Provided by: mjpegtools_2.1.0+debian-8.1build1_amd64 bug

NAME

       mp2enc - Simple MPEG-1 layer-II audio encoder

SYNOPSIS

       mp2enc  [-v num] [-b bitrate_kbps] [-r output_sampling_rate_hz] [-R rate,chans,bits] [-s ]
       [-m ] [-e ] [-V ] [-?]  -o output_filename

DESCRIPTION

       Mp2enc is a simple MPEG-1 layer-I/II audio encoder.  It is actually a very  mildly  warmed
       over  version of the MPEG Software Simulation Group's reference encoder.  It accepts a WAV
       file or stream on stdin and ouputs  an  a  layer-I/II  elementary  audio  stream.   It  is
       included in the mjpegtools(1) primarily for reasons of completeness and because it is able
       to perform sampling rate conversion.

       Those seeking a faster (and probably higher quality) layer II encoder are  recommended  to
       use toolame(1) which can be obtained from:

              http://www.planckenergy.com

GENERAL FUNCTION LETTERS

       -o output_filename
              Specifies the name for the output file.

              An  integer  format  code  (e.g. %d) in the name is replaced the number of the file
              generated (see printf(3)).

       -v num Set verbosity level to num.  0 = warnings and errors only, 1 = information as well,
              2=really verbose.  -?  Display a synopsis of the command syntax.

       -R rate,chans,bits
              Indicate,  that  the  input  is raw PCM without header. You must specify 3 numbers:
              rate is the samplerate in Hz, chans is the number of channels (1 or 2) and bits  is
              the  number  of bits per sample. 8 bits are unsigned, 16 bits are signed in machine
              native byte order.

FUNCTION LETTERS CONTROLLING OUTPUT STREAM STRUCTURE

       -b bitrate

              This sets the bit-rate of the output stream in kBit/sec.  Typical values for  layer
              II  might  be 224kbps for good-quality audio suitable for capturing Dolby pro-logic
              signals.  A rate of 192kbps or 128kbps is reasonable for low  quality  audio  (e.g.
              mono  TV  audio).   Really  high  compression  is, of course, better achieved using
              MPEG-1 layer III ("MP3") audio encoding or AAC. A more appropriate value for  layer
              I might be 384kbps.

       -r sampling_rate
              Sets  the  audio  sampling  rate  of  the reconstructed output signal in Hz.  Legal
              values are 32000,  44100  and  48000Hz.    mp2enc  will  automatically  sample-rate
              convert the input signal if necessary.

       -l layer
              Sets the audio layer.  Legal values are 1 and 2. The default is layer II.

       -s     Force  stereo  output.   A  mono input signal is channel doubled before encoding to
              make it stereo.  This is useful for players which simply can't handle  a  non-stero
              signal.

       -m     Force mono output.  A stereo input signal is down-mixed before encoding.  Useful if
              you've captured a mono signal in stereo and your  player  can  handle  mono  MPEG-1
              Layer 2 audio.

       -e     Use CRC error protection.

       -V     Force VCD compatible output. The primary effect of this is to make certain that the
              sampling rate is set to 44100 (-r 44100).  The VCD2.0  specifications  permit  mono
              audio  at  64, 96 and 192 kbits/sec and stereo at 128, 192, 224, and 384 kbits/sec.
              Using -V checks that the bitrate is valid for the number of channels.  The defaults
              (unless -m or -b are used) are stereo at 224 kbits/sec.

       -o outputpathname
              The name of the output file to generate.  If '-' is given as the pathname output is
              written to standard output.

BUGS

       Mono output does not work for layer I.

AUTHOR

       This man page was written by Andrew Stevens.
       If you have questions, remarks, problems or you just want to contact the  developers,  the
       main mailing list for the MJPEG-tools is:
         mjpeg-users@lists.sourceforge.net

       For more info, see our website at
              http://mjpeg.sourceforge.net

SEE ALSO

       mpeg2enc(1), mp2enc(1), lavrec(1), lavplay(1), lav2yuv(1), lav2wav(1), yuvscaler(1)