Provided by: slurm-client_15.08.7-1build1_amd64 
NAME
srun - Run parallel jobs
SYNOPSIS
srun [OPTIONS...] executable [args...]
DESCRIPTION
Run a parallel job on cluster managed by Slurm. If necessary, srun will first create a resource
allocation in which to run the parallel job.
The following document describes the the influence of various options on the allocation of cpus to jobs
and tasks.
http://slurm.schedmd.com/cpu_management.html
OPTIONS
--accel-bind=<options>
Control how tasks are bound to generic resources of type gpu, mic and nic. Multiple options may
be specified. Supported options are as include:
g Bind each task to GPUs which are closest to the allocated CPUs.
m Bind each task to MICs which are closest to the allocated CPUs.
n Bind each task to NICs which are closest to the allocated CPUs.
v Verbose mode. Log how tasks are bound to GPU and NIC devices.
-A, --account=<account>
Charge resources used by this job to specified account. The account is an arbitrary string. The
account name may be changed after job submission using the scontrol command.
--acctg-freq
Define the job accounting and profiling sampling intervals. This can be used to override the
JobAcctGatherFrequency parameter in Slurm's configuration file, slurm.conf. The supported format
is follows:
--acctg-freq=<datatype>=<interval>
where <datatype>=<interval> specifies the task sampling interval for the
jobacct_gather plugin or a sampling interval for a profiling type by the
acct_gather_profile plugin. Multiple, comma-separated <datatype>=<interval> intervals
may be specified. Supported datatypes are as follows:
task=<interval>
where <interval> is the task sampling interval in seconds for the
jobacct_gather plugins and for task profiling by the acct_gather_profile
plugin. NOTE: This frequency is used to monitor memory usage. If memory limits
are enforced the highest frequency a user can request is what is configured in
the slurm.conf file. They can not turn it off (=0) either.
energy=<interval>
where <interval> is the sampling interval in seconds for energy profiling using
the acct_gather_energy plugin
network=<interval>
where <interval> is the sampling interval in seconds for infiniband profiling
using the acct_gather_infiniband plugin.
filesystem=<interval>
where <interval> is the sampling interval in seconds for filesystem profiling
using the acct_gather_filesystem plugin.
The default value for the task sampling interval
is 30. The default value for all other intervals is 0. An interval of 0 disables sampling of the
specified type. If the task sampling interval is 0, accounting information is collected only at
job termination (reducing Slurm interference with the job).
Smaller (non-zero) values have a greater impact upon job performance, but a value of 30 seconds is
not likely to be noticeable for applications having less than 10,000 tasks.
-B --extra-node-info=<sockets[:cores[:threads]]>
Request a specific allocation of resources with details as to the number and type of computational
resources within a cluster: number of sockets (or physical processors) per node, cores per socket,
and threads per core. The total amount of resources being requested is the product of all of the
terms. Each value specified is considered a minimum. An asterisk (*) can be used as a
placeholder indicating that all available resources of that type are to be utilized. As with
nodes, the individual levels can also be specified in separate options if desired:
--sockets-per-node=<sockets>
--cores-per-socket=<cores>
--threads-per-core=<threads>
If task/affinity plugin is enabled, then specifying an allocation in this manner also sets a
default --cpu_bind option of threads if the -B option specifies a thread count, otherwise an
option of cores if a core count is specified, otherwise an option of sockets. If SelectType is
configured to select/cons_res, it must have a parameter of CR_Core, CR_Core_Memory, CR_Socket, or
CR_Socket_Memory for this option to be honored. This option is not supported on BlueGene systems
(select/bluegene plugin is configured). If not specified, the scontrol show job will display
'ReqS:C:T=*:*:*'.
--bb=<spec>
Burst buffer specification. The form of the specification is system dependent. Also see --bbf.
--bbf=<file_name>
Path of file containing burst buffer specification. The form of the specification is system
dependent. Also see --bb.
--bcast[=<dest_path>]
Copy executable file to allocated compute nodes. If a file name is specified, copy the executable
to the specified destination file path. If no path is specified, copy the file to a file named
"slurm_bcast_<job_id>.<step_id>" in the current working. For example, "srun --bcast=/tmp/mine -N3
a.out" will copy the file "a.out" from your current directory to the file "/tmp/mine" on each of
the three allocated compute nodes and execute that file.
--begin=<time>
Defer initiation of this job until the specified time. It accepts times of the form HH:MM:SS to
run a job at a specific time of day (seconds are optional). (If that time is already past, the
next day is assumed.) You may also specify midnight, noon, fika (3 PM) or teatime (4 PM) and you
can have a time-of-day suffixed with AM or PM for running in the morning or the evening. You can
also say what day the job will be run, by specifying a date of the form MMDDYY or MM/DD/YY
YYYY-MM-DD. Combine date and time using the following format YYYY-MM-DD[THH:MM[:SS]]. You can also
give times like now + count time-units, where the time-units can be seconds (default), minutes,
hours, days, or weeks and you can tell Slurm to run the job today with the keyword today and to
run the job tomorrow with the keyword tomorrow. The value may be changed after job submission
using the scontrol command. For example:
--begin=16:00
--begin=now+1hour
--begin=now+60 (seconds by default)
--begin=2010-01-20T12:34:00
Notes on date/time specifications:
- Although the 'seconds' field of the HH:MM:SS time specification is allowed by the code, note
that the poll time of the Slurm scheduler is not precise enough to guarantee dispatch of the job
on the exact second. The job will be eligible to start on the next poll following the specified
time. The exact poll interval depends on the Slurm scheduler (e.g., 60 seconds with the default
sched/builtin).
- If no time (HH:MM:SS) is specified, the default is (00:00:00).
- If a date is specified without a year (e.g., MM/DD) then the current year is assumed, unless
the combination of MM/DD and HH:MM:SS has already passed for that year, in which case the next
year is used.
--checkpoint=<time>
Specifies the interval between creating checkpoints of the job step. By default, the job step
will have no checkpoints created. Acceptable time formats include "minutes", "minutes:seconds",
"hours:minutes:seconds", "days-hours", "days-hours:minutes" and "days-hours:minutes:seconds".
--checkpoint-dir=<directory>
Specifies the directory into which the job or job step's checkpoint should be written (used by the
checkpoint/blcr and checkpoint/xlch plugins only). The default value is the current working
directory. Checkpoint files will be of the form "<job_id>.ckpt" for jobs and
"<job_id>.<step_id>.ckpt" for job steps.
--comment=<string>
An arbitrary comment.
-C, --constraint=<list>
Nodes can have features assigned to them by the Slurm administrator. Users can specify which of
these features are required by their job using the constraint option. Only nodes having features
matching the job constraints will be used to satisfy the request. Multiple constraints may be
specified with AND, OR, matching OR, resource counts, etc. Supported constraint options include:
Single Name
Only nodes which have the specified feature will be used. For example,
--constraint="intel"
Node Count
A request can specify the number of nodes needed with some feature by appending an asterisk
and count after the feature name. For example "--nodes=16 --constraint=graphics*4 ..."
indicates that the job requires 16 nodes and that at least four of those nodes must have
the feature "graphics."
AND If only nodes with all of specified features will be used. The ampersand is used for an
AND operator. For example, --constraint="intel&gpu"
OR If only nodes with at least one of specified features will be used. The vertical bar is
used for an OR operator. For example, --constraint="intel|amd"
Matching OR
If only one of a set of possible options should be used for all allocated nodes, then use
the OR operator and enclose the options within square brackets. For example:
"--constraint=[rack1|rack2|rack3|rack4]" might be used to specify that all nodes must be
allocated on a single rack of the cluster, but any of those four racks can be used.
Multiple Counts
Specific counts of multiple resources may be specified by using the AND operator and
enclosing the options within square brackets. For example:
"--constraint=[rack1*2&rack2*4]" might be used to specify that two nodes must be allocated
from nodes with the feature of "rack1" and four nodes must be allocated from nodes with the
feature "rack2".
WARNING: When srun is executed from within salloc or sbatch,
the constraint value can only contain a single feature name. None of the other operators are
currently supported for job steps.
--contiguous
If set, then the allocated nodes must form a contiguous set. Not honored with the topology/tree
or topology/3d_torus plugins, both of which can modify the node ordering. Not honored for a job
step's allocation.
--cores-per-socket=<cores>
Restrict node selection to nodes with at least the specified number of cores per socket. See
additional information under -B option above when task/affinity plugin is enabled.
--cpu_bind=[{quiet,verbose},]type
Bind tasks to CPUs. Used only when the task/affinity or task/cgroup plugin is enabled. The
configuration parameter TaskPluginParam may override these options. For example, if
TaskPluginParam is configured to bind to cores, your job will not be able to bind tasks to
sockets. NOTE: To have Slurm always report on the selected CPU binding for all commands executed
in a shell, you can enable verbose mode by setting the SLURM_CPU_BIND environment variable value
to "verbose".
The following informational environment variables are set when --cpu_bind is in use:
SLURM_CPU_BIND_VERBOSE
SLURM_CPU_BIND_TYPE
SLURM_CPU_BIND_LIST
See the ENVIRONMENT VARIABLES section for a more detailed description of the individual
SLURM_CPU_BIND variables. These variable are available only if the task/affinity plugin is
configured.
When using --cpus-per-task to run multithreaded tasks, be aware that CPU binding is inherited from
the parent of the process. This means that the multithreaded task should either specify or clear
the CPU binding itself to avoid having all threads of the multithreaded task use the same mask/CPU
as the parent. Alternatively, fat masks (masks which specify more than one allowed CPU) could be
used for the tasks in order to provide multiple CPUs for the multithreaded tasks.
By default, a job step has access to every CPU allocated to the job. To ensure that distinct CPUs
are allocated to each job step, use the --exclusive option.
Note that a job step can be allocated different numbers of CPUs on each node or be allocated CPUs
not starting at location zero. Therefore one of the options which automatically generate the task
binding is recommended. Explicitly specified masks or bindings are only honored when the job step
has been allocated every available CPU on the node.
Binding a task to a NUMA locality domain means to bind the task to the set of CPUs that belong to
the NUMA locality domain or "NUMA node". If NUMA locality domain options are used on systems with
no NUMA support, then each socket is considered a locality domain.
