NAME

       fence_brocade - I/O Fencing agent for Brocade FC switches

SYNOPSIS

       fence_brocade [OPTION]...

DESCRIPTION

       fence_brocade is an I/O Fencing agent which can be used with Brocade FC switches.  It logs
       into a Brocade switch via telnet and disables a specified port.  Disabling the port  which
       a  machine is connected to effectively fences that machine.  Lengthy telnet connections to
       the switch should be avoided while a GFS cluster is running because  the  connection  will
       block any necessary fencing actions.

       fence_brocade  accepts  options  on  the command line as well as from stdin.  fenced sends
       parameters through stdin when it execs the agent.  fence_brocade can be run by itself with
       command line options which is useful for testing.

       After  a  fence  operation has taken place the fenced machine can no longer connect to the
       Brocade FC switch.  When the fenced machine is ready to  be  brought  back  into  the  GFS
       cluster  (after reboot) the port on the Brocade FC switch needs to be enabled. This can be
       done by running fence_brocade and specifying the enable action.

       Vendor URL: http://www.brocade.com

OPTIONS

       -a IPaddress
              IP address of the switch.

       -h     Print out a help message describing available options, then exit.

       -l login
              Login name for the switch.

       -n port
              The port number to disable on the switch.

       -o action
              The action required.  disable (default) or enable.

       -p password
              Password for login.

       -S path
              Full path to an executable to generate the password for login.

       -q     Quiet mode: print only error messages.

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       agent = < param >
              This option is used by fence_node(8) and is ignored by fence_brocade.

       ipaddr = < hostname | ip >
              IP address or hostname of the switch.

       login = < param >
              Login name.

       option = < param >
              The action required.  disable (default) or enable.

       passwd = < param >
              Password for login.

       passwd_script = < param >
              Full path to an executable to generate the password for login.

       port = < param >
              The port number to disable on the switch.

SEE ALSO

       fence(8), fence_node(8)

                                                                                 fence_brocade(8)