Provided by: dacs_1.4.38a-2build1_amd64 bug

NAME

       dacs.conf - DACS configuration files and directives

DESCRIPTION

       These files are part of the DACS suite.

       Nearly all DACS services and utilities consult a configuration file when they start up.
       Such things as the per-jurisdiction locations of access control files and log files,
       authentication processing, error handling, and run-time limits are specified in the
       configuration file. The recommended name for this file is dacs.conf and the DACS
       documentation will generally refer to it by that name. Site-wide configuration, which is
       optional, is typically put in a file named site.conf. Both files are XML documents, and
       consist of various sections, clauses, and directives, not unlike the httpd.conf
       configuration file used by Apache. Different federations and jurisdictions running on the
       same host may share these files or each might have its own separate configuration file;
       the former is more common since it reduces duplication and helps to prevent
       inconsistencies.

       Federations, jurisdictions, and other important concepts are discussed in dacs(1)[1].

           Note
           Unlike the "passive" configuration files found in most systems, the DACS configuration
           files are "active"; that is, configuration directives are evaluated as expressions
           within a run-time context that includes information related to the current request,
           web server, operating system, and DACS itself. By specifying the value of a directive
           as an expression rather than a simple string, the configuration under which a request
           is processed can adapt to, or depend on, the context in which it is made.
           Administrators do not need to use this capability, but it is available when
           flexibility is needed.

           Note
           Each configuration file is completely read and processed once, each time a DACS web
           service or utility is executed. Changes to the files take effect the next time the
           files are read; no recompilation or special action needs to be taken, and neither
           Apache nor any other server needs to be restarted. It is usually safe to make minor
           updates to the configuration files while DACS is operational, but it is better to
           temporarily deny all access if the web server is busy and more complicated changes are
           being made. Because DACS components abort if they encounter a configuration error
           (e.g., leading to all access to be denied, all authentication to fail, or a utility to
           become non-operational), temporarily introducing a configuration error will not
           usually cause any serious problems. Under heavy load or if complex authentication
           methods have been configured, however, it is prudent to stop the web server briefly
           while the old configuration files are replaced with the new ones.

           Tip
           While it may at first seem that DACS is difficult to configure, in practice the
           default configuration that comes with the DACS distribution is sufficient in many
           cases, and leaves only a few straightforward, site-dependent directives to be
           specified. Many administrators will never need to use the more advanced configuration
           features.

           Tip
           •   The DACS distribution includes a prototype version of site.conf, found in
               conf/site.conf-std, which establishes reasonable defaults based on DACS build-time
               arguments. It may need some customization for the local environment. By default,
               DACS looks for the site configuration file in federations/site.conf, relative to
               the DACS installation directory; conf/site.conf-std can be copied there and any
               necessary customizations made.

           •   A command to validate and display configuration, dacsconf(1)[2] is available, as
               is a simple web service, dacs_conf(8)[3]. Until you become comfortable with
               configuration files, consider running one of them after making changes. A fatal
               configuration error will prevent DACS from running and access to all DACS-wrapped
               resources will be denied.

   Locating dacs.conf and site.conf
       The locations of dacs.conf and site.conf may be specified with the web server
       configuration, in an environment variable, through a command line flag, or at compile
       time. A single configuration file can provide directives for multiple DACS jurisdictions.
       For example, if a machine is hosting more than one DACS jurisdiction, they can each use
       the same DACS binaries.

           Note
           Most DACS commands and web services require the dacs.conf file to exist; the
           exceptions are a few "standalone" programs, such as dacshttp(1)[4]. The site.conf file
           is not required; if a location has been configured and the file exists, however, it
           must be readable and by convention should contain default values appropriate for the
           installed release.

       Command line flags common to many DACS programs are described in dacs(1)[5].

       So that dacs_acs(8)[6] (which is invoked by the mod_auth_dacs[7] module) can find its
       configuration, the location of dacs.conf can be specified in Apache's httpd.conf file
       using the SetDACSAuthConf directive. It may instead, however, be specified through the
       DACS_CONF environment variable, on the command line, or using a build-time default.
       Similarly, the location of site.conf can be specified in Apache's httpd.conf file using
       the SetDACSAuthSiteConf directive, through the DACS_SITE_CONF environment variable, on the
       command line, or using a build-time default.

       If the location of dacs.conf (site.conf) is not given at run-time, a compile-time value of
       the symbol DACS_CONF (DACS_SITE_CONF) will be used if possible. This is the usual case for
       programs other than dacs_acs. It is a fatal error if a DACS service can't locate
       dacs.conf.

       Regardless of how the location of dacs.conf is specified, DACS performs string
       interpolation on the pathname. If interpolation fails, DACS will encounter a fatal error
       because it will not be able to locate its configuration file.

       Path Interpolation
           Path interpolation is available using a syntax and method similar to Apache's
           mod_vhost_alias[8] module. Interpolation is always performed to determine the
           locations of several resources used by DACS, such as dacs.conf and site.conf, and with
           DACS's LOG_FILE[9] directive, regardless of the manner in which the location is
           provided to DACS. It is applied whether the location of dacs.conf is specified using
           the -u command line flag or the Apache (mod_auth_dacs) SetDACSAuthConf directive, for
           instance.

           The functionality can also be accessed using the pathname()[10] function.

           The strings that may be interpolated into the pathname are obtained from the execution
           environment, in particular the URI authority information (based on Apache's
           SERVER_NAME and SERVER_PORT environment variables), the URI service path (described
           below), build-time configuration, and the applicable Jurisdiction section's
           distinguishing URI.

           Interpolation is controlled by printf-like format specifiers, as follows:

           %%
               Insert a literal percent character

           %a
               Insert the application name, which is obtained from the filename component of the
               program's argv[0] argument

           %bA
               Insert the absolute pathname of the root of the Apache installation directory,
               specified at build-time (APACHE_HOME)

           %bD
               Insert the absolute pathname of the root of the DACS installation directory,
               specified at build-time (DACS_HOME)

           %p
               Insert the port number of the virtual host (SERVER_PORT)

           %N.M
               Insert one or more components of the name, or a substring of those subcomponents.
               N and M are numbers used to select part of the SERVER_NAME string (a domain name
               or IP address).  N selects from the dot-separated components of SERVER_NAME, while
               M selects characters within whatever N has selected.  M is optional and defaults
               to zero if it isn't present. The dot must be present if and only if M is also
               present. If N or M are greater than the number of parts available, a single
               underscore is interpolated. The numbers are interpreted as follows:

               0 or 1+ or -1+
                   the whole name

               1
                   the first part

               2
                   the second name

               -1
                   the last part

               -2
                   the next-to-last part

               2+
                   the second and all following parts

               -2+
                   the next-to-last and all preceding parts

           %s[N.M]
               This is a synonym for %N.M, with %s being equivalent to %0.

                   Note
                   In cases where the character following %s should not be interpreted as part of
                   the format, it must be escaped (e.g., %s%2).

           %u[N.M]
               This functions like the %s specifier except that it is applied to the URI service
               path (described below) for the current request, which has slash-separated
               components.  %u is equivalent to %u0. For example, if the URI service path is
               "example.com/metalogic", %u1 would be "example.com", %u2 would be "metalogic", and
               %u0 (and %u and %u1+) would be "example.com/metalogic".

                   Note
                   In cases where the character following %u should be interpolated verbatim and
                   not interpreted as part of the specifier, it must be escaped (e.g., %u%2).

           %U[N.M]
               This functions like the %u specifier except that it is applied to the applicable
               Jurisdiction section's[11] distinguishing URI (described below).  %U is equivalent
               to %U0.

                   Note
                   •   Because the applicable Jurisdiction section is not known until after
                       configuration processing has started, this specifier cannot be used to
                       describe the location of configuration files.

                   •   In cases where the character following %U should be interpolated verbatim
                       and not interpreted as part of the specifier, it must be escaped (e.g.,
                       %U%2).

           Other format specifiers
               If a % is followed by an unrecognized specifier, that character is inserted
               verbatim.

           Other characters
               All other characters are inserted verbatim

           For example, if SERVER_NAME is dss.example.com and SERVER_PORT is 8080, then the
           Apache directive:

               SetDACSAuthConf dacs-acs "/usr/local/apache2/conf/dacs/%2+/dacs.conf"

           will expand the path to /usr/local/apache2/conf/dacs/example.com/dacs.conf. The
           command line flag:

               -c /usr/local/dacs/%1%.%p/dacs.conf

           specifies the location of the configuration file to be
           /usr/local/dacs/dss.8080/dacs.conf.

           The %u specifier interpolates the URI service path, or portions thereof, which is the
           string HTTP_HOST/REQUEST_URI (without a query component). When a DACS service is
           invoked as a CGI, this will be the usual case; the URI service path is undefined if
           either of those environment variables is unavailable, however.

   File Format
       dacs.conf is an XML document that conforms to Configuration.dtd[12].

       A dacs.conf file consists of an optional Default section followed by zero or more
       Jurisdiction sections. Either type of section consists of DACS directives or XML elements,
       called clauses, that contain DACS directives. There are three kinds of clauses: Auth
       clauses, Roles clauses, and Transfer clauses.

       Just to give its flavour, here's an incomplete dacs.conf file:

           <Configuration>
             <Default>
               LOG_FILE "${Conf::DACS_HOME}/logs/logfile"
               FEDERATION_DOMAIN "example.com"
               FEDERATION_NAME "ROOT"
               LOG_LEVEL "notice"
               SSL_PROG "/usr/local/dacs/bin/sslclient"
             </Default>

             <!-- Configuration of first jurisdiction -->
             <Jurisdiction uri="dss.example.com">
               JURISDICTION_NAME "DSS"
               <Auth id="auth_name">
                 URL "https://dss.example.com/cgi-bin/dacs/local_unix_authenticate"
                 STYLE "pass"
                 CONTROL "sufficient"
               </Auth>
              </Jurisdiction>

             <!-- Configuration of second jurisdiction -->
              <Jurisdiction uri="dss.example.com/foo">
                JURISDICTION_NAME "FOO"
              </Jurisdiction>

             <!-- Configuration of third jurisdiction -->
              <Jurisdiction uri="metalogic.example.com">
                JURISDICTION_NAME "METALOGIC"
              </Jurisdiction>
            </Configuration>

       The structure of site.conf is only slightly different. The Default section is mandatory in
       site.conf and no Jurisdiction sections are allowed.

           Note
           Because the configuration files are XML documents, characters special to XML must be
           properly escaped. In particular, an ampersand character must always be written as
           &amp; and a < character must be written as &lt;.

       Although the XML format of the DACS configuration files is easily understood and fairly
       readable, and they can be modified using any text editor, there is nothing to prevent a
       special-purpose tool from being used.

   The Default Section
       The purpose of the Default section in dacs.conf is to establish default values for
       directives that tend to be shared amongst all of the Jurisdiction sections that appear in
       dacs.conf. The Default section is optional; if present, it must appear before any
       Jurisdiction section in dacs.conf.

       The site.conf file, if it exists, consists of only a Default section. Directives that are
       common to all of a site's dacs.conf files might be put in site.conf.

       Any configuration directive or clause may appear in the Default section.

   The Jurisdiction Section
       Each Jurisdiction section contains configuration directives that are associated with a
       particular jurisdiction. These directives override those found anywhere else, as described
       below.

   Section Merging and Directive Evaluation
       The three types of configuration sections are merged as follows. First, directives and
       clauses that appear in the site.conf Default section are overridden by those that appear
       in the dacs.conf Default section. The resulting directives and clauses are in turn
       overridden by those that appear in the selected Jurisdiction section. Usually, site.conf
       will contain the standard default directives that come with the installed release of DACS,
       the dacs.conf Default section will contain directives common to all of the jurisdictions
       defined on the host that are in the same federation, and each Jurisdiction section will
       contain directives specific to that jurisdiction.

       The exception to this merging procedure is directives in the Stack category[13]. Instead
       of overriding, these directives accumulate.

       The order in which directives (but not clauses) appear within a section is not
       significant, even with respect to references to variables in the Conf namespace[14], with
       the exception of the EVAL directive[15].

       Only after directives in the three sections are merged are their right-hand sides
       evaluated (again, with the exception of EVAL[15]) to determine the value of each
       directive. Therefore, if a directive appears in both the Default section and the
       Jurisdiction section, the instances in the Default section will not have their directive
       values evaluated; they will simply be discarded (with the exception of the Stack directive
       category).

       The undef() directive
           As a special case, if a directive is given the special value returned by undef()[16],
           the instance of the directive is deleted. This provides a way to conditionally include
           or exclude a directive depending on the execution environment. For example, this
           directive increases the debugging level for DACS web services but not for commands:

               LOG_LEVEL ${Env::REMOTE_ADDR:e} ? "TRACE" : undef()

               Note
               Because of the way configuration files are currently processed, the check for
               directive category satisfaction happens before right-hand side evaluation. This
               means that in any particular section only one instance of a given directive in the
               Required1 category may appear (see Directive Categories[13]), even if just one
               would be included after the evaluation step.

       Fatal errors
           It is a fatal error to reference an undefined variable unless the e or ?  modifier
           flag[17] is used in the variable reference. Recursive variable references are detected
           and result in a fatal error. If a directive ends up not being evaluated, it does not
           matter whether its right-hand side is invalid (or would be if evaluated).

               Note
               When a fatal error occurs during configuration processing, a DACS web service
               tries to terminate gracefully. But because directives (including error handling
               directives) may not have been processed correctly, or even at all, there is no
               guarantee that an error handler (such as one defined by the ACS_ERROR_HANDLER[18]
               directive) will be invoked or a requested output format will be honoured during
               abnormal termination. A non-zero exit process status is always returned.

       An example
           Consider the following configuration excerpts:

               # In site.conf:
                 LOG_LEVEL "debug"

               # In the dacs.conf Default section:
                 LOG_LEVEL "notice"

               # In the dacs.conf Jurisdiction section:
                 LOG_LEVEL "trace"

           After configuration processing, the directive LOG_LEVEL will be set to "trace", and
           the variable ${Conf::LOG_LEVEL} will have that value during configuration processing.

           Here are some excerpts from a dacs.conf file:

               # In the Default section:
                 FEDERATION_DOMAIN "example.com"
                 FEDERATION_NAME "EXAMPLE"

               # In the Jurisdiction section:
                 JURISDICTION_NAME "DEMO"
                 VFS "[abc]dacs-fs:${Conf::FEDERATIONS_ROOT}/${Conf::FEDERATION_DOMAIN}\
               /${Conf::JURISDICTION_NAME}/abc"

           When computing the VFS directive's value in the example above, the values of the
           FEDERATIONS_ROOT variable (determined at build-time) and the FEDERATION_DOMAIN and
           JURISDICTION_NAME configuration directives are interpolated. Directives in site.conf
           may reference configuration variables that are defined in dacs.conf.

           Given the configuration:

               # In site.conf:
                 VFS "[dtds]dacs-fs:/usr/local/dacs/www/dtd-xsd"

               # In the dacs.conf Default section:
                 VFS "[dtds]dacs-fs:/usr/local/dacs/dtd-xsd"

               # In the dacs.conf Jurisdiction section:
                 VFS "[dtds]dacs-fs:/export/dacs/dtd-xsd"
                 VFS "[xxx]dacs-fs:/export/dacs/xxx"

           All four VFS directives will be in effect, but they will be ordered such that the
           first one in the Jurisdiction section is at the top of the stack, the second one in
           that section is next on the stack, the directive in the dacs.conf Default section
           follows, and the one from site.conf is last.

   Jurisdiction Section Selection
       DACS web services and commands do not have any federation or jurisdiction information
       compiled into them, so that a single set of DACS binaries can be shared by many
       jurisdictions (e.g., by multiple real or virtual web servers on the same host, or using
       NFS or some other file sharing mechanism). But it means that (most) web services and
       commands need a run-time mechanism to determine "who they are" - which federation and
       jurisdiction are they acting on behalf of? For web services, this usually depends on the
       server name, hostname, port, scheme, URI path, some other context associated with the
       request, or a combination of these things. But it is sometimes most convenient to specify
       a jurisdiction name and have DACS work out what the request URIs to that jurisdiction look
       like, if it needs to.

       Most DACS web services and commands need to obtain run-time configuration information for
       the jurisdiction they represent. Because dacs.conf may specify the configuration of more
       than one jurisdiction, how do they know which Jurisdiction section they should use? In
       cases where DACS does not know the jurisdiction name, it searches for the correct
       Jurisdiction section and then determines the name of the jurisdiction; in cases where it
       is given the jurisdiction name, it searches Jurisdiction sections to find one with a
       directive that identifies the jurisdiction that it was given.

       The applicable Jurisdiction section to use for a particular web service request or command
       can be determined in a variety of ways, using:

       •   the -u command line flag to specify a config-uri that is matched against effective
           jurisdictional URIs[19];

       •   the -uj command line flag to specify a jurisdiction-name that is matched against
           Jurisdiction sections' JURISDICTION_NAME directive;

       •   the -us command line flag to indicate that there is only a single Jurisdiction
           section, so that section should be selected; or

       •   by matching a request URI against effective jurisdictional URIs[19].

       Command line flags are described in dacs(1)[5], as is the DEFAULT_JURISDICTION environment
       variable.

       These methods will be described individually shortly.

           Tip
           Because selection of the applicable Jurisdiction section is quite flexible, it may
           seem complicated. In practice, however, it is often rather simple, and particularly so
           if only one jurisdiction is being configured. It may be sufficient to read this
           section and skip the detail presented in the remainder of the discussion on how the
           Jurisdiction section is selected.

       If there is only one jurisdiction, its uri attribute value can simply be the domain name
       associated with the jurisdiction. Any of the command line flags could then be used (or
       none). If the jurisdiction's domain name is foo.example.com, for instance, the
       Jurisdiction section in dacs.conf might look like:

           <Configuration>
             <Jurisdiction uri="foo.example.com">
               JURISDICTION_NAME "FOO"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>
            </Configuration>

       In the Apache configuration file (httpd.conf), one might specify:

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs "-u foo.example.com"

       (which tells DACS that all web service requests from the web server or virtual host to
       which this directive applies should be associated with the domain foo.example.com for
       configuration purposes), or

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs "-us"

       (telling DACS that all web service requests from the web server or virtual host to which
       this directive applies should be associated with the only jurisdiction described in the
       configuration file, whatever that jurisdiction may be), or

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs "-uj FOO"

       (telling DACS that all web service requests from the web server or virtual host to which
       this directive applies should be associated with jurisdiction FOO), or simply

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs

       In the last case, DACS will match the request URI (which presumably looks like
       https://foo.example.com/...) against foo.example.com.

       Multiple jurisdictions that are identified by distinct domain names are also easily
       configured once a DACS administrator decides how he would like request URIs to identify
       them. This is usually done much like this:

           <Configuration>
             <Jurisdiction uri="foo.example.com">
               JURISDICTION_NAME "FOO"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>

             <Jurisdiction uri="baz.example.com">
               JURISDICTION_NAME "BAZ"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>
            </Configuration>

       And so that the domain name in the request URI is matched against the jurisdiction's
       effective URI, one would use:

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs

       Multiple jurisdictions that share a domain name but are distinguished by a portion of the
       request URI pathname component, are often configured something like:

           <Configuration>
             <Jurisdiction uri="example.com/foo">
               JURISDICTION_NAME "FOO"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>

             <Jurisdiction uri="example.com/baz">
               JURISDICTION_NAME "BAZ"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>
            </Configuration>

       And again using:

           AddDACSAuth dacs-acs /usr/local/dacs/bin/dacs_acs

       With this style of configuration, a request for https://example.com/foo/cgi-bin/dacs/blah
       would be directed to the configuration for the FOO jurisdiction.

       Similarly, port numbers can also be used for Jurisdiction section selection:

           <Configuration>
             <Jurisdiction uri="example.com:443">
               JURISDICTION_NAME "FOO"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>

             <Jurisdiction uri="example.com:8443">
               JURISDICTION_NAME "BAZ"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>
            </Configuration>

       Lastly, a hostname wildcard syntax can be useful:

           <Configuration>
             <Jurisdiction uri="*.foo.example.com">
               JURISDICTION_NAME "FOO"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>

             <Jurisdiction uri="*.baz.example.com">
               JURISDICTION_NAME "BAZ"
               FEDERATION_DOMAIN "example.com"
               # And so on...
              </Jurisdiction>
            </Configuration>

           Important
           No check is made to ensure that the jurisdiction sections are unique. This is
           sometimes a useful feature but can also cause unexpected behaviour. It is probably
           best for all but the most advanced administrators to make sure that the same
           JURISDICTION_NAME directive doesn't appear in multiple Jurisdiction sections and that
           each section has a different effective jurisdictional URI.

       If your particular requirement has been covered, it is probably safe to skip the detail
       that follows.

       The Effective Jurisdictional URI
           A Jurisdiction element must have either a uri attribute or a uri_expr attribute, but
           not both. If the latter is given, it specifies an expression[20] that is evaluated at
           configuration processing time. The effective jurisdictional URI (or the jurisdiction's
           effective URI) is either the value of the uri attribute or the value obtained by
           evaluating the uri_expr attribute. The effective jurisdictional URI can be matched
           against a request's URI or the -u flag's config-uri to find the applicable
           Jurisdiction section.

