the recipient.
delete_recipient($recip)
This function deletes $recip from the list of recipients. That person will not receive a copy of
the mail. $recip should exactly match an entry in the @Recipients array for delete_recipient() to
work. Note that delete_recipient does not modify the @Recipients array; it just makes a note to
Sendmail to delete the recipient.
resend_message($recip1, $recip2, ...)
or
resend_message(@recips)
This function immediately resends the original, unmodified mail message to each of the named
recipients. The sender's address is preserved. Be very careful when using this function, because
it resends the original message, which may contain undesired attachments. Also, you should not
call this function from filter(), because it resends the message each time it is called. This may
result in multiple copies being sent if you are not careful. Call from filter_begin() or
filter_end() to be safe.
The function returns true on success, or false if it fails.
Note that the resend_message function delivers the mail in deferred mode (using Sendmail's "-odd"
flag.) You must run a client-submission queue processor if you use Sendmail 8.12. We recommend
executing this command as part of the Sendmail startup sequence:
sendmail -Ac -q5m
remove_redundant_html_parts($entity)
This function should only be called from filter_end. It removes redundant HTML parts from the
message. It works by deleting any part of type text/html from the message if (1) it is a sub-part
of a multipart/alternative part, and (2) there is another part of type text/plain under the
multipart/alternative part.
replace_entire_message($entity)
This function can only be called from filter_end. It replaces the entire message with $entity, a
MIME::Entity object that you have constructed. You can use any of the MIME::Tools functions to
construct the entity.
read_commands_file()
This function should only be called from filter_sender and filter_recipient. This will read the
COMMANDS file (as described in mimedefang-protocol(7)), and will fill or update the following
global variables: $Sender, @Recipients, %RecipientMailers, $RelayAddr, $RealRelayAddr,
$RelayHostname, $RealRelayHostname, $QueueID, $Helo, %SendmailMacros.
If you do not call read_commands_file, then the only information available in filter_sender and
filter_recipient is that which is passed as an argument to the function.
stream_by_domain()
Do not use this function unless you have Sendmail 8.12 and locally- submitted e-mail is submitted
using SMTP.
This function should only be called at the very beginning of filter_begin(), like this:
sub filter_begin {
if (stream_by_domain()) {
return;
}
# Rest of filter_begin
}
stream_by_domain() looks at all the recipients of the message, and if they belong to the same
domain (e.g., joe@domain.com, jane@domain.com and sue@domain.com), it returns 0 and sets the
global variable $Domain to the domain (domain.com in this example.)
If users are in different domains, stream_by_domain() resends the message (once to each domain)
and returns 1 For example, if the original recipients are joe@abc.net, jane@xyz.net and
sue@abc.net, the original message is resent twice: One copy to joe@abc.net and sue@abc.net, and
another copy to jane@xyz.net. Also, any subsequent scanning is canceled (filter() and
filter_end() will not be called for the original message) and the message is silently discarded.
If you have Sendmail 8.12, then locally-submitted messages are sent via SMTP, and MIMEDefang will
be called for each resent message. It is possible to set up Sendmail 8.12 so locally-submitted
messages are delivered directly; in this case, stream_by_domain will not work.
Using stream_by_domain allows you to customize your filter rules for each domain. If you use the
function as described above, you can do this in your filter routine:
sub filter {
my($entity, $fname, $ext, $type) = @_;
if ($Domain eq "abc.com") {
# Filter actions for abc.com
} elsif ($Domain eq "xyz.com") {
# Filter actions for xyz.com
} else {
# Default filter actions
}
}
You cannot rely on $Domain being set unless you have called stream_by_domain().
stream_by_recipient()
Do not use this function unless you have Sendmail 8.12 and locally- submitted e-mail is submitted
using SMTP.
This function should only be called at the very beginning of filter_begin(), like this:
sub filter_begin {
if (stream_by_recipient()) {
return;
}
# Rest of filter_begin
}
If there is more than one recipient, stream_by_recipient() resends the message once to each
recipient. That way, you can customize your filter rules on a per-recipient basis. This may
increase the load on your mail server considerably.
Also, a "recipient" is determined before alias expansion. So "all@mydomain.com" is considered a
single recipient, even if Sendmail delivers to a list.