Auto Binding
Applies only when task/affinity is enabled. If the job step allocation includes an
allocation with a number of sockets, cores, or threads equal to the number of tasks times
cpus-per-task, then the tasks will by default be bound to the appropriate resources (auto
binding). Disable this mode of operation by explicitly setting "--cpu_bind=none". Use
TaskPluginParam=autobind=[threads|cores|sockets] to set a default cpu binding in case "auto
binding" doesn't find a match.
Supported options include:
q[uiet]
Quietly bind before task runs (default)
v[erbose]
Verbosely report binding before task runs
no[ne] Do not bind tasks to CPUs (default unless auto binding is applied)
rank Automatically bind by task rank. The lowest numbered task on each node is bound to
socket (or core or thread) zero, etc. Not supported unless the entire node is
allocated to the job.
map_cpu:<list>
Bind by mapping CPU IDs to tasks as specified where <list> is
<cpuid1>,<cpuid2>,...<cpuidN>. The mapping is specified for a node and identical
mapping is applied to the tasks on every node (i.e. the lowest task ID on each node
is mapped to the first CPU ID specified in the list, etc.). CPU IDs are interpreted
as decimal values unless they are preceded with '0x' in which case they are
interpreted as hexadecimal values. Not supported unless the entire node is
allocated to the job.
mask_cpu:<list>
Bind by setting CPU masks on tasks as specified where <list> is
<mask1>,<mask2>,...<maskN>. The mapping is specified for a node and identical
mapping is applied to the tasks on every node (i.e. the lowest task ID on each node
is mapped to the first mask specified in the list, etc.). CPU masks are always
interpreted as hexadecimal values but can be preceded with an optional '0x'. Not
supported unless the entire node is allocated to the job.
rank_ldom
Bind to a NUMA locality domain by rank. Not supported unless the entire node is
allocated to the job.
map_ldom:<list>
Bind by mapping NUMA locality domain IDs to tasks as specified where <list> is
<ldom1>,<ldom2>,...<ldomN>. The locality domain IDs are interpreted as decimal
values unless they are preceded with '0x' in which case they are interpreted as
hexadecimal values. Not supported unless the entire node is allocated to the job.
mask_ldom:<list>
Bind by setting NUMA locality domain masks on tasks as specified where <list> is
<mask1>,<mask2>,...<maskN>. NUMA locality domain masks are always interpreted as
hexadecimal values but can be preceded with an optional '0x'. Not supported unless
the entire node is allocated to the job.
sockets
Automatically generate masks binding tasks to sockets. Only the CPUs on the socket
which have been allocated to the job will be used. If the number of tasks differs
from the number of allocated sockets this can result in sub-optimal binding.
cores Automatically generate masks binding tasks to cores. If the number of tasks differs
from the number of allocated cores this can result in sub-optimal binding.
threads
Automatically generate masks binding tasks to threads. If the number of tasks
differs from the number of allocated threads this can result in sub-optimal binding.
ldoms Automatically generate masks binding tasks to NUMA locality domains. If the number
of tasks differs from the number of allocated locality domains this can result in
sub-optimal binding.
boards Automatically generate masks binding tasks to boards. If the number of tasks
differs from the number of allocated boards this can result in sub-optimal binding.
This option is supported by the task/cgroup plugin only.
help Show help message for cpu_bind
--cpu-freq =<p1[-p2[:p3]]>
Request that the job step initiated by this srun command be run at some requested frequency if
possible, on the CPUs selected for the step on the compute node(s).
p1 can be [#### | low | medium | high | highm1] which will set the frequency scaling_speed to the
corresponding value, and set the frequency scaling_governor to UserSpace. See below for definition
of the values.
p1 can be [Conservative | OnDemand | Performance | PowerSave] which will set the scaling_governor
to the corresponding value. The governor has to be in the list set by the slurm.conf option
CpuFreqGovernors.
When p2 is present, p1 will be the minimum scaling frequency and p2 will be the maximum scaling
frequency.
p2 can be [#### | medium | high | highm1] p2 must be greater than p1.
p3 can be [Conservative | OnDemand | Performance | PowerSave | UserSpace] which will set the
governor to the corresponding value.
If p3 is UserSpace, the frequency scaling_speed will be set by a power or energy aware scheduling
strategy to a value between p1 and p2 that lets the job run within the site's power goal. The job
may be delayed if p1 is higher than a frequency that allows the job to run withing the goal.
If the current frequency is < min, it will be set to min. Likewise, if the current frequency is >
max, it will be set to max.
Acceptable values at present include:
#### frequency in kilohertz
Low the lowest available frequency
High the highest available frequency
HighM1 (high minus one) will select the next highest available frequency
Medium attempts to set a frequency in the middle of the available range
Conservative attempts to use the Conservative CPU governor
OnDemand attempts to use the OnDemand CPU governor (the default value)
Performance attempts to use the Performance CPU governor
PowerSave attempts to use the PowerSave CPU governor
UserSpace attempts to use the UserSpace CPU governor
The following informational environment variable is set in the job
step when --cpu-freq option is requested.
SLURM_CPU_FREQ_REQ
This environment variable can also be used to supply the value for the CPU frequency request if it
is set when the 'srun' command is issued. The --cpu-freq on the command line will override the
environment variable value. The form on the environment variable is the same as the command line.
See the ENVIRONMENT VARIABLES section for a description of the SLURM_CPU_FREQ_REQ variable.
NOTE: This parameter is treated as a request, not a requirement. If the job step's node does not
support setting the CPU frequency, or the requested value is outside the bounds of the legal
frequencies, an error is logged, but the job step is allowed to continue.
NOTE: Setting the frequency for just the CPUs of the job step implies that the tasks are confined
to those CPUs. If task confinement (i.e., TaskPlugin=task/affinity or TaskPlugin=task/cgroup with
the "ConstrainCores" option) is not configured, this parameter is ignored.
NOTE: When the step completes, the frequency and governor of each selected CPU is reset to the
configured CpuFreqDef value with a default value of the OnDemand CPU governor.
NOTE: When submitting jobs with the --cpu-freq option with linuxproc as the ProctrackType can
cause jobs to run too quickly before Accounting is able to poll for job information. As a result
not all of accounting information will be present.
-c, --cpus-per-task=<ncpus>
Request that ncpus be allocated per process. This may be useful if the job is multithreaded and
requires more than one CPU per task for optimal performance. The default is one CPU per process.
If -c is specified without -n, as many tasks will be allocated per node as possible while
satisfying the -c restriction. For instance on a cluster with 8 CPUs per node, a job request for 4
nodes and 3 CPUs per task may be allocated 3 or 6 CPUs per node (1 or 2 tasks per node) depending
upon resource consumption by other jobs. Such a job may be unable to execute more than a total of
4 tasks. This option may also be useful to spawn tasks without allocating resources to the job
step from the job's allocation when running multiple job steps with the --exclusive option.
WARNING: There are configurations and options interpreted differently by job and job step requests
which can result in inconsistencies for this option. For example srun -c2 --threads-per-core=1
prog may allocate two cores for the job, but if each of those cores contains two threads, the job
allocation will include four CPUs. The job step allocation will then launch two threads per CPU
for a total of two tasks.
WARNING: When srun is executed from within salloc or sbatch, there are configurations and options
which can result in inconsistent allocations when -c has a value greater than -c on salloc or
sbatch.
-d, --dependency=<dependency_list>
Defer the start of this job until the specified dependencies have been satisfied completed. This
option does not apply to job steps (executions of srun within an existing salloc or sbatch
allocation) only to job allocations. <dependency_list> is of the form
<type:job_id[:job_id][,type:job_id[:job_id]]> or <type:job_id[:job_id][?type:job_id[:job_id]]>.
All dependencies must be satisfied if the "," separator is used. Any dependency may be satisfied
if the "?" separator is used. Many jobs can share the same dependency and these jobs may even
belong to different users. The value may be changed after job submission using the scontrol
command. Once a job dependency fails due to the termination state of a preceding job, the
dependent job will never be run, even if the preceding job is requeued and has a different
termination state in a subsequent execution.
after:job_id[:jobid...]
This job can begin execution after the specified jobs have begun execution.
afterany:job_id[:jobid...]
This job can begin execution after the specified jobs have terminated.
afternotok:job_id[:jobid...]
This job can begin execution after the specified jobs have terminated in some failed state
(non-zero exit code, node failure, timed out, etc).
afterok:job_id[:jobid...]
This job can begin execution after the specified jobs have successfully executed (ran to
completion with an exit code of zero).
expand:job_id
Resources allocated to this job should be used to expand the specified job. The job to
expand must share the same QOS (Quality of Service) and partition. Gang scheduling of
resources in the partition is also not supported.
singleton
This job can begin execution after any previously launched jobs sharing the same job name
and user have terminated.
-D, --chdir=<path>
Have the remote processes do a chdir to path before beginning execution. The default is to chdir
to the current working directory of the srun process. The path can be specified as full path or
relative path to the directory where the command is executed.
-e, --error=<mode>
Specify how stderr is to be redirected. By default in interactive mode, srun redirects stderr to
the same file as stdout, if one is specified. The --error option is provided to allow stdout and
stderr to be redirected to different locations. See IO Redirection below for more options. If
the specified file already exists, it will be overwritten.
-E, --preserve-env
Pass the current values of environment variables SLURM_NNODES and SLURM_NTASKS through to the
executable, rather than computing them from commandline parameters.
--epilog=<executable>
srun will run executable just after the job step completes. The command line arguments for
executable will be the command and arguments of the job step. If executable is "none", then no
srun epilog will be run. This parameter overrides the SrunEpilog parameter in slurm.conf. This
parameter is completely independent from the Epilog parameter in slurm.conf.
--exclusive[=user]
This option has two slightly different meanings for job and job step allocations. When used to
initiate a job, the job allocation cannot share nodes with other running jobs (or just other
users with the "=user" option). The default shared/exclusive behavior depends on system
configuration and the partition's Shared option takes precedence over the job's option.
This option can also be used when initiating more than one job step within an existing resource
allocation, where you want separate processors to be dedicated to each job step. If sufficient
processors are not available to initiate the job step, it will be deferred. This can be thought of
as providing a mechanism for resource management to the job within it's allocation.
The exclusive allocation of CPUs only applies to job steps explicitly invoked with the --exclusive
option. For example, a job might be allocated one node with four CPUs and a remote shell invoked
on the allocated node. If that shell is not invoked with the --exclusive option, then it may
create a job step with four tasks using the --exclusive option and not conflict with the remote
shell's resource allocation. Use the --exclusive option to invoke every job step to insure
distinct resources for each step.