           The standard set of configuration variables[21] in the Conf and Env namespace[14] (but
           no others) are accessible during evaluation of uri_expr. Consider this partial
           configuration:

               <Jurisdiction uri_expr="${Env::SERVER_NAME}">

           Here, the effective jurisdictional URI is the value of the SERVER_NAME environment
           variable.

               Note
               •   The environment established for a DACS web service and the environment of a
                   DACS command are typically different, so programs run from the command line
                   may fail if uri_expr references an undefined variable.

               •   Any error that occurs during evaluation of uri_expr is fatal.

               •   One application of the uri_expr attribute is constructing a generic or
                   "template" Jurisdiction section. For example, if multiple domain names need to
                   map to the same jurisdiction, a uri_expr like the following can be used:

                       <Jurisdiction uri_expr="regmatch(${Env::SERVER_NAME}, '(foo.example.com)|(baz.example.com)')">

           The effective jurisdictional URI has the following syntax:

               uri         -> [scheme-spec] [domain-spec] [":" port-spec] [path-spec]
               scheme-spec -> "http://" | "https://"
               domain-spec -> domain-name | "*." domain-name | IP-address
               port-spec   -> positive-integer | positive-integer "," port-spec
               path-spec   -> "/" path-segment | "/" path-segment path-spec

       Jurisdiction Selection by URI
           Whether the Jurisdiction section is selected based on the -u flag's explicit
           config-uri or the request URI provided to DACS through environment variables, the
           effective jurisdictional URIs are matched against the provided URI.

           An effective jurisdictional URI has the following semantics for matching against the
           provided URI:

           •   If uri specifies the http scheme, the provided UR must not have used SSL/TLS; if
               uri specifies the https scheme, the provided URI must have used SSL/TLS; if
               neither scheme is specified, the scheme is immaterial.

           •   The optional domain-spec specifies a domain name to match (case-insensitively)
               against the provided URI. If the initial component of domain-spec is "*.", then
               only the components that follow it in domain-spec need to match the domain name in
               the provided URI. For example, *.example.com matches example.com and
               foo.baz.example.com. If the domain-spec is omitted, the domain name in the
               provided URI is immaterial.

                   Note
                   The matching algorithm does not consider domain names that map to the same IP
                   address (i.e., aliases) to be equivalent.

               The domain-spec can be an IP address, but in this case the provided URI must also
               use an IP address for the two to match. That is, no mapping between IP addresses
               and domain names is performed.

           •   The optional port-spec consists of one or more port numbers, any one of which must
               match the one specified explicitly (i.e., not by default) in the provided URI. If
               the provided URI does not contain a port, it will not match any port-spec. Port
               numbers are separated by a comma (with no embedded whitespace). If the port-spec
               is omitted, the port number in the provided URI is immaterial.

           •   The optional path-spec must match the prefix of the provided URI's path component.
               Matching is case-sensitive and is performed on corresponding path-segment
               elements.

           The matching algorithm first rejects any Jurisdiction section having an effective
           jurisdictional URI that does not satisfy the scheme-spec or the domain-spec. It looks
           for the section that contains a matching port-spec and that has the longest matching
           path-spec; the first such section will be selected. If no such section is found,
           however, it looks for the section that does not contain a port-spec and that has the
           longest matching path-spec; the first such section will be selected. It is a fatal
           error if no section can be selected.

               Tip
               While configuration of the uri attribute may appear to be complex, its value will
               typically be a simple hostname, or a simple hostname followed by a
               jurisdiction-distinguishing initial path element, as in the example above. The
               flexible syntax allows jurisdictions to be associated with requests based on port
               numbers, use of SSL/TLS, etc. and lets dissimilar requests map to the same
               jurisdiction.

           For example, given the example configuration[22] above, if the request URL is:

               https://dss.example.com/foo/cgi-bin/dacs_authenticate

           then the second Jurisdiction section will be used.

           If the request URL is:

               https://dss.example.com/cgi-bin/dacs_authenticate

           then the first Jurisdiction section will be used.

           If a DACS utility is invoked with the command line flag -u metalogic.example.com, the
           third Jurisdiction section will be used.

       Jurisdiction Selection by Jurisdiction Name
           The applicable Jurisdiction section can be selected by providing the jurisdiction's
           name. The -uj flag's jurisdiction-name argument is compared against the unevaluated
           value of each section's JURISDICTION_NAME directive until the first exact string match
           is found; the section containing the directive will be selected.

               Note
               Because the unevaluated value of the directive is used, if the value of a
               JURISDICTION_NAME is not a simple string, this option will not work unless
               jurisdiction-name is that expression, not its value. Appropriate quotes are
               implied around jurisdiction-name, so they should be omitted on the command line.

               For example, given the (partial) configuration file entry:

                   <Jurisdiction uri="demo.example.com">
                   JURISDICTION_NAME "DEMO"
                   ...
                   </Jurisdiction>

               the command line argument "-uj DEMO" would select that jurisdiction section. If
               instead JURISDICTION_NAME were an expression that evaluated to the string DEMO,
               the argument would not select that jurisdiction section.

       Jurisdiction Selection by Default
           If dacs.conf contains a single Jurisdiction section, the -us flag can be used to
           select it without regard to the jurisdiction's name or effective jurisdictional URI.
           This can be particularly useful during testing.

           Should there be more than one Jurisdiction section when this flag is used, a fatal
           error will occur.

       The Distinguishing URI
           Regardless of how the Jurisdiction section is selected, that section's effective
           jurisdictional URI is matched against the -u flag's config-uri, if given, or the
           request URI according to the method described for Jurisdiction Selection by URI[23].
           The resulting string is called the distinguishing URI. This string is another way of
           identifying the selected Jurisdiction section and can be used for string
           interpolation[24]. It is also related to the shared attribute used in access control
           rules[25].

           For example, if the request URI is http://foo.example.com/a/b/c and the matching
           effective jurisdictional URI is *.example.com/a/b, then the distinguishing URI is
           foo.example.com/a/b.

   Directives
       Each directive consists of a directive name, followed by whitespace (spaces and/or tabs),
       followed by its value. Directive names are case-sensitive and comprised of printable
       characters, except the space character, and are upper case.

       A directive value is an expression or sequence of expressions (dacs.exprs(5)[20]) that is
       evaluated at run time during configuration processing. Here are some directives that are
       equivalent (on a Saturday):

           AUTH_FAIL_DELAY_SECS 2
           AUTH_FAIL_DELAY_SECS "2"
           AUTH_FAIL_DELAY_SECS 1 + 1
           AUTH_FAIL_DELAY_SECS strftime("%a") eq:i "Sat" ? 2 : 17

       Blank lines, leading white space, and lines whose first non-white space character is a #
       character (i.e., comments) are ignored.

       Any directive line may be split over physical lines by escaping the newline character, for
       example:

           ACS_ERROR_HANDLER "902 'Access denied, \
           user not authenticated'"

       Processing an unrecognized directive name causes a fatal error, as does an error
       encountered during expression evaluation.

       Evaluated Directives
           Some directive names end with a * character. By convention, this means that the
           directive's value will be evaluated a second time, in the context of a particular
           module or service request, but only if the directive value is actually needed. This
           allows a configuration directive to reference a variable that cannot be instantiated
           until normal configuration file processing has been performed, for instance. The
           values of these directives usually appear within single quotes so that they initially
           evaluate to the string between the quotes.

           Consider this INIT*[26] directive, which might appear within an Auth clause[27]:

                 INIT* '${Auth::CURRENT_USERNAME} = "goa\\" . ${Auth::CURRENT_USERNAME}'

           Because the directive's value appears within single quotes, the quoted expression is
           not evaluated during the first scan of the directive (or more accurately, it evaluates
           to an unquoted expression); this is as it should be because the value of the
           referenced variable is not known at that time, nor has it been determined whether the
           directive will even be needed. Later, if the Auth clause containing this directive is
           used, the variable's value is presumably known and the formerly quoted expression is
           evaluated, yielding a final value for the directive.

       Directive Categories
           After section merging[28] is performed, some directives must be specified while others
           are optional. Some may appear at most once and others may be repeated. The following
           labels are used to categorize directives:

           Required1:
               Directives of this category must be defined and must appear only once after
               merging.

           Required1-C:
               Under certain conditions, these directives must be defined and appear only once
               after merging, otherwise they need not appear. For example, some directives are
               required if and only if the module that requires them is configured.

           Required:
               These directives must always be specified at least once after merging, and may be
               repeated.

           Optional1:
               These directives may appear at most once after merging.

           Optional:
               These directives may appear zero or more times after merging.

           Stack:
               This is like the Optional type, in that the directive may appear multiple times in
               any section, except the usual section merging algorithm is not used. Instead, all
               occurrences of the directive in the Jurisdiction section, then in the Default
               section of dacs.conf, and then in site.conf will be "stacked", in the order in
               which they appear in each section. Selection is dependent on the particular
               directive, which will effectively search the directives in the Jurisdiction
               section first to find an applicable directive, then search the directives in the
               Default section of dacs.conf if necessary, and finally search site.conf if
               necessary.

               Note
               A directive marked Deprecated will be removed in a future version and should not
               be used.

           Some directives have more complicated constraints on their usage; they might be
           allowed only in certain contexts or are required only in certain situations (e.g.,
           directives associated with proxied operation are only required if that mode of
           operation is being used).

           Required directives must be present and assigned a valid value, although the validity
           of a value is only checked if the directive is actually used. It is okay to define
           directives that are not used; for example, directives related to InfoCards may appear
           in a configuration file even if InfoCard support is not enabled at the time DACS is
           built. Some configuration directives may appear multiple times, others only once. The
           order in which configuration directives appear within a section is not usually
           significant, although it may be in cases where the directive is repeated (e.g.,
           ACS_ERROR_HANDLER) and for clauses (e.g., the Auth clause).

               Note
               Directives that expect to be assigned a value of yes, no, on, or off recognize
               these keywords case-insensitively.

       General Directives
           The following general directives are provided. If present, they must appear within any
           Default section or Jurisdiction section, but outside of any clauses.

           Directive Index:

            1. ACCEPT_ALIEN_CREDENTIALS (Optional1)

            2. ACS_ACCESS_TOKEN_ENABLE (Optional1)

            3. ACS_ACCESS_TOKEN_LIFETIME_LIMIT (Required1-C)

            4. ACS_ACCESS_TOKEN_LIFETIME_SECS (Required1-C)

            5. ACS_AUTHENTICATED_ONLY (Optional1)

            6. ACS_CREDENTIALS_LIMIT (Optional1)

            7. ACS_EMIT_APPROVAL (Optional1)

            8. ACS_ERROR_HANDLER (Stack)

            9. ACS_FAIL (Optional1)

           10. ACS_INACTIVITY_LIMIT_SECS (Optional1)

           11. ACS_POST_BUFFER_LIMIT (Optional1)

           12. ACS_POST_EXCEPTION_MODE (Optional1)

           13. ACS_PRE_AUTH (Optional)

           14. ACS_SUCCESS (Optional)

           15. ACS_TRACK_ACTIVITY (Optional1)

           16. ADMIN_IDENTITY (Optional)

           17. ALLOW_HTTP_COOKIE (Optional1)

           18. AUTH_AGENT_ALLOW_ADMIN_IDENTITY (Optional1)

           19. AUTH_CREDENTIALS_ADMIN_LIFETIME_SECS (Optional1)

           20. AUTH_CREDENTIALS_DEFAULT_LIFETIME_SECS (Required1)

           21. AUTH_ERROR_HANDLER (Stack)

           22. AUTH_FAIL (Optional1)

           23. AUTH_FAIL_DELAY_SECS (Optional1)

           24. AUTH_SINGLE_COOKIE (Optional1)

           25. AUTH_SUCCESS (Optional)

           26. AUTH_SUCCESS_HANDLER (Optional1)

           27. AUTH_TRANSFER_EXPORT (Optional)

           28. AUTH_TRANSFER_TOKEN_LIFETIME_SECS (Optional1)

           29. COMPAT_MODE (Optional1)

           30. COOKIE_HTTPONLY (Optional1)

           31. COOKIE_NAME_TERMINATORS (Optional1)

           32. COOKIE_NO_DOMAIN (Optional1)

           33. COOKIE_PATH (Optional1)

           34. CSS_PATH (Optional1)

           35. DTD_BASE_URL (Optional1)

           36. EVAL (Optional)

           37. FEDERATION_DOMAIN (Required1)

           38. FEDERATION_NAME (Required1)

           39. HTTP_AUTH (Stack)

           40. HTTP_AUTH_ENABLE (Optional1)

           41. HTTP_PROG (Required1)

           42. INFOCARD_AUDIENCE (Optional)

           43. INFOCARD_AUDIENCE_RESTRICTION (Optional)

           44. INFOCARD_CARD_DEFS_URL (Optional1)

           45. INFOCARD_CARD_FILL_URL (Optional1)

           46. INFOCARD_CARD_IMAGE_BASE_URL (Required1-C)

           47. INFOCARD_CARD_LIFETIME_SECS (Optional1)

           48. INFOCARD_CARD_OUTPUTDIR (Optional1)

           49. INFOCARD_CARD_VERSION (Optional1)

           50. INFOCARD_CARDID_BASE_URL (Required1-C)

           51. INFOCARD_CARDID_SUFFIX (Optional1)

           52. INFOCARD_CARD_DATETIME_EXPIRES (Optional1)

           53. INFOCARD_DIGEST (Optional1)

           54. INFOCARD_IP_PRIVACY_URL (Required1-C)

           55. INFOCARD_IP_PRIVACY_VERSION (Optional1)

           56. INFOCARD_ISSUER_INFO_ENTRY (Optional)

           57. INFOCARD_MEX_URL (Required1-C)

           58. INFOCARD_REQUIRE_APPLIES_TO (Optional1)

           59. INFOCARD_STRONG_RP_IDENTITY (Optional1)

           60. INFOCARD_STS_AUTH_TYPE (Required1-C)

           61. INFOCARD_STS_CACERTFILE (Required1-C)

           62. INFOCARD_STS_CERTFILE (Required1-C)

           63. INFOCARD_STS_KEYFILE (Required1-C)

           64. INFOCARD_STS_KEYFILE_PASSWORD (Required1-C)

           65. INFOCARD_STS_PASSWORD_METHOD (Required1-C)

           66. INFOCARD_STS_RP_ENDPOINT (Optional)

           67. INFOCARD_TOKEN_DRIFT_SECS (Optional1)

           68. INFOCARD_TOKEN_ISSUER (Required1-C)

           69. INFOCARD_TOKEN_LIFETIME_SECS (Optional1)

           70. INFOCARD_TOKEN_MAX_LENGTH (Optional1)

           71. INFOCARD_USERNAME_SELECTOR (Optional1)

           72. JURISDICTION_NAME (Required1)

           73. LOGINGEN_FILE (Optional1)

           74. LOGINGEN_PROG (Optional1)

           75. LOG_FILE (Optional1)

           76. LOG_FILTER (Stack)

           77. LOG_FORMAT (Optional1)

           78. LOG_LEVEL (Optional1)

           79. LOG_SENSITIVE (Optional1)

           80. NAME_COMPARE (Optional1)

           81. NOTICES_ACCEPT_HANDLER (Optional1)

           82. NOTICES_ACK_HANDLER (Optional1)

           83. NOTICES_DECLINE_HANDLER (Optional1)

           84. NOTICES_NAT_NAME_PREFIX (Optional1)

           85. NOTICES_SECURE_HANDLER (Optional1)

           86. NOTICES_WORKFLOW_LIFETIME_SECS (Optional1)

           87. PAMD_HOST (Optional1)

           88. PAMD_PORT (Optional1)

           89. PASSWORD_CONSTRAINTS (Optional1)

           90. PASSWORD_DIGEST (Optional1)

           91. PASSWORD_OPS_NEED_PASSWORD (Optional1)

           92. PASSWORD_SALT_PREFIX (Optional1)

           93. PERMIT_CHAINING (Optional1)

           94. PROXY_EXEC_DOCUMENT_ROOT (Optional1)

           95. PROXY_EXEC_MAPPER_DEFAULT_ACTION (Optional1)

           96. PROXY_EXEC_MAPPER_LOGGING (Optional1)

           97. PROXY_EXEC_MAPPER_LOG_FILE (Optional1)

           98. PROXY_EXEC_MAPPER_RULES_FILE (Optional1)

           99. PROXY_EXEC_PROG_URI (Optional1)

           100. RLINK (Optional)

           101. ROLE_STRING_MAX_LENGTH (Optional1)

           102. SECURE_MODE (Optional1)

           103. SIGNOUT_HANDLER (Optional1)

           104. SSL_PROG (Optional1)

           105. SSL_PROG_ARGS (Optional1)

           106. SSL_PROG_CA_CRT (Optional1)

           107. SSL_PROG_CLIENT_CRT (Optional1)

           108. STATUS_LINE (Optional1)

           109. TEMP_DIRECTORY (Optional1)

           110. TOKEN_REQUIRES_PIN (Optional1)

           111. TOKEN_HOTP_ACCEPT_WINDOW (Optional1)

           112. TRACE_LEVEL (Optional1)

           113. UNAUTH_ROLES (Optional1)

           114. UPROXY_APPROVED (Stack)

           115. VERBOSE_LEVEL (Optional1)

           116. VERIFY_IP (Required1)

           117. VERIFY_UA (Optional1)

           118. VFS (Stack)

           119. XSD_BASE_URL (Optional1)

           ACCEPT_ALIEN_CREDENTIALS (Optional1)
               If "yes", DACS will honour credentials imported (by any means) from a different
               federation. As a security precaution, such credentials are not used by default.

                   Security
                   In federations where dacs_auth_transfer(8)[29] is used, jurisdictions will
                   likely enable this capability.

           ACS_ACCESS_TOKEN_ENABLE (Optional1)
               If "yes", ACS's access token mechanism will be enabled. By default, this feature
               is disabled. Please see Authorization Caching[30] for details.

           ACS_ACCESS_TOKEN_LIFETIME_LIMIT (Required1-C)
               If ACS's access token mechanism has been enabled, this is the number of times that
               an access token may be used. It must be an integer greater than zero. There is no
               default value. This value, ACS_ACCESS_TOKEN_LIFETIME_SECS, or both must be
               configured properly if the mechanism is enabled. Because it requires updating a
               database entry, this method of enforcing a limit on the lifetime of an access
               token is inherently less efficient than using ACS_ACCESS_TOKEN_LIFETIME_SECS.
               Changes to this limit do not affect access tokens that have already been issued.
               Please see Authorization Caching[30] for details.

           ACS_ACCESS_TOKEN_LIFETIME_SECS (Required1-C)
               If ACS's access token mechanism has been enabled, this is the lifetime in seconds
               of an access token, and must be an integer greater than zero. There is no default
               value. This value, ACS_ACCESS_TOKEN_LIFETIME_LIMIT, or both must be configured
               properly if the mechanism is enabled. Please see Authorization Caching[30] for
               details.

           ACS_AUTHENTICATED_ONLY (Optional1)
               If "yes", ACS will deny all requests that are not accompanied by valid
               credentials, regardless of any access control rules or other directives.

                   Note
                   Since this restriction also applies to DACS services, if this mode is enabled
                   an unauthenticated user will not be able to access DACS services by which he
                   might authenticate himself. Users must therefore have authenticated before
                   this directive is enabled, authenticate using an off-line method (such as
                   dacscookie(1)[31] or dacsauth(1)[32]), or authenticate at some other
                   jurisdiction.

           ACS_CREDENTIALS_LIMIT (Optional1)
               The value of this directive is either an unsigned integer greater than zero, or
               the keyword "none" (case insensitive). In the former case, if a request is
               submitted with more than this number of valid credentials, the request will be
               denied with the REVOKED error (equivalent to error code 903).

               Probably the most common application of this directive is to limit each request to
               being associated with at most one identity. The standard site configuration sets
               ACS_CREDENTIALS_LIMIT to one. This eliminates confusion about which identity
               invoked a web service (i.e., which identity REMOTE_USER should be set to, for
               instance) and ambiguity regarding the semantics of rules, and in some cases may
               simplify access control rules and log file audits.

               A user denied access at a jurisdiction due to this directive will be denied access
               to dacs_signout(8)[33] at the jurisdiction. To regain access to the jurisdiction,
               the user will either need to signout from a different jurisdiction or delete one
               or more sets of credentials (cookies) from his browser, either using the browser's
               cookie manager or by terminating the browser session.

                   Note
                   It is possible for a user that is not denied access at a jurisdiction due to
                   this directive to successfully authenticate, after which he will have "too
                   many" credentials and subsequently be denied access. Similarly, a DACS
                   administrator may reduce the limit at any time, potentially causing access to
                   be denied to users holding a number of credentials in excess of the limit.

                   Security
                   This directive only limits the number of credentials associated with a single
                   request. It does not prevent the same individual from sending different
                   requests, from the same browser or different browsers, each associated with a
                   different identity. Also, it does not limit the number of concurrent logins of
                   the same identity (such as by different individuals sharing the same account).