If you have Sendmail 8.12, then locally-submitted messages are sent via SMTP, and MIMEDefang will
be called for each resent message. It is possible to set up Sendmail 8.12 so locally-submitted
messages are delivered directly; in this case, stream_by_recipient() will not work.
stream_by_recipient() allows you to customize your filter rules for each recipient in a manner
similar to stream_by_domain().
LOGGING
md_graphdefang_log_enable($facility, $enum_recips)
Enables the md_graphdefang_log function (described next). The function logs to syslog using the
specified facility. If you omit $facility, it defaults to 'mail'. If you do not call
md_graphdefang_log_enable in your filter, then any calls to md_graphdefang_log simply do nothing.
If you supply $enum_recips as 1, then a line of logging is output for each recipient of a mail
message. If it is zero, then only a single line is output for each message. If you omit
$enum_recips, it defaults to 1.
md_graphdefang_log($event, $v1, $v2)
Logs an event with up to two optional additional parameters. The log message has a specific
format useful for graphing tools; the message looks like this:
MDLOG,msgid,event,v1,v2,sender,recipient,subj
"MDLOG" is literal text. "msgid" is the Sendmail queue identifier. "event" is the event name,
and "v1" and "v2" are the additional parameters. "sender" is the sender's e-mail address.
"recipient" is the recipient's e-mail address, and "subj" is the message subject. If a message
has more than one recipient, md_graphdefang_log may log an event message for each recipient,
depending on how you called md_graphdefang_log_enable.
Note that md_graphdefang_log should not be used in filter_relay, filter_sender or
filter_recipient. The global variables it relies on are not valid in that context.
If you want to log general text strings, do not use md_graphdefang_log. Instead, use md_syslog
(described next).
md_syslog($level, $msg)
Logs the message $msg to syslog, using level $level. The level is a literal string, and should be
one of 'err', 'debug', 'warning', ´emerg', 'crit', 'notice' or 'info'. (See syslog(3) for
details.)
Note that md_syslog does not perform %-subsitutions like syslog(3) does. Depending on your Perl
installation, md_syslog boils down to a call to Unix::Syslog::syslog or Sys::Syslog::syslog. See
the Unix::Syslog or Sys::Syslog man pages for more details.
md_openlog($tag, $facility)
Sets the tag used in syslog messages to $tag, and sends the logs to the $facility facility. If
you do not call md_openlog before you call md_syslog, then it is called implicitly with $tag set
to mimedefang.pl and $facility set to mail.
RBL LOOKUP FUNCTIONS
mimedefang.pl includes the following functions for looking up IP addresses in DNS-based real-time
blacklists. Note that the "relay_is_blacklisted" functions are deprecated and may be removed in a future
release. Instead, you should use the module Net::DNSBL::Client from CPAN.
relay_is_blacklisted($relay, $domain)
This checks a DNS-based real-time spam blacklist, and returns true if the relay host is
blacklisted, or false otherwise. (In fact, the return value is whatever the blacklist returns as
a resolved hostname, such as "127.0.0.4")
Note that relay_is_blacklisted uses the built-in gethostbyname function; this is usually quite
inefficient and does not permit you to set a timeout on the lookup. Instead, we recommend using
one of the other DNS lookup function described in this section. (Note, though, that the other
functions require the Perl Net::DNS module, whereas relay_is_blacklisted does not.)
Here's an example of how to use relay_is_blacklisted:
if (relay_is_blacklisted($RelayAddr, "rbl.spamhaus.org")) {
action_add_header("X-Blacklist-Warning",
"Relay $RelayAddr is blacklisted by Spamhaus");
}
relay_is_blacklisted_multi($relay, $timeout, $answers_wanted, [$domain1, $domain2, ...], $res)
This function is similar to relay_is_blacklisted, except that it takes a timeout argument
(specified in seconds) and an array of domains to check. The function checks all domains in
parallel, and is guaranteed to return in $timeout seconds. (Actually, it may take up to one
second longer.)
The parameters are:
$relay -- the IP address you want to look up
$timeout -- a timeout in seconds after which the function should return
$answers_wanted -- the maximum number of positive answers you care about. For example, if you're
looking up an address in 10 different RBLs, but are going to bounce it if it is on four or more,
you can set $answers_wanted to 4, and the function returns as soon as four "hits" are discovered.