Note that all CPUs allocated to a job are available to each job step unless the --exclusive option
is used plus task affinity is configured. Since resource management is provided by processor, the
--ntasks option must be specified, but the following options should NOT be specified --relative,
--distribution=arbitrary. See EXAMPLE below.
--export=<environment variables | NONE>
Identify which environment variables are propagated to the launched application. Multiple
environment variable names should be comma separated. Environment variable names may be specified
to propagate the current value of those variables (e.g. "--export=EDITOR") or specific values for
the variables may be exported (e.g.. "--export=EDITOR=/bin/vi") in addition to the environment
variables that would otherwise be set. By default all environment variables are propagated.
--gid=<group>
If srun is run as root, and the --gid option is used, submit the job with group's group access
permissions. group may be the group name or the numerical group ID.
--gres=<list>
Specifies a comma delimited list of generic consumable resources. The format of each entry on the
list is "name[[:type]:count]". The name is that of the consumable resource. The count is the
number of those resources with a default value of 1. The specified resources will be allocated to
the job on each node. The available generic consumable resources is configurable by the system
administrator. A list of available generic consumable resources will be printed and the command
will exit if the option argument is "help". Examples of use include "--gres=gpu:2,mic=1",
"--gres=gpu:kepler:2", and "--gres=help". NOTE: By default, a job step is allocated all of the
generic resources that have allocated to the job. To change the behavior so that each job step is
allocated no generic resources, explicitly set the value of --gres to specify zero counts for each
generic resource OR set "--gres=none" OR set the SLURM_STEP_GRES environment variable to "none".
-H, --hold
Specify the job is to be submitted in a held state (priority of zero). A held job can now be
released using scontrol to reset its priority (e.g. "scontrol release <job_id>").
-h, --help
Display help information and exit.
--hint=<type>
Bind tasks according to application hints.
compute_bound
Select settings for compute bound applications: use all cores in each socket, one thread
per core.
memory_bound
Select settings for memory bound applications: use only one core in each socket, one thread
per core.
[no]multithread
[don't] use extra threads with in-core multi-threading which can benefit communication
intensive applications. Only supported with the task/affinity plugin.
help show this help message
-I, --immediate[=<seconds>]
exit if resources are not available within the time period specified. If no argument is given,
resources must be available immediately for the request to succeed. By default, --immediate is
off, and the command will block until resources become available. Since this option's argument is
optional, for proper parsing the single letter option must be followed immediately with the value
and not include a space between them. For example "-I60" and not "-I 60".
-i, --input=<mode>
Specify how stdin is to redirected. By default, srun redirects stdin from the terminal all tasks.
See IO Redirection below for more options. For OS X, the poll() function does not support stdin,
so input from a terminal is not possible.
-J, --job-name=<jobname>
Specify a name for the job. The specified name will appear along with the job id number when
querying running jobs on the system. The default is the supplied executable program's name. NOTE:
This information may be written to the slurm_jobacct.log file. This file is space delimited so if
a space is used in the jobname name it will cause problems in properly displaying the contents of
the slurm_jobacct.log file when the sacct command is used.
--jobid=<jobid>
Initiate a job step under an already allocated job with job id id. Using this option will cause
srun to behave exactly as if the SLURM_JOB_ID environment variable was set.
-K, --kill-on-bad-exit[=0|1]
Controls whether or not to terminate a job if any task exits with a non-zero exit code. If this
option is not specified, the default action will be based upon the Slurm configuration parameter
of KillOnBadExit. If this option is specified, it will take precedence over KillOnBadExit. An
option argument of zero will not terminate the job. A non-zero argument or no argument will
terminate the job. Note: This option takes precedence over the -W, --wait option to terminate the
job immediately if a task exits with a non-zero exit code. Since this option's argument is
optional, for proper parsing the single letter option must be followed immediately with the value
and not include a space between them. For example "-K1" and not "-K 1".
-k, --no-kill
Do not automatically terminate a job if one of the nodes it has been allocated fails. This option
is only recognized on a job allocation, not for the submission of individual job steps. The job
will assume all responsibilities for fault-tolerance. Tasks launch using this option will not be
considered terminated (e.g. -K, --kill-on-bad-exit and -W, --wait options will have no effect upon
the job step). The active job step (MPI job) will likely suffer a fatal error, but subsequent job
steps may be run if this option is specified. The default action is to terminate the job upon
node failure.
--launch-cmd
Print external launch command instead of running job normally through Slurm. This option is only
valid if using something other than the launch/slurm plugin.
--launcher-opts=<options>
Options for the external launcher if using something other than the launch/slurm plugin.
-l, --label
Prepend task number to lines of stdout/err. The --label option will prepend lines of output with
the remote task id.
-L, --licenses=<license>
Specification of licenses (or other resources available on all nodes of the cluster) which must be
allocated to this job. License names can be followed by a colon and count (the default count is
one). Multiple license names should be comma separated (e.g. "--licenses=foo:4,bar").
-m, --distribution=
*|block|cyclic|arbitrary|plane=<options> [:*|block|cyclic|fcyclic[:*|block|
cyclic|fcyclic]][,Pack|NoPack]
Specify alternate distribution methods for remote processes. This option controls the
distribution of tasks to the nodes on which resources have been allocated, and the distribution of
those resources to tasks for binding (task affinity). The first distribution method (before the
first ":") controls the distribution of tasks to nodes. The second distribution method (after the
first ":") controls the distribution of allocated CPUs across sockets for binding to tasks. The
third distribution method (after the second ":") controls the distribution of allocated CPUs
across cores for binding to tasks. The second and third distributions apply only if task affinity
is enabled. The third distribution is supported only if the task/cgroup plugin is configured. The
default value for each distribution type is specified by *.
Note that with select/cons_res, the number of CPUs allocated on each socket and node may be
different. Refer to http://slurm.schedmd.com/mc_support.html for more information on resource
allocation, distribution of tasks to nodes, and binding of tasks to CPUs.
First distribution method (distribution of tasks across nodes):
* Use the default method for distributing tasks to nodes (block).
block The block distribution method will distribute tasks to a node such that consecutive tasks
share a node. For example, consider an allocation of three nodes each with two cpus. A
four-task block distribution request will distribute those tasks to the nodes with tasks
one and two on the first node, task three on the second node, and task four on the third
node. Block distribution is the default behavior if the number of tasks exceeds the number
of allocated nodes.
cyclic The cyclic distribution method will distribute tasks to a node such that consecutive tasks
are distributed over consecutive nodes (in a round-robin fashion). For example, consider an
allocation of three nodes each with two cpus. A four-task cyclic distribution request will
distribute those tasks to the nodes with tasks one and four on the first node, task two on
the second node, and task three on the third node. Note that when SelectType is
select/cons_res, the same number of CPUs may not be allocated on each node. Task
distribution will be round-robin among all the nodes with CPUs yet to be assigned to tasks.
Cyclic distribution is the default behavior if the number of tasks is no larger than the
number of allocated nodes.
plane The tasks are distributed in blocks of a specified size. The options include a number
representing the size of the task block. This is followed by an optional specification of
the task distribution scheme within a block of tasks and between the blocks of tasks. The
number of tasks distributed to each node is the same as for cyclic distribution, but the
taskids assigned to each node depend on the plane size. For more details (including
examples and diagrams), please see
http://slurm.schedmd.com/mc_support.html
and
http://slurm.schedmd.com/dist_plane.html
arbitrary
The arbitrary method of distribution will allocate processes in-order as listed in file
designated by the environment variable SLURM_HOSTFILE. If this variable is listed it will
over ride any other method specified. If not set the method will default to block. Inside
the hostfile must contain at minimum the number of hosts requested and be one per line or
comma separated. If specifying a task count (-n, --ntasks=<number>), your tasks will be
laid out on the nodes in the order of the file.
NOTE: The arbitrary distribution option on a job allocation only controls the nodes to be
allocated to the job and not the allocation of CPUs on those nodes. This option is meant
primarily to control a job step's task layout in an existing job allocation for the srun
command.
Second distribution method (distribution of CPUs across sockets for binding):
* Use the default method for distributing CPUs across sockets (cyclic).
block The block distribution method will distribute allocated CPUs consecutively from the same
socket for binding to tasks, before using the next consecutive socket.
cyclic The cyclic distribution method will distribute allocated CPUs for binding to a given task
consecutively from the same socket, and from the next consecutive socket for the next task,
in a round-robin fashion across sockets.
fcyclic
The fcyclic distribution method will distribute allocated CPUs for binding to tasks from
consecutive sockets in a round-robin fashion across the sockets.
Third distribution method (distribution of CPUs across cores for binding):
* Use the default method for distributing CPUs across cores (inherited from second
distribution method).
block The block distribution method will distribute allocated CPUs consecutively from the same
core for binding to tasks, before using the next consecutive core.
cyclic The cyclic distribution method will distribute allocated CPUs for binding to a given task
consecutively from the same core, and from the next consecutive core for the next task, in
a round-robin fashion across cores.
fcyclic
The fcyclic distribution method will distribute allocated CPUs for binding to tasks from
consecutive cores in a round-robin fashion across the cores.
Optional control for task distribution over nodes:
Pack Rather than evenly distributing a job step's tasks evenly across it's allocated nodes, pack
them as tightly as possible on the nodes.
NoPack Rather than packing a job step's tasks as tightly as possible on the nodes, distribute them
evenly. This user option will supersede the SelectTypeParameters CR_Pack_Nodes
configuration parameter.
--mail-type=<type>
Notify user by email when certain event types occur. Valid type values are NONE, BEGIN, END,
FAIL, REQUEUE, ALL (equivalent to BEGIN, END, FAIL, REQUEUE, and STAGE_OUT), STAGE_OUT (burst
buffer stage out completed), TIME_LIMIT, TIME_LIMIT_90 (reached 90 percent of time limit),
TIME_LIMIT_80 (reached 80 percent of time limit), and TIME_LIMIT_50 (reached 50 percent of time
limit). Multiple type values may be specified in a comma separated list. The user to be notified
is indicated with --mail-user.
--mail-user=<user>
User to receive email notification of state changes as defined by --mail-type. The default value
is the submitting user.