                   DACS does not limit a user's number of concurrent logins or the number of
                   concurrent logins of the same identity because of the inherent drawbacks of a
                   general implementation of such a feature. In simple cases, however, an
                   administrator may be able to add a custom solution to DACS.

           ACS_EMIT_APPROVAL (Optional1)
               If "yes", DACS will generate a DACS_APPROVAL environment variable that can be
               inspected by an invoked program to verify that its use in the current context was
               authorized by DACS. Before this feature is enabled, additional configuration is
               necessary; see The DACS_APPROVAL environment variable[34] for details.

           ACS_ERROR_HANDLER (Stack)
               If DACS denies a service request, the web server's DACS module will be so informed
               and will return a 403 ("Forbidden") status code to the web server. By using
               Apache's ErrorDocument directive, the resulting action taken by Apache can be
               customized.

               In some situations following denial of a request, however, it is desirable to
               initiate an action that depends on the reason for denial. For example, if access
               is denied because the user is not authenticated, the DACS administrator might want
               users to be redirected to a login page; if access is denied because an access
               control rule denies access although the user is authenticated, the administrator
               might want users to be redirected to a page that displays a custom error message.
               It is sometimes useful for the action to depend on the resource being requested.

               The ACS_ERROR_HANDLER directive defines (or overrides) Apache's behaviour with
               respect to an ErrorDocument directive for 403 errors if DACS denies a service
               request. The syntax and meaning of this directive are similar to that of Apache's
               ErrorDocument directive. Please refer to the Apache documentation for a
               description of the ErrorDocument directive[35].

               Also refer to the description of the redirect()[36] function.

               The syntax of the directive is:

                   [url_pattern] error-code [handler-type] [error-action]

               The optional url_pattern is a URI path component that is matched against the
               request for which access was denied. It must begin with a '/'. It is like the
               url_pattern used in access control rules[37] in that it can require an exact match
               or end in "/*"; no query argument component is allowed. If it is absent, the
               url_pattern defaults to "/*", which matches any path.

               The error-code is either a numeric error code, an equivalent case-insensitive
               error-name, or the special symbol "*", which means the directive applies to any
               DACS error code for which there is no explicit directive.

               The following error-name and error-code values are defined:

               NO_RULE (900)
               Access denied, no applicable rule
                   All rules were examined but no rule applies to the service request.

               BY_RULE (901)
               Access denied, forbidden by rule
                   The closest matching rule does not grant the service request.

               NO_AUTH (902)
               Access denied, user not authenticated
                   No valid credentials were provided and either a) no rule applies or b) the
                   rule does not grant the service request.

               REVOKED (903)
               Access denied, user access revoked
                   Credentials were explicitly revoked.

               BY_REDIRECT (904)
               Access denied, redirect
                   A rule has explicitly redirected the user.

               ACK_NEEDED (905)
               Access denied, acknowledgement needed
                   One or more notices associated with the request must be acknowledged.

               LOW_AUTH (906)
               Access denied, low authentication level
                   Although valid credentials were provided, they were obtained by an
                   authentication method not strong enough for the requested resource.

               BY_SIMPLE_REDIRECT (907)
               Access denied, simple redirect
                   A rule has explicitly redirected the user; do not append DACS query arguments.

               CREDENTIALS_LIMIT (908)
               Access denied, too many credentials were submitted
                   Too many selected credentials accompanied the request.

               INACTIVITY (909)
               Access denied, inactivity timeout
                   No authenticated requests were made within a designated time interval.

               ADMIN_REQUIRED (910)
               Access denied, administrator credentials required
                   Access was denied because credentials that satisfy dacs_admin()[38] were not
                   sent with the request. Although this may not be the sole reason for access to
                   be denied, it should be taken as a hint that the request is likely to succeed
                   if it is retried with administrator credentials. Also see ADMIN_IDENTITY[39].

               UNKNOWN (998)
               Access denied, reason unknown
                   An error occurred during processing but no additional information is
                   available.

               DEFAULT (*)
               Control symbol
                   Not an error name, but a keyword used with ACS_ERROR_HANDLER to configure a
                   handler to invoke if no handler is explicitly configured for the event.

               No blanks may precede the code, any number of blanks may follow it. The
               descriptive-text consists only of printable characters (e.g., no tabs or newlines)
               and may not contain a colon. The descriptive-text is subject to change, but the
               meaning of the code number is fixed. When DACS returns a numeric error code, a
               program only needs to examine the three digit code to determine why access was
               denied. Optionally, the standard text may be followed by a single space, a colon,
               at least one space, and a more detailed error message.

               If a handler-type keyword appears, it selects the action the handler should take
               and disables the heuristics that would otherwise be used to decide the type based
               on the syntax of the error-action. The reason and default keywords are the only
               handler-type keyword that are not followed by an error-action.

               The following handler-type keywords and error-action arguments are recognized:

                1. reason

                   DACS will cause Apache to display the DACS error code that identifies the
                   reason for denying access followed by the corresponding textual message.
                   Apache might display messages like the following:

                       900 Access denied, no applicable access control rule
                       998 Access denied, internal error: Cookie parse error

                2. default

                   This form instructs DACS not to alter Apache's behaviour (as if there was no
                   ACS_ERROR_HANDLER specified at all).

                3. [url] URL

                   This form will cause Apache to redirect the client to URL using the GET
                   method. If the url keyword is absent, URL must begin with the four characters
                   "http". An invalid URL may be rejected by Apache and treated as a message. The
                   URL may contain a properly escaped query string; DACS will append the
                   following parameters, in the order given, to URL (unless the error name is
                   BY_SIMPLE_REDIRECT, in which case none of these parameters is passed):

                    1. DACS_ERROR_CODE, the DACS error code.

                    2. DACS_VERSION, the version number of DACS (e.g., "1.4").

                    3. DACS_FEDERATION, the federation that received the service request, if
                       available.

                    4. DACS_JURISDICTION, the jurisdiction that received the service request, if
                       available.

                    5. DACS_HOSTNAME, the domain name of the host that received the service
                       request, if available.

                    6. DACS_USER_AGENT, if provided by the user agent, this is an identifying
                       string, such as:

                           Mozilla/3.01 (X11; U; Linux 2.4.2 i386)

                    7. DACS_REQUEST_METHOD, the method used to invoke the service request, if
                       available. For example, "GET" or "POST".

                    8. DACS_ERROR_URL, the service request URL, including any query string
                       component. The values of these parameters are URL encoded.

                4. [localurl] /local-URL

                   This form is similar to the absolute URL form except that redirection is to a
                   local URL-path. The error-action must begin with a slash. The URL may contain
                   a properly escaped query string; DACS will append additional parameters as in
                   the absolute URL form.

                5. [message] \"a message\"

                   This form causes Apache to emit the given string as the error document. If the
                   message keyword is absent, the string must be surrounded by double quote
                   characters (the quotes do not appear in the final output message).

                       Note
                       Apache always sets the Content-Type for this message to text/html.
                       Although reported quite some time ago, Bug 3641[40] is still open. There
                       may be a bug in Apache 2.X that prevents the initial double quote in the
                       message from being stripped; see Bug 42430[41].

                6. expr expression

                   The expr keyword, which cannot be omitted, indicates that the error-action is
                   an expression. The expression is evaluated and its value (a string) is used as
                   the Apache error response. If an error occurs during evaluation, the Apache
                   ErrorDocument or default behaviour will be used.

               This directive may appear multiple times. Because these directives are stacked,
               during handler processing directives are examined "backwards", starting from the
               last one that appears in the relevant jurisdiction section through to the first
               one that appears in the default section of dacs.conf and backwards through
               site.conf. The first directive having a url_pattern and error-code that match the
               error condition exactly is used. Otherwise, if no such exact match if found, the
               first directive encountered having the closest url_pattern match and exact
               error-code match is used; failing that, the first directive with the closest
               url_pattern match and default ("*") error-code match is used.

               Consider these example directives:

                   ACS_ERROR_HANDLER "* reason"
                   ACS_ERROR_HANDLER '903 "Your access has been revoked"'
                   ACS_ERROR_HANDLER "/foo/* * /cgi-bin/dacs/foohandler"
                   ACS_ERROR_HANDLER "/foo/foo.html NO_AUTH /cgi-bin/foo-login.cgi"

               A request for /foo/foo.html that is denied because the user is not authenticated
               will cause a redirect to /cgi-bin/foo-login.cgi. If the request is denied for a
               different reason, the third directive will be used, causing a redirect to
               /cgi-bin/dacs/foohandler. A request for something not located under /foo that is
               denied because access is revoked will cause the message specified in the second
               directive to be displayed to the user, while any other type of error will cause an
               appropriate explanatory message to be displayed.

               Here is an example of the expr handler form:

                   ACS_ERROR_HANDLER "* expr '\"&lt;em>Today is&lt;/em> \" . strftime(\"%D\")'"

               If triggered, this directive will emit a message similar to the following as
               Apache's custom error response:

                   <em>Today is</em> 05/16/07

               As with all such messages, Apache forces the Content-Type to be text/html.

               These two directives are equivalent:

                   ACS_ERROR_HANDLER "* message 'Hello world.'"
                   ACS_ERROR_HANDLER "* \"Hello world.\""

               The error response returned by Apache will be:

                   Hello world.

               Any invalid directive will result in Apache following its configured behaviour. A
               directive with a syntactically valid but undefined error-code is ignored, however.

               In the case where the service request was issued by Internet Explorer, if the
               length of the error response by the server isn't greater than some magic value and
               IE's "Show friendly HTTP error messages" is enabled, which it is by default, then
               IE will ignore the custom message. When the "message" and "reason" handler types
               are used, DACS adds some padding to thwart IE's "cleverness". For other handler
               types, the administrator is responsible for working around this problem.

                   Note
                   Care must be taken to avoid improper operation (such as a potentially infinite
                   regress) if a CGI program invoked to handle an error is itself protected by
                   DACS. One example is the situation where a user's access has been revoked and
                   is therefore unable to access any DACS-protected resource. If an error occurs
                   while DACS is processing a request for a handler, DACS will fall back to
                   Apache's default behaviour, ignoring any normally applicable ACS_ERROR_HANDLER
                   directives.

           ACS_FAIL (Optional1)
               If dacs_acs denies access, the given expression is evaluated just before the
               ACS_ERROR_HANDLER[18] directive, if any, is processed. This directive provides a
               hook for post-authorization actions to be performed. The namespaces in effect
               during authorization processing are accessible to the expression. The value of the
               expression is discarded and any errors are ignored.

           ACS_INACTIVITY_LIMIT_SECS (Optional1)
               This directive enables inactivity detection if it is set to a non-zero unsigned
               integer. Inactivity detection is applicable only when valid selected credentials
               accompany a request (i.e., at least one identity is associated with the request -
               see dacs_select_credentials(8)[42]).

               There are two cases. If an activity tracking cookie is not sent with the current
               request (see ACS_TRACK_ACTIVITY[43]), the user is deemed to be inactive if the
               newest credentials are older than ACS_INACTIVITY_LIMIT_SECS seconds. If an
               activity tracking cookie is received, the user is deemed to be inactive if the
               date/time that it asserts is older than ACS_INACTIVITY_LIMIT_SECS seconds. If
               inactivity is detected by dacs_acs(8)[6], access is denied and an INACTIVITY error
               (909) is raised; see ACS_ERROR_HANDLER[18]. At present, the only way for a user to
               continue after an inactivity error is to explicitly delete DACS cookies or
               implicitly delete them by restarting the browser. A non-DACS-wrapped web page or
               CGI program might be invoked as an error handler to assist.

               Different jurisdictions may independently configure different inactivity
               thresholds, disable inactivity detection, or disable activity tracking - the
               degree to which this feature improves security or is annoying to users depends on
               thoughtful cooperation amongst jurisdictions and adequate clock synchronization.

           ACS_POST_BUFFER_LIMIT (Optional1)
               This is the counterpart to the SetDACSAuthPostBuffer[44] directive of DACS's
               mod_auth_dacs[7] Apache module. It establishes the maximum number of bytes of
               environment and POST stream that DACS should read from mod_auth_dacs[7],
               overriding the compile-time default. To allow for encoding overhead when
               serializing the message body, ACS_POST_BUFFER_LIMIT should be at least 50% larger
               than the SetDACSAuthPostBuffer size. A value of zero imposes no limit. (Ideally,
               only one of these values would need to be configured but you must currently ensure
               that both of them are set to reasonable values.)

           ACS_POST_EXCEPTION_MODE (Optional1)
               In the event that the web server has not made all of the request's arguments
               available to DACS for access control processing (see SERVICE_ARGS_TRUNCATED[45]),
               this directive tells dacs_acs(8)[6] what to do. The following keywords are
               recognized values:

               abort
                   Access control processing stops and access is denied.

               default
                   This is equivalent to discard.

               discard
                   Processing continues, but all web service arguments are ignored and none will
                   be available to access control rules.

               proceed
                   Continue processing, even though one or more arguments may be corrupted or
                   missing. This may result in a segmentation fault or other unrecoverable error.

               query
                   Continue processing, discarding all POST arguments but including any arguments
                   that were passed in the request URI's query component.

           ACS_PRE_AUTH (Optional)
               Similar to the pre-authorization authentication feature configured through the
               HTTP_AUTH[46] directive, this directive provides a way to authenticate - or
               identify - a user at access control time. Rather than involving HTTP Basic or
               Digest authentication, however, the value of the directive is an expression that
               is evaluated. If the result is a syntactically valid username[47], credentials are
               created that (normally) exist only for the duration of the authorization check and
               which are associated with the current jurisdiction[48]. This directive provides a
               hook for associating an identity with a request based on the request itself (such
               as the request URI, its arguments, and other context).

               As a simple example, the following directive checks if the request includes a
               USERNAME argument, and if so, just uses it:

                   ACS_PRE_AUTH '${Args::USERNAME:e} ? ${Args::USERNAME} : ""'

               Note the single quotes around the expression so that it is evaluated at access
               control time instead of configuration processing time.

               The ACS_PRE_AUTH directives are processed if a request is received that does not
               include valid credentials and if not disabled by ACS_AUTHENTICATED_ONLY[49]. If
               more than one ACS_PRE_AUTH directive is given, they are evaluated in the order in
               which they appear until one returns a valid username. If that expression sets the
               variable ${Auth::ROLES} to a valid role string, it will be included in the
               credentials (see dacs_authenticate(8)[50]). Evaluation errors are ignored. If no
               expression returns a valid username, access control processing continues.

               These directives are processed before any HTTP_AUTH directives; if a ACS_PRE_AUTH
               directive is successful, the user will effectively be authenticated and so no
               HTTP_AUTH directives will be processed.

               If the request includes a -rname flag with the DACS_ACS[51] argument, its value is
               ${Args::RNAME}.

               Unlike when authentication is done through dacs_authenticate(8)[52], credentials
               are not returned to the client. This means that no DACS session state exists
               outside of dacs_acs and therefore some DACS web services may be unavailable or may
               not operate in the same way they would if credentials were provided by the client.
               This mechanism may also be less efficient than one that returns credentials
               because authentication will be performed each and every time the client makes a
               request that triggers it.

           ACS_SUCCESS (Optional)
               If dacs_acs grants access, immediately before it terminates it evaluates the given
               expression. This directive provides a hook for post-authorization actions to be
               performed, which can be user-specific. The namespaces in effect during
               authorization processing are accessible to the expression. The value of the
               expression is discarded and any errors are ignored.

               Also see the on_success()[53] function.

                   Note
                   While it is typically true that if DACS grants a request, the web server will
                   go on to process the request (and eventually return a web page to the user
                   agent, execute a program, etc.), it is not necessarily so. For example, access
                   may still be denied by the web server for other reasons, or an error can occur
                   during subsequent processing. This may be relevant in situations where
                   ACS_SUCCESS is used to decrement a counter[54], for instance, because it is
                   possible that the user may not actually see a successful result, in which case
                   the counter value should not have been changed and so corrective action would
                   be required.

           ACS_TRACK_ACTIVITY (Optional1)
               This directive is associated with the inactivity timeout feature whereby an
               authenticated user is denied access (at any jurisdiction where it is enabled
               within the current federation[55]) if no web service request is made within a
               certain time period (also at any jurisdiction where it is enabled within the
               current federation[55]). See ACS_INACTIVITY_LIMIT_SECS[56]. This feature is
               disabled by default. It is enabled on a per-jurisdiction basis, and in the usual
               configuration all jurisdictions within a federation will enable the feature if it
               is required.

               If the directive's value is "yes", dacs_acs(8)[6] emits a federation-wide HTTP
               cookie that notes the jurisdiction and date/time at which each DACS-wrapped
               service request is processed. The cookie is emitted regardless of whether access
               was granted, although some error conditions may prevent a cookie from being sent.
               No cookie is set for an effectively unauthenticated request.

               The name of the activity tracking cookie has the following format:

                   DACS:federation-name::::ACTIVITY

               where federation-name is the official name assigned to the federation for which
               the cookie is valid (FEDERATION_NAME[57]). Activity tracking may be enabled
               without enabling inactivity detection (via ACS_INACTIVITY_LIMIT_SECS[56]). This
               feature depends on an appropriate level of clock synchronization at all
               participating jurisdictions.

           ADMIN_IDENTITY (Optional)
               This repeatable directive specifies a DACS identity (group names are currently not
               allowed) that DACS grants special privileges. If omitted, the current federation
               and jurisdiction[55] are implied. The usernames "unauth" and "unauthenticated" are
               disallowed, whether qualified with a jurisdiction or not. The function
               dacs_admin()[38] tests whether the user making a service request has any
               credentials that match any ADMIN_IDENTITY. This enables boilerplate access control
               rules to be written that need to restrict access to an administrator - the rules
               need only invoke dacs_admin(). Changes to the list of DACS administrators take
               effect immediately. Comparison of these identities with credentials is controlled
               by the NAME_COMPARE[58] directive.

               Some DACS services call an internal version of this function to ensure certain
               operations are limited to a DACS administrator.

                   Security
                   Consider requiring more secure authentication for administrator identities,
                   such as using a two-factor authentication method or combining two different
                   authentication methods.

           ALLOW_HTTP_COOKIE (Optional1)
               If "yes", DACS components will allow the environment variable HTTP_COOKIE to be
               used to pass DACS credentials. This is currently necessary when DACS components
               are invoked through IIS (except in conjunction with DACS proxied operation). On
               secure systems, this method of passing credentials may be acceptable, but in
               general it is not secure and must not be allowed because environment variables are
               essentially public on some systems. If undefined or not "yes", DACS components
               will fail if HTTP_COOKIE is present.

           AUTH_AGENT_ALLOW_ADMIN_IDENTITY (Optional1)
               Unless this directive has the value "yes", dacs_auth_agent will not return
               credentials that have been designated as an ADMIN_IDENTITY.

           AUTH_CREDENTIALS_ADMIN_LIFETIME_SECS (Optional1)
               The lifetime, in seconds, of all credentials created by this jurisdiction for
               internal use. These credentials are used in certain internal transactions, such as
               when dacs_authenticate sends an HTTP request to an authentication or roles module.
               Although they are only supposed to be held by trusted components, because these
               credentials can convey special privileges their lifetime should not be much longer
               than required. It is sometimes necessary to increase this lifetime when debugging
               or if a recipient server is slow.

           AUTH_CREDENTIALS_DEFAULT_LIFETIME_SECS (Required1)
               The default lifetime, in seconds, of all credentials created by this jurisdiction
               for users. The jurisdiction's authentication services may override this value on a
               case-by-case basis, either through an authentication module (see
               auth_reply.dtd[59]) or by setting ${Auth::CREDENTIALS_LIFETIME_SECS} (see
               dacs_authenticate(8)[52]).

                   Security
                   The lifetime should be chosen such that it strikes a balance between security
                   and user convenience that is appropriate for the jurisdiction and federation.

           AUTH_ERROR_HANDLER (Stack)
               If dacs_authenticate(8)[52] is not able to successfully authenticate a user, the
               resulting action can be customized in ways that depend on the reason for the
               failure. This provides a way for the system administrator to display a custom
               error message or redirect the user's browser.

                   Note
                   This feature is activated only if dacs_authenticate is passed an
                   ENABLE_AUTH_HANDLERS parameter that has a value of 1.
               The following error code numbers and corresponding descriptive text are defined:

                   800 Authentication failed, invalid authenticating information
                   801 Authentication failed, invalid argument
                   802 Authentication failed, internal error
                   899 Authentication failed, reason unknown

               When this type of response is returned, a program needs to only examine the three
               digit code to determine why access was denied. No blanks may precede the code, any
               number of blanks may follow it. The descriptive-text consists only of printable
               characters (e.g., no tabs or newlines) and may not contain a colon. The
               descriptive-text is subject to change, but the meaning of the code number is
               fixed. Optionally, the standard text may be followed by a single space, a colon,
               at least one space, and a more detailed error message.