If you set $answers_wanted to zero, then the function does not return early.
[$domain1, $domain2, ...] -- a reference to an array of strings, where each string is an RBL
domain.
$res -- a Net::DNS::Resolver object. This argument is optional; if you do not supply it, then
relay_is_blacklisted_multi constructs its own resolver.
The return value is a reference to a hash; the keys of the hash are the original domains, and the
corresponding values are either SERVFAIL, NXDOMAIN, or a list of IP addresses in dotted-quad
notation.
Here's an example:
$ans = relay_is_blacklisted_multi($RelayAddr, 8, 0,
["sbl.spamhaus.org", "relays.ordb.org"]);
foreach $domain (keys(%$ans)) {
$r = $ans->{$domain};
if (ref($r) eq "ARRAY") {
# It's an array -- it IS listed in RBL
print STDERR "Lookup in $domain yields [ ";
foreach $addr (@$r) {
print STDERR $addr . " ";
}
print STDERR "]\n";
} else {
# It is NOT listed in RBL
print STDERR "Lookup in $domain yields "
. $ans->{$domain} . "\n";
}
}
You should compare each of $ans->{$domain} to "SERVFAIL" and "NXDOMAIN" to see if the relay is not
listed. Any other return value will be an array of IP addresses indicating that the relay is
listed.
Any lookup that does not succeed within $timeout seconds has the corresponding return value set to
SERVFAIL.
relay_is_blacklisted_multi_list($relay, $timeout, $answers_wanted, [$domain1, $domain2, ...], $res)
This function is similar to relay_is_blacklisted_multi except that the return value is simply an
array of RBL domains in which the relay was listed.
relay_is_blacklisted_multi_count($relay, $timeout, $answers_wanted, [$domain1, $domain2, ...], $res)
This function is similar to relay_is_blacklisted_multi except that the return value is an integer
specifying the number of domains on which the relay was blacklisted.
md_get_bogus_mx_hosts($domain)
This function is not really an RBL lookup. What it does is look up all the MX records for the
specified domain, and return a list of "bogus" IP addresses found amongst the MX records. A
"bogus" IP address is an IP address in a private network (10.0.0.0/8, 172.16.0.0/12,
192.168.0.0/16), the loopback network (127.0.0.0/8), local-link for auto-DHCP (169.254.0.0/16),
IPv4 multicast (224.0.0.0/4) or reserved (240.0.0.0/4).
Here's how you might use the function in filter_sender:
sub filter_sender {
my ($sender, $ip, $hostname, $helo) = @_;
if ($sender =~ /@([^>]+)/) {
my $domain = $1;
my @bogushosts = md_get_bogus_mx_hosts($domain);
if (scalar(@bogushosts)) {
return('REJECT', "Domain $domain contains bogus MX record(s) " .
join(', ', @bogushosts));
}
}
return ('CONTINUE', 'ok');
}
TEST FUNCTIONS
mimedefang.pl includes some "test" functions:
md_version()
returns the version of MIMEDefang as a string (for example, "2.73").
message_rejected()
Returns true if any of action_tempfail, action_bounce or action_discard have been called for this
message; returns false otherwise.
If you have the Mail::SpamAssassin Perl module installed (see http://www.spamassassin.org) you may call
any of the spam_assassin_* functions. They should only be called from filter_begin or filter_end because
they operate on the entire message at once. Most functions use an optionally provided config file. If
no config file is provided, mimedefang.pl will look for one of four default SpamAssassin preference
files. The first of the following found will be used:
o /etc/sa-mimedefang.cf
o /etc/mail/sa-mimedefang.cf
o /etc/spamassassin/local.cf
o /etc/spamassassin.cf
Important Note: MIMEDefang does not permit SpamAssassin to modify messages. If you want to tag spam
messages with special headers or alter the subject line, you must use MIMEDefang functions to do it.