--mem=<MB>
Specify the real memory required per node in MegaBytes. Default value is DefMemPerNode and the
maximum value is MaxMemPerNode. If configured, both of parameters can be seen using the scontrol
show config command. This parameter would generally be used if whole nodes are allocated to jobs
(SelectType=select/linear). Specifying a memory limit of zero for a job step will restrict the
job step to the amount of memory allocated to the job, but not remove any of the job's memory
allocation from being available to other job steps. Also see --mem-per-cpu. --mem and
--mem-per-cpu are mutually exclusive. NOTE: A memory size specification is treated as a special
case and grants the job access to all of the memory on each node. NOTE: Enforcement of memory
limits currently relies upon the task/cgroup plugin or enabling of accounting, which samples
memory use on a periodic basis (data need not be stored, just collected). In both cases memory use
is based upon the job's Resident Set Size (RSS). A task may exceed the memory limit until the next
periodic accounting sample.
--mem-per-cpu=<MB>
Minimum memory required per allocated CPU in MegaBytes. Default value is DefMemPerCPU and the
maximum value is MaxMemPerCPU (see exception below). If configured, both of parameters can be seen
using the scontrol show config command. Note that if the job's --mem-per-cpu value exceeds the
configured MaxMemPerCPU, then the user's limit will be treated as a memory limit per task;
--mem-per-cpu will be reduced to a value no larger than MaxMemPerCPU; --cpus-per-task will be set
and the value of --cpus-per-task multiplied by the new --mem-per-cpu value will equal the original
--mem-per-cpu value specified by the user. This parameter would generally be used if individual
processors are allocated to jobs (SelectType=select/cons_res). If resources are allocated by the
core, socket or whole nodes; the number of CPUs allocated to a job may be higher than the task
count and the value of --mem-per-cpu should be adjusted accordingly. Specifying a memory limit of
zero for a job step will restrict the job step to the amount of memory allocated to the job, but
not remove any of the job's memory allocation from being available to other job steps. Also see
--mem. --mem and --mem-per-cpu are mutually exclusive.
--mem_bind=[{quiet,verbose},]type
Bind tasks to memory. Used only when the task/affinity plugin is enabled and the NUMA memory
functions are available. Note that the resolution of CPU and memory binding may differ on some
architectures. For example, CPU binding may be performed at the level of the cores within a
processor while memory binding will be performed at the level of nodes, where the definition of
"nodes" may differ from system to system. The use of any type other than "none" or "local" is not
recommended. If you want greater control, try running a simple test code with the options
"--cpu_bind=verbose,none --mem_bind=verbose,none" to determine the specific configuration.
NOTE: To have Slurm always report on the selected memory binding for all commands executed in a
shell, you can enable verbose mode by setting the SLURM_MEM_BIND environment variable value to
"verbose".
The following informational environment variables are set when --mem_bind is in use:
SLURM_MEM_BIND_VERBOSE
SLURM_MEM_BIND_TYPE
SLURM_MEM_BIND_LIST
See the ENVIRONMENT VARIABLES section for a more detailed description of the individual
SLURM_MEM_BIND* variables.
Supported options include:
q[uiet]
quietly bind before task runs (default)
v[erbose]
verbosely report binding before task runs
no[ne] don't bind tasks to memory (default)
rank bind by task rank (not recommended)
local Use memory local to the processor in use
map_mem:<list>
bind by mapping a node's memory to tasks as specified where <list> is
<cpuid1>,<cpuid2>,...<cpuidN>. CPU IDs are interpreted as decimal values unless they are
preceded with '0x' in which case they interpreted as hexadecimal values (not recommended)
mask_mem:<list>
bind by setting memory masks on tasks as specified where <list> is
<mask1>,<mask2>,...<maskN>. memory masks are always interpreted as hexadecimal values.
Note that masks must be preceded with a '0x' if they don't begin with [0-9] so they are
seen as numerical values by srun.
help show this help message
--mincpus=<n>
Specify a minimum number of logical cpus/processors per node.
--msg-timeout=<seconds>
Modify the job launch message timeout. The default value is MessageTimeout in the Slurm
configuration file slurm.conf. Changes to this are typically not recommended, but could be useful
to diagnose problems.
--mpi=<mpi_type>
Identify the type of MPI to be used. May result in unique initiation procedures.
list Lists available mpi types to choose from.
lam Initiates one 'lamd' process per node and establishes necessary environment variables for
LAM/MPI.
mpich1_shmem
Initiates one process per node and establishes necessary environment variables for mpich1
shared memory model. This also works for mvapich built for shared memory.
mpichgm
For use with Myrinet.
mvapich
For use with Infiniband.
openmpi
For use with OpenMPI.
pmi2 To enable PMI2 support. The PMI2 support in Slurm works only if the MPI implementation
supports it, in other words if the MPI has the PMI2 interface implemented. The --mpi=pmi2
will load the library lib/slurm/mpi_pmi2.so which provides the server side functionality
but the client side must implement PMI2_Init() and the other interface calls.
none No special MPI processing. This is the default and works with many other versions of MPI.
--multi-prog
Run a job with different programs and different arguments for each task. In this case, the
executable program specified is actually a configuration file specifying the executable and
arguments for each task. See MULTIPLE PROGRAM CONFIGURATION below for details on the configuration
file contents.
-N, --nodes=<minnodes[-maxnodes]>
Request that a minimum of minnodes nodes be allocated to this job. A maximum node count may also
be specified with maxnodes. If only one number is specified, this is used as both the minimum and
maximum node count. The partition's node limits supersede those of the job. If a job's node
limits are outside of the range permitted for its associated partition, the job will be left in a
PENDING state. This permits possible execution at a later time, when the partition limit is
changed. If a job node limit exceeds the number of nodes configured in the partition, the job
will be rejected. Note that the environment variable SLURM_JOB_NUM_NODES (and SLURM_NNODES for
backwards compatibility) will be set to the count of nodes actually allocated to the job. See the
ENVIRONMENT VARIABLES section for more information. If -N is not specified, the default behavior
is to allocate enough nodes to satisfy the requirements of the -n and -c options. The job will be
allocated as many nodes as possible within the range specified and without delaying the initiation
of the job. The node count specification may include a numeric value followed by a suffix of "k"
(multiplies numeric value by 1,024) or "m" (multiplies numeric value by 1,048,576).
-n, --ntasks=<number>
Specify the number of tasks to run. Request that srun allocate resources for ntasks tasks. The
default is one task per node, but note that the --cpus-per-task option will change this default.
--network=<type>
Specify information pertaining to the switch or network. The interpretation of type is system
dependent. This option is supported when running Slurm on a Cray natively. It is used to request
using Network Performace Counters. Only one value per request is valid. All options are case
in-sensitive. In this configuration supported values include:
system
Use the system-wide network performance counters. Only nodes requested will be marked in use
for the job allocation. If the job does not fill up the entire system the rest of the nodes
are not able to be used by other jobs using NPC, if idle their state will appear as
PerfCnts. These nodes are still available for other jobs not using NPC.
blade Use the blade network performance counters. Only nodes requested will be marked in use for
the job allocation. If the job does not fill up the entire blade(s) allocated to the job
those blade(s) are not able to be used by other jobs using NPC, if idle their state will
appear as PerfCnts. These nodes are still available for other jobs not using NPC.
In all cases the job or step allocation request must specify the
--exclusive option. Otherwise the request will be denied.
Also with any of these options steps are not allowed to share blades, so resources would remain
idle inside an allocation if the step running on a blade does not take up all the nodes on the
blade.
The network option is also supported on systems with IBM's Parallel Environment (PE). See IBM's
LoadLeveler job command keyword documentation about the keyword "network" for more information.
Multiple values may be specified in a comma separated list. All options are case in-sensitive.
Supported values include:
BULK_XFER[=<resources>]
Enable bulk transfer of data using Remote Direct-Memory Access (RDMA). The optional
resources specification is a numeric value which can have a suffix of "k", "K", "m",
"M", "g" or "G" for kilobytes, megabytes or gigabytes. NOTE: The resources
specification is not supported by the underlying IBM infrastructure as of Parallel
Environment version 2.2 and no value should be specified at this time. The devices
allocated to a job must all be of the same type. The default value depends upon
depends upon what hardware is available and in order of preferences is IPONLY (which
is not considered in User Space mode), HFI, IB, HPCE, and KMUX.
CAU=<count> Number of Collective Acceleration Units (CAU) required. Applies only to IBM Power7-IH
processors. Default value is zero. Independent CAU will be allocated for each
programming interface (MPI, LAPI, etc.)
DEVNAME=<name>
Specify the device name to use for communications (e.g. "eth0" or "mlx4_0").
DEVTYPE=<type>
Specify the device type to use for communications. The supported values of type are:
"IB" (InfiniBand), "HFI" (P7 Host Fabric Interface), "IPONLY" (IP-Only interfaces),
"HPCE" (HPC Ethernet), and "KMUX" (Kernel Emulation of HPCE). The devices allocated
to a job must all be of the same type. The default value depends upon depends upon
what hardware is available and in order of preferences is IPONLY (which is not
considered in User Space mode), HFI, IB, HPCE, and KMUX.
IMMED =<count>
Number of immediate send slots per window required. Applies only to IBM Power7-IH
processors. Default value is zero.
INSTANCES =<count>
Specify number of network connections for each task on each network connection. The
default instance count is 1.
IPV4 Use Internet Protocol (IP) version 4 communications (default).
IPV6 Use Internet Protocol (IP) version 6 communications.
LAPI Use the LAPI programming interface.
MPI Use the MPI programming interface. MPI is the default interface.
PAMI Use the PAMI programming interface.
SHMEM Use the OpenSHMEM programming interface.
SN_ALL Use all available switch networks (default).
SN_SINGLE Use one available switch network.
UPC Use the UPC programming interface.
US Use User Space communications.
Some examples of network specifications:
Instances=2,US,MPI,SN_ALL
Create two user space connections for MPI communications on every switch network for
each task.
US,MPI,Instances=3,Devtype=IB
Create three user space connections for MPI communications on every InfiniBand network
for each task.
IPV4,LAPI,SN_Single
Create a IP version 4 connection for LAPI communications on one switch network for
each task.
Instances=2,US,LAPI,MPI
Create two user space connections each for LAPI and MPI communications on every switch
network for each task. Note that SN_ALL is the default option so every switch network
is used. Also note that Instances=2 specifies that two connections are established for
each protocol (LAPI and MPI) and each task. If there are two networks and four tasks
on the node then a total of 32 connections are established (2 instances x 2 protocols
x 2 networks x 4 tasks).
