Ubuntu Manpage: dhcpd.leases - DHCP client lease database

Provided by: isc-dhcp-server_4.3.3-5ubuntu12.10_amd64

NAME

       dhcpd.leases - DHCP client lease database

DESCRIPTION

       The  Internet Systems Consortium DHCP Server keeps a persistent database of leases that it
       has assigned.  This database is a free-form  ASCII  file  containing  a  series  of  lease
       declarations.   Every  time  a  lease  is  acquired, renewed or released, its new value is
       recorded at the end of the lease file.  So if more than  one  declaration  appears  for  a
       given lease, the last one in the file is the current one.

       When  dhcpd is first installed, there is no lease database.   However, dhcpd requires that
       a lease database be present before it will start.  To make  the  initial  lease  database,
       just create an empty file called /var/lib/dhcp/dhcpd.leases.   You can do this with:

            touch /var/lib/dhcp/dhcpd.leases

       In  order  to prevent the lease database from growing without bound, the file is rewritten
       from time to time.   First, a temporary lease database is created and all known leases are
       dumped  to  it.    Then,  the  old  lease database is renamed /var/lib/dhcp/dhcpd.leases~.
       Finally, the newly written lease database is moved into place.

       In order to process both DHCPv4 and DHCPv6 messages you will  need  to  run  two  separate
       instances  of  the  dhcpd process.  Each of these instances will need it's own lease file.
       You can use the -lf option on the server's command line to specify a different lease  file
       name for one or both servers.

FORMAT

       Lease  descriptions  are  stored  in a format that is parsed by the same recursive descent
       parser used to read the dhcpd.conf(5) and dhclient.conf(5) files.  Lease files can contain
       lease  declarations,  and  also  group  and  subgroup  declarations, host declarations and
       failover state declarations.  Group, subgroup and host declarations  are  used  to  record
       objects created using the OMAPI protocol.

       The  lease  file is a log-structured file - whenever a lease changes, the contents of that
       lease are written to the end of the file.   This means that it is  entirely  possible  and
       quite  reasonable  for there to be two or more declarations of the same lease in the lease
       file at the same time.   In that case, the instance of that particular lease that  appears
       last in the file is the one that is in effect.

       Group,  subgroup  and  host declarations in the lease file are handled in the same manner,
       except that if any of these objects are deleted, a rubout is written to  the  lease  file.
       This  is  just  the  same  declaration, with { deleted; } in the scope of the declaration.
       When the lease file is rewritten, any such rubouts that can be eliminated are  eliminated.
       It  is  possible  to delete a declaration in the dhcpd.conf file; in this case, the rubout
       can never be eliminated from the dhcpd.leases file.

COMMON STATEMENTS FOR LEASE DECLARATIONS

While the lease file formats for DHCPv4 and DHCPv6 are different they share many common
statements and structures. This section describes the common statements while the
succeeding sections describe the protocol specific statements.

Dates

A date is specified in two ways, depending on the configuration value for the db-time-
format parameter. If it was set to default, then the date fields appear as follows:

weekday year/month/day hour:minute:second

The weekday is present to make it easy for a human to tell when a lease expires - it's
specified as a number from zero to six, with zero being Sunday. The day of week is
ignored on input. The year is specified with the century, so it should generally be four
digits except for really long leases. The month is specified as a number starting with 1
for January. The day of the month is likewise specified starting with 1. The hour is a
number between 0 and 23, the minute a number between 0 and 59, and the second also a
number between 0 and 59.

Lease times are specified in Universal Coordinated Time (UTC), not in the local time zone.
There is probably nowhere in the world where the times recorded on a lease are always the
same as wall clock times. On most unix machines, you can display the current time in UTC
by typing date -u.

If the db-time-format was configured to local, then the date fields appear as follows:

epoch <seconds-since-epoch>; # <day-name> <month-name> <day-number>
<hours>:<minutes>:<seconds> <year>

The seconds-since-epoch is as according to the system's local clock (often referred to as
"unix time"). The # symbol supplies a comment that describes what actual time this is as
according to the system's configured timezone, at the time the value was written. It is
provided only for human inspection.

If a lease will never expire, date is never instead of an actual date.

General Variables

As part of the processing of a lease information may be attached to the lease structure,
for example the DDNS information or if you specify a variable in your configuration file.
Some of these, like the DDNS information, have specific descriptions below. For others,
such as any you might define, a generic line of the following will be included.

set variable = value;

The set statement sets the value of a variable on the lease. For general information on
variables, see the dhcp-eval(5) manual page.

DDNS Variables

The ddns-text and ddns-dhcid variables

These variables are used to record the value of the client's identification
record when the server has updated DNS for a particular lease. The text
record is used with the interim DDNS update style while the dhcid record
is used for the standard DDNS update style.

The ddns-fwd-name variable

This variable records the value of the name used in
updating the client's A record if a DDNS update has been successfully
done by the server. The server may also have used this name to
update the client's PTR record.

The ddns-client-fqdn variable

If the server is configured both to use the interim or standard DDNS update
style, and to allow clients to update their own FQDNs, then if the
client did in fact update its own FQDN, the
ddns-client-fqdn variable records the name that the client has
indicated it is using. This is the name that the server will have
used to update the client's PTR record in this case.

The ddns-rev-name variable

If the server successfully updates the client's PTR record, this
variable will record the name that the DHCP server used for the PTR
record. The name to which the PTR record points will be either the
ddns-fwd-name or the ddns-client-fqdn.

