xenial (1) hp-scan.1.gz

NAME

       hp-scan - Scan Utility

DESCRIPTION

       SANE-based scan utility for HPLIP supported all-in-one/mfp devices.

SYNOPSIS

       hp-scan [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS]

PRINTER|DEVICE-URI

       To specify a device-URI:
              -d<device-uri> or --device=<device-uri>

       To specify a CUPS printer:
              -p<printer> or --printer=<printer>

MODE

       Run in interactive mode:
              -i or --interactive

OPTIONS

       Set the logging level:
              -l<level> or --logging=<level> <level>: none, info*, error, warn, debug (*default)

       Run in debug mode:
              -g (same as option: -ldebug)

       This help information:
              -h or --help

OPTIONS (GENERAL)

       Scan destinations:
              -s<dest_list>  or --dest=<dest_list> where <dest_list> is a comma separated list containing one or
              more of: 'file'*,

       Scan mode:
              -m<mode> or --mode=<mode>. Where <mode> is 'gray'*, 'color' or 'lineart'.

       Scanning resolution:
              -r<resolution_in_dpi> or --res=<resolution_in_dpi> or --resolution=<resolution_in_dpi>  where  300
              is default.

       Image resize:
              --resize=<scale_in_%> (min=1%, max=400%, default=100%)

       Image contrast:
              -c=<contrast> or --contrast=<contrast> The contrast range varies from device to device.

       Image brightness:
              -b=<brightness> or --brightness=<brightness> The brightness range varies from device to device.

       ADF mode:
              --adf  (Note,  only  PDF  output  is  supported  when  using the ADF) --duplex or --dup for duplex
              scanning using ADF.

OPTIONS (SCAN AREA)

       Specify the units for area/box measurements:
              -t<units> or --units=<units> where <units> is 'mm'*, 'cm', 'in', 'px', or 'pt' ('mm' is default).

       Scan area:
              -a<tlx>,<tly>,<brx>,<bry> or --area=<tlx>,<tly>,<brx>,<bry> Coordinates are relative to the  upper
              left  corner  of  the  scan  area.   Units  for tlx, tly, brx, and bry are specified by -t/--units
              (default is 'mm').  Use only commas between values, no spaces.

       Scan box:
              --box=<tlx>,<tly>,<width>,<height> tlx and tly coordinates are relative to the upper  left  corner
              of  the  scan area.  Units for tlx, tly, width, and height are specified by -t/--units (default is
              'mm').  Use only commas between values, no spaces.

       Top left x of the scan area:
              --tlx=<tlx> Coordinates are relative to the upper  left  corner  of  the  scan  area.   Units  are
              specified by -t/--units (default is 'mm').

       Top left y of the scan area:
              --tly=<tly>  Coordinates  are  relative  to  the  upper  left  corner of the scan area.  Units are
              specified by -t/--units (default is 'mm').

       Bottom right x of the scan area:
              --brx=<brx> Coordinates are relative to the upper  left  corner  of  the  scan  area.   Units  are
              specified by -t/--units (default is 'mm').

       Bottom right y   of the scan area:
              --bry=<bry>  Coordinates  are  relative  to  the  upper  left  corner of the scan area.  Units are
              specified by -t/--units (default is 'mm').

       Specify the scan area based on a paper size:
              --size=<paper size name> where <paper size name> is one of: 3x5, 4x6, 5x7, a2_env, a3, a4, a5, a6,
              b4,  b5,  c6_env,  dl_env, exec, flsa, higaki, japan_env_3, japan_env_4, legal, letter, no_10_env,
              oufufu-hagaki, photo, super_b

OPTIONS ('FILE' DEST)

       Filename for 'file' destination:
              -o<file> or -f<file> or --file=<file> or --output=<file>

OPTIONS ('PDF' DEST)

       PDF viewer application:
              --pdf=<pdf_viewer>

OPTIONS ('VIEWER' DEST)

       Image viewer application:
              -v<viewer> or --viewer=<viewer>

OPTIONS ('EDITOR' DEST)

       Image editor application:
              -e<editor> or --editor=<editor>

OPTIONS ('EMAIL' DEST)

       From: address for 'email' dest:
              --email-from=<email_from_address> (required for 'email' dest.)

       To: address for 'email' dest:
              --email-to=<email__to_address> (required for 'email' dest.)

       Email subject for 'email' dest:
              --email-subject="<subject>" or --subject="<subject>" Use double quotes (") around the  subject  if
              it contains space characters.

       Note or message for the 'email' dest:
              --email-msg="<msg>"  or  --email-note="<note>" Use double quotes (") around the note/message if it
              contains space characters.

OPTIONS ('PRINTER' DEST)

       Printer queue/printer dest:
              --dp=<printer_name> or --dest-printer=<printer_name>

       Printer device-URI dest:
              --dd=<device-uri> or --dest-device=<device-uri>

OPTIONS (ADVANCED)

       Set the scanner compression mode:
              -x<mode> or --compression=<mode>, <mode>='raw', 'none' or 'jpeg' ('jpeg' is  default)  ('raw'  and
              'none' are equivalent)

SEE ALSO

AUTHOR

       HPLIP (HP Linux Imaging and Printing) is an HP developed solution for printing, scanning, and faxing with
       HP inkjet and laser based printers in Linux.

REPORTING BUGS

       The HPLIP Launchpad.net site https://launchpad.net/hplip is available to  get  help,  report  bugs,  make
       suggestions, discuss the HPLIP project or otherwise contact the HPLIP Team.

COPYRIGHT

       Copyright (c) 2001-15 HP Development Company, L.P.

       This  software  comes  with  ABSOLUTELY  NO  WARRANTY.   This  is  free  software, and you are welcome to
       distribute it under certain conditions. See COPYING file for more details.