               The dacs_authenticate service recognizes a FORMAT argument that is used to select
               between an XML-aware user agent (FORMAT=XML) and an HTML capable user agent
               (FORMAT is not specified or is not XML). In the case of an XML result,
               dacs_auth_reply.dtd[60] is used. The behaviour of this directive with respect to
               FORMAT is described below on a case-by-case basis.

               The following directives are supported:

                1. AUTH_ERROR_HANDLER "AUTH-error-code reason"

                   DACS will return an HTML (or XML, if FORMAT=XML) document that describes why
                   authentication failed, such as the following:

                       800 Authentication failed, invalid authenticating information

                   This is the default behaviour.

                2. AUTH_ERROR_HANDLER "AUTH-error-code [url] URL"

                   This form causes DACS to redirect the client to the specified URL, which may
                   be a relative or absolute URL. If the keyword url is absent, URL must begin
                   with the four characters http. The GET method will be used. The URL may
                   contain a properly escaped query string; DACS will append the following
                   parameters, in the order given, to the URL:

                    1. DACS_ERROR_CODE, the AUTH-error-code that identifies the failure.

                    2. DACS_VERSION, the version number of DACS (e.g., "1.4").

                    3. DACS_FEDERATION, the federation that received the service request, if
                       available.

                    4. DACS_JURISDICTION The jurisdiction that received the service request, if
                       available.

                    5. FORMAT, the value of this parameter will be either HTML or XML, as
                       determined by the value of the parameter of the same name passed to
                       dacs_authenticate or the default (HTML if FORMAT was not specified).

                   The values of these parameters are URL encoded.

                3. AUTH_ERROR_HANDLER "AUTH-error-code [file] full-pathname"

                   This form causes the contents of the file named by full-pathname to be
                   returned without regard to the presence of a FORMAT argument.

                       Note
                       The file must include any header lines it requires, such as a Content-Type
                       line, a header-terminating blank line, and then the document content. Note
                       also that the "full-pathname" usage differs from the "local-URL" usage of
                       the ACS_ERROR_HANDLER directive, though both elements begin with a slash
                       character; the former specifies the absolute pathname of a file, while the
                       latter specifies a URL local to the receiving web server.

                4. AUTH_ERROR_HANDLER "AUTH-error-code [message] \"message\""

                   This form causes the given message, surrounded by escaped double quote
                   characters, to be returned as HTML (or XML if FORMAT=XML).

               The optional keywords are treated case-insensitively.

               The AUTH-error-code is either a defined authentication error code (listed above)
               or the special symbol "*", which means the directive applies to any authentication
               error code for which there is no explicit directive.

               This directive may appear multiple times, although multiple directives for the
               same AUTH-error-code are not allowed. Any invalid directive will generally be
               treated as a fatal error. A directive with a syntactically valid but undefined
               AUTH-error-code is ignored, however.

           AUTH_FAIL (Optional1)
               If dacs_authenticate fails to authenticates a user, the given expression is
               evaluated just before the AUTH_ERROR_HANDLER[61] directive, if any, is processed.
               This directive provides a hook for post-authentication actions to be performed.
               The namespaces in effect during authentication processing are accessible to the
               expression. The value of the expression is discarded and any errors are ignored.
               Note that since authentication failed, only the user's purported identity may be
               available (${Args::USERNAME}), or if the user was previously authenticated
               successfully, as ${Env::REMOTE_USER}.

           AUTH_FAIL_DELAY_SECS (Optional1)
               If assigned a positive integer value, a particular user (ordinarily the one
               identified by the USERNAME argument to dacs_authenticate) will not be allowed to
               reauthenticate following a failed attempt within this many seconds. If assigned
               the value of zero seconds, this feature is disabled. If this directive is absent
               or assigned an illegal value, a compile-time value is used instead. Authentication
               modules may indirectly impose their own delays following unsuccessful
               authentication; this is system dependent and not under the control of DACS.

           AUTH_SINGLE_COOKIE (Optional1)
               By default, each set of credentials that is returned in an HTTP cookie is assigned
               a cookie name[62] that corresponds to the identity represented by the credentials.
               If a user authenticates as two different identities through dacs_authenticate, for
               example, he will be given two cookies with different names. Because in some
               situations multiple credentials can be problematic, this directive provides a way
               to effectively limit a request to a single set of credentials by using one cookie
               name for all credentials. When an already-authenticated user authenticates again,
               either at the same jurisdiction or any jurisdiction, the user's browser will
               replace the previous cookie with the new one.

               This directive also controls cookie names associated with credentials generated by
               dacscookie(1)[31], dacs_auth_agent(8)[63], and dacs_auth_transfer(8)[29]. Also see
               ACS_CREDENTIALS_LIMIT[64].

               By setting AUTH_SINGLE_COOKIE to "jurisdiction" (case insensitive), the username
               component of an authentication cookie issued by the jurisdiction is suppressed.
               This means that every authentication cookie it creates will have the same name. By
               setting it to "federation" (case insensitive), the jurisdiction and username
               components of an authentication cookie issued by the jurisdiction are suppressed.
               This means that every authentication cookie that it creates will have the same
               name, but also that any two jurisdictions that use this configuration will create
               cookies with the same name. Any other value results in the default behaviour,
               which is to include both the jurisdiction name and the username in the names of
               authentication cookies. The directive has no effect on the name of the identity
               encapsulated within an HTTP cookie.

               If an authentication cookie is received that was created by the jurisdiction and
               has a cookie name with a component that it has been configured to suppress, the
               cookie is ignored. A cookie issued by a different jurisdiction with a suppressed
               cookie name component is acceptable regardless of how this directive is configured
               at this jurisdiction.  DACS will reject all credentials if a request includes more
               than one cookie with the same cookie name.

               In typical use, each jurisdiction that performs authentication will configure this
               directive identically. To limit each user to associating a single identity with
               their request, simply set AUTH_SINGLE_COOKIE to "federation" at each jurisdiction
               in the federation.

                   Security
                   This directive indirectly limits the number of credentials that can be
                   associated with a single request. It does not prevent the same individual from
                   sending different requests, from the same browser or different browsers, each
                   associated with a different identity. Also, it does not limit the number of
                   concurrent logins of the same identity (such as by different individuals
                   sharing the same account).

                   Changing this directive's value may render existing credentials invalid at
                   this jurisdiction. For example, after changing the directive it is possible
                   for a user to obtain two authentication cookies with different names for the
                   same identity.  DACS does not allow a request to include multiple credentials
                   for the same identity.

           AUTH_SUCCESS (Optional)
               If dacs_authenticate successfully authenticates a user, the given expression is
               evaluated just before the AUTH_SUCCESS_HANDLER[65] directive, if any, is
               processed. This directive provides a hook for post-authentication actions to be
               performed, which can be user-specific. The namespaces in effect during
               authentication processing are accessible to the expression. The value of the
               expression is discarded and any errors are ignored.

               Also see the on_success()[53] function.

               As an example, the following directive will run a web service after every
               successful login:

                   AUTH_SUCCESS 'https://internal.example.com/cgi-bin/userlogin?USERNAME=${Auth::IDENTITY}'

           AUTH_SUCCESS_HANDLER (Optional1)
               If dacs_authenticate successfully authenticates a user, the resulting action can
               be customized. This provides a way for the DACS administrator to redirect a user's
               browser after login.

                   Note
                   This feature is enabled only if dacs_authenticate is passed an
                   ENABLE_AUTH_HANDLERS parameter that has a value of 1.
               The dacs_authenticate service recognizes a FORMAT argument that is used to select
               between an XML-aware user agent (FORMAT=XML) and an HTML capable user agent
               (FORMAT is not specified or is not XML). In the case of an XML result,
               dacs_auth_reply.dtd[60] is used. The behaviour of this directive with respect to
               FORMAT is described below on a case-by-case basis.

               The following syntaxes are supported:

                1. AUTH_SUCCESS_HANDLER "[url] URL"

                   This form causes DACS to redirect the client to URL, which may be a relative
                   or absolute URL. If the keyword url is absent, URL must begin with the four
                   characters http. The GET method will be used. The URL may contain a properly
                   escaped query string; DACS will append the following parameters, in the order
                   given, to the URL:

                   DACS_VERSION
                       The version number of DACS (e.g., "1.4").

                   DACS_FEDERATION
                       The federation that received the service request, if available.

                   DACS_JURISDICTION
                       The jurisdiction that received the service request, if available.

                   DACS_USERNAME
                       The username associated with the new credentials.

                   FORMAT
                       The value of this parameter will be either HTML or XML, as determined by
                       the value of the parameter of the same name passed to dacs_authenticate or
                       the default (HTML if FORMAT was not specified).

                   The values of these parameters are URL encoded.

                2. AUTH_SUCCESS_HANDLER "[file] full-pathname"

                   This form causes the contents of the file named by full-pathname to be
                   returned without regard to the presence of a FORMAT argument. The file must
                   include any header lines it requires, such as a Content-Type line, a
                   header-terminating blank line, and then the document content.

                       Note
                       The "full-pathname" usage differs from the "local-URL" usage of the
                       ACS_ERROR_HANDLER directive, though both elements begin with a slash
                       character; the former specifies the absolute pathname of a file, while the
                       latter specifies a URL local to the receiving web server. To specify a
                       relative URL, use the url keyword.

                3. AUTH_SUCCESS_HANDLER "[message] \"message\""

                   This form causes the given message, surrounded by escaped double quote
                   characters, to be returned as HTML (or XML if FORMAT=XML).

                4. AUTH_SUCCESS_HANDLER "credentials"

                   This form causes the user's credentials to be displayed, either as an HTML or
                   XML (if FORMAT=XML) document. This is the default behaviour.

               The optional keywords are treated case-insensitively.

           AUTH_TRANSFER_EXPORT (Optional)
               Each use of this directive identifies a target federation and the corresponding
               URL of a program to invoke the TOKEN operation phase of the protocol in that
               federation. The federation identifier is simply a label (case-sensitive) that must
               be a syntactically valid federation name. Whitespace separates the federation name
               from the URL. Please refer to dacs_auth_transfer(8)[29] for details.

           AUTH_TRANSFER_TOKEN_LIFETIME_SECS (Optional1)
               This is the lifetime, in seconds, of a token produced by the TOKEN operation of
               dacs_auth_transfer(8)[29] and consumed by its IMPORT operation. That is, it is the
               time a user (or middleware) has to submit the token before it becomes invalid. It
               should be on the order of a few seconds.

           COMPAT_MODE (Optional1)
               This indicates that, to the extent possible, credentials issued by a different
               release of DACS should be accepted. At present, the only supported values are off
               (the default, which disables this mode) and 1.2.

                   Important
                   This directive is not intended to provide complete interoperability among DACS
                   releases and in fact it does not in certain situations. Old releases of DACS
                   may contain security-related bugs, or may rely on third-party software that
                   contains security-related bugs.  DACS installations are urged to upgrade
                   rather than to depend on the limited backward compatibility supplied by this
                   directive.  There is no guarantee that any particular level of backward
                   compatibility will be carried forward in subsequent releases of DACS.

           COOKIE_HTTPONLY (Optional1)
               If "yes", the HttpOnly attribute will be included with cookies produced by DACS.
               This attribute is a Microsoft extension that is used to "mitigate the risk of
               information disclosure with a cross-site scripting (XSS) attack[66]". This
               attribute is not recognized by all browsers but these browsers should ignore it.
               The default is "no".

                   Security
                   Methods of defeating this attribute are known[67], so administrators may need
                   to take additional precautions against XSS attacks.

           COOKIE_NAME_TERMINATORS (Optional1)
               By default, DACS creates HTTP cookies with names having a particular syntax[68],
               using colon characters to separate components of the cookie's name: application
               name ("DACS"), federation name, jurisdiction name, and username. The strings that
               are used by default to terminate the first three components of the cookie name can
               be changed using this directive. If the directive's value is:

               •   a single character, each occurrence of a colon in the default terminators is
                   replaced by the character;

               •   a string that does not contain a comma, each occurrence of a colon in the
                   default terminators is replaced by the string; or

               •   a string that contains four commas, each terminator in the default format is
                   replaced by the corresponding component in COOKIE_NAME_TERMINATORS.

               Any other directive value is rejected. It is not possible to escape a comma in the
               directive value. No terminator may be the null string. This directive is honoured
               in all contexts where DACS produces or parses an HTTP cookie name, such as by
               dacscookie(1)[31]. See COOKIE_SYNTAX[69] for additional information.

                   Important
                   No other validity checks are performed, so it is possible to configure a
                   cookie name syntax that is non-conformant, unacceptable to DACS, or
                   unacceptable to some clients. Changing the cookie name format will cause
                   previously issued cookies to not be recognized by DACS until the format is
                   switched back. Since the value of the directive can be determined at run-time,
                   however, considerable flexibility is possible. Jurisdictions will not
                   recognize each other's HTTP cookies if they produce cookies with differently
                   formatted names. Changing the cookie name format does not affect the similar
                   syntax used to specify jurisdictions, users, and so on.
               Consider this directive:

                   COOKIE_NAME_TERMINATORS "~"

               This will result in cookie names that look like:

                   DACS~federation-name~~[jurisdiction-name]~[username][~special]

               Here is another example:

                   COOKIE_NAME_TERMINATORS "~,::,~,:"

               This will result in cookie names that look like:

                   DACS~federation-name::[jurisdiction-name]~[username][:special]

           COOKIE_NO_DOMAIN (Optional1)
               If "yes", no domain attribute will appear when DACS returns a cookie, such as
               after authenticating successfully from a browser. The browser will take the
               default action, which is to associate the cookie with the domain name or IP
               address of the request that returned the cookie. This will obviously limit DACS's
               single sign-on feature since the cookie (credentials) will only be sent with
               requests made to that domain name or IP address.

               This directive is sometimes useful when DACS is deployed in an environment where
               fully qualified domain names are not used. In this case, FEDERATION_DOMAIN must
               still be configured, although it will not be used in conjunction with the domain
               of cookies.

               The default is "no".

           COOKIE_PATH (Optional1)
               This allows the path component of a Set-Cookie (and Set-Cookie2) HTTP response
               header to be specified for the jurisdiction. These headers are sent to a user
               agent after successful authentication or signout. Refer to the Netscape HTTP
               Cookies Specification[70], RFC 2965[71], and RFC 6265[72] for details.

                   Security
                   The default value is "/", which means that the cookie will be sent by a user
                   agent along with every request sent to the jurisdiction's host. The value
                   should be set to the most specific URL path under which all DACS-wrapped
                   services appear so that DACS credentials will only be sent with requests to
                   those URLs. It is critical to do this if your server runs arbitrary user CGI
                   programs because a malicious user might be able to cause a DACS-authenticated
                   user to visit a service that is not DACS-wrapped and capture cookies that
                   represent DACS identities. For example, if a jurisdiction segregated its
                   DACS-wrapped static content under /dacs/content and its DACS-wrapped CGI
                   programs under /dacs/cgi-bin, then COOKIE_PATH should have the value "/dacs".

           CSS_PATH (Optional1)
               This path is used as the value of the href attribute of the HTML link element used
               to specify the root location of style files used by HTML-producing DACS web
               services and utilities. The mapping between this path and a local directory, if
               any, depends on Apache's configuration; for example, if its value is "/css", the
               location of the corresponding directory will depend on the location of the
               server's document root and any applicable Alias directive.

               If this directive is not used, a compile-time default of "/css" is used, which
               assumes that an Apache directive like this one is used:

                   Alias /css "/usr/local/dacs/www/css/"

               Please refer to dacs.install(7)[73] for additional information about use of the
               Alias directive.

           DTD_BASE_URL (Optional1)
               When DACS services are asked to send an XML response (FORMAT=XML) and DTD_BASE_URL
               is configured, services will emit a DOCTYPE with the keyword SYSTEM followed by a
               value derived from DTD_BASE_URL; e.g.,

                   <!DOCTYPE foo SYSTEM "http://example.com/dacs/dtd-xsd/foo.dtd">

               If DTD_BASE_URL is not configured, an internal DTD will be emitted. Also see the
               description of the FORMAT web service argument[74].

           EVAL (Optional)
               The EVAL directive is special in that it may appear in any clause and because it
               is always evaluated when it is first seen during processing of site.conf, the
               Default section of dacs.conf, or the applicable Jurisdiction section of dacs.conf
               (i.e., before any section merging occurs). The purpose of the directive is purely
               for its side effect, such as initializing a configuration variable (see Advanced
               Techniques[75]). Because these directives are scanned early during configuration
               processing, their right-hand sides cannot reference directives as configuration
               variables because those directives have not yet been evaluated (so they cannot
               reference ${Conf::FEDERATION_DOMAIN}, for example). Example:

                   EVAL ${Conf::a_special_path} = "/my/path"

           FEDERATION_DOMAIN (Required1)
               The suffix of the domain name (RFC 1035[76] 2.3.1) that is common to all
               jurisdictions in the federation. Note that the domain name associated with a
               jurisdiction is not explicitly configured (but see dacs_url in
               dacs.groups(5)[77]), and that this is a one-to-many association (see
               dacs.conf(5)[78]). Example: example.com

           FEDERATION_NAME (Required1)
               The name for the federation of jurisdictions. The syntax is the same as for
               JURISDICTION_NAME[79]: an alphabetic followed by zero or more alphanumeric
               characters, '-', or '_'. By convention, this is in all-caps, however. Please see
               dacs(1)[80] for additional information. Example: FEDROOT

           HTTP_AUTH (Stack)
               This directive is used to perform user authentication at access control time
               rather than in a separate sign-on step. This mode of authentication is triggered
               through DACS's internal implementation of HTTP Basic or Digest authentication (see
               RFC 2617[81]). If prompting is enabled, the user will be asked for his username
               and password by the user agent's usual prompting method. If prompting is disabled,
               the user agent must know how to send an Authorization request header without first
               receiving a WWW-Authenticate response header. The username and password obtained
               from the user can be directed to any suitable DACS authentication method for
               validation. By default, the resulting identity is associated with the current
               jurisdiction[48].

               Other than by placing the resource or resources specified by this directive under
               the control of DACS, no additional Apache configuration needs to be done to use
               this feature.

               Please refer to the section on HTTP Authentication[82] for additional information
               about this feature and how it is used. Also refer to the HTTP_AUTH_ENABLE[83]
               directive.

               Two different mechanisms are available: pre-authorization testing and
               post-authorization testing. The HTTP_AUTH_ENABLE directive is used to enable one
               or both mechanisms.

               The pre-authorization testing mechanism is used if:

                1. a request is received that does not include valid credentials;

                2. the feature is enabled by HTTP_AUTH_ENABLE (i.e., it is set to "pre_acs_only"
                   or "both") and not disabled by ACS_AUTHENTICATED_ONLY[49];

                3. no ACS_PRE_AUTH[84] directive is successful;

                4. the applicable directive includes the -pre flag (see below[85]); and

                5. either the request includes an Authorization request header or the return of
                   an HTTP WWW-Authenticate response header is enabled.

               This mechanism can be useful with simple user agents that understand Basic
               authentication but cannot handle redirection or sometimes even the
               WWW-Authenticate response header. It may also be appropriate in situations where a
               user agent cannot or will not handle HTTP cookies. If dacs_acs is allowed to
               respond with a WWW-Authenticate response header, the configuration variable
               ${Conf::http_auth_401} must be set to "yes".

               The post-authorization testing mechanism is used if:

                1. a request is denied because the user was not authenticated;

                2. the feature is enabled by HTTP_AUTH_ENABLE (i.e., it is set to "post_acs_only"
                   or "both") and not disabled by ACS_AUTHENTICATED_ONLY;

                3. the applicable directive does not include a -pre flag (see below).

               One important difference between the two mechanisms is that while the
               post-authorization mechanism works by redirecting the user to
               dacs_authenticate(8)[52] after authorization checking denies a request, the
               pre-authorization mechanism does not involve any redirection and dacs_authenticate
               is not used. Instead, dacs_acs performs authentication internally (by calling
               dacsauth as a function) and credentials are not returned to the client;
               credentials are created that (normally) exist only for the duration of the
               authorization check, which means that no DACS session state exists outside of
               dacs_acs and therefore some DACS web services will either be unavailable or not
               operate in the same way they would if credentials were provided by the client.
               Pre-authorization may also be less efficient than returning credentials because
               authentication will be performed each and every time the client makes a request
               that triggers it. Note that only authentication modules that implement the
               password or expr authentication styles[86] can be used by this mechanism, and only
               if no redirection of the client is necessary. Because web browsers only prompt for
               a username and password, if an AUXILIARY argument is also required it must be
               entered with either the username or password (i.e., combined in some way, perhaps
               separated by punctuation) and then parsed into an AUXILIARY argument using a
               run-time configuration directive. With pre-authorization, roles can be assigned to
               the temporary credentials (refer to the description of the -r flag and the
               role-module-spec in dacsauth(1)[32] for details).

                   Security
                   Like dacsauth and dacs_authenticate, if dacs_acs uses a built-in module to
                   perform authentication, it must run setuid or setgid (chmod(2)[87]). to obtain
                   sufficient privileges to access the required files; this is true for Unix
                   password authentication, for example. Programs should run at the lowest level
                   of authorization that is necessary, however, and it is generally preferable to
                   only run authentication modules at a higher authorization level.