--nice[=adjustment]
Run the job with an adjusted scheduling priority within Slurm. With no adjustment value the
scheduling priority is decreased by 100. The adjustment range is from -10000 (highest priority) to
10000 (lowest priority). Only privileged users can specify a negative adjustment. NOTE: This
option is presently ignored if SchedulerType=sched/wiki or SchedulerType=sched/wiki2.
--ntasks-per-core=<ntasks>
Request the maximum ntasks be invoked on each core. This option applies to the job allocation,
but not to step allocations. Meant to be used with the --ntasks option. Related to
--ntasks-per-node except at the core level instead of the node level. Masks will automatically be
generated to bind the tasks to specific core unless --cpu_bind=none is specified. NOTE: This
option is not supported unless SelectTypeParameters=CR_Core or SelectTypeParameters=CR_Core_Memory
is configured.
--ntasks-per-node=<ntasks>
Request that ntasks be invoked on each node. If used with the --ntasks option, the --ntasks
option will take precedence and the --ntasks-per-node will be treated as a maximum count of tasks
per node. Meant to be used with the --nodes option. This is related to --cpus-per-task=ncpus,
but does not require knowledge of the actual number of cpus on each node. In some cases, it is
more convenient to be able to request that no more than a specific number of tasks be invoked on
each node. Examples of this include submitting a hybrid MPI/OpenMP app where only one MPI
"task/rank" should be assigned to each node while allowing the OpenMP portion to utilize all of
the parallelism present in the node, or submitting a single setup/cleanup/monitoring job to each
node of a pre-existing allocation as one step in a larger job script.
--ntasks-per-socket=<ntasks>
Request the maximum ntasks be invoked on each socket. This option applies to the job allocation,
but not to step allocations. Meant to be used with the --ntasks option. Related to
--ntasks-per-node except at the socket level instead of the node level. Masks will automatically
be generated to bind the tasks to specific sockets unless --cpu_bind=none is specified. NOTE:
This option is not supported unless SelectTypeParameters=CR_Socket or
SelectTypeParameters=CR_Socket_Memory is configured.
-O, --overcommit
Overcommit resources. When applied to job allocation, only one CPU is allocated to the job per
node and options used to specify the number of tasks per node, socket, core, etc. are ignored.
When applied to job step allocations (the srun command when executed within an existing job
allocation), this option can be used to launch more than one task per CPU. Normally, srun will
not allocate more than one process per CPU. By specifying --overcommit you are explicitly
allowing more than one process per CPU. However no more than MAX_TASKS_PER_NODE tasks are
permitted to execute per node. NOTE: MAX_TASKS_PER_NODE is defined in the file slurm.h and is not
a variable, it is set at Slurm build time.
-o, --output=<mode>
Specify the mode for stdout redirection. By default in interactive mode, srun collects stdout from
all tasks and sends this output via TCP/IP to the attached terminal. With --output stdout may be
redirected to a file, to one file per task, or to /dev/null. See section IO Redirection below for
the various forms of mode. If the specified file already exists, it will be overwritten.
If --error is not also specified on the command line, both stdout and stderr will directed to the
file specified by --output.
--open-mode=<append|truncate>
Open the output and error files using append or truncate mode as specified. The default value is
specified by the system configuration parameter JobFileAppend.
-p, --partition=<partition_names>
Request a specific partition for the resource allocation. If not specified, the default behavior
is to allow the slurm controller to select the default partition as designated by the system
administrator. If the job can use more than one partition, specify their names in a comma separate
list and the one offering earliest initiation will be used with no regard given to the partition
name ordering (although higher priority partitions will be considered first). When the job is
initiated, the name of the partition used will be placed first in the job record partition string.
--power=<flags>
Comma separated list of power management plugin options. Currently available flags include: level
(all nodes allocated to the job should have identical power caps, may be disabled by the Slurm
configuration option PowerParameters=job_no_level).
--priority=<value>
Request a specific job priority. May be subject to configuration specific constraints. Only
Slurm operators and administrators can set the priority of a job.
--profile=<all|none|[energy[,|task[,|filesystem[,|network]]]]>
enables detailed data collection by the acct_gather_profile plugin. Detailed data are typically
time-series that are stored in an HDF5 file for the job.
All All data types are collected. (Cannot be combined with other values.)
None No data types are collected. This is the default.
(Cannot be combined with other values.)
Energy Energy data is collected.
Task Task (I/O, Memory, ...) data is collected.
Filesystem
Filesystem data is collected.
Network Network (InfiniBand) data is collected.
--prolog=<executable>
srun will run executable just before launching the job step. The command line arguments for
executable will be the command and arguments of the job step. If executable is "none", then no
srun prolog will be run. This parameter overrides the SrunProlog parameter in slurm.conf. This
parameter is completely independent from the Prolog parameter in slurm.conf.
--propagate[=rlimits]
Allows users to specify which of the modifiable (soft) resource limits to propagate to the compute
nodes and apply to their jobs. If rlimits is not specified, then all resource limits will be
propagated. The following rlimit names are supported by Slurm (although some options may not be
supported on some systems):
ALL All limits listed below
AS The maximum address space for a process
CORE The maximum size of core file
CPU The maximum amount of CPU time
DATA The maximum size of a process's data segment
FSIZE The maximum size of files created. Note that if the user sets FSIZE to less than the
current size of the slurmd.log, job launches will fail with a 'File size limit exceeded'
error.
MEMLOCK The maximum size that may be locked into memory
NOFILE The maximum number of open files
NPROC The maximum number of processes available
RSS The maximum resident set size
STACK The maximum stack size
--pty Execute task zero in pseudo terminal mode. Implicitly sets --unbuffered. Implicitly sets --error
and --output to /dev/null for all tasks except task zero, which may cause those tasks to exit
immediately (e.g. shells will typically exit immediately in that situation). Not currently
supported on AIX platforms.
-Q, --quiet
Suppress informational messages from srun. Errors will still be displayed.
-q, --quit-on-interrupt
Quit immediately on single SIGINT (Ctrl-C). Use of this option disables the status feature
normally available when srun receives a single Ctrl-C and causes srun to instead immediately
terminate the running job.
--qos=<qos>
Request a quality of service for the job. QOS values can be defined for each user/cluster/account
association in the Slurm database. Users will be limited to their association's defined set of
qos's when the Slurm configuration parameter, AccountingStorageEnforce, includes "qos" in it's
definition.
-r, --relative=<n>
Run a job step relative to node n of the current allocation. This option may be used to spread
several job steps out among the nodes of the current job. If -r is used, the current job step will
begin at node n of the allocated nodelist, where the first node is considered node 0. The -r
option is not permitted with -w or -x option and will result in a fatal error when not running
within a prior allocation (i.e. when SLURM_JOB_ID is not set). The default for n is 0. If the
value of --nodes exceeds the number of nodes identified with the --relative option, a warning
message will be printed and the --relative option will take precedence.
--reboot
Force the allocated nodes to reboot before starting the job. This is only supported with some
system configurations and will otherwise be silently ignored.
--resv-ports
Reserve communication ports for this job. Users can specify the number of port they want to
reserve. The parameter MpiParams=ports=12000-12999 must be specified in slurm.conf. If not
specified the default reserve number of ports equal to the number of tasks. If the number of
reserved ports is zero no ports is reserved. Used for OpenMPI.
--reservation=<name>
Allocate resources for the job from the named reservation.
--restart-dir=<directory>
Specifies the directory from which the job or job step's checkpoint should be read (used by the
checkpoint/blcrm and checkpoint/xlch plugins only).
-s, --share
The job allocation can share resources with other running jobs. The resources to be shared can be
nodes, sockets, cores, or hyperthreads depending upon configuration. The default shared behavior
depends on system configuration and the partition's Shared option takes precedence over the job's
option. This option may result in the allocation being granted sooner than if the --share option
was not set and allow higher system utilization, but application performance will likely suffer
due to competition for resources. Also see the --exclusive option.
-S, --core-spec=<num>
Count of specialized cores per node reserved by the job for system operations and not used by the
application. The application will not use these cores, but will be charged for their allocation.
Default value is dependent upon the node's configured CoreSpecCount value. If a value of zero is
designated and the Slurm configuration option AllowSpecResourcesUsage is enabled, the job will be
allowed to override CoreSpecCount and use the specialized resources on nodes it is allocated.
This option can not be used with the --thread-spec option.
--sicp Identify a job as one which jobs submitted to other clusters can be dependent upon.
--signal=<sig_num>[@<sig_time>]
When a job is within sig_time seconds of its end time, send it the signal sig_num. Due to the
resolution of event handling by Slurm, the signal may be sent up to 60 seconds earlier than
specified. sig_num may either be a signal number or name (e.g. "10" or "USR1"). sig_time must
have an integer value between 0 and 65535. By default, no signal is sent before the job's end
time. If a sig_num is specified without any sig_time, the default time will be 60 seconds.
--slurmd-debug=<level>
Specify a debug level for slurmd(8). The level may be specified either an integer value between 0
[quiet, only errors are displayed] and 4 [verbose operation] or the SlurmdDebug tags.
quiet Log nothing
fatal Log only fatal errors
error Log only errors
info Log errors and general informational messages
verbose Log errors and verbose informational messages
The slurmd debug information is copied onto the stderr of
the job. By default only errors are displayed.
--sockets-per-node=<sockets>
Restrict node selection to nodes with at least the specified number of sockets. See additional
information under -B option above when task/affinity plugin is enabled.
--switches=<count>[@<max-time>]
When a tree topology is used, this defines the maximum count of switches desired for the job
allocation and optionally the maximum time to wait for that number of switches. If Slurm finds an
allocation containing more switches than the count specified, the job remains pending until it
either finds an allocation with desired switch count or the time limit expires. It there is no
switch count limit, there is no delay in starting the job. Acceptable time formats include
"minutes", "minutes:seconds", "hours:minutes:seconds", "days-hours", "days-hours:minutes" and
"days-hours:minutes:seconds". The job's maximum time delay may be limited by the system
administrator using the SchedulerParameters configuration parameter with the max_switch_wait
parameter option. The default max-time is the max_switch_wait SchedulerParameters.
-T, --threads=<nthreads>
Allows limiting the number of concurrent threads used to send the job request from the srun
process to the slurmd processes on the allocated nodes. Default is to use one thread per allocated
node up to a maximum of 60 concurrent threads. Specifying this option limits the number of
concurrent threads to nthreads (less than or equal to 60). This should only be used to set a low
thread count for testing on very small memory computers.