Setting SpamAssassin configuration options to alter messages will not work.
spam_assassin_is_spam([ $config_file ])
Determine if the current message is SPAM/UCE as determined by SpamAssassin. Compares the score of
the message against the threshold score (see below) and returns true if it is. Uses
spam_assassin_check below.
spam_assassin_check([ $config_file ])
This function returns a four-element list of the form ($hits, $required, $tests, $report). $hits
is the "score" given to the message by SpamAssassin (higher score means more likely SPAM).
$required is the number of hits required before SpamAssassin concludes that the message is SPAM.
$tests is a comma-separated list of SpamAssassin test names, and $report is text detailing which
tests triggered and their point score. This gives you insight into why SpamAssassin concluded
that the message is SPAM. Uses spam_assassin_status below.
spam_assassin_status([ $config_file ])
This function returns a Mail::SpamAssasin::PerMsgStatus object. Read the SpamAssassin
documentation for details about this object. You are responsible for calling the finish method
when you are done with it. Uses spam_assassin_init and spam_assassin_mail below.
spam_assassin_init([ $config_file ])
This function returns the new global Mail::SpamAssassin object with the specified or default
config (outlined above). If the global object is already defined, returns it -- does not change
config files! The object can be used to perform other SpamAssassin related functions.
spam_assassin_mail()
This function returns a Mail::SpamAssassin::NoMailAudit object with the current email message
contained in it. It may be used to perform other SpamAssassin related functions.
md_copy_orig_msg_to_work_dir()
Normally, virus-scanners are passed only the unpacked, decoded parts of a MIME message. If you
want to pass the original, undecoded message in as well, call md_copy_orig_msg_to_work_dir prior
to calling message_contains_virus.
md_copy_orig_msg_to_work_dir_as_mbox_file()
Normally, virus-scanners are passed only the unpacked, decoded parts of a MIME message. If you
want to pass the original, undecoded message in as a UNIX-style "mbox" file, call
md_copy_orig_msg_to_work_dir_as_mbox_file prior to calling message_contains_virus. The only
difference between this function and md_copy_orig_msg_to_work_dir is that this function prepends a
"From_" line to make the message look like a UNIX-style mbox file. This is required for some
virus scanners (such as Clam AntiVirus) to recognize the file as an e-mail message.
message_contains_virus()
This function runs every installed virus-scanner and returns the scanner results. The function
should be called in list context; the return value is a three-element list ($code, $category,
$action).
$code is the actual return code from the virus scanner.
$category is a string categorizing the return code:
"ok" - no viruses detected.
"not-installed" - indicated virus scanner is not installed.
"cannot-execute" - for some reason, the scanner could not be executed.
"virus" - a virus was found.
"suspicious" - a "suspicious" file was found.
"interrupted" - scanning was interrupted.
"swerr" - an internal scanner software error occurred.
$action is a string containing the recommended action:
"ok" - allow the message through unmolested.
"quarantine" - a virus was detected; quarantine it.
"tempfail" - something went wrong; tempfail the message.
message_contains_virus_trend()
message_contains_virus_nai()
message_contains_virus_bdc()
message_contains_virus_nvcc()
message_contains_virus_csav()
message_contains_virus_fsav()
message_contains_virus_hbedv()
message_contains_virus_vexira()
message_contains_virus_sophos()
message_contains_virus_clamav()
message_contains_virus_avp()
message_contains_virus_avp5()
message_contains_virus_fprot()
message_contains_virus_fpscan()
message_contains_virus_fprotd()
message_contains_virus_fprotd_v6()
message_contains_virus_nod32()
These functions should be called in list context. They use the indicated anti-virus software to
scan the message for viruses. These functions are intended for use in filter_begin() to make an
initial scan of the e-mail message.
The supported virus scanners are:
nai NAI "uvscan" - http://www.nai.com/
Bitdefender "bdc" - http://www.bitdefender.com/
csav Command Anti-Virus - http://www.commandsoftware.com/
fsav F-Secure Anti-Virus - http://www.f-secure.com/
hbedv H+BEDV "AntiVir" - http://www.hbedv.com/
vexira Vexira "Vexira" - http://www.centralcommand.com/
sophos Sophos AntiVirus - http://www.sophos.com/
avp Kaspersky AVP and aveclient (AVP5) - http://www.avp.ru/
clamav Clam AntiVirus - http://www.clamav.net/
f-prot F-RISK F-PROT - http://www.f-prot.com/
nod32cli
ESET NOD32 - http://www.eset.com/
message_contains_virus_carrier_scan([$host])
Connects to the specified host:port:local_or_nonlocal (default $CSSHost), where the Symantec
CarrierScan Server daemon is expected to be listening. Return values are the same as the other
message_contains_virus functions.