               The value of the HTTP_AUTH directive follows any one of the following three forms:

                1.

                       auth_scheme auth_realm url_pattern+

                2.

                       auth_scheme auth_realm url_pattern+ -pre [[-param] param-string]
                           {-m auth-module-spec [auth-flag]*}+ {-r roles-module-spec}*

                3.

                       except url_pattern+

               The first syntactical form is for the post-authentication mechanism:

               •   auth_scheme is the (case-insensitive) authentication scheme to use (e.g.,
                   Basic);

               •   auth_realm is the (case-sensitive) realm-value string associated with the
                   resource (see RFC 2617[81]);

               •   url_pattern+ is a list of one or more URI path components that are matched
                   against the request for which access was denied to an unauthenticated user.
                   Each of these components is like the url_pattern attribute used in access
                   control rules[37] in that it can either specify an exact match or, by ending
                   in "/*", a wildcard match; no query argument component is allowed. Each
                   url_pattern begins with a / character.

               The second syntactical form is for the pre-authentication mechanism. Its first
               three components are like those for the first form, and must appear in the order
               specified above. The following components are then added, and may follow the three
               initial components in any order:

               •   -pre selects the pre-authorization testing mechanism; the default is to use
                   post-authorization testing. Because each url_pattern begins with a /
                   character, the -pre flag implicitly ends the url_pattern list.

               •   param-string is an optional string consisting of authentication parameters as
                   per RFC 2617 (note: HTTP Basic authentication does not permit any optional
                   parameters). For clarity, or if param-string might be confused with another
                   syntactic element, it can be preceded by a -param flag. In the absence of the
                   -param flag, any non-flag argument is assumed to be the param-string. Only one
                   param-string is allowed.

               •   -m auth-module-spec specifies an authentication module using the command-line
                   syntax of dacsauth(1)[32]. This argument must occur at least once. Following
                   the auth-module-spec can be zero or more auth-flag arguments to apply to the
                   module's authentication context. The -Ddirective=value flag, -fj jurname flag,
                   and the -fn fedname flag are recognized and have the same semantics as when
                   used by dacsauth(1)[32].

               •   -r roles-module_spec specifies a roles module. This argument may occur zero or
                   more times.

               In the third syntactical form, the except keyword identifies portions of the URL
               space that should not trigger HTTP authentication.

               The HTTP_AUTH directives "stack", like the ACS_ERROR_HANDLER[18] directive.  DACS
               will search for the first exact url_pattern that matches or will select the
               closest wildcard url_pattern. Two or more directives with the same url_pattern
               should not be configured.

               The first of the two directives in the following example may trigger Basic
               authentication for the realm called "Info Realm" when either
               /cgi-bin/dacs/dacs_prenv or /cgi-bin/dacs/dacs_version (relative to the current
               jurisdiction[48]) is requested. The second directive may trigger Basic
               authentication for the realm called "CGI Realm" for any other resource subordinate
               to /cgi-bin/dacs. The first directive will override the second because an exact
               match overrides a wildcard match.

                   HTTP_AUTH "basic \"Info Realm\" /cgi-bin/dacs/dacs_prenv /cgi-bin/dacs/dacs_version"
                   HTTP_AUTH "basic \"CGI Realm\"   /cgi-bin/dacs/*"

               In the next example, the two directives associate the Basic authentication scheme
               with everything under /cgi-bin/dacs/, except for /cgi-bin/dacs/dacs_prenv (because
               the second directive is an exact match, which overrides the first directive):

                     HTTP_AUTH "basic \"CGI Realm\" /cgi-bin/dacs/*"
                     HTTP_AUTH "except /cgi-bin/dacs/dacs_prenv"

                   Tip
                   An administrator can take advantage of DACS's active configuration processing
                   to decide at run-time which auth_scheme, auth_realm, or password file to use,
                   for instance, perhaps depending on the request's arguments.
               As an example of pre-authorization testing authentication, consider the following
               configuration directives:

                   HTTP_AUTH_ENABLE "pre_acs_only"
                   EVAL ${Conf::http_auth_401} = "no"
                   HTTP_AUTH "basic \"dacs_prenv Realm\" /cgi-bin/dacs/dacs_prenv -m unix passwd suff"

               The first directive above enables this feature. The second directive disables
               responding with a WWW-Authenticate header; changing its value to "yes" enables the
               response. The third directive associates the DACS dacs_prenv(8)[88] service with
               the built-in Basic authentication feature at pre-authorization testing time. Given
               this configuration, if a client requests dacs_prenv but does not include
               credentials:

               •   if no Authorization header was sent and ${Conf::http_auth_401} is "no", then
                   execution will proceed as if the feature were disabled (i.e., the user will be
                   unauthenticated)

               •   if no Authorization header was sent and ${Conf::http_auth_401} is "yes", then
                   DACS will respond with a WWW-Authenticate response header and 401 status code

               •   if an Authorization header was sent, the username and password will be
                   validated using the built-in Unix authentication module:

                   •   if authentication succeeds, temporary credentials will be created and used
                       for the request, but will not be returned to the client

                   •   if authentication fails, access will be denied

                   Tip
                   You can create an Authorization header by constructing a string consisting of
                   an account name, a colon, and the account's password. MIME encode the
                   resulting string - you can use dacsexpr(1)[89] and the encode()[90] function:

                       % dacsexpr
                       > encode(mime, "guest:apassword")
                       "Z3Vlc3Q6YXBhc3N3b3Jk"

                   The header for the example above would look like:

                       Authorization: Basic Z3Vlc3Q6YXBhc3N3b3Jk

                   And using dacshttp(1)[4], you could use the flag:

                       -header Authorization "Basic Z3Vlc3Q6YXBhc3N3b3Jk"
               The example that follows shows how LDAP authentication[91] using the direct method
               might be configured. In an appropriate place in dacs.conf, we might insert these
               directives:

                   HTTP_AUTH_ENABLE "pre_acs_only"
                   HTTP_AUTH "basic \"LDAP Login Using Your Common Name\" /basic/* -pre \
                       -m https://example.example.com/cgi-bin/dacs/local_ldap_authenticate \
                       password sufficient -Of /usr/local/dacs/ldap/ldap_auth_options_direct"

               In the file /usr/local/dacs/ldap/ldap_auth_options_direct (which must be readable
               at run-time by dacs_acs(8)[6]), we might put:

                   LDAP_BIND_METHOD=direct
                   LDAP_USERNAME_URL*="ldap://windex.example.com/CN=" . encode(url,${Args::USERNAME}) . ",CN=Users,DC=example,DC=com"
                   LDAP_USERNAME_EXPR*="${LDAP::sAMAccountName}"

               Note the use of the LDAP_USERNAME_EXPR* directive. Because authentication against
               the directory uses a Common Name attribute in the example, and a Common Name may
               not be a valid DACS username, it must be replaced by (or mapped to) an acceptable
               DACS username. The first time a user attempts to access a resource that matches
               the URL pattern /basic/*, he will prompted by his web browser for a username (in
               this case, a Common Name must be provided) and password. The directory on
               windex.example.com will be used by the local_ldap_authenticate module to validate
               the information provided by the user.

               To also obtain the user's roles from the directory, the set_roles style modifier
               and an LDAP_ROLES_SELECTOR* directive can be added to the configuration:

                   HTTP_AUTH_ENABLE "pre_acs_only"
                   HTTP_AUTH "basic \"LDAP Login Using Your Common Name\" /basic/* -pre \
                       -m https://example.example.com/cgi-bin/dacs/local_ldap_authenticate \
                       password,set_roles sufficient -Of /usr/local/dacs/ldap/ldap_auth_options_direct"

               And to /usr/local/dacs/ldap/ldap_auth_options_direct:

                   LDAP_BIND_METHOD=direct
                   LDAP_USERNAME_URL*="ldap://windex.example.com/CN=" . encode(url,${Args::USERNAME}) . ",CN=Users,DC=example,DC=com"
                   LDAP_ROLES_SELECTOR*="${LDAP::attrname}" eq "memberOf" ? strtr(ldap(rdn_attrvalu
                   e, ldap(dn_index, "${LDAP::attrvalue}", 1)), " ", "_") : ""
                   LDAP_USERNAME_EXPR*="${LDAP::sAMAccountName}"

                   Tip
                   Since the pre-authorization mechanism does not return DACS credentials to the
                   user's web browser, a subsequent invocation of dacs_current_credentials(8)[92]
                   will not display information that resulted from the authentication procedure.
                   If the URL that triggers pre-authorization is for a script or other program
                   that is executable by Apache with access permitted by DACS, however, the
                   program can display its environment, which will include DACS_USERNAME,
                   DACS_ROLES, and so on. For example, dacs_prenv(8)[88] can be used for this, as
                   can this simple PHP script (phpinfo.php):

                       <html><head></head><body>
                       <p>
                       <?php
                       phpinfo();
                       ?>
                       </p>
                       </body>
                       </html>
               To authenticate against a Unix account and assign the user's group membership as
               roles, this configuration might be used:

                   HTTP_AUTH_ENABLE "pre_acs_only"
                   HTTP_AUTH "basic \"Login Using Your Unix Account\" /basic/* -pre \
                       -m https://example.example.com/cgi-bin/dacs/local_unix_authenticate \
                       password sufficient -Of /usr/local/dacs/ldap/ldap_auth_options_direct \
                       -r https://example.example.com/cgi-bin/dacs/local_unix_roles"

               Note that local_unix_authenticate must run with sufficient privileges to validate
               the username/password pair.

           HTTP_AUTH_ENABLE (Optional1)
               This directive's value must be one of:

               •   "post_acs_only", if only post-authorization testing HTTP Authentication[82]
                   may be used,

               •   "pre_acs_only", if only pre-authorization testing HTTP authentication may be
                   used, or

               •   "yes" or "both" if either mechanism may be used.

               Refer to HTTP_AUTH[46] for additional details.

           HTTP_PROG (Required1)
               The full pathname of the executable dacshttp(1)[4] program, a utility distributed
               with DACS. This program is used by DACS components to invoke local services,
               optionally using SSL/TLS.

           INFOCARD_AUDIENCE (Optional)
               This directive must be configured for DACS to function as a Relying Party. When
               DACS acts as a Relying Party, each of these directives is applied to the value of
               an Audience element (a URI) in a secure token's AudienceRestrictionCondition
               element until a successful match is found. Several matching functions are
               available using the following syntax:

                   function [space+ arg-to-match-against-Audience]

               function is case insensitive.

               uri match-URI
                   The match-URI is compared with the entire Audience URI for an exact URI match.
                   URI matching syntax is used, meaning that only the scheme and hostname
                   components are case insensitive.

                       INFOCARD_AUDIENCE "uri http://DACS.DSS.CA/infocard-demo"

               any
                   Any Audience is acceptable.

                       INFOCARD_AUDIENCE "any"

               regex match-regex
               regex/flags match-regex
                   In the first form, the regular expression match-regex is matched (unanchored)
                   against the Audience URI. In the second form, one or more flags can precede
                   the regular expression: 'i' specifies case-insensitive matching and 'e'
                   specifies "extended" regular expressions rather than the default "basic"
                   regular expressions. IEEE Std 1003.2 ("POSIX.2") regular expressions are
                   supported (regex(3)[93]).

                       INFOCARD_AUDIENCE "regex/i ^https://dacs.dss.ca:8443"

                   The following directives are equivalent:

                       INFOCARD_AUDIENCE "regex .*"
                       INFOCARD_AUDIENCE "any"

               host match-hostname
                   The match-hostname, which may be a domain name or an IP address, is matched
                   case-insensitively against the host name in the Audience URI.

                       INFOCARD_AUDIENCE "host dacs.dss.ca"

               prefix match-URI
                   The match-URI is matched against the Audience URI to test if the former is a
                   prefix of the latter. The case-sensitivity rules for URI components is
                   respected (e.g., the scheme and host name components are treated
                   case-insensitively, but the path components are not).

                       INFOCARD_AUDIENCE "prefix https://dacs.dss.ca/infocards"

           INFOCARD_AUDIENCE_RESTRICTION (Optional)
               Used by dacs_sts(8)[94], this optional directive specifies the value of an
               Audience element in an AudienceRestrictionCondition.

           INFOCARD_CARD_DATETIME_EXPIRES (Optional1)
               This optional directive specifies the date and time of expiration for a managed
               InfoCard created by dacs_managed_infocard(8)[95]. The XML Schema dateTime format
               must be used (see XML Schema Part 2: Datatypes Second Edition[96]); e.g.,

                   INFOCARD_CARD_DATETIME_EXPIRES "2010-06-15T09:46:31-08:00"

               Also see INFOCARD_CARD_LIFETIME_SECS[97].

           INFOCARD_CARD_DEFS_URL (Optional1)
               This optional directive is used by dacs_managed_infocard(8)[95] to specify a web
               service that defines the claims supported by a new managed InfoCard. If it is not
               defined, the default claim dacs_identity is used. To prevent abuse, arbitrary
               compile-time limits are imposed on the number of claims (20) and the lengths of
               various claim components: name (32 bytes), value (64 bytes), URI prefix (128
               bytes), label (20 bytes), and description (40 bytes). (These limits should be
               run-time configurable.) The distribution's infocard directory includes an example
               program, demo_card_defs.php, which documents the program's arguments and output
               syntax.

           INFOCARD_CARD_FILL_URL (Optional1)
               This optional directive is used by dacs_sts(8)[94] to specify a web service that
               retrieves the values of claims requested by a Relying Party. If it is not defined,
               only the value of the default claim dacs_identity is available. Access to this web
               service must be appropriately restricted and secured, although it does not need to
               be DACS-wrapped. It is passed special DACS credentials (as an HTTP cookie). The
               distribution's infocard directory includes an example program,
               demo_fill_claims.php, which documents the program's arguments and output syntax.

           INFOCARD_CARD_IMAGE_BASE_URL (Required1-C)
               This directive is required by dacs_managed_infocard(8)[95]. It is the initial part
               of a DACS VFS URI[98] from which image files for managed InfoCards can be
               retrieved. The general idea is that the particular image associated with a card
               depends on the STS authentication credential that is used by the card. For
               example, the configuration variable infocard_card_image_passwd, if set, specifies
               the filename (relative to INFOCARD_CARD_IMAGE_BASE_URL) of an image associated
               with InfoCards that use the username/password type of authentication between its
               owner and the STS; if unspecified, a compile-time default
               (dacs_username_password_credential.png) is used. Similarly, the variables
               infocard_card_image_cert (default value: dacs_x509certificate_credential.png) and
               infocard_card_image_card (default value: dacs_selfissued_credential.png) specify
               filenames for images associated with the X.509 V3 certificate credential type and
               the self-issued InfoCard credential type, respectively. The value of
               INFOCARD_CARD_IMAGE_BASE_URL is typically the absolute pathname of a directory
               containing the image files or the initial part of a URL to which a final path
               component will be appended. Also see the CARD_IMAGE_URL[99] argument to
               dacs_managed_infocard.

               An image should be in the range of 60 pixels wide by 45 pixels high and 200 pixels
               wide by 150 pixels high. Only certain image formats are allowed by the
               specification; the image format is deduced from the filename extension (case
               insensitively): ".png", ".gif", ".tiff" (or ".tif"), ".bmp", and ".jpeg" (or
               ".jpg"). If the format cannot be deduced, PNG is assumed.

           INFOCARD_CARD_LIFETIME_SECS (Optional1)
               If INFOCARD_CARD_DATETIME_EXPIRES is not defined, the expiration date and time of
               a managed InfoCard created by dacs_managed_infocard(8)[95] can be specified
               relative to the current time as this many seconds. If neither this directive nor
               INFOCARD_CARD_DATETIME_EXPIRES is defined, a compile-time default lifetime is used
               (currently, 365 days). Also see INFOCARD_CARD_DATETIME_EXPIRES[100].

           INFOCARD_CARD_OUTPUTDIR (Optional1)
               If a managed InfoCard generated by dacs_managed_infocard(8)[95] is stored in a
               file, it is written to this directory. The name of the file is of the form
               username_random.crd. See INFOCARD_CARDID_BASE_URL[101].

           INFOCARD_CARD_VERSION (Optional1)
               This directive is used by dacs_managed_infocard(8)[95] to provide a value for the
               CardVersion element in a managed InfoCard. The default is "1".

           INFOCARD_CARDID_BASE_URL (Required1-C)
               This directive is required by dacs_managed_infocard(8)[95]. It is used as the base
               URL for the CardId of a new managed InfoCard. If this URL is set so that it points
               into the directory specified by INFOCARD_CARD_OUTPUTDIR[102], then the resulting
               CardId URLs can be used to fetch the card by its owner, assuming appropriate
               access control rules are also configured. Also see INFOCARD_CARDID_SUFFIX[103].

           INFOCARD_CARDID_SUFFIX (Optional1)
               This optional directive is used by dacs_managed_infocard(8)[95] and specifies a
               string to be appended as a final path element to the value of
               INFOCARD_CARDID_BASE_URL[101] to form a new card's CardId. If the value of
               INFOCARD_CARDID_SUFFIX is:

               identity
                   The specified or implied identity assigned to the card is interpolated; this
                   is the default.

               username
                   The specified or implied username assigned to the card is interpolated.

               random
                   A safely-encoded 20-byte random string is interpolated.

               default
                   The default is used ("identity").

               If the value of INFOCARD_CARDID_SUFFIX does not match (case-insensitively) any of
               these strings, it is interpolated verbatim. Regardless of how it was derived, the
               result string must be a syntactically valid URI path segment (RFC 2396[104]).

           INFOCARD_DIGEST (Optional1)
               The name of the hash algorithm to use in account files for self-issued
               InfoCard-based authentication (see dacs_infocard(8)[105]). The syntax is the same
               as for the PASSWORD_DIGEST[106] directive. The default is "SHA256".

           INFOCARD_IP_PRIVACY_URL (Required1-C)
               This directive is required by dacs_managed_infocard(8)[95] and specifies the URL
               of the Identity Provider's PrivacyNotice. A default notice is configured.

           INFOCARD_IP_PRIVACY_VERSION (Optional1)
               This optional directive is used by dacs_managed_infocard(8)[95] and specifies an
               integer version number (greater than zero) of the document returned by the
               INFOCARD_IP_PRIVACY_URL[107]. If it is set to the empty string, however, no
               version number will be specified for the PrivacyNotice. The default is "1".

           INFOCARD_ISSUER_INFO_ENTRY (Optional)
               This optional directive, which may be repeated, is used by
               dacs_managed_infocard(8)[95] to specify arbitrary descriptive information to be
               included in managed InfoCards. This information may be displayed by an Identity
               Selector. The value of the directive is a string of the form
               "EntryName:EntryValue".

           INFOCARD_MEX_URL (Required1-C)
               This directive, used by dacs_managed_infocard(8)[95], specifies the URL of the
               WS-MetadataExchange responder for managed InfoCards. Also see dacs_mex(8)[108].

           INFOCARD_REQUIRE_APPLIES_TO (Optional1)
               Used optionally by dacs_managed_infocard(8)[95], this directive controls a managed
               InfoCard's RequireAppliesTo element, which by default is omitted. This element is
               used to control whether the card's Identity Provider (e.g., dacs_sts(8)[94]) will
               be informed as to the identity of the Relying Party via the wsp:AppliesTo element
               (when it is informed, it is called an auditing card, which is used in auditing
               mode). Following the Identity Selector Interoperability Profile, this directive
               may have any of the following values:

               no
                   The RequireAppliesTo element is omitted (called a non-auditing card).

               yes
                   RequireAppliesTo is emitted, but with its optional attribute omitted (an
                   auditing card).

               true
                   RequireAppliesTo is emitted with the attribute Optional="true" (called an
                   auditing-optional card).

               false
                   RequireAppliesTo is emitted with the attribute Optional="false" (an auditing
                   card).

           INFOCARD_STRONG_RP_IDENTITY (Optional1)
               Used optionally by dacs_managed_infocard(8)[95], if the value of this directive is
               "yes" RequireStrongRecipientIdentity is present in new managed InfoCards, which
               indicates that a Relying Party must use a cryptographically protected identity;
               i.e., an X.509 server certificate.

           INFOCARD_STS_AUTH_TYPE (Required1-C)
               This directive, required by dacs_managed_infocard(8)[95], specifies
               (case-insensitively) the authentication credential type, which identifies an
               Identity Selector user to an IP/STS (see dacs_sts(8)[94]). The value of this
               directive is consulted when a new managed InfoCard is created; the type may be
               changed without affecting the authentication credential type assigned to InfoCards
               created before the change. Recognized values are:

               password
               passwd
                   This is the username/password credential type. See
                   INFOCARD_STS_PASSWORD_METHOD[109].

               cert
                   This is the X.509 V3 certificate credential type. An SSL client certificate
                   must be used with the request to dacs_managed_infocard(8)[95] for a managed
                   InfoCard, and the same certificate must be used when the managed InfoCard is
                   submitted to a Relying Party. A self-signed certificate may be used.

               card
                   This is the self-issued credential type. A self-issued InfoCard must be
                   submitted with the request to dacs_managed_infocard(8)[95] for a managed
                   InfoCard, and the same self-issued InfoCard must be available to the user's
                   Identity Selector when the managed InfoCard is submitted to a Relying Party.
                   This self-issued InfoCard does not need to be separately registered using
                   dacs_infocard(8)[105].

               kerberos
                   This is the Kerberos V5 credential type. This authentication credential type
                   is currently unsupported.