-t, --time=<time>
Set a limit on the total run time of the job allocation. If the requested time limit exceeds the
partition's time limit, the job will be left in a PENDING state (possibly indefinitely). The
default time limit is the partition's default time limit. When the time limit is reached, each
task in each job step is sent SIGTERM followed by SIGKILL. The interval between signals is
specified by the Slurm configuration parameter KillWait. The OverTimeLimit configuration
parameter may permit the job to run longer than scheduled. Time resolution is one minute and
second values are rounded up to the next minute.
A time limit of zero requests that no time limit be imposed. Acceptable time formats include
"minutes", "minutes:seconds", "hours:minutes:seconds", "days-hours", "days-hours:minutes" and
"days-hours:minutes:seconds".
--task-epilog=<executable>
The slurmstepd daemon will run executable just after each task terminates. This will be executed
before any TaskEpilog parameter in slurm.conf is executed. This is meant to be a very short-lived
program. If it fails to terminate within a few seconds, it will be killed along with any
descendant processes.
--task-prolog=<executable>
The slurmstepd daemon will run executable just before launching each task. This will be executed
after any TaskProlog parameter in slurm.conf is executed. Besides the normal environment
variables, this has SLURM_TASK_PID available to identify the process ID of the task being started.
Standard output from this program of the form "export NAME=value" will be used to set environment
variables for the task being spawned.
--test-only
Returns an estimate of when a job would be scheduled to run given the current job queue and all
the other srun arguments specifying the job. This limits srun's behavior to just return
information; no job is actually submitted. EXCEPTION: On Bluegene/Q systems on when running
within an existing job allocation, this disables the use of "runjob" to launch tasks. The program
will be executed directly by the slurmd daemon.
--thread-spec=<num>
Count of specialized threads per node reserved by the job for system operations and not used by
the application. The application will not use these threads, but will be charged for their
allocation. This option can not be used with the --core-spec option.
--threads-per-core=<threads>
Restrict node selection to nodes with at least the specified number of threads per core. NOTE:
"Threads" refers to the number of processing units on each core rather than the number of
application tasks to be launched per core. See additional information under -B option above when
task/affinity plugin is enabled.
--time-min=<time>
Set a minimum time limit on the job allocation. If specified, the job may have it's --time limit
lowered to a value no lower than --time-min if doing so permits the job to begin execution earlier
than otherwise possible. The job's time limit will not be changed after the job is allocated
resources. This is performed by a backfill scheduling algorithm to allocate resources otherwise
reserved for higher priority jobs. Acceptable time formats include "minutes", "minutes:seconds",
"hours:minutes:seconds", "days-hours", "days-hours:minutes" and "days-hours:minutes:seconds".
--tmp=<MB>
Specify a minimum amount of temporary disk space.
-u, --unbuffered
By default the connection between slurmstepd and the user launched application is over a pipe. The
stdio output written by the application is buffered by the glibc until it is flushed or the output
is set as unbuffered. See setbuf(3). If this option is specified the tasks are executed with a
pseudo terminal so that the application output is unbuffered.
--usage
Display brief help message and exit.
--uid=<user>
Attempt to submit and/or run a job as user instead of the invoking user id. The invoking user's
credentials will be used to check access permissions for the target partition. User root may use
this option to run jobs as a normal user in a RootOnly partition for example. If run as root, srun
will drop its permissions to the uid specified after node allocation is successful. user may be
the user name or numerical user ID.
-V, --version
Display version information and exit.
-v, --verbose
Increase the verbosity of srun's informational messages. Multiple -v's will further increase
srun's verbosity. By default only errors will be displayed.
-W, --wait=<seconds>
Specify how long to wait after the first task terminates before terminating all remaining tasks. A
value of 0 indicates an unlimited wait (a warning will be issued after 60 seconds). The default
value is set by the WaitTime parameter in the slurm configuration file (see slurm.conf(5)). This
option can be useful to insure that a job is terminated in a timely fashion in the event that one
or more tasks terminate prematurely. Note: The -K, --kill-on-bad-exit option takes precedence
over -W, --wait to terminate the job immediately if a task exits with a non-zero exit code.
-w, --nodelist=<host1,host2,... or filename>
Request a specific list of hosts. The job will contain all of these hosts and possibly additional
hosts as needed to satisfy resource requirements. The list may be specified as a comma-separated
list of hosts, a range of hosts (host[1-5,7,...] for example), or a filename. The host list will
be assumed to be a filename if it contains a "/" character. If you specify a minimum node or
processor count larger than can be satisfied by the supplied host list, additional resources will
be allocated on other nodes as needed. Rather than repeating a host name multiple times, an
asterisk and a repetition count may be appended to a host name. For example "host1,host1" and
"host1*2" are equivalent.
--wckey=<wckey>
Specify wckey to be used with job. If TrackWCKey=no (default) in the slurm.conf this value is
ignored.
-X, --disable-status
Disable the display of task status when srun receives a single SIGINT (Ctrl-C). Instead
immediately forward the SIGINT to the running job. Without this option a second Ctrl-C in one
second is required to forcibly terminate the job and srun will immediately exit. May also be set
via the environment variable SLURM_DISABLE_STATUS.
-x, --exclude=<host1,host2,... or filename>
Request that a specific list of hosts not be included in the resources allocated to this job. The
host list will be assumed to be a filename if it contains a "/"character.
-Z, --no-allocate
Run the specified tasks on a set of nodes without creating a Slurm "job" in the Slurm queue
structure, bypassing the normal resource allocation step. The list of nodes must be specified
with the -w, --nodelist option. This is a privileged option only available for the users
"SlurmUser" and "root".
The following options support Blue Gene systems, but may be applicable to other systems as well.
--blrts-image=<path>
Path to blrts image for bluegene block. BGL only. Default from blugene.conf if not set.
--cnload-image=<path>
Path to compute node image for bluegene block. BGP only. Default from blugene.conf if not set.
--conn-type=<type>
Require the block connection type to be of a certain type. On Blue Gene the acceptable of type
are MESH, TORUS and NAV. If NAV, or if not set, then Slurm will try to fit a what the
DefaultConnType is set to in the bluegene.conf if that isn't set the default is TORUS. You should
not normally set this option. If running on a BGP system and wanting to run in HTC mode (only for
1 midplane and below). You can use HTC_S for SMP, HTC_D for Dual, HTC_V for virtual node mode,
and HTC_L for Linux mode. For systems that allow a different connection type per dimension you
can supply a comma separated list of connection types may be specified, one for each dimension
(i.e. M,T,T,T will give you a torus connection is all dimensions expect the first).
-g, --geometry=<XxYxZ> | <AxXxYxZ>
Specify the geometry requirements for the job. On BlueGene/L and BlueGene/P systems there are
three numbers giving dimensions in the X, Y and Z directions, while on BlueGene/Q systems there
are four numbers giving dimensions in the A, X, Y and Z directions and can not be used to allocate
sub-blocks. For example "--geometry=1x2x3x4", specifies a block of nodes having 1 x 2 x 3 x 4 =
24 nodes (actually midplanes on BlueGene).
--ioload-image=<path>
Path to io image for bluegene block. BGP only. Default from blugene.conf if not set.
--linux-image=<path>
Path to linux image for bluegene block. BGL only. Default from blugene.conf if not set.
--mloader-image=<path>
Path to mloader image for bluegene block. Default from blugene.conf if not set.
-R, --no-rotate
Disables rotation of the job's requested geometry in order to fit an appropriate block. By
default the specified geometry can rotate in three dimensions.
--ramdisk-image=<path>
Path to ramdisk image for bluegene block. BGL only. Default from blugene.conf if not set.
srun will submit the job request to the slurm job controller, then initiate all processes on the remote
nodes. If the request cannot be met immediately, srun will block until the resources are free to run the
job. If the -I (--immediate) option is specified srun will terminate if resources are not immediately
available.
When initiating remote processes srun will propagate the current working directory, unless --chdir=<path>
is specified, in which case path will become the working directory for the remote processes.
The -n, -c, and -N options control how CPUs and nodes will be allocated to the job. When specifying only
the number of processes to run with -n, a default of one CPU per process is allocated. By specifying the
number of CPUs required per task (-c), more than one CPU may be allocated per process. If the number of
nodes is specified with -N, srun will attempt to allocate at least the number of nodes specified.
Combinations of the above three options may be used to change how processes are distributed across nodes
and cpus. For instance, by specifying both the number of processes and number of nodes on which to run,
the number of processes per node is implied. However, if the number of CPUs per process is more important
then number of processes (-n) and the number of CPUs per process (-c) should be specified.
srun will refuse to allocate more than one process per CPU unless --overcommit (-O) is also specified.
srun will attempt to meet the above specifications "at a minimum." That is, if 16 nodes are requested for
32 processes, and some nodes do not have 2 CPUs, the allocation of nodes will be increased in order to
meet the demand for CPUs. In other words, a minimum of 16 nodes are being requested. However, if 16 nodes
are requested for 15 processes, srun will consider this an error, as 15 processes cannot run across 16
nodes.
IO Redirection
By default, stdout and stderr will be redirected from all tasks to the stdout and stderr of srun, and
stdin will be redirected from the standard input of srun to all remote tasks. If stdin is only to be
read by a subset of the spawned tasks, specifying a file to read from rather than forwarding stdin from
the srun command may be preferable as it avoids moving and storing data that will never be read.
For OS X, the poll() function does not support stdin, so input from a terminal is not possible.
For BGQ srun only supports stdin to 1 task running on the system. By default it is taskid 0 but can be
changed with the -i<taskid> as described below, or --launcher-opts="--stdinrank=<taskid>".
This behavior may be changed with the --output, --error, and --input (-o, -e, -i) options. Valid format
specifications for these options are
all stdout stderr is redirected from all tasks to srun. stdin is broadcast to all remote tasks.
(This is the default behavior)
none stdout and stderr is not received from any task. stdin is not sent to any task (stdin is
closed).
taskid stdout and/or stderr are redirected from only the task with relative id equal to taskid, where
0 <= taskid <= ntasks, where ntasks is the total number of tasks in the current job step.
stdin is redirected from the stdin of srun to this same task. This file will be written on the
node executing the task.
filename srun will redirect stdout and/or stderr to the named file from all tasks. stdin will be
redirected from the named file and broadcast to all tasks in the job. filename refers to a
path on the host that runs srun. Depending on the cluster's file system layout, this may
result in the output appearing in different places depending on whether the job is run in batch
mode.
format string
srun allows for a format string to be used to generate the named IO file described above. The
following list of format specifiers may be used in the format string to generate a filename
that will be unique to a given jobid, stepid, node, or task. In each case, the appropriate
number of files are opened and associated with the corresponding tasks. Note that any format
string containing %t, %n, and/or %N will be written on the node executing the task rather than
the node where srun executes, these format specifiers are not supported on a BGQ system.
