Provided by: ocaml-findlib_1.5.5-2build1_amd64 
NAME
META - [File that specifies metainformation of OCaml packages]
GRAMMAR
metafile ::= entry*
entry ::= assignment | addition | subpackage
subpackage ::= "package" pkgname '(' metafile ')'
assignment ::= variable_name [ formal_predicates ] '=' value
addition ::= variable_name [ formal_predicates ] '+=' value
formal_predicates ::= '(' formal_predicate { ',' formal_predicate } ')'
variable_name ::= name
formal_predicate ::= name | '-' name
name ::= [ 'A'-'Z' 'a'-'z' '0'-'9' '_' '.' ]+
pkgname ::= '"' (character but not '.')* '"'
value ::= '"' character* '"'
DESCRIPTION
If a package directory contains a file with the fixed name "META" it is interpreted as described here.
The file is a sequence of entries following the given grammar; every entry defines a variable under a
certain condition given by the list of formal predicates, or it introduces a subpackage.
There is a list of predefined variables and a list of standard predicates. These variables define:
required packages, description, version information, directories, archive files, and linker options. The
predicates denote circumstances of the application of the variables: whether the bytecode or the native
compiler is used, if there is a toploop compiled in, details of multi-threading execution, details of
profiling.
DETAILS OF THE FILE FORMAT
The file consists of a sequence of entries which must be formed as the grammar prescribes. The lexical
tokens are names, values, and interpunctuation like '(', ',' and so on. Note that linefeeds do not play a
special role, i.e. an entry definition may be given in more than one line, or several definitions may
occur on a single line. There may be comments which begin with '#' and run until the end of the line.
Names are sequences of the characters A-Z, a-z, 0-9, or _. Names containing capital letters and names
beginning with digits are allowed but not recommended.
Values are enclosed between double quotes. Values may contain any character. The characters " and \ must
be preceded by backslashes.
Package names must not contain the '.' character because it is used as delimiter of compound names.
MAIN PACKAGES AND SUBPACKAGES
The outermost variable assignments and additions belong to the main package. The name of the main package
is not defined within META; it is either the name of the directory containing META or the suffix of the
META file (if the name of the META file is formed like META.name).
The keyword package starts the definition of a subpackage. There must not be two such definitions with
the same name. Within the parantheses, the variable assignments and additions refer to the subpackage. It
is allowed that a subpackage contains further subpackages.
The package name following package is the local name relative to the main package, i.e. the name of the
main package is not mentioned. At all other places, however, the subpackage must be prefixed by the name
of the containing package, separated by a '.'.
Subpackages are independent of the containing package, except that the subpackage points to the same
installation directory as the containing package (i.e. the location of the installation directory is
inherited from the containing package).
SEMANTICS OF VARIABLE DEFINITIONS
In order to determine the value of a variable, first all assignments are inspected, and the most specific
assignment is taken (if there is none, the empty string will be taken as value). In a second step, all
additions are gone through one after the other in the order they occur in the file, and the values of all
matching additions are appended to the current value. In the following, it is further clarified which
assignment is the most specific, which additions actually match, and how the details of the value
addition look like.
The most specific assignment is selected upon a set of actual predicates, i.e. the set of predicates that
are assumed to be true. The predicates occuring in the definitions of assignments and additions are
called formal predicates. They may be positive or negative; the latter are prepended by a '-' sign. In
order to determine the value after the evaluation of the assignments, the following rules apply:
• An assignment can only be used if all positive formal predicates are included in the set of actual
predicates, and if all negative formal predicates are not included in the set of actual
predicates. Such an assignment is called applicable. If there is no such assignment, the variable
will have no value.
• If there is more than one applicable assignment, the definition with the biggest number of formal
predicates is selected.
• If there is still more than one applicable assignment, both applicable and with a maximum number
of formal predicates, the definition that is defined first is selected.
An addition is matching when all positive formal predicates are included in the set of actual predicates,
and all negative formal predicates are not included.
The value of an addition is appended to the current value with implicit white space as separator.
