Ubuntu Manpage: mini-dinstall - daemon for updating Debian packages in a repository

Provided by: mini-dinstall_0.6.30ubuntu1_all

NAME

       mini-dinstall - daemon for updating Debian packages in a repository

SYNOPSIS

       mini-dinstall [options] [directory]

DESCRIPTION

       mini-dinstall  is a tool for installing Debian packages into a personal APT repository; it
       is very similar to the dinstall tool on auric: it takes a changes  file  and  installs  it
       into the Debian archive.

       The main focus of operation is a changes file.  This file specifies a set of Debian binary
       packages, and often contains a source package too. Changes files  are  intended  to  group
       both  Debian  source  and  binary  packages  together,  so  that there is a single file to
       manipulate when uploading a package.

       mini-dinstall takes a changes file in its incoming directory (or on its  command  line  in
       batch  mode),  and installs the files it references into a directory, and sets up Packages
       and Sources files for use with APT.

RUNNING

       mini-dinstall can run in one of two modes: batch mode or daemon mode. In batch  mode,  the
       queue is process immediately, and the command exits when it is done. In daemon mode, which
       is the default, mini-dinstall runs in the background and continually checks the queue, and
       will process it whenever it has changed.

       The  optional directory argument specifies the root directory of the queue. If no argument
       is specified, the value from the configuration file is used.

       The following options can be used:

       -v, --verbose
              display extra information while running

       -q, --quiet
              display as little information as possible

       -c, --config=FILE
              use FILE as the configuration file, instead of ~/.mini-dinstall.conf

       -d, --debug
              output debugging information to the terminal and to the log

       --no-log
              don't write any information to the logs

       --no-db
              disable lookups on package database. apt-ftparchive run without --db option

       -n, --no-act
              don't perform any changes; useful in combination with the -v flag

       -b, --batch
              run in batch mode

       -r, --run
              tell the currently running daemon to process the queue immediately

       -k, --kill
              kill the currently running daemon

       --help display a short overview of available options

       --version
              display the software version

CONFIGURATION

mini-dinstall's main configuration file is ~/.mini-dinstall.conf. The file consists of a
number of different sections, each one applying to a different distribution (which
corresponds to the Distribution field in a changes file). There is also a default section
(DEFAULT), which applies to all distributions.

Each section can contain any number of

name = value

combinations, which set a configuration parameter for that distribution (or the default
one). Lists should be separated by commas, strings need only be enclosed with quotes if
they contain spaces or commas, and boolean values should be 1 for true, and 0 for false.

The configuration parameters available in the DEFAULT section are as follows:

archivedir
The root of the mini-dinstall archive. Must be set, either here or on the command
line.

extra_keyrings
Additional GnuPG keyrings to use for signature verification.

incoming_permissions
The permissions for the incoming directory. mini-dinstall will attempt to set the
directory's permissions at startup. A value of zero (´'0´' or ´'0000´') will
disable permission setting. Doing this, you MUST set permission for incoming by
hand! Defaults to 0750.

keyrings
GnuPG keyrings to use for signature verification of changes files. Setting this
parameter will modify the default list; it is generally better to modify
extra_keyrings instead. Defaults to the keyrings from the debian-keyring package.

logfile
The filename (relative to archivedir) where information will be logged. Defaults
to “mini-dinstall.log”.

mail_log_flush_count
Number of log messages after which queued messages will be sent to you. Defaults
to 10.

mail_log_flush_level
The log level upon which to immediately send all queued log messages. Valid values
are the same as for the mail_log_level option. Defaults to ERROR.

mail_log_level
The default log level which is sent to you by email. Valid values include DEBUG,
INFO, WARN, ERROR, and CRITICAL. Defaults to ERROR.

mail_to
The user to whom logs should be mailed. Defaults to the current user.

mail_subject_template
Style of the email subject. Available substitution variables are source, version,
maintainer, ... (all statements in .changes) and changes_without_dot (same as
changes, but without lines with only a dot). Default is:

mini-dinstall: Successfully installed %(source)s %(version)s to %(distribution)s

mail_body_template
Style of the email body. Valid values are the same as for the mail_subject_template
option. Default is:

Package: %(source)s
Maintainer: %(maintainer)s
Changed-By: %(changed-by)s
Changes:
%(changes_without_dot)s

tweet_server
server to push tweets. Possible values are twitter or identica

tweet_user
username to login on tweet server

tweet_password
password to login on tweet server

tweet_template
Style of the tweet body. Valid values are the same as for the mail_subject_template
option. Default is:

Installed %(source)s %(version)s to %(distribution)s

trigger_reindex
In daemon mode, whether or not to recreate the Packages and Sources files after
every upload. If you disable this, you probably want to enable dynamic_reindex. You
may want to disable this if you install a lot of packages. Defaults to enabled.

use_dnotify
If enabled, uses the dnotify(1) command to monitor directories for changes. Only
relevant if dynamic_reindex is enabled. Defaults to false.

verify_sigs
Whether or not to verify signatures on changes files. Defaults to enabled if the
debian-keyring package is installed, disabled otherwise.

