Provided by: lvm2_2.03.11-2.1ubuntu4_amd64 bug

NAME

       lvm fullreport - Display full report

SYNOPSIS

       lvm fullreport
           [ option_args ]
           [ position_args ]

DESCRIPTION

       lvm fullreport produces formatted output about PVs, PV segments, VGs, LVs and LV segments.
       The information is all gathered together for each VG  (under  a  per-VG  lock)  so  it  is
       consistent.  Information  gathered  from  separate  calls  to  vgs,  pvs,  and  lvs can be
       inconsistent if information changes between commands.

USAGE

       lvm fullreport
           [ -a|--all ]
           [ -o|--options String ]
           [ -S|--select String ]
           [ -O|--sort String ]
           [    --aligned ]
           [    --binary ]
           [    --configreport log|vg|lv|pv|pvseg|seg ]
           [    --foreign ]
           [    --ignorelockingfailure ]
           [    --logonly ]
           [    --nameprefixes ]
           [    --noheadings ]
           [    --nosuffix ]
           [    --readonly ]
           [    --reportformat basic|json ]
           [    --rows ]
           [    --separator String ]
           [    --shared ]
           [    --unbuffered ]
           [    --units r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E ]
           [    --unquoted ]
           [ COMMON_OPTIONS ]
           [ VG ... ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --aligned
              Use with --separator to align the output columns

       -a|--all

       --binary
              Use binary values "0" or "1" instead of descriptive literal values for columns that
              have exactly two valid values to report (not counting the "unknown" value which
              denotes that the value could not be determined).

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       --configreport log|vg|lv|pv|pvseg|seg
              See lvmreport(7).

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       --foreign
              Report/display foreign VGs that would otherwise be skipped.  See lvmsystemid(7) for
              more information about foreign VGs.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue with read-only metadata operations after locking
              failures.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more
              information.

       --logonly
              Suppress command report and display only log report.

       --longhelp
              Display long help text.

       --nameprefixes
              Add an "LVM2_" prefix plus the field name to the output. Useful with --noheadings
              to produce a list of field=value pairs that can be used to set environment
              variables (for example, in udev rules).

       --noheadings
              Suppress the headings line that is normally the first line of output.  Useful if
              grepping the output.

       --nolocking
              Disable locking.

       --nosuffix
              Suppress the suffix on output sizes. Use with --units (except h and H) if
              processing the output.

       -o|--options String
              Comma-separated, ordered list of fields to display in columns.  String arg syntax
              is: [+|-|#]Field1[,Field2 ...]  The prefix + will append the specified fields to
              the default fields, - will remove the specified fields from the default fields, and
              # will compact specified fields (removing them when empty for all rows.)  Use -o
              help to view the list of all available fields.  Use separate lists of fields to
              add, remove or compact by repeating the -o option: -o+field1,field2 -o-
              field3,field4 -o#field5.  These lists are evaluated from left to right.  Use field
              name lv_all to view all LV fields, vg_all all VG fields, pv_all all PV fields,
              pvseg_all all PV segment fields, seg_all all LV segment fields, and pvseg_all all
              PV segment columns.  See the lvm.conf report section for more config options.  See
              lvmreport(7) for more information about reporting.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --readonly
              Run the command in a special read-only mode which will read on-disk metadata
              without needing to take any locks. This can be used to peek inside metadata used by
              a virtual machine image while the virtual machine is running. No attempt will be
              made to communicate with the device-mapper kernel driver, so this option is unable
              to report whether or not LVs are actually in use.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the
              report/output_format setting in lvm.conf.  basic is the original format with
              columns and rows.  If there is more than one report per command, each report is
              prefixed with the report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       --rows
              Output columns as rows.

       -S|--select String
              Select objects for processing and reporting based on specified criteria.  The
              criteria syntax is described by --select help and lvmreport(7).  For reporting
              commands, one row is displayed for each object matching the criteria.  See
              --options help for selectable object fields.  Rows can be displayed with an
              additional "selected" field (-o selected) showing 1 if the row matches the
              selection and 0 otherwise.  For non-reporting commands which process LVM entities,
              the selection is used to choose items to process.

       --separator String
              String to use to separate each column. Useful if grepping the output.

       --shared
              Report/display shared VGs that would otherwise be skipped when lvmlockd is not
              being used on the host.  See lvmlockd(8) for more information about shared VGs.

       -O|--sort String
              Comma-separated ordered list of columns to sort by. Replaces the default selection.
              Precede any column with - for a reverse sort on that column.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       --unbuffered
              Produce output immediately without sorting or aligning the columns properly.

       --units r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
              All sizes are output in these units: human-(r)eadable with '<' rounding indicator,
              (h)uman-readable, (b)ytes, (s)ectors, (k)ilobytes, (m)egabytes, (g)igabytes,
              (t)erabytes, (p)etabytes, (e)xabytes.  Capitalise to use multiples of 1000 (S.I.)
              instead of 1024.  Custom units can be specified, e.g. --units 3M.

       --unquoted
              When used with --nameprefixes, output values in the field=value pairs are not
              quoted.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG
              Volume Group name.  See lvm(8) for valid names.

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional  unit.   Input  units  are  always
              treated  as  base  two  values, regardless of capitalization, e.g. 'k' and 'K' both
              refer to 1024.  The default input unit is specified by letter, followed  by  |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is
              sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P  is  PiB,
              e|E  is  EiB.   (This should not be confused with the output control --units, where
              capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for  information  about  environment  variables  used  by  lvm.   For  example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8) pvresize(8) pvs(8)
       pvscan(8)

       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)  vgconvert(8)  vgdisplay(8)
       vgexport(8)  vgextend(8)  vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)
       vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8) lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvreduce(8)  lvremove(8)
       lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)