Provided by: lvm2_2.03.11-2.1ubuntu4_amd64 bug

NAME

       vgck - Check the consistency of volume group(s)

SYNOPSIS

       vgck option_args position_args
           [ option_args ]
           [ position_args ]

DESCRIPTION

       vgck checks LVM metadata for consistency.

USAGE

       Read and display information about a VG.

       vgck
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
           [ VG|Tag ... ]

       Rewrite VG metadata to correct problems.

       vgck --updatemetadata VG
           [ COMMON_OPTIONS ]

       Common options for command:

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more
              information about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
              to the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and
              debugging.

       -h|--help
              Display help text.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more
              information.

       --longhelp
              Display long help text.

       --nolocking
              Disable locking.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the
              report/output_format setting in lvm.conf.  basic is the original format with
              columns and rows.  If there is more than one report per command, each report is
              prefixed with the report name for identification. json produces report output in
              JSON format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by
              disabling all metadata writing but nevertheless returning success to the calling
              function. This may lead to unusual error messages in multi-stage operations if a
              tool relies on reading back metadata it believes has changed but hasn't.

       --updatemetadata
              Update VG metadata to correct problems.  If VG metadata was updated while a PV was
              missing, and the PV reappears with an old version of metadata, then this option (or
              any other command that writes metadata) will update the metadata on the previously
              missing PV. If a PV was removed from a VG while it was missing, and the PV
              reappears, using this option will clear the outdated metadata from the previously
              missing PV. If metadata text is damaged on one PV, using this option will replace
              the damaged metadata text. For more severe damage, e.g. with headers, see pvck(8).

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
              to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES

       VG
              Volume Group name.  See lvm(8) for valid names.

       Tag
              Tag  name.  See lvm(8) for information about tag names and using tags in place of a
              VG, LV or PV.

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional  unit.   Input  units  are  always
              treated  as  base  two  values, regardless of capitalization, e.g. 'k' and 'K' both
              refer to 1024.  The default input unit is specified by letter, followed  by  |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is
              sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P  is  PiB,
              e|E  is  EiB.   (This should not be confused with the output control --units, where
              capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES

       See lvm(8) for  information  about  environment  variables  used  by  lvm.   For  example,
       LVM_VG_NAME can generally be substituted for a required VG parameter.

SEE ALSO

       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8) pvresize(8) pvs(8)
       pvscan(8)

       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)  vgconvert(8)  vgdisplay(8)
       vgexport(8)  vgextend(8)  vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)
       vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8) lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8)  lvreduce(8)  lvremove(8)
       lvrename(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)