The configuration parameters that can be set in the DEFAULT section and the distribution-
specific sections are:

alias A list of alternative distribution names.

architectures
A list of architectures to create subdirectories for. Defaults to “all, i386,
powerpc, sparc”.

archive_style
Either “flat” or “simple-subdir”. A flat archive style puts all of the binary
packages into one subdirectory, while the simple archive style splits up the binary
packages by architecture. Must be set.

Sources for the “flat” style should look like:

deb file:///home/walters/debian/ unstable/
deb-src file:///home/walters/debian/ unstable/
deb file:///home/walters/debian/ experimental/
deb-src file:///home/walters/debian/ experimental/

Sources for the “subdir” style should look like:

deb http://localhost/~walters/debian/ local/$(ARCH)/
deb http://localhost/~walters/debian/ local/all/
deb-src http://localhost/~walters/debian/ local/source/

chown_changes_files
Determines if the changes files should be made unreadable by others. This is
enabled by default, and is a good thing, since somebody else could unexpectedly
upload your package. Think carefully before changing this.

dynamic_reindex
If enabled, directories are watched for changes and new Packages and Sources files
are created as needed. Only used in daemon mode. Defaults to true.

generate_release
Causes a Release file to be generated (see release_* below) if enabled. Disabled
by default.

keep_old
Whether or not old packages should be kept, instead of deleting them when newer
versions of the same packages are uploaded. Defaults to false.

mail_on_success
Whether to mail on successful installation. Defaults to true.

tweet_on_success
Whether to tweet (e.g. on twitter/identi.ca) on successful installation. Defaults
to false.

max_retry_time
The maximum amount of time to wait for an incomplete upload before rejecting it.
Specified in seconds. Defaults to two days.

poll_time
How often to poll directories (in seconds) for changes if dynamic_reindex is
enabled. Defaults to 30 seconds.

post_install_script
This script is run after the changes file is installed, with the full path of the
changes file as its argument.

pre_install_script
This script is run before the changes file is installed, with the full path of the
changes file as its argument. If it exits with an error, the changes file is
skipped.

release_codename
The Codename field in the Release file. Defaults to “None”.

release_description
The Description field in the Release file. Defaults to “None”.

release_label
The Label field in the Release file. Defaults to the current user's username.

release_origin
The Origin field in the Release file. Defaults to the current user's username.

release_suite
The Suite field in the Release file. Defaults to “None”.

experimental_release
The experimental_release field mark the release as experimental. Defaults to
“None”.

release_signscript
If specified, this script will be called to sign Release files. It will be invoked
in the directory containing the Release file, and should accept the filename of the
Release file to sign as the first argument (note that it is passed a temporary
filename, not Release). It should generate a detached signature in a file named
Release.gpg.

USING DPUT

       One  convenient way to use mini-dinstall is in combination with dput's “local” method. The
       author generally tests his Debian packages by  using  dput  to  upload  them  to  a  local
       repository,  and  then  uses APT's “file” method to retrieve them locally. Here's a sample
       dput stanza:

               [local]
               fqdn = space-ghost.verbum.private
               incoming = /src/debian/mini-dinstall/incoming
               method = local
               run_dinstall = 0
               post_upload_command = mini-dinstall -r

       Obviously,  you  should  replace  the  “fqdn”  and  “incoming”  values  with  whatever  is
       appropriate  for  your  machine.  Some sample APT methods were listed in the configuration
       section.

       Now, all you have to do to test your Debian packages is:

               $ dpkg-buildpackage
               $ dput local ../program_1.2.3-1_powerpc.changes
               # wait a few seconds
               $ apt-get update
               $ apt-get install program

AUTHOR

       mini-dinstall was originally written by Colin  Walters  <walters@debian.org>  and  is  now
       maintained by Christoph Goehre <christoph.goehre@gmx.de>.