Provided by: xfsprogs_4.3.0+nmu1ubuntu1.1_amd64 
NAME
xfs_quota - manage use of quota on XFS filesystems
SYNOPSIS
xfs_quota [ -x ] [ -p prog ] [ -c cmd ] ... [ -d project ] ... [ path ... ]
xfs_quota -V
DESCRIPTION
xfs_quota is a utility for reporting and editing various aspects of filesystem quota.
The options to xfs_quota are:
-c cmd xfs_quota commands may be run interactively (the default) or as arguments on the command line.
Multiple -c arguments may be given. The commands are run in the sequence given, then the
program exits.
-p prog Set the program name for prompts and some error messages, the default value is xfs_quota.
-x Enable expert mode. All of the administrative commands (see the ADMINISTRATOR COMMANDS section
below) which allow modifications to the quota system are available only in expert mode.
-d project
Project names or numeric identifiers may be specified with this option, which restricts the
output of the individual xfs_quota commands to the set of projects specified. Multiple -d
arguments may be given.
-V Prints the version number and exits.
The optional path argument(s) can be used to specify mount points or device files which identify XFS
filesystems. The output of the individual xfs_quota commands will then be restricted to the set of
filesystems specified.
This manual page is divided into two sections - firstly, information for users of filesystems with quota
enabled, and the xfs_quota commands of interest to such users; and then information which is useful only
to administrators of XFS filesystems using quota and the quota commands which allow modifications to the
quota system.
Note that common to almost all of the individual commands described below are the options for specifying
which quota types are of interest - user quota (-u), group quota (-g), and/or project quota (-p). Also,
several commands provide options to operate on "blocks used" (-b), "inodes used" (-i), and/or "realtime
blocks used" (-r).
Many commands also have extensive online help. Use the help command for more details on any command.
QUOTA OVERVIEW
In most computing environments, disk space is not infinite. The quota subsystem provides a mechanism to
control usage of disk space. Quotas can be set for each individual user on any/all of the local
filesystems. The quota subsystem warns users when they exceed their allotted limit, but allows some
extra space for current work (hard limit/soft limit). In addition, XFS filesystems with limit
enforcement turned off can be used as an effective disk usage accounting system.
Users' View of Disk Quotas
To most users, disk quotas are either of no concern or a fact of life that cannot be avoided. There are
two possible quotas that can be imposed - a limit can be set on the amount of space a user can occupy,
and there may be a limit on the number of files (inodes) he can own.
The quota command provides information on the quotas that have been set by the system administrators and
current usage.
There are four numbers for each limit: current usage, soft limit (quota), hard limit, and time limit.
The soft limit is the number of 1K-blocks (or files) that the user is expected to remain below. The hard
limit cannot be exceeded. If a user's usage reaches the hard limit, further requests for space (or
attempts to create a file) fail with the "Quota exceeded" (EDQUOT) error.
When a user exceeds the soft limit, the timer is enabled. Any time the quota drops below the soft
limits, the timer is disabled. If the timer pops, the particular limit that has been exceeded is treated
as if the hard limit has been reached, and no more resources are allocated to the user. The only way to
reset this condition, short of turning off limit enforcement or increasing the limit, is to reduce usage
below quota. Only the superuser (i.e. a sufficiently capable process) can set the time limits and this
is done on a per filesystem basis.
Surviving When the Quota Limit Is Reached
In most cases, the only way for a user to recover from over-quota conditions is to abort whatever
activity is in progress on the filesystem that has reached its limit, remove sufficient files to bring
the limit back below quota, and retry the failed program.
However, if a user is in the editor and a write fails because of an over quota situation, that is not a
suitable course of action. It is most likely that initially attempting to write the file has truncated
its previous contents, so if the editor is aborted without correctly writing the file, not only are the
recent changes lost, but possibly much, or even all, of the contents that previously existed.
There are several possible safe exits for a user caught in this situation. He can use the editor shell
escape command to examine his file space and remove surplus files. Alternatively, using sh(1), he can
suspend the editor, remove some files, then resume it. A third possibility is to write the file to some
other filesystem (perhaps to a file on /tmp) where the user's quota has not been exceeded. Then after
rectifying the quota situation, the file can be moved back to the filesystem it belongs on.
USER COMMANDS
print Lists all paths with devices/project identifiers. The path list can come from several places -
the command line, the mount table, and the /etc/projects file.
df See the free command.
quota [ -gpu ] [ -bir ] [ -hnNv ] [ -f file ] [ ID | name ] ...
Show individual usage and limits, for a single user name or numeric user ID. The -h option
reports in a "human-readable" format similar to the df(1) command. The -n option reports the
numeric IDs rather than the name. The -N option omits the header. The -v option outputs verbose
information. The -f option sends the output to file instead of stdout.
free [ -bir ] [ -hN ] [ -f file ]
Reports filesystem usage, much like the df(1) utility. It can show usage for blocks, inode,
and/or realtime block space, and shows used, free, and total available. If project quota are in
use (see the DIRECTORY TREE QUOTA section below), it will also report utilisation for those
projects (directory trees). The -h option reports in a "human-readable" format. The -N option
omits the header. The -f option outputs the report to file instead of stdout.
help [ command ]
Online help for all commands, or one specific command.
quit Exit xfs_quota.
q See the quit command.