%A Job array's master job allocation number.
%a Job array ID (index) number.
%J jobid.stepid of the running job. (e.g. "128.0")
%j jobid of the running job.
%s stepid of the running job.
%N short hostname. This will create a separate IO file per node.
%n Node identifier relative to current job (e.g. "0" is the first node of the running job)
This will create a separate IO file per node.
%t task identifier (rank) relative to current job. This will create a separate IO file per
task.
%u User name.
A number placed between the percent character and format specifier may be used to zero-pad the
result in the IO filename. This number is ignored if the format specifier corresponds to
non-numeric data (%N for example).
Some examples of how the format string may be used for a 4 task job step with a Job ID of 128
and step id of 0 are included below:
job%J.out job128.0.out
job%4j.out job0128.out
job%j-%2t.out job128-00.out, job128-01.out, ...
INPUT ENVIRONMENT VARIABLES
Some srun options may be set via environment variables. These environment variables, along with their
corresponding options, are listed below. Note: Command line options will always override these settings.
PMI_FANOUT This is used exclusively with PMI (MPICH2 and MVAPICH2) and controls the fanout of
data communications. The srun command sends messages to application programs (via
the PMI library) and those applications may be called upon to forward that data to
up to this number of additional tasks. Higher values offload work from the srun
command to the applications and likely increase the vulnerability to failures. The
default value is 32.
PMI_FANOUT_OFF_HOST This is used exclusively with PMI (MPICH2 and MVAPICH2) and controls the fanout of
data communications. The srun command sends messages to application programs (via
the PMI library) and those applications may be called upon to forward that data to
additional tasks. By default, srun sends one message per host and one task on that
host forwards the data to other tasks on that host up to PMI_FANOUT. If
PMI_FANOUT_OFF_HOST is defined, the user task may be required to forward the data
to tasks on other hosts. Setting PMI_FANOUT_OFF_HOST may increase performance.
Since more work is performed by the PMI library loaded by the user application,
failures also can be more common and more difficult to diagnose.
PMI_TIME This is used exclusively with PMI (MPICH2 and MVAPICH2) and controls how much the
communications from the tasks to the srun are spread out in time in order to avoid
overwhelming the srun command with work. The default value is 500 (microseconds)
per task. On relatively slow processors or systems with very large processor counts
(and large PMI data sets), higher values may be required.
SLURM_CONF The location of the Slurm configuration file.
SLURM_ACCOUNT Same as -A, --account
SLURM_ACCTG_FREQ Same as --acctg-freq
SLURM_BCAST Same as --bcast
SLURM_BLRTS_IMAGE Same as --blrts-image
SLURM_BURST_BUFFER Same as --bb
SLURM_CHECKPOINT Same as --checkpoint
SLURM_CHECKPOINT_DIR Same as --checkpoint-dir
SLURM_CNLOAD_IMAGE Same as --cnload-image
SLURM_CONN_TYPE Same as --conn-type
SLURM_CORE_SPEC Same as --core-spec
SLURM_CPU_BIND Same as --cpu_bind
SLURM_CPU_FREQ_REQ Same as --cpu-freq.
SLURM_CPUS_PER_TASK Same as -c, --cpus-per-task
SLURM_DEBUG Same as -v, --verbose
SlurmD_DEBUG Same as -d, --slurmd-debug
SLURM_DEPENDENCY -P, --dependency=<jobid>
SLURM_DISABLE_STATUS Same as -X, --disable-status
SLURM_DIST_PLANESIZE Same as -m plane
SLURM_DISTRIBUTION Same as -m, --distribution
SLURM_EPILOG Same as --epilog
SLURM_EXCLUSIVE Same as --exclusive
SLURM_EXIT_ERROR Specifies the exit code generated when a Slurm error occurs (e.g. invalid options).
This can be used by a script to distinguish application exit codes from various
Slurm error conditions. Also see SLURM_EXIT_IMMEDIATE.
SLURM_EXIT_IMMEDIATE Specifies the exit code generated when the --immediate option is used and resources
are not currently available. This can be used by a script to distinguish
application exit codes from various Slurm error conditions. Also see
SLURM_EXIT_ERROR.
SLURM_GEOMETRY Same as -g, --geometry
SLURM_HINT Same as --hint
SLURM_GRES Same as --gres. Also see SLURM_STEP_GRES
SLURM_IMMEDIATE Same as -I, --immediate
SLURM_IOLOAD_IMAGE Same as --ioload-image
SLURM_JOB_ID (and SLURM_JOBID for backwards compatibility)
Same as --jobid
SLURM_JOB_NAME Same as -J, --job-name except within an existing allocation, in which case it is
ignored to avoid using the batch job's name as the name of each job step.
SLURM_JOB_NUM_NODES (and SLURM_NNODES for backwards compatibility)
Total number of nodes in the job’s resource allocation.
SLURM_KILL_BAD_EXIT Same as -K, --kill-on-bad-exit
SLURM_LABELIO Same as -l, --label
SLURM_LINUX_IMAGE Same as --linux-image
SLURM_MEM_BIND Same as --mem_bind
SLURM_MEM_PER_CPU Same as --mem-per-cpu
SLURM_MEM_PER_NODE Same as --mem
SLURM_MLOADER_IMAGE Same as --mloader-image
SLURM_MPI_TYPE Same as --mpi
SLURM_NETWORK Same as --network
SLURM_NNODES Same as -N, --nodes
SLURM_NO_ROTATE Same as -R, --no-rotate
SLURM_NTASKS (and SLURM_NPROCS for backwards compatibility)
Same as -n, --ntasks
SLURM_NTASKS_PER_CORE Same as --ntasks-per-core
SLURM_NTASKS_PER_NODE Same as --ntasks-per-node
SLURM_NTASKS_PER_SOCKET
Same as --ntasks-per-socket
SLURM_OPEN_MODE Same as --open-mode
SLURM_OVERCOMMIT Same as -O, --overcommit
SLURM_PARTITION Same as -p, --partition
SLURM_PMI_KVS_NO_DUP_KEYS
If set, then PMI key-pairs will contain no duplicate keys. MPI can use this
variable to inform the PMI library that it will not use duplicate keys so PMI can
skip the check for duplicate keys. This is the case for MPICH2 and reduces
overhead in testing for duplicates for improved performance
SLURM_POWER Same as --power
SLURM_PROFILE Same as --profile
SLURM_PROLOG Same as --prolog
SLURM_QOS Same as --qos
SLURM_RAMDISK_IMAGE Same as --ramdisk-image
SLURM_REMOTE_CWD Same as -D, --chdir=
SLURM_REQ_SWITCH When a tree topology is used, this defines the maximum count of switches desired
for the job allocation and optionally the maximum time to wait for that number of
switches. See --switches
SLURM_RESERVATION Same as --reservation
SLURM_RESTART_DIR Same as --restart-dir
SLURM_RESV_PORTS Same as --resv-ports
SLURM_SICP Same as --sicp
SLURM_SIGNAL Same as --signal
SLURM_STDERRMODE Same as -e, --error
SLURM_STDINMODE Same as -i, --input
SLURM_SRUN_REDUCE_TASK_EXIT_MSG
if set and non-zero, successive task exit messages with the same exit code will be
printed only once.
SLURM_STEP_GRES Same as --gres (only applies to job steps, not to job allocations). Also see
SLURM_GRES
SLURM_STEP_KILLED_MSG_NODE_ID=ID
If set, only the specified node will log when the job or step are killed by a
signal.
SLURM_STDOUTMODE Same as -o, --output
SLURM_TASK_EPILOG Same as --task-epilog
SLURM_TASK_PROLOG Same as --task-prolog
SLURM_TEST_EXEC if defined, then verify existence of the executable program on the local computer
before attempting to launch it on compute nodes.
SLURM_THREAD_SPEC Same as --thread-spec
SLURM_THREADS Same as -T, --threads
SLURM_TIMELIMIT Same as -t, --time
SLURM_UNBUFFEREDIO Same as -u, --unbuffered
SLURM_WAIT Same as -W, --wait
SLURM_WAIT4SWITCH Max time waiting for requested switches. See --switches
SLURM_WCKEY Same as -W, --wckey
SLURM_WORKING_DIR -D, --chdir
OUTPUT ENVIRONMENT VARIABLES
srun will set some environment variables in the environment of the executing tasks on the remote compute
nodes. These environment variables are:
SLURM_CHECKPOINT_IMAGE_DIR
Directory into which checkpoint images should be written if specified on the
execute line.
SLURM_CLUSTER_NAME Name of the cluster on which the job is executing.
SLURM_CPU_BIND_VERBOSE
--cpu_bind verbosity (quiet,verbose).
SLURM_CPU_BIND_TYPE --cpu_bind type (none,rank,map_cpu:,mask_cpu:).
SLURM_CPU_BIND_LIST --cpu_bind map or mask list (list of Slurm CPU IDs or masks for this node, CPU_ID =
Board_ID x threads_per_board + Socket_ID x threads_per_socket + Core_ID x
threads_per_core + Thread_ID).
SLURM_CPU_FREQ_REQ Contains the value requested for cpu frequency on the srun command as a numerical
frequency in kilohertz, or a coded value for a request of low, medium,highm1 or
high for the frequency. See the description of the --cpu-freq option or the
SLURM_CPU_FREQ_REQ input environment variable.
SLURM_CPUS_ON_NODE Count of processors available to the job on this node. Note the select/linear
plugin allocates entire nodes to jobs, so the value indicates the total count of
CPUs on the node. For the select/cons_res plugin, this number indicates the number
of cores on this node allocated to the job.
SLURM_CPUS_PER_TASK Number of cpus requested per task. Only set if the --cpus-per-task option is
specified.
SLURM_DISTRIBUTION Distribution type for the allocated jobs. Set the distribution with -m,
--distribution.
SLURM_GTIDS Global task IDs running on this node. Zero origin and comma separated.
SLURM_JOB_CPUS_PER_NODE
Number of CPUS per node.
SLURM_JOB_DEPENDENCY Set to value of the --dependency option.