                   Note
                   Although the specification allows an ordered list of STS endpoints to appear,
                   at present only a single endpoint may be configured.

           INFOCARD_STS_CACERTFILE (Required1-C)
               This directive, which is required by dacs_managed_infocard(8)[95], specifies the
               filename of the certificate authority's PEM-encoded X.509 certificate for
               INFOCARD_STS_CERTFILE[110].

                   Note
                   File permissions and ownership must be set appropriately to allow run-time
                   access.

           INFOCARD_STS_CERTFILE (Required1-C)
               This directive, which is required by dacsinfocard(1)[111], dacs_infocard(8)[105],
               and dacs_managed_infocard(8)[95], specifies the filename of the PEM-encoded X.509
               certificate for the Secure Token Service provided by dacs_sts(8)[94].

                   Note
                   File permissions and ownership must be set appropriately to allow run-time
                   access. If a self-signed certificate is being used, the appropriate root
                   certificate must be installed on the system that is running the Identity
                   Selector.

           INFOCARD_STS_KEYFILE (Required1-C)
               This directive, which is required by dacsinfocard(1)[111],
               local_infocard_authenticate[112], dacs_infocard(8)[105],
               dacs_managed_infocard(8)[95], and dacs_sts(8)[94], specifies the filename of the
               key for the X.509 certificate specified by INFOCARD_STS_CERTFILE. If this file is
               password protected, INFOCARD_STS_KEYFILE_PASSWORD[113] must be configured.

                   Note
                   File permissions and ownership must be set appropriately to allow run-time
                   access.

           INFOCARD_STS_KEYFILE_PASSWORD (Required1-C)
               If INFOCARD_STS_KEYFILE[114] is encrypted, this directive is required to specify
               the password.

           INFOCARD_STS_PASSWORD_METHOD (Required1-C)
               If the username/password credential type is needed by a managed InfoCard,
               dacs_sts(8)[94] requires this directive to specify how the username and password
               are to be validated:

               empty
                   The password is no password at all (i.e., the empty string). If a password is
                   given, authentication will fail.

               ignore
                   Any password string, including no password at all (i.e., the empty string), is
                   acceptable.

               sts
                   The given password string must exactly match the authentication-time value of
                   the configuration variable infocard_sts_password.

               account:id
                   The given username and password must be valid relative to the specified DACS
                   authentication module identified by the Auth clause label id, which must be
                   enabled and configured as per dacs_authenticate(8)[52]. (Note: This form is
                   currently unsupported.)

           INFOCARD_STS_RP_ENDPOINT (Optional)
               This directive causes dacs_sts(8)[94] to issue security tokens only to selected
               identified Relying Parties; if the identity of a Relying Party, as provided by the
               Address endpoint appearing in the token request's AppliesTo element (apparently
               the URL of the Relying Party's web page) does not match any instance of this
               directive, a token will not be returned. A token will be returned if this
               directive is not used or if the Relying Party is not identified. Not all Relying
               Parties are identified; see INFOCARD_REQUIRE_APPLIES_TO[115]. The syntax for this
               directive is identical to that of INFOCARD_AUDIENCE[116]. Although the Relying
               Party's server certificate can be provided with the identification material in the
               token request, it is not currently accessible to this directive.

           INFOCARD_STS_URL (Required1-C)
               This directive, used by dacs_managed_infocard(8)[95], dacs_mex(8)[108], and
               dacs_sts(8)[94], specifies the URL of the Secure Token Service for managed
               InfoCards.

           INFOCARD_TOKEN_DRIFT_SECS (Optional1)
               A security token (produced by dacs_sts(8)[94], for instance) bears a validity
               condition; a relying party may reject a token if its current system date/time lies
               outside of the time window prescribed by the token. Because the clock at the
               IP/STS (which issued the token) and the clock at the relying party may not be
               closely synchronized - the relying party's clock may be faster or slower than the
               IP/STS's clock - a relying party may be willing to permit a certain amount of
               "clock drift" before it rejects a token. This directive specifies the maximum
               number of seconds that the IP/STS's clock may be too fast or too slow. If the
               directive's value is zero, or if the directive is not configured, a compile time
               default value is used (currently, 300 seconds). If the directive's value is
               "disable", the validity test is suppressed.

           INFOCARD_TOKEN_ISSUER (Required1-C)
               This directive, used by dacs_managed_infocard(8)[95] and dacs_sts(8)[94],
               specifies the Issuer of a managed InfoCard as a URI. The value "self" can be used
               to represent the special URI identifying a self-issued InfoCard.

                   Note
                   If your Identity Selector does not let you choose a managed InfoCard when you
                   think that it ought to (i.e., the value of this directive in effect when the
                   managed InfoCard was created matches the web page's issuer parameter), it
                   seems that the INFOCARD_TOKEN_ISSUER is ignored by an Identity Selector in
                   preference to the name in the Identity Provider's SSL certificate. It has been
                   noted that if a Relying Party uses a wildcard certificate[117], an Identity
                   Selector may have trouble matching the issuer parameter in an HTML OBJECT
                   request with an InfoCard; it may be necessary for the Relying Party to specify
                   the value of the issuer parameter as the empty string.

           INFOCARD_TOKEN_LIFETIME_SECS (Optional1)
               This optional directive specifies the lifetime, in seconds, of a secure token
               created by dacs_sts(8)[94]. If not provided, a compile-time value is used. To
               reduce the window of vulnerability where a token might be captured and used by an
               attacker, this period should be relatively short (on the order of a few seconds).
               Note that a Relying Party is free to account for inadequately synchronized clocks
               when deciding whether it should accept a token, so this lifetime is effectively a
               recommendation for the recipient of the token. If the clocks at the Identity
               Selector and token issuer are not sufficiently synchronized, the Identity Selector
               will reject a token if the token's validity window is outside of its clock's
               current value.

           INFOCARD_TOKEN_MAX_LENGTH (Optional1)
               A relying party can use this directive to specify the maximum size (in bytes) of a
               security token that it will accept. If this directive is not configured or is
               zero, a compile time default value is used (currently, 16384 bytes).

           INFOCARD_USERNAME_SELECTOR (Optional1)
               This directive determines how the DACS username is selected for a self-issued
               InfoCard during registration by dacs_infocard(8)[105]. The resulting identity is
               relative to the current jurisdiction[48]; that is, if the InfoCard is used to sign
               on at a jurisdiction where it was registered, the jurisdiction will issue
               credentials for the username that was registered with the InfoCard. The following
               directive values are recognized:

               credentials
                   The username is obtained from the identity in effect at registration time;
                   there may only be one such set of credentials and they must have been issued
                   by the jurisdiction at which registration is occurring. This is the default
                   behaviour if the directive is not given.

               email
                   The username is obtained from the email address field of the InfoCard; the
                   email address must be a syntactically valid username (see dacs(1)[80]).

               webpage
                   The username is derived from the web page URL field of the InfoCard; this is
                   not currently implemented. (see dacs(1)[80]).

           JURISDICTION_NAME (Required1)
               The name of the jurisdiction. The syntax is the same as for FEDERATION_NAME[57]:
               an alphabetic followed by zero or more alphanumerics, '-' (hyphens), or '_'
               (underscores). Note that periods are not permitted. By convention, this name is in
               all-caps, Please see dacs(1)[80] for additional information. Example: METALOGIC

           LOGINGEN_FILE (Optional1)
               Reserved for future use. (Used with the DACS logingen utility, this directive
               gives the full pathname of the template file.)

           LOGINGEN_PROG (Optional1)
               Reserved for future use. (Used with the DACS logingen utility, this directive
               specifies a program which will read LOGINGEN_FILE on its stdin and write the
               filtered output to stdout.)

           LOG_FILE (Optional1)
               DACS uses the LOG_FILE directive to identify the primary file to which it should
               write log information.  DACS performs directory name interpolation on the pathname
               string using a syntax and method similar to Apache's mod_vhost_alias[8] module
               (see String Interpolation[24]).

               The result after interpolation must either be the absolute pathname of a file to
               write log information to, or the word "syslog". In the latter case, syslog(3)[118]
               is used, with an ident argument of "dacs" and a facility of "user". Each DACS
               logging level is mapped to the corresponding syslog level, with the trace level
               mapped to syslog's debug level.

               While DACS is starting and before it reads and processes its configuration files,
               this directive is not yet available to it; until DACS knows what LOG_FILE is, or
               should LOG_FILE not be writable, the value of LOG_FILE is obtained from the value
               of DACS_LOG. A compile-time specified value, DACS_LOG can be specified when DACS
               is built (the default is equivalent to ${Conf::DACS_HOME}/logs/error_log). If
               DACS_LOG is unusable, stderr is used.

           LOG_FILTER (Stack)
               This directive configures a fine-grained way of specifying which messages will be
               written compared to the LOG_LEVEL[119] directive. The directive, which may be
               repeated, selects the types of events that DACS should log; unselected events are
               not recorded in a log file. It also provides a way for different kinds of messages
               to be logged to different files.

               Because this directive is in the Stack category[13], "later" directives supercede
               earlier ones. When a directive is found that allows a message to be logged, no
               additional directives are examined for the message. If this directive is not
               given, the default filtering is done based on the LOG_LEVEL and LOG_SENSITIVE
               directives.

               The syntax is one of:

                   LOG_FILTER "type flag[,flag]* level name [[+|-]file]"
                   LOG_FILTER "any flag[,flag]* level [[+|-]file]"

               The type, which is one of the keywords program, module, filename, or function
               (case insensitive), specifies the type of the event source to which this filter
               applies; i.e., it indicates what name is to be matched against. If type is
               filename, for instance, it means that for this filter to be applicable to a
               particular log message, the name must match the filename from which the log
               message is generated.

               A list of comma-separated, case-insensitive modifier flags specifies how matching
               of type is done against name. A flag can have the value exact, regex, icase,
               sensitive, user, audit, or normal.

               The name is matched against type case sensitively, unless the icase flag is
               present. Matching is performed using regex(3)[120] regular expression matching if
               the regex flag is present, or using a string comparison if the exact flag is
               present (these two flags are mutually exclusive).

               A message can have no attributes associated with it, or any combination of the
               attributes sensitive, user, and audit. Messages with the sensitive attribute might
               include potentially private information, such as a password. Messages with the
               audit attribute include relatively high-level events, such as successful and
               unsuccessful authentication results, signouts, and access control decisions. The
               user attribute is associated with messages produced by the print()[121] and
               printf()[122] functions.

               Modifier flags are used to select (or deselect) messages to be logged. By default,
               only normal messages are logged; these are messages without any attributes. The
               LOG_SENSITIVE[123] directive can change the default to enable sensitive messages.

               If the audit flag is given, a message is logged only if it has that attribute.
               Messages with the sensitive attribute are not logged unless the sensitive flag is
               given, and messages with the user attribute are not logged unless the user flag is
               given.

               Assuming the type and level do not deselect the message, here are some example
               cases:

               •   a message without any attributes will be logged provided the audit flag is not
                   specified

               •   a message with both the audit and sensitive attributes will be logged only if
                   the filter specifies the audit flag, and either the sensitive flag is given or
                   LOG_SENSITIVE is enabled

               If the directive's value begins with the keyword any, the filter matches any
               source, so there is no name and the modifier flags related to matching name are
               ignored.

               In order of increasing importance and decreasing amount of detail, level is one of
               the following case-insensitive keywords:

               •   trace (or tracing, least important messages)

               •   debug (or debugging)

               •   info

               •   notice (or notices)

               •   warn (or warning or warnings)

               •   error (or errors)

               •   critical (or crit)

               •   alert (or alerts)

               •   emerg (or emergency, most important messages)

               Any log message having a lower importance than level will not satisfy the filter.
               If the logging level is set to info, for example, messages having a lower level
               (debug and trace) will not be recorded. These levels are intended to have
               semantics similar to those of the logging levels used by Apache and
               syslog(3)[118].

               The file field, which is optional, is used instead of (or in addition to) LOG_FILE
               and interpolation is performed in the same way. If file is syslog, all messages
               matching the filter will be written using syslog(3) instead of to LOG_FILE. If
               file is prefixed with a '+', output will be written to both LOG_FILE and the
               expansion of file; if it is prefixed with nothing or -, the default behaviour
               results; the initial character can be escaped using a backslash. In some
               situations, using /dev/null for file is useful to discard unhelpful messages.

               Without regard to how LOG_LEVEL and LOG_SENSITIVE are configured, this directive
               says that all messages generated by any function located within the DACS source
               file named crypto.c having a level of at least debug, should be logged, including
               those marked as sensitive:

                   LOG_FILTER 'filename exact,sensitive debug crypto.c'

                   Tip
                   The directive:

                       LOG_FILTER 'any audit trace +syslog'

                   causes all log messages with the audit modifier having level trace or higher
                   to be written to both syslog(3) and LOG_FILE. If you want to use the syslog
                   feature in this way, you will need a section in the syslog(3) configuration
                   file (typically /etc/syslog.conf) that looks something like the following,
                   depending on the flavour of syslog(3) that your system uses:

                       !dacs
                       *.*        /usr/local/dacs/logs/audit_log

                   The following directive is similar except that it causes log messages
                   classified as either audit or sensitive (or both) to be written to both
                   LOG_FILE and the file logs/Audit_log, relative to the root of the DACS
                   installation directory:

                       LOG_FILTER 'any audit,sensitive TRACE +%bD/logs/Audit_log'

                   By removing the '+' character, the log messages would not be written to
                   LOG_FILE.
               Please refer to dacs(1)[124] for general information about logging.

           LOG_FORMAT (Optional1)
               This directive is used to specify the format of the string that prefixes log
               messages produced by DACS. Interpolation is controlled by printf-like format
               specifiers, as follows:

               %%
                   Insert a literal percent character

               %a
                   Insert the application name, which is typically the basename of argv[0].

               %c
                   Insert the value of a per-process message counter, which is then incremented.

               %F
                   Insert event descriptor flags, which indicate whether the message is an audit
                   event ("A"), a potentially sensitive event ("S"), a user event ("U"), or a
                   normal event ("-").

               %fn
                   Interpolate the federation name.

               %fd
                   Interpolate the federation domain.

               %j
                   Interpolate the jurisdiction name.

               %l
                   Interpolate the log level of the message.

               %p
                   Interpolate the process id of the process generating the message.

               %sF
                   Interpolate the name of the function generating the message.

               %sf
                   Interpolate the name of the file generating the message.

               %sl
                   Interpolate the line number within the file that is generating the message.

               %sm
                   Interpolate the name of the module generating the message.

               %sp
                   Interpolate the name of the program generating the message.

               %t
                   Interpolate the current time and date.

               If a % is followed by any other character, that character is printed. Other
               characters in the format specifier are interpolated verbatim. If a requested value
               is not available, nothing is interpolated.

                   Tip
                   When debugging, it is often helpful to compare log messages produced when
                   slightly different configurations are used to service a given request. With
                   the default prefix, log messages tend to be unique. To make it easier to
                   compare two sequences of log messages (e.g., using diff(1)[125]), append a
                   special character (such as a tab) or a readily distinguished character string
                   to the LOG_FORMAT format string. This will simplify stripping the prefix from
                   log messages (e.g., using sed(1)[126]). Alternatively, set an empty prefix
                   string, or write a conditional directive that eliminates the prefix only when
                   debugging.

           LOG_LEVEL (Optional1)
               This directive specifies the minimum default logging level in effect - log
               messages less important than this will be discarded. For example, if LOG_LEVEL is
               warn, only log message of that level or more important will be written and all
               others will be discarded. If there is an applicable LOG_FILTER[127] directive it
               overrides this behaviour, however.

               Briefly, in order of increasing importance, the names of the levels are: trace,
               debug, info, notice, warn, error, critical, alert, and emerg. The trace logging
               level emits the most detail and the emerg level emits the least. Refer to the
               LOG_FILTER[127] directive for additional information.

               The LOG_LEVEL overrides the compile-time default, which is obtained using the
               LOG_DEFAULT_LEVEL symbol.

               By default, informational log messages are emitted almost immediately when most
               DACS web services begin execution. To suppress these messages, without regard to
               any other logging configuration, build DACS with
               --enable-hush-startup-logging[128].

               The "verbose" command line flag (-v) or the VERBOSE_LEVEL directive overrides this
               directive, which are in turn overridden by the -t command line flag ("trace") or
               the TRACE_LEVEL directive. A verbose level of one is equivalent to the info level;
               a verbose level greater than one is equivalent to the debug level. Enabling a
               trace level, with any value, is equivalent to requesting the trace logging level.

               Also see debug_dacs[129].

           LOG_SENSITIVE (Optional1)
               This directive determines the default behaviour for logging messages with the
               sensitive attribute. It may have the values "yes" (to enable logging sensitive
               messages) or "no" (the default, which discards such messages).

                   Note
                   Sensitive messages may include passwords and other authentication material
                   that should remain private. This directive will not suppress potentially
                   sensitive messages generated by third-party support packages (e.g., Samba or
                   OpenLDAP), Apache (including mod_auth_dacs), or the operating system. For
                   example, requests for CGI programs invoked using the GET method will be logged
                   in the Apache Access Log, and the request's query string will typically be
                   printed; password parameters may be present in the log (see
                   mod_log_config[130] for details of how to change the log format. If sensitive
                   messages are being logged, make doubly-sure that log files have appropriate
                   permissions. Also, unencrypted logging messages directed over a network (e.g.,
                   through syslog(3)[118]) may be visible to an attacker.

           NAME_COMPARE (Optional1)
               This directive sets the default method used to compare DACS names in various
               contexts. Ordinarily, federation, jurisdiction, usernames, and group names are
               compared case-sensitively. If the value of this directive is (case-insensitively)
               case, then case-sensitive comparisons are used; if its value is nocase,
               case-insensitive comparisons are used; if its value is default, then the
               application default (either case or the value selected by the application) is
               used. This directive can be overridden on a case-by-case basis (pun intended);
               refer to the user() function (dacs.exprs(5)[20]) for details.

                   Security
                   The selected comparison method applies to all components of DACS names; if
                   this is not desired, the strtr() function might be helpful. Note that this
                   directive does not alter the DACS name determined by authentication, only the
                   way the name is compared. While it's unlikely (and bad practice) for
                   federation names (or jurisdiction names) to differ only in their case, it is
                   not unusual for usernames to be treated case-insensitively for authentication
                   purposes and for this reason this feature should be used with care. When
                   case-insensitive comparisons are used, the usernames bob and BOB will be
                   considered to be equivalent, for example; sometimes this is useful but it can
                   also be a security hole, depending on how authentication is configured.

                   Changing the comparison method from case-insensitive back to case-sensitive
                   may have undesirable consequences; identities that were formerly equivalent
                   might suddenly become distinct, which at the very least may confuse users.

                   The recommended practice is to not define NAME_COMPARE or set it to case
                   because of its system-wide effects. When needed, use the user() function with
                   an appropriate comparison method argument.

           NOTICES_ACCEPT_HANDLER (Optional1)
               This directive provides a URL (absolute or relative) to which a user agent will be
               redirected by the notice acknowledgement handler after a positive acknowledgement
               to a notice has been received (i.e., when the notice or notices were "accepted"),
               but only if it is not possible to redirect the user agent to the request that
               initiated notice acknowledgement processing (e.g., if that request used the POST
               method). If not provided, a default HTML page will be returned.

           NOTICES_ACK_HANDLER (Optional1)
               This directive provides the URL of the notice acknowledgement handler, which is
               the program that receives a user's response to a request to acknowledge one or
               more notices. If not provided or if it is the empty string, the notice
               presentation handler should assume that it must also act as the notice
               acknowledgement handler.

           NOTICES_DECLINE_HANDLER (Optional1)
               This directive provides a URL (absolute or relative) to which a user agent will be
               redirected by the notice acknowledgement handler after a negative acknowledgement
               to a notice has been received (i.e., when the notice or notices were "declined").
               If not provided, a default HTML page will be returned.

           NOTICES_NAT_NAME_PREFIX (Optional1)
               The default prefix of the name of the HTTP cookie bearing a notice acknowledgement
               token is "NAT-DACS". This directive can be used to override the default.

           NOTICES_SECURE_HANDLER (Optional1)
               By default, dacs_notices(8)[131] takes steps to prevent attempts to simply ask for
               notice acknowledgement tokens (NATs), effectively bypassing having to see notices.
               If the value of this directive is "no", however, these steps will be disabled.
               Please refer to the description of dacs_notices' Secure Mode[132] of operation.

           NOTICES_WORKFLOW_LIFETIME_SECS (Optional1)
               By default, a secure notice acknowledgement workflow must complete within 120
               seconds. This directive can be used to specify an unsigned integer value that will
               override the default.

