xenial (1) envy24control.1.gz

Provided by: alsa-tools-gui_1.1.0-0ubuntu1_amd64 bug

NAME

       envy24control - GUI control tool for Envy24 (ice1712) based soundcards, under ALSA.

SYNOPSIS

       envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max 8] [-p 0-8] [-s
       0-2] [-f <profiles file  name>]  [-v]  [<profile  number>|<profile  name>]  [-m  midi-channel]  [-M]  [-w
       window-width] [-t 0-9]

DESCRIPTION

       envy24control  allows  control  of the digital mixer, channel gains and other hardware settings for sound
       cards based on the ice1712 chipset (Midiman Delta series, Terratec EWS and EWX series). It also  displays
       a level meter for each input and output channel.

INVOKING

       envy24control [-c card-number] [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max 8] [-p 0-8] [-s
       0-2] [-f <profiles file  name>]  [-v]  [<profile  number>|<profile  name>]  [-m  midi-channel]  [-M]  [-w
       window-width] [-t 0-9]

       If no control-name is given, then the first sound card is used.

   Options
       -c card-number
              Use  the card specified by card-number rather than the first card.  This is equivalent with -Dhw:n
              option where n is the card number.

       -D control-name
              Use the card specified by control-name rather than the first card, normally this will  be  of  the
              form hw:n where n is the sound card number (zero-based). This is only needed if you have more than
              one Envy24-based card or if your Envy24 card is not configured as the  first  card  in  your  ALSA
              driver setup.

       -o outputs
              Limit  number  of  analog  line  outputs  to display.  Default is the number of DACs in the driver
              specification. Maximum is 8.  The number of analog output lines  can  only  be  reduced  from  the
              available number of output lines.

       -i inputs
              Limit  number  of  analog  line  inputs  to  display.  Default is the number of ADCs in the driver
              specification. Maximum is 8.  The number of analog input  lines  can  only  be  reduced  from  the
              available number of input lines.

       -p pcm outputs
              Limit number of PCM outputs to display.  Default is 8.

       -s spdif inputs/outputs
              Limit number of SPDIF inputs/outputs to display.  Default is 2.

       -f name and path of the profiles file name.
              From/to  this  file  will  envy24control  read/write  the  alsactl  settings.   If  is  not  given
              DEFAULT_PROFILERC or for restore if DEFAULT_PROFILERC doesn't exists SYS_PROFILERC will be used.

       -v view spdif playback channels in the mixer.
              It is not possible to  manage  something  (muting,  volume  levels).   It  is  only  to  view  the
              levelmeters.  Default is no view of spdif playback channels in the mixer.

       -m midi-channel
              Use MIDI controller values to control the Faders in the mixer view.  The application will react to
              controllers on channel midi-channel and send controllers on this channel when the user  moves  the
              GUI sliders.

       -M     Use an enhanced mapping from midi controller values to db sliders.

       -w window-width
              Specify  the  initial  width  of  the  envy24control window.  Using window-width in the range 0-20
              specifies approx number of mixer channels visible.  Values >20 are interpreted as screen pixels.

       -t tall-equal mixer heights
              Using -t 1 enlarges the channel mixers to the same height as the digital mixer.   With  values  >1
              the  height  of  all  mixers  is increased in stages.  -t 0 is the default, set for minimum window
              height.

SEE ALSO

        alsamixer(1), amixer(1), gamix(1)

AUTHOR

       envy24control  is   by  Jaroslav   Kysela   <perex@perex.cz>   This   document   is   by   James   Tappin
       <james@xena.uklinux.net>.   Updated  by Dirk Kalis <dirk.kalis@t-online.de>.  Options-w and -t added Alan
       Horstmann <gineera@aspect135.co.uk>

                                                  30 July 2005                                  envy24control(1)