message_contains_virus_sophie([$sophie_sock])
Connects to the specified socket (default $SophieSock), where the Sophie daemon is expected to be
listening. Return values are the same as the other message_contains_virus functions.
message_contains_virus_clamd([$clamd_sock])
Connects to the specified socket (default $ClamdSock), where the clamd daemon is expected to be
listening. Return values are the same as the other message_contains_virus functions.
message_contains_virus_trophie([$trophie_sock])
Connects to the specified socket (default $TrophieSock), where the Trophie daemon is expected to
be listening. Return values are the same as the other message_contains_virus functions.
entity_contains_virus($entity)
This function runs the specified MIME::Entity through every installed virus-scanner and returns
the scanner results. The return values are the same as for message_contains_virus().
entity_contains_virus_trend($entity)
entity_contains_virus_nai($entity)
entity_contains_virus_bdc($entity)
entity_contains_virus_nvcc($entity)
entity_contains_virus_csav($entity)
entity_contains_virus_fsav($entity)
entity_contains_virus_hbedv($entity)
entity_contains_virus_sophos($entity)
entity_contains_virus_clamav($entity)
entity_contains_virus_avp($entity)
entity_contains_virus_avp5($entity)
entity_contains_virus_fprot($entity)
entity_contains_virus_fpscan($entity)
entity_contains_virus_fprotd($entity)
entity_contains_virus_fprotd_v6($entity)
entity_contains_virus_nod32($entity)
These functions, meant to be called from filter(), are similar to the message_contains_virus
functions except they scan only the current part. They should be called from list context, and
their return values are as described for the message_contains_virus functions.
entity_contains_virus_carrier_scan($entity[, $host])
Connects to the specified host:port:local_or_nonlocal (default $CSSHost), where the Symantec
CarrierScan Server daemon is expected to be listening. Return values are the same as the other
entity_contains_virus functions.
entity_contains_virus_sophie($entity[, $sophie_sock])
Connects to the specified socket (default $SophieSock), where the Sophie daemon is expected to be
listening. Return values are the same as the other entity_contains_virus functions.
entity_contains_virus_trophie($entity[, $trophie_sock])
Connects to the specified socket (default $TrophieSock), where the Trophie daemon is expected to
be listening. Return values are the same as the other entity_contains_virus functions.
entity_contains_virus_clamd($entity[, $clamd_sock])
Connects to the specified socket (default $ClamdSock), where the clamd daemon is expected to be
listening. Return values are the same as the other entity_contains_virus functions.
SMTP FLOW
This section illustrates the flow of messages through MIMEDefang.
1. INITIAL CONNECTION
If you invoked mimedefang with the -r option and have defined a filter_relay routine, it is
called.
2. SMTP HELO COMMAND
The HELO string is stored internally, but no filter functions are called.
3. SMTP MAIL FROM: COMMAND
If you invoked mimedefang with the -s option and have defined a filter_sender routine, it is
called.
4. SMTP RCPT TO: COMMAND
If you invoked mimedefang with the -t option and have defined a filter_recipient routine, it is
called.
5. END OF SMTP DATA
filter_begin is called. For each MIME part, filter is called. Then filter_end is called.
PRESERVING RELAY INFORMATION
Most organizations have more than one machine handling internet e-mail. If the primary machine is down,
mail is routed to a secondary (or tertiary, etc.) MX server, which stores the mail until the primary MX
host comes back up. Mail is then relayed to the primary MX host.
Relaying from a secondary to a primary MX host has the unfortunate side effect of losing the original
relay's IP address information. MIMEDefang allows you to preserve this information. One way around the
problem is to run MIMEDefang on all the secondary MX hosts and use the same filter. However, you may not
have control over the secondary MX hosts. If you can persuade the owners of the secondary MX hosts to
run MIMEDefang with a simple filter that only preserves relay information and does no other scanning,
your primary MX host can obtain relay information and make decisions using $RelayAddr and $RelayHostname.