           PAMD_HOST (Optional1)
               When local_pam_authenticate[133] is used, this directive is required to specify
               the domain name or IP address of the host where pamd(8)[134] is executed.

           PAMD_PORT (Optional1)
               When local_pam_authenticate[133] is used, this may be used to specify the port
               number or service name on PAMD_HOST where the pamd(8)[134] server accepts
               connections. This directive can be overridden on the pamd command line. If no
               value is explicitly specified, programs will use the compile-time symbol
               PAMD_SERVICE_NAME (by default, "dacs-pamd"), which assumes that /etc/services has
               been configured accordingly.

           PASSWORD_CONSTRAINTS (Optional1)
               This directive describes requirements that must be met by new passwords created by
               dacs_passwd(8)[135], other than when used by a DACS administrator. In other
               situations, where a DACS administrator must be running the program (such as with
               dacspasswd(1)[136] or dacstoken(1)[137]), a warning message is produced if a new,
               non-conforming password or PIN is set but the password can still be used.

                   Important
                   Each system usually imposes its own constraints on the characters that may be
                   used in password, minimum and maximum password lengths, and so on. These
                   constraints are external to DACS. With respect to the PASSWORD parameter
                   passed to DACS web services (e.g., local_ldap_authenticate[91]) and used with
                   DACS accounts (e.g., dacspasswd(1)[136]), it is safest to stick to printable
                   ASCII characters. A compile-time maximum length of 128 characters is imposed
                   on the PASSWORD parameter. Limits are also imposed on the USERNAME and
                   AUXILIARY parameters (see Web Service Arguments[138]). These limits are
                   more-or-less arbitrary but necessary.
               This directive's syntax is also used by the PASSWORD_AUDIT[139] directive, which
               may appear in an Auth clause.

               The format of the constraint string is a set of zero or more comma-separated
               terms. Each term consists of an unsigned integer (zero or greater) followed
               immediately by a single character (case sensitive) that indicates a constraint
               type:

               •   L refers to the minimum length of a password, in characters;

               •   C is the minimum number of characters from each case that must be present
                   (e.g., 3C means a password must have at least three upper case characters and
                   three lower case characters);

               •   D is the minimum number of digits (0-9) that must be present;

               •   and P is the minimum number of punctuation characters (see ispunct(3)[140])
                   that must be present.

               A constraint type may not appear more than once. Not all constraint types need to
               be specified. If this directive is not given, or is the empty string, or the word
               "none" (case insensitive), a minimum password length of any six characters is
               used. If a constraint type is missing, a minimum of zero is used. In no event is a
               password of fewer than six characters allowed for a non-administrator, however.

                   Security
                   No check is made for constraints that are impossible to satisfy.

               For example, the following directive says that passwords must be at least eight
               characters long and include at least one digit and one upper case and one lower
               case character, with no punctuation characters required:

                   PASSWORD_CONSTRAINTS "8L,1D,1C,0P"

           PASSWORD_DIGEST (Optional1)
               This directive specifies the cryptographic hash function or key derivation
               function used by dacspasswd(1)[136], dacs_passwd(8)[135], dacstoken(1)[137],
               dacs_token(8)[141], and dacs_admin(8)[142] for computing password digests. The
               same specification syntax described here is used in other contexts throughout DACS
               where a digest function needs to be parameterized. Not all digest functions can be
               used in all contexts, however (see dacs(1)[143]). By default, SHA-512 is used.
               Prior to version 1.4.34, the default was SHA-1.

               In most cases only the name of the function is required, but functions that are
               parameterized (e.g., SCRYPT) require all configurable variables to be provided -
               there are no defaults.

               The syntax for specifying a cryptographic digest is as follows:

                   digest-descriptor ::= dn ws* [ '[' arg-list ']' ]
                   arg-list ::= name '=' value [, arg-list ]

               A digest-descriptor is a digest name (dn), optionally followed by whitespace,
               optionally followed by an argument string (arg-list) within square brackets. The
               argument string consists of one or more name=value pairs, separated by a comma.
               The order of the pairs is not significant. A name may not appear more than once
               and an unrecognized parameter name is not allowed. Nothing can follow the closing
               square bracket. Whitespace may precede a name, but everything following the '=' is
               part of the value. The value ends at a comma or the closing bracket, so embedded
               whitespace is possible (but should be avoided). Whitespace following a comma is
               ignored. A value may be surrounded by single or double quotes, but escaping is not
               allowed. Examples:

                   PASSWORD_DIGEST "scrypt[N=1024, r='8', p=16, dklen=32]"
                   PASSWORD_DIGEST "sha512/t[t=72]"
                   PASSWORD_DIGEST "pbkdf2[a=sha256,count=4098, dklen=20]"

               The digest name is matched against available password digest functions
               case-insensitively. Non-consecutive hyphens, underscores, and slashes in the
               digest name are treated as equivalent separators. A separator may be omitted if
               doing so would not join two digits. An initial or trailing separator is
               disallowed. For example:

                   "Sha224" matches "SHA-224"
                   "SHA/512" matches "SHA-512"
                   "pbkdf2sha512" matches "PBKDF2-SHA512"

               Use the digests subcommand of dacs(1)[143] to list available algorithms and
               checkdigest to validate a digest descriptor:

                   % dacs digests
                   % dacs checkdigest "pbkdf2[a=sha256,count=80000,dklen=32]"

               The following cryptographic digest algorithms are available:

               CRYPT
                   for the Unix crypt(3)[144] function

               MD5
                   for the MD5 function[145] (deprecated).

               SHA-1
               SHA-224
               SHA-256
               SHA-384
               SHA-512
               SHA-512/224
               SHA-512/256
               SHA-512/t
                   , , , , for one of the variants of the Secure Hash Algorithm functions (FIPS
                   180-4[146]).

               SHA3-224
               SHA3-256
               SHA3-384
               SHA3-512
                   , , , for one of the variants of the Secure Hash Algorithm-3 functions (FIPS
                   PUB 202, August/2015[147]).

               The following password-based key derivation algorithms are available:

               ARGON2
                   for the Argon2[148] memory-hard password-based key derivation function.
                   Required parameters with suggested minimum values:

                   y
                       The algorithm flavour, which must be "i" for Argon2i or "d" for Argon2d
                       (suggested: "i").

                   v
                       The version identifier, in decimal, which currently must be 19.

                   m
                       The memory requirement, in KB (suggested: 32).

                   t
                       The iteration count (suggested: 3).

                   p
                       The amount of requested parallelism, referred to as "lanes" (suggested:
                       4).

                   T
                       The output length, in bytes (suggested: 32).

                   X
                       The associated data, encoded as a hex string. Use the empty string if
                       there is no associated data.

                   S
                       The salt, encoded as a hex string. In this context, this must be the empty
                       string, because the salt is stored elsewhere in the password entry.

                   Example:

                       PASSWORD_DIGEST "argon2[y=i,v=19,m=32,t=3,p=4,T=32,X='000102',S='']"

               PBKDF2
                   for the PBKDF2 password-based key derivation function with the internal hash
                   function specified by the first argument. Required parameters (with suggested
                   minimum values):

                   a
                       The name of the internal hash function, such as "sha1", "sha256",
                       "sha512", "sha3-256", or "sha3-512".

                   count
                       The iteration count (suggested: 80,000).

                   dklen
                       The output length in bytes, also called the derived key length (suggested:
                       32).

               PBKDF2-SHA1
                   for the PBKDF2 password-based key derivation function with HMAC-SHA1 (see RFC
                   2898[149]). This should probably be avoided in preference to PBKDF2-SHA256 or
                   PBKDF2-SHA512. Required parameters (with suggested minimum values):

                   count
                       The iteration count (suggested: 80,000).

                   dklen
                       The output length in bytes, also called the derived key length (suggested:
                       32).

               PBKDF2-SHA256
                   for the PBKDF2 password-based key derivation function with HMAC-SHA256.
                   Required parameters (with suggested minimum values):

                   count
                       The iteration count (suggested: 80,000).

                   dklen
                       The output length in bytes, also called the derived key length (suggested:
                       32).

               PBKDF2-SHA512
                   for the PBKDF2 password-based key derivation function with HMAC-SHA512.
                   Required parameters (with suggested minimum values):

                   count
                       The iteration count (suggested: 80,000).

                   dklen
                       The output length in bytes, also called the derived key length (suggested:
                       64).

               SCRYPT
                   for the scrypt memory-hard password-based key derivation function, which uses
                   PBKDF2-SHA256. Required parameters (with suggested minimum values):

                   N
                       CPU/memory cost parameter (suggested: 131,072).

                   r
                       Block size parameter (suggested: 8).

                   p
                       Parallelization parameter (suggested: 1)

                   dklen
                       The output length in bytes, also called the derived key length (suggested:
                       32).

               The PBKDF2, scrypt, and Argon2 functions should be carefully parameterized to be
               computationally intensive and memory intensive, if applicable, for the platform on
               which the password-based authentication module is run. The goal is to make
               password hashing unavoidably inefficient. This makes it more difficult for an
               attacker that accesses a copy of a password file to guess passwords because each
               guess takes longer or requires more resources than a comparatively efficient
               algorithm. For additional information about these algorithms and their parameters,
               see argon2()[150], pbkdf2()[151], and scrypt()[152].

                   Security
                   Apart from using an authentication method stronger than one based solely on
                   passwords, it is considered best practice to use a key derivation function
                   such as pbkdf2 or scrypt rather than a plain cryptographic digest for the
                   PASSWORD_DIGEST.

                   These key derivation functions are intended to be inherently inefficient yet
                   as efficient as possible. They are used for this purpose to provide additional
                   resistance against brute force methods, even those that employ special
                   hardware, should an attacker obtain a password file. But they do not help much
                   if users are allowed to choose weak passwords, if the key derivation function
                   is not properly parameterized, or if the function has exploitable properties.
                   In these cases, it will still not be much of a challenge for an attacker to
                   determine the original passwords. On the other hand, if only strong passwords
                   are allowed and a good cryptographic digest function is used, a key derivation
                   function is unnecessary. A key derivation function is most suitable for
                   protecting passwords that are neither very weak nor particularly strong.

                   Memory-hard functions are a relatively new idea and many designs have not yet
                   received much scrutiny. It should also be noted that significantly increasing
                   the memory and CPU resources needed for each authentication operation could
                   pose a problem for sites that must be prepared to handle many concurrent
                   sign-ons. Running several memory-hard functions simultaneously on a server
                   could cause it to run out of resources, which may provide an opportunity for
                   denial of service attacks.

                   The selected password digest algorithm and its parameters should be reviewed
                   periodically. If changes are made to PASSWORD_DIGEST, they will apply to new
                   accounts but existing password entries will not be invalidated, so it may be
                   necessary to force users to reset their passwords.
               The digest algorithm and parameters used are stored with a password entry when the
               password is set or changed. The algorithm or its parameters can therefore be
               reconfigured without voiding any pre-existing password entries. As processing
               power continues to increase, the strength of the configured PASSWORD_DIGEST should
               periodically be increased. An administrator can determine the digest method used
               for each password entry (see dacspasswd(1)[136]), and a user that has an entry
               that employed a relatively weak method should be asked to re-register his
               password.

               The system crypt() function may have platform-dependent limitations on the number
               of characters that are significant in a password or the maximum length of a
               password, but all other algorithms use all of the characters and impose no maximum
               password length.

           PASSWORD_OPS_NEED_PASSWORD (Optional1)
               Ordinarily, dacspasswd(1)[136] will not allow password maintenance operations
               (other than listing) unless the user has authenticated as an ADMIN_IDENTITY[39] or
               provides a valid password for the username being administered (one that was
               created by dacspasswd(1)[136]). If this directive is "no", a password is not
               required and dacspasswd will assume that all necessary access control has already
               been performed.

           PASSWORD_SALT_PREFIX (Optional1)
               This string is prepended to a random salt string used when creating a digest of a
               password used by DACS in various contexts (e.g., dacspasswd(1)[136]). This may be
               of interest when PASSWORD_DIGEST[106] is CRYPT because some versions of
               crypt(3)[144] interpret the salt string.

           PERMIT_CHAINING (Optional1)
               If "yes", credentials exported by dacs_acs(8)[6] anywhere in the federation as a
               result of a rule having the permit_chaining attribute set to yes will be honoured
               at this jurisdiction for access control purposes.

                   Security
                   Enabling this feature weakens security because it may allow misappropriated
                   DACS identities to be used at a jurisdiction that has enabled PERMIT_CHAINING.
                   Use of this feature is discouraged but is sometimes necessary; use with care.
                   Refer to the description of the permit_chaining attribute in dacs.acls(5)[25].

           PROXY_EXEC_DOCUMENT_ROOT (Optional1)
               Reserved for future use.

           PROXY_EXEC_MAPPER_DEFAULT_ACTION (Optional1)
               Reserved for future use.

           PROXY_EXEC_MAPPER_LOGGING (Optional1)
               Reserved for future use.

           PROXY_EXEC_MAPPER_LOG_FILE (Optional1)
               Reserved for future use.

           PROXY_EXEC_MAPPER_RULES_FILE (Optional1)
               Reserved for future use.

           PROXY_EXEC_PROG_URI (Optional1)
               Reserved for future use.

           RLINK (Optional)
               This directive, which may be repeated, is used to determine whether the current
               request includes an Rlink[153]. The RLINK directives are processed in the order in
               which they occur. The value of the directive is a space-separated pair: the first
               is an expression[20] that is evaluated at rule-processing time, and the second is
               a VFS specification[154] for the location of the Rlinks (i.e., a DACS URI, an item
               type, or an absolute pathname). If the expression evaluates to a non-empty string:

               •   the string is assumed to be an Rname[153], which is relative to the VFS
                   specification,

               •   Rlink processing is enabled for the current request, and

               •   no other RLINK directives are considered or evaluated.

               If the expression evaluates to the empty string or an error occurs, the directive
               is ignored and the next one, if any, is processed. Example:

                   RLINK '"${Args::RNAME:?}" /usr/local/dacs/rlinks'

               In the example above, the directive specifies that if the current request includes
               a non-empty argument called RNAME, then its value is an Rname, Rlink processing is
               enabled, and the Rlink can be found in the /usr/local/dacs/rlinks directory.

           ROLE_STRING_MAX_LENGTH (Optional1)
               A limit is imposed on the length of the role string returned by any authentication
               or roles service, the length of any intermediate role string formed by
               concatenation during determination of the role string, and the length of the final
               role string, which is used in credentials. A string that exceeds the limit is
               invalid and treated as an empty string. The limit is necessary because credentials
               (which may contain a role string) are encapsulated within an HTTP cookie and
               browsers have context-dependent and implementation-dependent restrictions on
               cookie lengths. This directive is used to set the limit, overriding a compile-time
               value of 200 bytes. Please refer to dacs_authenticate(8)[50] for additional
               information about roles.

                   Warning
                   A role string that is too long may cause the user to experience strange and
                   possibly incorrect behaviour from DACS because the browser may discard cookies
                   produced by DACS.

           SECURE_MODE (Optional1)
               This directive causes DACS to operate "insecurely" only if its value is "no" or
               "off" (case insensitive), otherwise DACS will use a more secure mode of operation.
               In secure mode, DACS requires all user interactions to be through SSL/TLS (HTTPS)
               and cookies will have the secure attribute. The default is "yes". Odd behaviour
               may result if interactions between DACS and a particular client mix http and https
               requests (such as when handlers are involved).

                   Security
                   Always use the secure mode of operation unless you fully understand the
                   consequences of disabling it. For DACS to be a secure system, secure mode
                   should be disabled only for testing purposes or if all HTTP traffic is
                   protected by some secure means other than SSL/TLS.

           SIGNOUT_HANDLER (Optional1)
               When dacs_signout(8)[33] terminates, provided a fatal error was not encountered,
               the subsequent action can be customized using this directive. For instance, the
               system administrator can ask for the user's browser to be redirected to a login
               page. This capability can also be used to construct a chain of requests to signout
               a user from multiple federations.

               The following syntaxes are supported:

                1. SIGNOUT_HANDLER "[url] URL"

                   This form will cause DACS to redirect the client to the specified URL, which
                   may be a relative or absolute URL. If the keyword url is absent, URL must
                   begin with the four characters http. Whether the GET method is used depends on
                   the context of the original request. The URL may contain a properly escaped
                   query string; DACS will append the following parameters, URL encoded and in
                   the order given:

                   DACS_VERSION
                       The version number of DACS (e.g., "1.4").

                   DACS_FEDERATION
                       The federation that received the service request, if available.

                   DACS_JURISDICTION
                       The jurisdiction that received the service request, if available.

                   DACS_SIGNOUT_RESULT
                       The number of credentials (a non-negative integer) that
                       dacs_signout(8)[33] asked the web browser to delete by setting expired
                       HTTP cookies. Note that the total number of HTTP cookies set by
                       dacs_signout(8)[33] could be greater than this number.

                   The following directive will redirect the user's browser to a relative URL:

                       SIGNOUT_HANDLER "url /dacs/handlers/signout_ok.html?FOO=bar"

                2. SIGNOUT_HANDLER "defaulturl URL"

                   This form is like that of the url syntax except that a URL given by a
                   DACS_SIGNOUT_HANDLER parameter will be used if it is passed to
                   dacs_signout(8)[33]. A DACS_SIGNOUT_HANDLER parameter is ignored in the other
                   forms of the SIGNOUT_HANDLER directive. If that parameter is absent, the URL
                   specified by this directive is used. As in the url form, DACS will append
                   parameters to the DACS_SIGNOUT_HANDLER URL. Note that the defaulturl keyword
                   is not optional.

                3. SIGNOUT_HANDLER "[file] full-pathname"

                   This form causes the contents of the file named by full-pathname to be
                   returned. The file must include any header lines it requires, such as a
                   Content-Type line, a header-terminating blank line, and then the document
                   content.

                       Note
                       The "full-pathname" usage differs from the "local-URL" usage of the
                       ACS_ERROR_HANDLER directive, though both elements begin with a slash
                       character; the former specifies the absolute pathname of a file, while the
                       latter specifies a URL local to the receiving web server. To specify a
                       relative URL, use the url keyword.

                4. SIGNOUT_HANDLER "[message] \"message\""

                   This form causes the given message, surrounded by escaped double quote
                   characters, to be returned as HTML.

                       SIGNOUT_HANDLER "message \"You're outta here!\""

                5. SIGNOUT_HANDLER "credentials"

                   This form causes the user's remaining credentials to be displayed as an HTML
                   document. This is the default behaviour.

               The optional keywords are treated case-insensitively.

           SSL_PROG (Optional1)
               The full pathname of the command used to provide an SSL/TLS connection for group
               information distribution. Currently, only sslclient(1)[155] is supported for this
               purpose.

           SSL_PROG_ARGS (Optional1)
               Additional command line arguments to be passed to SSL_PROG.

                   Note
                   This directive is "global" in that it applies to all internal invocations of
                   SSL_PROG. SSL/TLS options should probably be more flexibly configurable (e.g.,
                   from within Auth and Roles clauses).

           SSL_PROG_CA_CRT (Optional1)
               The full pathname of the file containing the CA certificate shared by this DACS
               federation. This is passed to SSL_PROG so that certificates can be validated.

           SSL_PROG_CLIENT_CRT (Optional1)
               This provides the name of a private key and certificate chain PEM file. Please
               refer to sslclient(1)'s[155] -ccf flag.

           STATUS_LINE (Optional1)
               If this directive is set to "on", dacs_acs(8)[6] will emit a DACS-Status-Line[156]
               header in the response from the server. The default value is "off". See the
               description of the DACS_ACS argument[51] for additional details.

           TEMP_DIRECTORY (Optional1)
               A directory where DACS can create temporary files. If the value is not an absolute
               path, the location is relative to DACS_HOME[157]. Lock files, for example, are put
               in this directory. If not configured or if this directory does not exist, a
               compile-time path (DEFAULT_TEMP_DIRECTORY) is used (currently: /tmp). It is always
               safe to delete the contents of this directory if DACS is not running. Read and
               write access to this directory must be restricted to DACS.

           TOKEN_REQUIRES_PIN (Optional1)
               If set to no, then dacstoken(1)[137] does not require created or imported accounts
               to have a PIN. The default value is yes, and a PIN is required.

           TOKEN_HOTP_ACCEPT_WINDOW (Optional1)
               When validating or authenticating against a given one-time password, this is the
               maximum number of successive counter values to consider, if necessary, after the
               expected counter value. A value of zero disables this search. If not configured, a
               compile-time value is used (currently, 3).

           TRACE_LEVEL (Optional1)
               If assigned a non-zero value, tracing is enabled in various DACS services. Larger
               values will cause more events to be traced. This is intended to give an indication
               of the steps a DACS service takes during execution for debugging purposes. Logging
               information is generally written to the web server's log file or to a file
               configured into DACS at compile time. Also see LOG_LEVEL and VERBOSE_LEVEL.

           UNAUTH_ROLES (Optional1)
               This directive is used to assign a role descriptor string[158] to unauthenticated
               users. Association with these roles can be tested using the user()[159] predicate.