QUOTA ADMINISTRATION
The XFS quota system differs to that of other filesystems in a number of ways. Most importantly, XFS
considers quota information as filesystem metadata and uses journaling to provide a higher level
guarantee of consistency. As such, it is administered differently, in particular:
1. The quotacheck command has no effect on XFS filesystems. The first time quota accounting is
turned on (at mount time), XFS does an automatic quotacheck internally; afterwards, the quota
system will always be completely consistent until quotas are manually turned off.
2. There is no need for quota file(s) in the root of the XFS filesystem.
3. XFS distinguishes between quota accounting and limit enforcement. Quota accounting must be turned
on at the time of mounting the XFS filesystem. However, it is possible to turn on/off limit
enforcement any time quota accounting is turned on. The "quota" option to the mount command turns
on both (user) quota accounting and enforcement. The "uqnoenforce" option must be used to turn on
user accounting with limit enforcement disabled.
4. Turning on quotas on the root filesystem is slightly different from the above. For IRIX XFS,
refer to quotaon(1M). For Linux XFS, the quota mount flags must be passed in with the
"rootflags=" boot parameter.
5. It is useful to use the state to monitor the XFS quota subsystem at various stages - it can be
used to see if quotas are turned on, and also to monitor the space occupied by the quota system
itself..
6. There is a mechanism built into xfsdump that allows quota limit information to be backed up for
later restoration, should the need arise.
7. Quota limits cannot be set before turning on quotas on.
8. XFS filesystems keep quota accounting on the superuser (user ID zero), and the tool will display
the superuser's usage information. However, limits are never enforced on the superuser (nor are
they enforced for group and project ID zero).
9. XFS filesystems perform quota accounting whether the user has quota limits or not.
10. XFS supports the notion of project quota, which can be used to implement a form of directory tree
quota (i.e. to restrict a directory tree to only being able to use up a component of the
filesystems available space; or simply to keep track of the amount of space used, or number of
inodes, within the tree).
ADMINISTRATOR COMMANDS
path [ N ]
Lists all paths with devices/project identifiers or set the current path to the Nth list entry
(the current path is used by many of the commands described here, it identifies the filesystem
toward which a command is directed). The path list can come from several places - the command
line, the mount table, and the /etc/projects file.
report [ -gpu ] [ -bir ] [ -ahntLNU ] [ -f file ]
Report filesystem quota information. This reports all quota usage for a filesystem, for the
specified quota type (u/g/p and/or blocks/inodes/realtime). It reports blocks in 1KB units by
default. The -h option reports in a "human-readable" format similar to the df(1) command. The -f
option outputs the report to file instead of stdout. The -a option reports on all filesystems. The
-n option outputs the numeric ID instead of the name. The -L and -U options specify lower and
upper ID bounds to report on. The -N option reports information without the header line. The -t
option performs a terse report.
state [ -gpu ] [ -av ] [ -f file ]
Report overall quota state information. This reports on the state of quota accounting, quota
enforcement, and the number of extents being used by quota metadata within the filesystem. The -f
option outputs state information to file instead of stdout. The -a option reports state on all
filesystems and not just the current path.
limit [ -gpu ] bsoft=N | bhard=N | isoft=N | ihard=N | rtbsoft=N | rtbhard=N -d | id | name
Set quota block limits (bhard/bsoft), inode count limits (ihard/isoft) and/or realtime block
limits (rtbhard/rtbsoft). The -d option (defaults) can be used to set the default value that will
be used, otherwise a specific user/group/project name or numeric identifier must be specified.
timer [ -gpu ] [ -bir ] value
Allows the quota enforcement timeout (i.e. the amount of time allowed to pass before the soft
limits are enforced as the hard limits) to be modified. The current timeout setting can be
displayed using the state command. The value argument is a number of seconds, but units of
'minutes', 'hours', 'days', and 'weeks' are also understood (as are their abbreviations 'm', 'h',
'd', and 'w').
warn [ -gpu ] [ -bir ] value -d | id | name
Allows the quota warnings limit (i.e. the number of times a warning will be send to someone over
quota) to be viewed and modified. The -d option (defaults) can be used to set the default time
that will be used, otherwise a specific user/group/project name or numeric identifier must be
specified. NOTE: this feature is not currently implemented.
enable [ -gpu ] [ -v ]
Switches on quota enforcement for the filesystem identified by the current path. This requires
the filesystem to have been mounted with quota enabled, and for accounting to be currently active.
The -v option (verbose) displays the state after the operation has completed.
disable [ -gpu ] [ -v ]
Disables quota enforcement, while leaving quota accounting active. The -v option (verbose)
displays the state after the operation has completed.
off [ -gpu ] [ -v ]
Permanently switches quota off for the filesystem identified by the current path. Quota can only
be switched back on subsequently by unmounting and then mounting again.
remove [ -gpu ] [ -v ]
Remove any space allocated to quota metadata from the filesystem identified by the current path.
