xenial (7) oss_digi96.7.gz

Provided by: oss4-base_4.2-build2010-5ubuntu1~16.04.2_amd64 bug

NAME

       oss_digi96 - RME Digi96 professional audio driver.

DESCRIPTION

       Audio driver for the RME Digi96 family of profressional audio controllers.

       •  Only 16 and 24/32 bit audio formats are supported.

       •  All Digi96 family members support 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and 96kHz. sampling rates.

MIXER PANEL

       Note!  For  recording  you  need  to  set  digi96.sync  to  INTERNAL  and  the  values of digi96.mode and
       digi96.input to match your studio setup. Otherwise recordings will fail with I/O error.

       There are several settings that can be changed using the ossmix program shipped with OSS. Note that  some
       features  don't  work  with all Digi96 family members. For example ADAT mode is not supported by the base
       model.

       •  digi96.mode <SPDIF|AESEBU|ADAT>: This setting controls the output mode which can be S/PDIF (consumer),
          AES/EBU  (professional)  or ADAT. The input mode is detected automatically.  If ADAT input is detected
          the output mode will be switched to ADAT automatically (this doesn't work in the other direction).

       •  digi96.sync <EXTERNAL|INTERNAL>: This setting tells if the playback sampling  rate  is  based  on  the
          internal  oscillator  or  the  sample  rate detected in the input port. See also the definition of the
          digi96.worldclk setting.

       •  digi96.input <OPTICAL|COAXIAL|INTERNAL|XLR>: Selects the active input.

       •  digi96.sel <BYPASS|NORMAL>: When set to BYPASS the input signal will be routed directly to the  output
          (also sets digi96.sync automatically to EXTERNAL). In this mode audio data written to /dev/dsp will be
          muted.

       •  digi96.worldclk ON|OFF: Setting this control to ON will enable the optional worldclock  input  as  the
          sample rate source (overrides the digi96.sync setting).

       •  digi96.emph ON|OFF: Enables/disables the de-emphasis option on the analog (monitor) output connector.

       •  digi96.data  <AUDIO|AC3>:  Specifies if the output signal is audio or AC3 data (sets the non-audio bit
          in the channel status data).

OPTIONS

       None

FILES

       /etc/oss4/conf/oss_digi96.conf Device configuration file

AUTHOR

       4Front Technologies

                                                  09 July 2018                                     oss_digi96(7)