VARIABLES
There is a set of variables with predefined meaning:
• The variable "directory" redefines the location of the package directory. Normally, the META file
is the first file read in the package directory, and before any other file is read, the
"directory" variable is evaluated in order to see if the package directory must be changed. The
value of the "directory" variable is determined with an empty set of actual predicates. The value
must be either: an absolute path name of the alternate directory, or a path name relative to the
stdlib directory of OCaml (written "+path"), or a normal relative path name (without special
syntax). In the latter case, the interpretation depends on whether it is contained in a main or
sub package, and whether the standard repository layout or the alternate layout is in effect (see
site-lib for these terms). For a main package in standard layout the base directory is the
directory physically containing the META file, and the relative path is interpreted for this base
directory. For a main package in alternate layout the base directory is the directory physically
containing the META.pkg files. The base directory for subpackages is the package directory of the
containing package. (In the case that a subpackage definition does not have a "directory" setting,
the subpackage simply inherits the package directory of the containing package. By writing a
"directory" directive one can change this location again.)
• The variable "requires" specifies the list of required packages. The names of the packages must be
separated by white space and/or commas. The names must be fully qualified (i.e. when they refer to
a subpackage, the names of all containing packages must be prepended, separated by '.').
• The variable "description" may include a short description of the package (displayed by ocamlfind
list).
• The variable "version" specifies the version string.
• The variable "archive" specifies the list of archive files. These files should be given either as
(1) plain names without any directory information; they are only searched in the package
directory. (2) Or they have the form "+path" in which case the files are looked up relative to the
standard library. (3) Or they have the form "@name/file" in which case the files are looked up in
the package directory of another package. (4) Or they are given as absolute paths.
The names of the files must be separated by white space and/or commas. In the preprocessor stage,
the archive files are passed as extensions to the preprocessor (camlp4) call. In the linker stage
(-linkpkg), the archive files are linked. In the compiler stage, the archive files are ignored.
• The variable "linkopts" specifies additional linker options.
• The variable "error" can be used to signal error conditions. When this variable is applicable, the
ocaml compilers are stopped, and an error message is printed. The message is the value of the
variable.
• The variable "exists_if" can be used to disable subpackages. The value of "exists_if" is a file;
the subpackage is hidden if this file does not exist. You can also enumerate several files, and
the subpackage is hidden if none of the files exist.
• The variable "ppx" is a command that is added to the compiler invocation via the -ppx option
(available since OCaml-4.01). If the command is relative to the current directory (e.g. ./cmd),
the command is expected in the package directory. The special forms as defined for "archive" are
also available (e.g. @otherpkg/cmd). Additional arguments can be specified on the ocamlfind
command line with the -ppxopt option or the "ppxopt" variable.
• The variable "ppxopt" is a set of options that are added to the ppx rewriter invocation. The
contents of the variable consists of one or several whitespace-separated parts. Every part
consists of several comma-separated subparts; the first subpart indicates the package that
contains the ppx rewriter invocation, the rest contain the options to be appended. If the option
is a path relative to the current directory (e.g. ./foo.cma), the path is expanded relative to the
package directory. The special forms as defined for "archive" are also available (e.g.
@otherpkg/foo.cma).
It is possible to define additional variables but there is currently no software interpreting them.
PREDICATES
There is a list of standard predicates:
• The "byte" predicate means that the bytecode compiler is used.
• The "native" predicate means that the native compiler is used.
• The "toploop" predicate means that the toploop is available in the linked program. It is only set
when the toploop is running, not when the toploop is generated.
• The "create_toploop" predicate means that a toploop is created (using ocamlmktop).
• The "mt" predicate means that the program is multi-threaded.
• The "mt_posix" predicate means that in the case "mt" is set, too, the POSIX libraries are used to
implement threads.
• The "mt_vm" predicate means that in the case "mt" is set, too, the VM-based libraries are used to
implement threads.
• The "gprof" predicate means that in the case "native" is set, too, the program is compiled for
profiling
• The "autolink" predicate means that ocamlc can/will perform automatic linking.
• The "preprocessor" predicate means that the META variables are scanned for preprocessor options.
• The "syntax" predicate means that the -syntax option is present on the command line.
In addition to these predicates, there are package predicates for every package that is finally selected.
Of course, this kind of predicate must not be used to select "directory" and "requires" variables, but
for the other variables they are perfectly valid. The package predicates have the form "pkg_" plus the
name of the package (fully qualified).
User Manual The findlib package manager for OCaml META(5)