When you configure MIMEDefang, supply the "--with-ipheader" argument to the ./configure script. When you
install MIMEDefang, a file called /etc/mimedefang-ip-key will be created which contains a randomly-
generated header name. Copy this file to all of your mail relays. It is important that all of your MX
hosts have the same key. The key should be kept confidential, but it's not disastrous if it leaks out.
On your secondary MX hosts, add this line to filter_end:
add_ip_validation_header();
Note: You should only add the validation header to mail destined for one of your other MX hosts!
Otherwise, the validation header will leak out.
When the secondary MX hosts relay to the primary MX host, $RelayAddr and $RelayHostname will be set based
on the IP validation header. If MIMEDefang notices this header, it sets the global variable $WasResent
to 1. Since you don't want to trust the header unless it was set by one of your secondary MX hosts, you
should put this code in filter_begin:
if ($WasResent) {
if ($RealRelayAddr ne "ip.of.secondary.mx" and
$RealRelayAddr ne "ip.of.tertiary.mx") {
$RelayAddr = $RealRelayAddr;
$RelayHostname = $RealRelayHostname;
}
}
This resets the relay address and hostname to the actual relay address and hostname, unless the message
is coming from one of your other MX hosts.
On the primary MX host, you should add this in filter_begin:
delete_ip_validation_header();
This prevents the validation header from leaking out to recipients.
Note: The IP validation header works only in message-oriented functions. It (obviously) has no effect on
filter_relay, filter_sender and filter_recipient, because no header information is available yet. You
must take this into account when writing your filter; you must defer relay-based decisions to the message
filter for mail arriving from your other MX hosts.
GLOBAL VARIABLE LIFETIME
The following list describes the lifetime of global variables (thanks to Tony Nugent for providing this
documentation.)
If you set a global variable:
Outside a subroutine in your filter file
It is available to all functions, all the time.
In filter_relay, filter_sender or filter_recipient
Not guaranteed to be available to any other function, not even from one filter_recipient call to
the next, when receiving a multi-recipient email message.
In filter_begin
Available to filter_begin, filter and filter_end
In filter
Available to filter and filter_end
In filter_end
Available within filter_end
The "built-in" globals like $Subject, $Sender, etc. are always available to filter_begin, filter and
filter_end. Some are available to filter_relay, filter_sender or filter_recipient, but you should check
the documentation of the variable above for details.
MAINTAINING STATE
There are four basic groups of filtering functions:
1 filter_relay
2 filter_sender
3 filter_recipient
4 filter_begin, filter, filter_multipart, filter_end
In general, for a given mail message, these groups of functions may be called in completely different
Perl processes. Thus, there is no way to maintain state inside Perl between groups of functions. That
is, you cannot set a variable in filter_relay and expect it to be available in filter_sender, because the
filter_sender invocation might take place in a completely different process.
However, for a given mail message, the $CWD global variable holds the message spool directory, and the
current working directory is set to $CWD. Therefore, you can store state in files inside $CWD. If
filter_sender stores data in a file inside $CWD, then filter_recipient can retrieve that data.
Since filter_relay is called directly after a mail connection is established, there is no message context
yet, no per-message mimedefang spool directory, and the $CWD global is not set. Therefore, it is not
possible to share information from filter_relay to one of the other filter functions. The only thing that
filter_relay has in common with the other functions are the values in the globals $RelayAddr, and
$RelayHostname. These could be used to access per-remote-host information in some database.
Inside $CWD, we reserve filenames beginning with upper-case letters for internal MIMEDefang use. If you
want to create files to store state, name them beginning with a lower-case letter to avoid clashes with
future releases of MIMEDefang.
SOCKET MAPS
If you have Sendmail 8.13 or later, and have compiled it with the SOCKETMAP option, then you can use a
special map type that communicates over a socket with another program (rather than looking up a key in a
Berkeley database, for example.)
mimedefang-multiplexor implements the Sendmail SOCKETMAP protocol if you supply the -N option. In that
case, you can define a function called filter_map to implement map lookups. filter_map takes two
arguments: $mapname is the name of the Sendmail map (as given in the K sendmail configuration
directive), and $key is the key to be looked up.
filter_map must return a two-element list: ($code, $val) $code can be one of:
OK The lookup was successful. In this case, $val must be the result of the lookup
NOTFOUND
The lookup was unsuccessful -- the key was not found. In this case, $val should be the empty
string.