Executable Statements

on events { statements... }
The on statement records a list of statements to execute if a
certain event occurs. The possible events that can occur for an
active lease are release and expiry. More than one event
can be specified - if so, the events are separated by '|' characters.

THE DHCPv4 LEASE DECLARATION

lease ip-address { statements... }

Each lease declaration includes the single IP address that has been leased to the client.
The statements within the braces define the duration of the lease and to whom it is
assigned.

starts date;
ends date;
tstp date;
tsfp date;
atsfp date;
cltt date;

The start and end time of a lease are recorded using the starts and ends statements. The
tstp statement is present if the failover protocol is being used, and indicates what time
the peer has been told the lease expires. The tsfp statement is also present if the
failover protocol is being used, and indicates the lease expiry time that the peer has
acknowledged. The atsfp statement is the actual time sent from the failover partner. The
cltt statement is the client's last transaction time.

See the description of dates in the section on common structures.

hardware hardware-type mac-address;

The hardware statement records the MAC address of the network interface on which the lease
will be used. It is specified as a series of hexadecimal octets, separated by colons.

uid client-identifier;

The uid statement records the client identifier used by the client to acquire the lease.
Clients are not required to send client identifiers, and this statement only appears if
the client did in fact send one. Client identifiers are normally an ARP type (1 for
ethernet) followed by the MAC address, just like in the hardware statement, but this is
not required.

The client identifier is recorded as a colon-separated hexadecimal list or as a quoted
string. If it is recorded as a quoted string and it contains one or more non-printable
characters, those characters are represented as octal escapes - a backslash character
followed by three octal digits.

client-hostname hostname ;

Most DHCP clients will send their hostname in the host-name option. If a client sends its
hostname in this way, the hostname is recorded on the lease with a client-hostname
statement. This is not required by the protocol, however, so many specialized DHCP
clients do not send a host-name option.

binding state state;
next binding state state;

The binding state statement declares the lease's binding state. When the DHCP server is
not configured to use the failover protocol, a lease's binding state may be active, free
or abandoned. The failover protocol adds some additional transitional states, as well as
the backup state, which indicates that the lease is available for allocation by the
failover secondary. Please see the dhcpd.conf(5) manual page for more information about
abandoned leases.

The next binding state statement indicates what state the lease will move to when the
current state expires. The time when the current state expires is specified in the ends
statement.

rewind binding state state;

This statement is part of an optimization for use with failover. This helps a server
rewind a lease to the state most recently transmitted to its peer.

option agent.circuit-id string;
option agent.remote-id string;

These statements are used to record the circuit ID and remote ID options sent by the relay
agent, if the relay agent uses the relay agent information option. This allows these
options to be used consistently in conditional evaluations even when the client is
contacting the server directly rather than through its relay agent.

The vendor-class-identifier variable

The server retains the client-supplied Vendor Class Identifier option for informational
purposes, and to render them in DHCPLEASEQUERY responses.

bootp;
reserved;

If present, they indicate that the BOOTP and RESERVED failover flags (respectively) should
be set. BOOTP and RESERVED dynamic leases are treated differently than normal dynamic
leases, as they may only be used by the client to which they are currently allocated.

Other Additional options or executable statements may be included, see the description of
them in the section on common structures.

THE DHCPv6 LEASE (IA) DECLARATION

ia_ta IAID_DUID { statements... }
ia_na IAID_DUID { statements... }
ia_pd IAID_DUID { statements... }

Each lease declaration starts with a tag indicating the type of the lease. ia_ta is for
temporary addresses, ia_na is for non-temporary addresses and ia_pd is for prefix
delegation. Following this tag is the combined IAID and DUID from the client for this
lease.

The IAID_DUID value is recorded as a colon-separated hexadecimal list or as a quoted
string. If it is recorded as a quoted string and it contains one or more non-printable
characters, those characters are represented as octal escapes - a backslash character
followed by three octal digits.

cltt date;

The cltt statement is the client's last transaction time.

See the description of dates in the section on common structures.

iaaddr ipv6-address { statements... }
iaprefix ipv6-address/prefix-length { statements... }

Within a given lease there can be multiple iaaddr and iaprefix statements.
Each will have either an IPv6 address or an IPv6 prefix (an address and
a prefix length indicating a CIDR style block of addresses). The following
statements may occur Within each iaaddr or iaprefix.

binding state state;

The binding state statement declares the lease's binding state.
In DHCPv6 you will normally see this as active or expired.

preferred-life lifetime;

The IPv6 preferred lifetime associated with this address, in seconds.

max-life lifetime;

The valid lifetime associated with this address, in seconds.

ends date;

The end time of the lease. See the description of dates in the section on
common structures.

Additional options or executable statements may be included. See the description
of them in the section on common structures.

THE FAILOVER PEER STATE DECLARATION

       The  state  of any failover peering arrangements is also recorded in the lease file, using
       the failover peer statement:

       failover peer name state {
       my state state at date;
       peer state state at date;
       }

       The states of the peer named name is being recorded.    Both  the  state  of  the  running
       server  (my  state)  and  the  other  failover  partner  (peer  state) are recorded.   The
       following  states  are  possible:  unknown-state,  partner-down,  normal,  communications-
       interrupted,  resolution-interrupted, potential-conflict, recover, recover-done, shutdown,
       paused, and startup.

FILES

       /var/lib/dhcp/dhcpd.leases /var/lib/dhcp/dhcpd.leases~

AUTHOR

       dhcpd(8) is maintained by ISC.  Information about Internet Systems Consortium can be found
       at: https://www.isc.org/

                                                                                  dhcpd.leases(5)