Ubuntu Manpage: lavpipe - creates raw YUV streams from pipe list scripts

Provided by: mjpegtools_2.1.0+debian-4_amd64

NAME

       lavpipe - creates raw YUV streams from pipe list scripts

SYNOPSIS

       lavpipe [-o num] [-n num] pipe-list

DESCRIPTION

       lavpipe  reads a script file called 'pipe list' that is of a similar structure as the edit
       lists that can be fed into lav2yuv.  For info about the pipe list format see below.

       The pipe list defines several video sources and filters that are combined  by  lavpipe  to
       produce  a  single  output  YUV  stream on stdout (which for example can be compressed and
       stored to disk via mpeg2enc(1) or yuv2lav(1)).

OPTIONS

       The command line options are used to output a specific part of the resulting video stream.
       That  means  you  can  tell lavpipe how many frames to skip and how many frames to deliver
       from that point on.

       -o num This is the frame offset of the output video. The first num frames of the resulting
              video  simply  are neither calculated nor written to stdout. This value defaults to
              0.

       -n num This is the frame count. If the input files or streams defined  in  the  pipe  list
              script are long enough, the output will be of exactly num frames length. A value of
              0 means that all frames until the last one as defined in  the  pipe  list  will  be
              written out, as long as there's some input (0 is the default).

       pipe-list
              This  is  name  of the pipe list file that lavpipe will 'execute'.  For information
              about this file's format see below.

       -?     Display a synopsis of the command syntax.

EXAMPLES

       lavpipe -o 100 -n 25 film.pli
              would calculate and output to stdout frames 100 to 124 as defined in  film.pli  (in
              PAL this would be the 5th second of the film).

       lavpipe input.pli | yuv2lav -q80 output.avi
              would save the movie assembled by lavpipe as a single AVI file.

USAGE

In this section the format of lavpipe's input files the pipe list scripts is explained. If
you need some examples or a more detailed tutorial, please read the mjpegtools(1)
manpage's section about CREATING MOVIE TRANSITIONS. and the file README.lavpipe that
should be included in the distribution. Also feel free to contact us via the mailing list
(see below).

A pipe list contains of two parts: the YUV source list and after this, as many sequence
descriptions as wanted. It always begins with the following two lines:

LAV Pipe List
This is the first line in every pipe list script. It is used as a simple test if
lavpipe really was given a pipe list script and not your PhD thesis as input.

NTSC|PAL
This is the second line in every pipe list and can be either PAL or NTSC, depending
on what video standard you use. I don't remember if this is used at the moment.

Now follows the source list:

num This is the number of input commands. lavpipe will read the next num lines and
interpret them as input stream commands.

command (num times)
This is a valid command line with two variables $o and $n that will be replaced by
lavpipe with the offset and number of frames that the program has to output.
Example:
lav2yuv -o $o -f $n input.avi

Thus, an example source list could look like this:
2
lav2yuv -o $o -f $n scene1.avi
lav2yuv -o $o -f $n scene2.avi

after this you can append as many sequence descriptions as needed. Each of them is built
up as follows:

num The number of frames that this sequence will last.

num The number of inputs that will be used in this sequence. This number must of
course be less than or equal to the number of inputs that are defined above.

idx [ofs] (num times)
These are the indices to the sources that are defined at the beginning of the file
(first source is 0) with an optional frame offset (i.e. sequence starts with frame
number ofs of this input.) - this value defaults to 0. Example:
0 150

command
This is a valid command line to a YUV filter tool that reads num input streams and
writes one output stream, combining its inputs. Optionally, the filter tool can be
given the two $o and $n variables that will be replaced by lavpipe as in the source
commands (see above). For further info read README.lavpipe or the documentation for
the filter programs (if available). An example filter could look like this:
transist.flt -o 0 -O 255 -s $o -n $n -d 50
And if the sequence only has one input that simply should be copied to the output,
you can use a dash instead of a command line:
-

And here's an example for a complete pipe list that implements a transistion from
scene1.avi to scene2.avi

REMOVE THE COMMENTS AFTER The #

LAV Pipe List
PAL
2
lav2yuv -o $o -f $n scene1.avi
lav2yuv -o $o -f $n scene2.avi
50 # first sequence: 50 frames
1 # contains one input:
0 0 # scene1.avi, offset 0
- # simple output
25 # second sequence: 25 frames
2 # contains two inputs:
0 50 # scene1.avi, offset 50
1 # scene2.avi, offset 0
transist.flt -o 0 -O 255 -s $o -n $n -d 50 # transistion
50 # third sequence: 50 frames
1 # contains one input:
1 25 # scene2.avi, offset 25
- # simple output

BUGS

       I'm  sure  there  are  enough of them. lavpipe often accepts malformed pipe lists and then
       writes out a video that was all but intended - without warning.

       The mention of $n above is wrong. At one time there were two parameters but now a  program
       is  allowed  to  produce as many frames as it wants. THe author of the program hard coded,
       for reasons unknown, $n to be 0.

NOTES

       There are also some serious limitations in the system, such as frame-by-frame  processing.
       But  as the goal when writing lavpipe was the simplicity of the pipeline, other tools will
       have to be written to do more interesting tasks.
       But I want to note that it is very well possible  to  write  a  pipe  list  that  combines
       several  files,  and  then  use that pipe list as an input for another pipe list by simply
       using the lavpipe command in the source list (see above) - this can be already used to  do
       some nice things, if you have some nice filters.

       Comments  are  NOT  allowed  in  pipelist files. The comments (text after #) above are for
       illustration only.

AUTHOR

       This man page was written by Philipp Zabel.
       If you have questions, remarks, problems or you just want to contact the  developers,  the
       main mailing list for the MJPEG-tools is:
         mjpeg-users@lists.sourceforge.net

       For more info, see our website at
              http://mjpeg.sourceforge.net