TEMP There was a temporary failure of some kind. $val can be an explanatory error message.
TIMEOUT
There was a timeout of some kind. $val can be an explanatory error message.
PERM There was a permanent failure. This is not the same as an unsuccessful lookup; it should be used
only to indicate a serious misconfiguration. As before, $val can be an explanatory error message.
Consider this small example. Here is a minimal Sendmail configuration file:
V10/Berkeley
Kmysock socket unix:/var/spool/MIMEDefang/map.sock
kothersock socket unix:/var/spool/MIMEDefang/map.sock
If mimedefang-multiplexor is invoked with the arguments -N unix:/var/spool/MIMEDefang/map.sock, and the
filter defines filter_map as follows:
sub filter_map ($$) {
my($mapname, $key) = @_;
my $ans;
if($mapname ne "mysock") {
return("PERM", "Unknown map $mapname");
}
$ans = reverse($key);
return ("OK", $ans);
}
Then in Sendmail's testing mode, we see the following:
> /map mysock testing123
map_lookup: mysock (testing123) returns 321gnitset (0)
> /map othersock foo
map_lookup: othersock (foo) no match (69)
(The return code of 69 means EX_UNAVAILABLE or Service Unavailable)
A real-world example could do map lookups in an LDAP directory or SQL database, or perform other kinds of
processing. You can even implement standard Sendmail maps like virtusertable, mailertable, access_db,
etc. using SOCKETMAP.
TICK REQUESTS
If you supply the -X option to mimedefang-multiplexor, then every so often, a "tick" request is sent to a
free slave. If your filter defines a function called filter_tick, then this function is called with a
single argument: the tick type. If you run multiple parallel ticks, then each tick has a type ranging
from 0 to n-1, where n is the number of parallel ticks. If you're only running one tick request, then
the argument to filter_tick is always 0.
You can use this facility to run periodic tasks from within MIMEDefang. Note, however, that you have no
control over which slave is picked to run filter_tick. Also, at most one filter_tick call with a
particular "type" argument will be active at any time, and if there are no free slaves when a tick would
occur, the tick is skipped.
SUPPORTED VIRUS SCANNERS
The following virus scanners are supported by MIMEDefang:
o Symantec CarrierScan Server (http://www.symantec.com/region/can/eng/product/scs/)
o Trend Micro vscan (http://www.antivirus.com/)
o Sophos Sweep (http://www.sophos.com/products/antivirus/savunix.html)
o H+BEDV AntiVir (http://www.hbedv.com/)
o Central Command Vexira (http://www.centralcommand.com/)
o NAI uvscan (http://www.nai.com)
o Bitdefender bdc (http://www.bitdefender.com)
o Norman Virus Control (NVCC) (http://www.norman.no/)
o Command csav (http://www.commandsoftware.com)
o F-Secure fsav (http://www.f-secure.com)
o The clamscan command-line scanner and the clamd daemon from Clam AntiVirus
(http://www.clamav.net/)
o Kaspersky Anti-Virus (AVP) (http://www.kaspersky.com/)
o F-Risk F-Prot (http://www.f-prot.com/)
o F-Risk F-Prot v6 (http://www.f-prot.com/)
o F-Risk FPROTD (daemonized version of F-Prot)
o Symantec CarrierScan Server (http://www.symantec.ca/region/can/eng/product/scs/buymenu.html)
o Sophie (http://www.vanja.com/tools/sophie/), which uses the libsavi library from Sophos, is
supported in daemon-scanning mode.
o Trophie (http://www.vanja.com/tools/trophie/), which uses the libvsapi library from Trend Micro,
is supported in daemon-scanning mode.
o ESET NOD32 (http://www.eset.com/)
AUTHORS
mimedefang was written by David F. Skoll <dfs@roaringpenguin.com>. The mimedefang home page is http://www.mimedefang.org/.
SEE ALSO
mimedefang(8), mimedefang.pl(8)