Quota must not be enabled on the filesystem, else this operation will report an error.
dump [ -gpu ] [ -f file ]
Dump out quota limit information for backup utilities, either to standard output (default) or to a
file. This is only the limits, not the usage information, of course.
restore [ -gpu ] [ -f file ]
Restore quota limits from a backup file. The file must be in the format produced by the dump
command.
quot [ -gpu ] [ -bir ] [ -acnv ] [ -f file ]
Summarize filesystem ownership, by user, group or project. This command uses a special XFS
"bulkstat" interface to quickly scan an entire filesystem and report usage information. This
command can be used even when filesystem quota are not enabled, as it is a full-filesystem scan
(it may also take a long time...). The -a option displays information on all filesystems. The -c
option displays a histogram instead of a report. The -n option displays numeric IDs rather than
names. The -v option displays verbose information. The -f option send the output to file instead
of stdout.
project [ -cCs [ -d depth ] [ -p path ] id | name ]
The -c, -C, and -s options allow the directory tree quota mechanism to be maintained. -d allows
to limit recursion level when processing project directories and -p allows to specify project
paths at command line ( instead of /etc/projects ). All options are discussed in detail below.
DIRECTORY TREE QUOTA
The project quota mechanism in XFS can be used to implement a form of directory tree quota, where a
specified directory and all of the files and subdirectories below it (i.e. a tree) can be restricted to
using a subset of the available space in the filesystem.
A managed tree must be setup initially using the -s option to the project command. The specified project
name or identifier is matched to one or more trees defined in /etc/projects, and these trees are then
recursively descended to mark the affected inodes as being part of that tree. This process sets an inode
flag and the project identifier on every file in the affected tree. Once this has been done, new files
created in the tree will automatically be accounted to the tree based on their project identifier. An
attempt to create a hard link to a file in the tree will only succeed if the project identifier matches
the project identifier for the tree. The xfs_io utility can be used to set the project ID for an
arbitrary file, but this can only be done by a privileged user.
A previously setup tree can be cleared from project quota control through use of the project -C option,
which will recursively descend the tree, clearing the affected inodes from project quota control.
Finally, the project -c option can be used to check whether a tree is setup, it reports nothing if the
tree is correct, otherwise it reports the paths of inodes which do not have the project ID of the rest of
the tree, or if the inode flag is not set.
Option -d can be used to limit recursion level (-1 is infinite, 0 is top level only, 1 is first level ...
). Option -p adds possibility to specify project paths in command line without a need for /etc/projects
to exist. Note that if projects file exists then it is also used.
EXAMPLES
Enabling quota enforcement on an XFS filesystem (restrict a user to a set amount of space).
# mount -o uquota /dev/xvm/home /home
# xfs_quota -x -c 'limit bsoft=500m bhard=550m tanya' /home
# xfs_quota -x -c report /home
Enabling project quota on an XFS filesystem (restrict files in log file directories to only using 1
gigabyte of space).
# mount -o prjquota /dev/xvm/var /var
# echo 42:/var/log >> /etc/projects
# echo logfiles:42 >> /etc/projid
# xfs_quota -x -c 'project -s logfiles' /var
# xfs_quota -x -c 'limit -p bhard=1g logfiles' /var
Same as above without a need for configuration files.
# rm -f /etc/projects /etc/projid
# mount -o prjquota /dev/xvm/var /var
# xfs_quota -x -c 'project -s -p /var/log 42' /var
# xfs_quota -x -c 'limit -p bhard=1g 42' /var
CAVEATS
XFS implements delayed allocation (aka. allocate-on-flush) and this has implications for the quota
subsystem. Since quota accounting can only be done when blocks are actually allocated, it is possible to
issue (buffered) writes into a file and not see the usage immediately updated. Only when the data is
actually written out, either via one of the kernels flushing mechanisms, or via a manual sync(2), will
the usage reported reflect what has actually been written.
In addition, the XFS allocation mechanism will always reserve the maximum amount of space required before
proceeding with an allocation. If insufficient space for this reservation is available, due to the block
quota limit being reached for example, this may result in the allocation failing even though there is
sufficient space. Quota enforcement can thus sometimes happen in situations where the user is under
quota and the end result of some operation would still have left the user under quota had the operation
been allowed to run its course. This additional overhead is typically in the range of tens of blocks.
Both of these properties are unavoidable side effects of the way XFS operates, so should be kept in mind
when assigning block limits.
BUGS
Quota support for filesystems with realtime subvolumes is not yet implemented, nor is the quota warning
mechanism (the Linux warnquota(8) tool can be used to provide similar functionality on that platform).
FILES
/etc/projects Mapping of numeric project identifiers to directories trees.
/etc/projid Mapping of numeric project identifiers to project names.
IRIX SEE ALSO
quotaon(1M), xfs(4).
LINUX SEE ALSO
warnquota(8), xfs(5).
SEE ALSO
df(1), mount(1), sync(2), projid(5), projects(5).
xfs_quota(8)