SLURM_JOB_ID (and SLURM_JOBID for backwards compatibility)
Job id of the executing job.
SLURM_JOB_NAME Set to the value of the --job-name option or the command name when srun is used to
create a new job allocation. Not set when srun is used only to create a job step
(i.e. within an existing job allocation).
SLURM_JOB_PARTITION Name of the partition in which the job is running.
SLURM_LAUNCH_NODE_IPADDR
IP address of the node from which the task launch was initiated (where the srun
command ran from).
SLURM_LOCALID Node local task ID for the process within a job.
SLURM_MEM_BIND_VERBOSE
--mem_bind verbosity (quiet,verbose).
SLURM_MEM_BIND_TYPE --mem_bind type (none,rank,map_mem:,mask_mem:).
SLURM_MEM_BIND_LIST --mem_bind map or mask list (<list of IDs or masks for this node>).
SLURM_NNODES Total number of nodes in the job's resource allocation.
SLURM_NODE_ALIASES Sets of node name, communication address and hostname for nodes allocated to the
job from the cloud. Each element in the set if colon separated and each set is
comma separated. For example: SLURM_NODE_ALIASES=ec0:1.2.3.4:foo,ec1:1.2.3.5:bar
SLURM_NODEID The relative node ID of the current node.
SLURM_NODELIST List of nodes allocated to the job.
SLURM_NTASKS (and SLURM_NPROCS for backwards compatibility)
Total number of processes in the current job.
SLURM_PRIO_PROCESS The scheduling priority (nice value) at the time of job submission. This value is
propagated to the spawned processes.
SLURM_PROCID The MPI rank (or relative process ID) of the current process.
SLURM_SRUN_COMM_HOST IP address of srun communication host.
SLURM_SRUN_COMM_PORT srun communication port.
SLURM_STEP_LAUNCHER_PORT
Step launcher port.
SLURM_STEP_NODELIST List of nodes allocated to the step.
SLURM_STEP_NUM_NODES Number of nodes allocated to the step.
SLURM_STEP_NUM_TASKS Number of processes in the step.
SLURM_STEP_TASKS_PER_NODE
Number of processes per node within the step.
SLURM_STEP_ID (and SLURM_STEPID for backwards compatibility)
The step ID of the current job.
SLURM_SUBMIT_DIR The directory from which srun was invoked.
SLURM_SUBMIT_HOST The hostname of the computer from which salloc was invoked.
SLURM_TASK_PID The process ID of the task being started.
SLURM_TASKS_PER_NODE Number of tasks to be initiated on each node. Values are comma separated and in the
same order as SLURM_NODELIST. If two or more consecutive nodes are to have the
same task count, that count is followed by "(x#)" where "#" is the repetition
count. For example, "SLURM_TASKS_PER_NODE=2(x3),1" indicates that the first three
nodes will each execute three tasks and the fourth node will execute one task.
SLURM_TOPOLOGY_ADDR This is set only if the system has the topology/tree plugin configured. The value
will be set to the names network switches which may be involved in the job's
communications from the system's top level switch down to the leaf switch and
ending with node name. A period is used to separate each hardware component name.
SLURM_TOPOLOGY_ADDR_PATTERN
This is set only if the system has the topology/tree plugin configured. The value
will be set component types listed in SLURM_TOPOLOGY_ADDR. Each component will be
identified as either "switch" or "node". A period is used to separate each
hardware component type.
SRUN_DEBUG Set to the logging level of the srun command. Default value is 3 (info level).
The value is incremented or decremented based upon the --verbose and --quiet
options.
MPIRUN_NOALLOCATE Do not allocate a block on Blue Gene systems only.
MPIRUN_NOFREE Do not free a block on Blue Gene systems only.
MPIRUN_PARTITION The block name on Blue Gene systems only.
SIGNALS AND ESCAPE SEQUENCES
Signals sent to the srun command are automatically forwarded to the tasks it is controlling with a few
exceptions. The escape sequence <control-c> will report the state of all tasks associated with the srun
command. If <control-c> is entered twice within one second, then the associated SIGINT signal will be
sent to all tasks and a termination sequence will be entered sending SIGCONT, SIGTERM, and SIGKILL to all
spawned tasks. If a third <control-c> is received, the srun program will be terminated without waiting
for remote tasks to exit or their I/O to complete.
The escape sequence <control-z> is presently ignored. Our intent is for this put the srun command into a
mode where various special actions may be invoked.
MPI SUPPORT
MPI use depends upon the type of MPI being used. There are three fundamentally different modes of
operation used by these various MPI implementation.
1. Slurm directly launches the tasks and performs initialization of communications (Quadrics MPI, MPICH2,
MPICH-GM, MVAPICH, MVAPICH2 and some MPICH1 modes). For example: "srun -n16 a.out".
2. Slurm creates a resource allocation for the job and then mpirun launches tasks using Slurm's
infrastructure (OpenMPI, LAM/MPI, HP-MPI and some MPICH1 modes).
3. Slurm creates a resource allocation for the job and then mpirun launches tasks using some mechanism
other than Slurm, such as SSH or RSH (BlueGene MPI and some MPICH1 modes). These tasks initiated outside
of Slurm's monitoring or control. Slurm's epilog should be configured to purge these tasks when the job's
allocation is relinquished.
See http://slurm.schedmd.com/mpi_guide.html for more information on use of these various MPI
implementation with Slurm.
MULTIPLE PROGRAM CONFIGURATION
Comments in the configuration file must have a "#" in column one. The configuration file contains the
following fields separated by white space:
Task rank
One or more task ranks to use this configuration. Multiple values may be comma separated. Ranges
may be indicated with two numbers separated with a '-' with the smaller number first (e.g. "0-4"
and not "4-0"). To indicate all tasks not otherwise specified, specify a rank of '*' as the last
line of the file. If an attempt is made to initiate a task for which no executable program is
defined, the following error message will be produced "No executable program specified for this
task".
Executable
The name of the program to execute. May be fully qualified pathname if desired.
Arguments
Program arguments. The expression "%t" will be replaced with the task's number. The expression
"%o" will be replaced with the task's offset within this range (e.g. a configured task rank value
of "1-5" would have offset values of "0-4"). Single quotes may be used to avoid having the
enclosed values interpreted. This field is optional. Any arguments for the program entered on
the command line will be added to the arguments specified in the configuration file.
For example:
###################################################################
# srun multiple program configuration file
#
# srun -n8 -l --multi-prog silly.conf
###################################################################
4-6 hostname
1,7 echo task:%t
0,2-3 echo offset:%o
> srun -n8 -l --multi-prog silly.conf
0: offset:0
1: task:1
2: offset:1
3: offset:2
4: linux15.llnl.gov
5: linux16.llnl.gov
6: linux17.llnl.gov
7: task:7
EXAMPLES
This simple example demonstrates the execution of the command hostname in eight tasks. At least eight
processors will be allocated to the job (the same as the task count) on however many nodes are required
to satisfy the request. The output of each task will be proceeded with its task number. (The machine
"dev" in the example below has a total of two CPUs per node)
> srun -n8 -l hostname
0: dev0
1: dev0
2: dev1
3: dev1
4: dev2
5: dev2
6: dev3
7: dev3
The srun -r option is used within a job script to run two job steps on disjoint nodes in the following
example. The script is run using allocate mode instead of as a batch job in this case.
> cat test.sh
#!/bin/sh
echo $SLURM_NODELIST
srun -lN2 -r2 hostname
srun -lN2 hostname
> salloc -N4 test.sh
dev[7-10]
0: dev9
1: dev10
0: dev7
1: dev8
The following script runs two job steps in parallel within an allocated set of nodes.
> cat test.sh
#!/bin/bash
srun -lN2 -n4 -r 2 sleep 60 &
srun -lN2 -r 0 sleep 60 &
sleep 1
squeue
squeue -s
wait
> salloc -N4 test.sh
JOBID PARTITION NAME USER ST TIME NODES NODELIST
65641 batch test.sh grondo R 0:01 4 dev[7-10]
STEPID PARTITION USER TIME NODELIST
65641.0 batch grondo 0:01 dev[7-8]
65641.1 batch grondo 0:01 dev[9-10]
This example demonstrates how one executes a simple MPICH job. We use srun to build a list of machines
(nodes) to be used by mpirun in its required format. A sample command line and the script to be executed
follow.
> cat test.sh
#!/bin/sh
MACHINEFILE="nodes.$SLURM_JOB_ID"
# Generate Machinefile for mpich such that hosts are in the same
# order as if run via srun
#
srun -l /bin/hostname | sort -n | awk '{print $2}' > $MACHINEFILE
# Run using generated Machine file:
mpirun -np $SLURM_NTASKS -machinefile $MACHINEFILE mpi-app
rm $MACHINEFILE
> salloc -N2 -n4 test.sh
This simple example demonstrates the execution of different jobs on different nodes in the same srun.
You can do this for any number of nodes or any number of jobs. The executables are placed on the nodes
sited by the SLURM_NODEID env var. Starting at 0 and going to the number specified on the srun
commandline.
> cat test.sh
case $SLURM_NODEID in
0) echo "I am running on "
hostname ;;
1) hostname
echo "is where I am running" ;;
esac
> srun -N2 test.sh
dev0
is where I am running
I am running on
dev1
This example demonstrates use of multi-core options to control layout of tasks. We request that four
sockets per node and two cores per socket be dedicated to the job.
> srun -N2 -B 4-4:2-2 a.out
This example shows a script in which Slurm is used to provide resource management for a job by executing
the various job steps as processors become available for their dedicated use.
> cat my.script
#!/bin/bash
srun --exclusive -n4 prog1 &
srun --exclusive -n3 prog2 &
srun --exclusive -n1 prog3 &
srun --exclusive -n1 prog4 &
wait
COPYING
Copyright (C) 2006-2007 The Regents of the University of California. Produced at Lawrence Livermore
National Laboratory (cf, DISCLAIMER).
Copyright (C) 2008-2010 Lawrence Livermore National Security.
Copyright (C) 2010-2015 SchedMD LLC.
This file is part of Slurm, a resource management program. For details, see <http://slurm.schedmd.com/>.
Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
SEE ALSO
salloc(1), sattach(1), sbatch(1), sbcast(1), scancel(1), scontrol(1), squeue(1), slurm.conf(5),
sched_setaffinity (2), numa (3) getrlimit (2)
January 2016 Slurm Commands srun(1)