Provided by: cpl-plugin-kmos-doc_1.3.17+dfsg-1_all bug

NAME

       kmo_make_image - Collapse a cube to create a spatial image

SYNOPSIS

       esorex kmo_make_image [OPTIONS] FILE.sof

DESCRIPTION

       This  recipe  collapses  a  cube  along  the spectral axis using rejection. By default all
       spectral slices are averaged.

       Errors are propagated for the same spectral ranges as for the input data if a noise map is
       provided.

   BASIC PARAMETERS
       --range The spectral range can be delimited to one or several sub-ranges like "1.8,1.9" or
       "1.8,1.9; 2.0,2.11"

       --cmethod Following methods of frame combination are available:
          * ´ksigma´ (Default)
              An iterative sigma clipping. For each position all pixels in the
              spectrum are examined. If they deviate significantly, they will be
              rejected according to the conditions:
                  val > mean + stdev * cpos_rej
              and
                  val < mean - stdev * cneg_rej
              where --cpos_rej, --cneg_rej and --citer are the wished parameters
              In the first iteration median and percentile level are used.

          * ´median´
              At each pixel position the median is calculated.

          * ´average´
              At each pixel position the average is calculated.

          * ´sum´
              At each pixel position the sum is calculated.

          * ´min_max´
              The specified number of min and max pixel values will be rejected.

              --cmax and --cmin apply to this method.

   ADVANCED PARAMETERS
       --threshold Optionally an OH spectrum can be provided. In this case  a  threshold  can  be
       defined.  The  wavelengths  of  values  above  the  threshold level in the OH spectrum are
       omitted in the input frame. This parameter can be combined  with  the  --range  parameter.
       Negative threshold values are ignored.

       Own  spectra  can  be converted into the required F1S KMOS FITS format for the OH spectrum
       using kmo_fits_stack.

       --cpos_rej --cneg_rej --citer
          see --cmethod=´ksigma´ --cmax --cmin
          see --cmethod=´min_max´

         Input files:
          DO CATG           Type   Explanation                    Required #Frames
          -------           -----  -----------                    -------- -------
          <none or any>     F3I    data frame                         Y       1
          <none or any>     F1S    OH line spectrum                   N      0,1

         Output files:
          DO CATG           Type   Explanation
          -------           -----  -----------
          MAKE_IMAGE        F2I    Collapsed data cubes

OPTIONS

       --range <str>
              The spectral ranges  to  combine.  e.g."x1_start,x1_end;x2_start,x2_end"  (microns)
              (str;  default: ´´). The full name of this option for the EsoRex configuration file
              is kmos.kmo_make_image.range [default = ].

       --threshold <float>
              The OH threshold level (%) (float; default: 0.1). The full name of this option  for
              the EsoRex configuration file is kmos.kmo_make_image.threshold [default = 0.1].

       --cmethod <str>
              Apply "average", "median", "sum", "min_max." or "ksigma". (str; default: ´ksigma´).
              The  full  name  of  this   option   for   the   EsoRex   configuration   file   is
              kmos.kmo_make_image.cmethod [default = ksigma].

       --cpos_rej <float>
              The   positive  rejection  threshold  for  kappa-sigma-clipping  (sigma).   (float;
              default: 3.0). The full name of this option for the EsoRex  configuration  file  is
              kmos.kmo_make_image.cpos_rej [default = 3.0].

       --cneg_rej <float>
              The   negative  rejection  threshold  for  kappa-sigma-clipping  (sigma).   (float;
              default: 3.0). The full name of this option for the EsoRex  configuration  file  is
              kmos.kmo_make_image.cneg_rej [default = 3.0].

       --citer <long>
              The  number  of  iterations  for kappa-sigma-clipping. (long; default: 3). The full
              name of this option for the EsoRex configuration file is  kmos.kmo_make_image.citer
              [default = 3].

       --cmax <long>
              The  number of maximum pixel values to clip with min/max-clipping.  (long; default:
              1).  The  full  name  of  this  option  for  the  EsoRex  configuration   file   is
              kmos.kmo_make_image.cmax [default = 1].

       --cmin <long>
              The  number of minimum pixel values to clip with min/max-clipping.  (long; default:
              1).  The  full  name  of  this  option  for  the  EsoRex  configuration   file   is
              kmos.kmo_make_image.cmin [default = 1].

       Note  that  it  is possible to create a configuration file containing these options, along
       with suitable default values. Please refer to the details provided by the 'esorex  --help'
       command.

SEE ALSO

       The  full  documentation  for  the kmos pipeline can be downloaded as a PDF file using the
       following URL:

              ftp://ftp.eso.org/pub/dfs/pipelines/kmos/kmos-pipeline-manual-2.9.pdf

       An  overview  over  the  existing  ESO  pipelines  can  be   found   on   the   web   page
       http://www.eso.org/sci/software/pipelines/.

       Basic documentation about the EsoRex program can be found at the esorex (1) man page.

       It  is  possible  to  call  the  pipelines  from python using the python-cpl package.  See
       http://packages.python.org/python-cpl/index.html for further information.

       The  other  recipes   of   the   kmos   pipeline   are   kmo_arithmetic(7),   kmo_copy(7),
       kmo_fit_profile(7),    kmo_fits_check(7),   kmo_fits_strip(7),   kmo_illumination_flat(7),
       kmo_noise_map(7),    kmo_rotate(7),    kmo_shift(7),    kmo_sky_mask(7),     kmo_stats(7),
       kmos_combine(7),  kmos_dark(7),  kmos_extract_spec(7), kmos_flat(7), kmos_gen_reflines(7),
       kmos_illumination(7),     kmos_reconstruct(7),     kmos_sci_red(7),     kmos_sky_tweak(7),
       kmos_std_star(7), kmos_test(7), kmos_wave_cal(7)

VERSION

       kmo_make_image 1.3.17

AUTHOR

       Alex Agudo Berbel <usd-help@eso.org>

BUG REPORTS

       Please  report  any  problems to usd-help@eso.org. Alternatively, you may send a report to
       the ESO User Support Department <usd-help@eso.org>.

LICENSE

       This file is part of the CRIRES  Instrument  Pipeline  Copyright  (C)  2002,2003  European
       Southern Observatory

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as  published  by  the  Free  Software  Foundation;  either
       version 2 of the License, or (at your option) any later version.

       This  program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite  330,  Boston,
       MA  02111-1307  USA