               If a jurisdiction configures this directive:

                   UNAUTH_ROLES "anonymous"

               then the following predicates would both return True when applied to an
               unauthenticated user:

                   user("unauth")
                   user("%:anonymous")

               A useful application of this directive is to classify unauthenticated users based
               on contextual elements. Consider this directive:

                   UNAUTH_ROLES from("10.0.0.0/24") ? "user" : ""

               If an unauthenticated user submits a request from a local IP address between
               10.0.0.0 and 10.0.0.255, the user would be treated as having the role user,
               otherwise the user would have no roles. This might be used to conveniently grant
               limited access to "local" users without them having to authenticate. A rule could
               be written to grant access based on having the role user, for example, without
               needing to consider whether or not the user has authenticated.

               Unlike roles assigned to credentials, roles specified in this way are strictly
               local to the jurisdiction that configures them. Some form of coordination is
               required if different jurisdictions need to assign the same roles to
               unauthenticated users. These roles are not reported by
               dacs_current_credentials(8)[92].

           UPROXY_APPROVED (Stack)
               This directive is used by dacs_uproxy(8)[160] to enable proxying to one or more
               hosts and to configure each of those mappings. Each directive specifies a member
               of the "approved list" (i.e., a host that may be proxied) using the following
               syntax:

                   [{'http' | 'https'} '://'] hostname [:port] [path]

               dacs_uproxy is invoked with a URI with the following syntax:

                   .../dacs_uproxy/proxied-hostname[:proxied-port][proxied-path-prefix]

               A proxied-hostname is matched against the hostname of each entry in the list,
               according to the stacked directive ordering, until a (case insensitive) match is
               found. If the proxied-hostname is followed by a port number, that port number must
               be explicitly specified in a directive for a match to occur. If no scheme is
               specified, http is used, regardless of what protocol the port may imply. If a path
               is given, it is appended to the proxied-path-prefix.

               For example, consider the directives:

                   UPROXY_APPROVED "example.com"
                   UPROXY_APPROVED "https://foo.example.com"
                   UPROXY_APPROVED "http://bar.example.com:8080"
                   UPROXY_APPROVED "https://baz.example.com:8443/some/path"

               A request for the proxied hostname foo.example.com, such as this:

                   .../dacs_uproxy/foo.example.com/a/b/c.cgi

               will be forwarded by dacs_uproxy as the URI:

                   https://foo.example.com/a/b/c.cgi

               And the proxied request:

                   .../dacs_uproxy/baz.example.com/a/b/c.cgi

               will be forwarded by dacs_uproxy as the URI:

                   https://baz.example.com:8443/some/path/a/b/c.cgi

               This request would fail because there is no approved entry for bar.example.com:80:

                   .../dacs_uproxy/bar.example.com:80/a/b/c.cgi

           VERBOSE_LEVEL (Optional1)
               If assigned a non-zero value, debugging output is enabled in various DACS
               services. Larger values will cause more output to be generated. This is intended
               to display input arguments and the values of variables as a DACS service is
               executed, for debugging purposes. Logging information is generally written to the
               web server's log file or to a file configured into DACS at compile time. Also see
               LOG_LEVEL and TRACE_LEVEL.

           VERIFY_IP (Required1)
               If "yes", then the IP address in credentials must exactly match the IP address
               from which a service request is made. For example, if DACS issued credentials in
               response to an authentication request that came from the IP address 10.0.0.123,
               then these credentials will only be considered valid for service requests that
               come from that IP address. If the directive's value is "no", this verification is
               not performed. Any other value is assumed to be a valid argument to the
               from()[161] predicate:

                   # Only credentials that were issued to an address on this subnet
                   # are acceptable
                   VERIFY_IP "10.0.0.0/24"

                   Tip
                   Verification might be turned off, for example, in an environment where a user
                   might legitimately submit service requests associated with different IP
                   addresses. Refer to dacs_authenticate(8)[62] for additional information.

           VERIFY_UA (Optional1)
               If "yes", then the user agent string presented when authentication occurred (the
               USER-AGENT request header, exported by Apache as HTTP_USER_AGENT) must match the
               user agent string that is sent with subsequent requests using those credentials.
               This is the default. If the directive's value is "no", this verification is not
               performed at this jurisdiction but credentials it produces can still be verified
               by other jurisdictions. If the directive's value is "disable", the feature is
               totally disabled at this jurisdiction. The feature is always disabled for certain
               internally-generated credentials.

                   Security
                   In typical use of DACS, this feature should be enabled because it makes it
                   somewhat more difficult for misappropriated DACS credentials to be used. It is
                   not a foolproof measure, however, because a sophisticated attacker may be able
                   to obtain or guess a user agent string and use it with stolen credentials,
                   although guesses may draw attention by causing log messages to be emitted.

                   Some user agents, including dacshttp(1)[4], Mozilla, Firefox, curl, wget, and
                   Konqueror, allow the user agent string to be set. Including a random or
                   unusual component in the string will strengthen this feature. Also, middleware
                   may be able to take advantage of its ability to send a string of its choosing
                   in the User-Agent header field.

                   Verification might be turned off, for example, in proxying situations or if
                   credentials are cached by middleware and then legitimately used with different
                   user agents. The feature should be disabled for backward compatibility with
                   releases earlier than DACS 1.4.14.

           VFS (Stack)
               These directives are used to configure the virtual filestore (VFS) subsystem (see
               dacs.vfs(5)[162] and dacsvfs(1)[163] for details).

               The value of this directive (a vfs_uri) has the following syntax:

                   vfs_uri -> [ '[' item_type ']' ] URI

               As specified in RFC 2396[104] and RFC 3986[164], the general form of the URI
               syntax is:

                   scheme : [ // authority] [path] [query] [fragment]

               The item_type (see dacs(1)[165]) is optional in some cases - it can usually be
               omitted if the directive will not be referenced and if it does not refer to an
               indexed object. It is a case-sensitive label that associates this directive with a
               class of objects used by DACS. Some labels are reserved and have predefined
               meaning to DACS; these are always lowercase; dacsconf(1)[2] can list them. Any
               label can be defined by a DACS administrator, but a reserved item type should only
               be defined for its intended use; user-defined item types should therefore include
               at least one uppercase letter. For example, here are a few reserved item types:
               passwds (used by dacspasswd(1)[136] and others), federation_keys and
               jurisdiction_keys (used by dacskey(1)[166] and others), revocations (used by
               dacs.acls(5)[25] and others), and stdin (used by get()[167] and others).

               Although the scheme is case-insensitive, the canonical form is lowercase. The
               authority, query, and fragment URI components are often absent. The query
               component is used to specify options.

               The path component of a URI has the format:

                   [ naming_context ] [ "," rel-path ]

               For paths that have a separate key relative to the naming context, its start is
               delimited by a comma.

               The scheme may be:

               dacs-db
                   A Berkeley DB[168], a hash-based database that manages a collection of objects
                   within a regular file. The item_type is required because it forms the initial
                   part of the key.

               dacs-ndbm
                   The Unix dbm(3)[169] API (includes GNU gdbm[170]), which is similar to
                   dacs-db. The item_type is required because it forms the initial part of the
                   key.

               dacs-fs
               fs
               file
                   Files and directories managed through filesystem operations. Where path names
                   a directory, each key maps to a regular file within that directory.

               dacs-sqlite
                   An SQLite[171] database that manages a collection of objects within a regular
                   file. The item_type is required because it is used as the SQL table name.

               http
               https
                   HTTP-based object access. For example, example.com might configure access to
                   its revocation list like this (with appropriate access controls):

                       VFS "[revocations]https://example.com/dacs/revocation_list"

               dacs-kwv
                   A keyword-value organization that is managed within a single object associated
                   with another item type. In other words, it says that another object,
                   configured with its own VFS directive, has an internal structure where each
                   line of the object represents one record. Each record consists of a keyword,
                   followed by a separator character, and the value associated with the keyword.
                   A keyword consists of a sequence of printable, non-whitespace characters. By
                   default, the separator character is a colon. (A well-known example of a file
                   having this format is /etc/password.) To specify a different separator, the
                   vfs_uri should include the query argument field_sep whose value is the
                   separator character to use. The path component gives the name of the item_type
                   that should be used to manage the underlying objects.

                   For example, components of DACS expect the passwds item type to be defined.
                   Taken together, the following pair of directives specify that the plain file
                   /usr/local/dacs/passwd consists of keyword-value pairs:

                       VFS "[password_file]dacs-fs:/usr/local/dacs/passwd"
                       VFS "[passwds]dacs-kwv:password_file"

                   To specify a space as the separator character instead of the colon (which is
                   the default), use the directives:

                       VFS "[password_file]dacs-fs:/usr/local/dacs/passwd"
                       VFS "[passwds]dacs-kwv:password_file?field_sep=+"

                   Because these are URIs, they must be properly encoded and the '+' character
                   represents a space. If the passwords are to be stored in a Berkeley DB
                   database, the directive would be:

                       VFS "[passwds]dacs-db:/usr/local/dacs/passwd.db"

               dacs-kwv-subscheme
                   A concise way of composing the dacs-kwv scheme with underlying objects
                   accessed using subscheme. Currently, subscheme can be fs (for dacs-fs), http,
                   or https. For fs, the path component is the absolute pathname of a file, its
                   contents having the keyword-value organization. For http and https, the path
                   component is the remainder of the URL (i.e., the scheme that specifies the
                   object is implied), which will be retrieved using the GET method, stored and
                   replaced using the PUT method, deleted using the DELETE method, and tested for
                   using the HEAD method. Note that any options (i.e., a query string) bind to
                   subscheme; if options for dacs-kwv are needed, two separate URIs must be used
                   instead of this method.

                   This configuration directive is almost equivalent to the pair of directives
                   described in the example above:

                       VFS "[passwds]dacs-kwv-fs:/usr/local/dacs/passwd"

                   The following configuration directive states that the password file used by
                   dacspasswd(1)[136] is to be accessed at the URL
                   https://example.com/dacs/passwds using the standard HTTP methods:

                       VFS "[passwds]dacs-kwv-https://example.com/dacs/passwds"

               dacs-vfs
                   The DACS CGI-based VFS service, dacs_vfs(8)[172], which exports VFS operations
                   on VFS objects through a web service. An item type must be provided and must
                   be configured at the specified DACS jurisdiction using any of the supported
                   store types (which means the dacs-vfs scheme can be used to access items
                   stored in a remote regular file, hash-based database, and so on).

                   For example, this directive causes DACS to look for password entries used by
                   local_passwd_authenticate[173] to be accessed through the virtual filestore at
                   example.com:

                       VFS "[passwds]dacs-vfs:https://example.com/cgi-bin/dacs/dacs_vfs"

               A vfs-ref is a reference to a virtual filestore definition and can be a vfs_uri or
               an item_type defined by a VFS directive. In some situations it can also be an
               absolute pathname.

                   Note
                   At present, the VFS does not implement much in the way of concurrency control.
                   Some DACS components use coarse-grained locking to ensure that only a single
                   user can access resources, however, and databases may implement their own
                   concurrency control. Only a few of these resources are not used in a read-only
                   fashion; administrators should adopt appropriate data management practices for
                   them to ensure concurrent updates cannot occur.

           XSD_BASE_URL (Optional1)
               When DACS services are asked to send an XML Schema response (i.e., they are passed
               the argument FORMAT=XMLSCHEMA) and this directive is configured, services will
               emit xmlns:xsi and xsi:schemaLocation attributes, the former having a compile-time
               value (e.g., http://www.w3.org/2001/XMLSchema-instance) and the latter being a
               pair, the first having the same value as the value of the xmlns attribute and the
               second having a value derived from the XSD_BASE_URL directive; e.g.,

                   <foo xmlns="http://example.com/dacs/v1.4"
                         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                         xsi:schemaLocation="http://example.com/dacs/v1.4
                         http://example.com/dacs/dtd-xsd/foo.xsd">

               If XSD_BASE_URL is not configured, only the default xmlns attribute is emitted.

   The Auth Clause
       Each Auth clause configures an authentication module. The Auth clause and its directives
       are described in dacs_authenticate(8)[27].

       Note that the order of these clauses is significant - they are processed in the order in
       which they appear in the applicable configuration section.

   The Roles Clause
       Each Roles clause configures a roles module.  Roles clause and its directives are
       described in dacs_authenticate(8)[174].

       The clauses are processed in the order in which they appear. Authentication modules may
       return roles, to improve efficiency, but roles are usually obtained through a roles
       module. Roles modules are processed only if authentication is successful.

   The Transfer Clause
       Each Transfer clause configures dacs_auth_transfer(8)[29] for importing from one or more
       federations specified within the clause. The clauses are processed in the order in which
       they appear. No clause should apply to more than one initial federation, although this is
       not enforced.

       Each Transfer element has an id attribute. Its value is merely a label (an alphabetic
       followed by zero or more alphanumerics, hyphens, and underscores) that allows the clause
       to be referenced; the syntax is the same as that of a groupname[80]. The attribute values
       must be unique (case-sensitively).  Transfer clause directives are described in
       dacs_auth_transfer(8)[29].

   Advanced Techniques
       Configuration processing is ordinarily quite straightforward, but to accommodate more
       complicated situations it also supports a few advanced techniques.

       Configuration Variables
           After configuration processing determines which directives have been overridden, those
           that are in effect have their right hand sides (which are expressions) evaluated.
           These expressions are usually simple strings but they can be any DACS expression.

               Tip
               When configuration processing begins, variables in the DACS and Args
               namespaces[14] can by referenced by configuration directives.

               Security
               The ability to reference an argument during configuration processing can be useful
               and powerful when used carefully but since argument values are completely in the
               hands of the user constructing a request, it is a potential security weakness,
               particularly in DACS deployments that are exposed to the Internet.

               For example, an argument might be missing or duplicated, accidentally have a
               problematic value (such as containing non-printable or otherwise invalid
               characters), or be specifically constructed in an attempt to misconfigure DACS to
               thwart security. For this reason, variables in the Args namespace should be
               referenced in configuration files only when specifically indicated in the
               documentation, or by advanced DACS administrators in appropriate circumstances and
               with caution.

           As each expression is evaluated to determine the value of the directive, a variable in
           the Conf namespace (see dacs.exprs(5)[14]) is created and assigned the value, and can
           then be referenced in subsequent expressions. Variables in this namespace can be
           referenced within access control rules, permitting rules to be written that depend on
           how the particular site, federation, and jurisdiction have been configured. In
           addition, during the remainder of the configuration processing stage, the variable's
           value can be modified, effectively changing the value associated with the directive.
           After completion of configuration processing, the variables in the Conf namespace
           become read-only. It is these variables that are displayed by the -vars option of
           dacsconf(1)[2].

           For example, if the directive

               FEDERATION_DOMAIN   "example.com"

           is in effect when directive evaluation begins, the variable ${Conf::FEDERATION_DOMAIN}
           will be created and assigned the value "example.com".

           Variables within the Conf namespace[14] can be created as needed within expressions
           (using the EVAL directive, for example). Care should be taken not to unintentionally
           modify the value of a DACS directive, however.

           A standard set of variables is always instantiated when available:

           APACHE_HOME
               The value of the corresponding build-time symbol

           CGI_SUFFIX
               The file name extension for CGI executables, specified at build-time

           DACS_CONF
               The full pathname for this jurisdiction's dacs.conf file

           DACS_CONF_SPEC
               The pathname specification template used for this jurisdiction's dacs.conf file

           DACS_HOME
               The value of the corresponding build-time symbol, from the path set by the
               --prefix flag or defaulting to /usr/local/dacs

                   Important
                   This directory should be writable only by an administrator.

           DACS_CGIBINDIR
               The value of the corresponding build-time symbol

           DACS_RELEASE
               The value of the the compile-time symbol DACS_VERSION_RELEASE

           DACS_BINDIR
               The location of the DACS bin directory

           DACS_SBINDIR
               The location of the DACS sbin directory

           DACS_SITE_CONF
               The full pathname for this jurisdiction's site.conf file , if any
                .RE

               DACS_SITE_CONF_SPEC
                   The pathname specification template used for this jurisdiction's site.conf
                   file, if any

               DACS_VERSION
                   The value of the compile-time symbol DACS_VERSION_NUMBER

               DOCUMENT_ROOT
                   Apache's DOCUMENT_ROOT environment variable

               EXE_SUFFIX
                   The file name extension for non-CGI executables

               FEDERATIONS_ROOT
                   The value of the corresponding build-time symbol

               HTTP_HOST
                   Apache's HTTP_HOST environment variable, obtained from the HTTP Host request
                   header

               JURISDICTION_URI
                   The initial part of the request URI, including scheme and port number, that
                   uniquely identifies the jurisdiction receiving the service request (also see
                   JURISDICTION_URI_PREFIX)

               JURISDICTION_URI_PREFIX
                   The URI prefix that uniquely identifies the jurisdiction receiving the service
                   request (also see JURISDICTION_URI)

               OPENSSL_PROG
                   The full pathname of the openssl command, if available

               SERVER_ADDR
                   Apache's SERVER_ADDR environment variable

               SERVER_NAME
                   Apache's SERVER_NAME environment variable

               SERVER_PORT
                   Apache's SERVER_PORT environment variable

               URI_SCHEME
                   Set to https if the service request came over SSL/TLS (HTTPS == "on"),
                   otherwise http

           Authentication and Roles
               This section unfortunately left blank.

SEE ALSO

       dacsconf(1)[2], dacs_conf(8)[3], dacs.exprs(5)[20]

BUGS

       There's no way to turn off inherited defaults in a jurisdiction section or Default
       section; i.e., one cannot turn off all Auth or handler directives for just one
       jurisdiction section.

AUTHOR

       Distributed Systems Software (http://www.dss.ca)

COPYING

       Copyright2003-2016 Distributed Systems Software. See the LICENSE[175] file that
       accompanies the distribution for licensing information.

NOTES

        1. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#key_concepts

        2. dacsconf(1)
           http://dacs.dss.ca/man/dacsconf.1.html

        3. dacs_conf(8)
           http://dacs.dss.ca/man/dacs_conf.8.html

        4. dacshttp(1)
           http://dacs.dss.ca/man/dacshttp.1.html

        5. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#dacsoptions

        6. dacs_acs(8)
           http://dacs.dss.ca/man/dacs_acs.8.html

        7. mod_auth_dacs
           http://dacs.dss.ca/man/mod_auth_dacs.html

        8. mod_vhost_alias
           http://httpd.apache.org/docs-2.2/mod/mod_vhost_alias.html

        9. LOG_FILE
           http://dacs.dss.ca/man/#LOG_FILE

       10. pathname()
           http://dacs.dss.ca/man/dacs.exprs.5.html#pathname

       11. Jurisdiction section's
           http://dacs.dss.ca/man/#jurisdiction_section

       12. Configuration.dtd
           http://dacs.dss.ca/man/../dtd-xsd/Configuration.dtd

       13. Stack category
           http://dacs.dss.ca/man/#directive_categories

       14. namespace
           http://dacs.dss.ca/man/dacs.exprs.5.html#variables

       15. EVAL directive
           http://dacs.dss.ca/man/#EVAL

       16. undef()
           http://dacs.dss.ca/man/dacs.exprs.5.html#undef

       17. modifier flag
           http://dacs.dss.ca/man/dacs.exprs.5.html#variable_modifiers

       18. ACS_ERROR_HANDLER
           http://dacs.dss.ca/man/#ACS_ERROR_HANDLER

       19. effective jurisdictional URIs
           http://dacs.dss.ca/man/#jurisdiction_section_uri

       20. expression
           http://dacs.dss.ca/man/dacs.exprs.5.html

       21. configuration variables
           http://dacs.dss.ca/man/#config-vars

       22. example configuration
           http://dacs.dss.ca/man/#example_dacs.conf

       23. Jurisdiction Selection by URI
           http://dacs.dss.ca/man/#selection_by_uri

       24. string interpolation
           http://dacs.dss.ca/man/#interpolation

       25. access control rules
           http://dacs.dss.ca/man/dacs.acls.5.html

       26. INIT*
           http://dacs.dss.ca/man/dacs_authenticate.8.html#INIT*

       27. Auth clause
           http://dacs.dss.ca/man/dacs_authenticate.8.html#auth_clause

       28. section merging
           http://dacs.dss.ca/man/#merging

       29. dacs_auth_transfer(8)
           http://dacs.dss.ca/man/dacs_auth_transfer.8.html

       30. Authorization Caching
           http://dacs.dss.ca/man/dacs_acs.8.html#authorization_caching

       31. dacscookie(1)
           http://dacs.dss.ca/man/dacscookie.1.html

       32. dacsauth(1)
           http://dacs.dss.ca/man/dacsauth.1.html

       33. dacs_signout(8)
           http://dacs.dss.ca/man/dacs_signout.8.html

       34. The DACS_APPROVAL environment variable
           http://dacs.dss.ca/man/dacs_acs.8.html#dacs_approval

       35. description of the ErrorDocument directive
           http://httpd.apache.org/docs-2.2/mod/core.html#errordocument

       36. redirect()
           http://dacs.dss.ca/man/dacs.exprs.5.html#redirect

       37. access control rules
           http://dacs.dss.ca/man/dacs.acls.5.html#elements

       38. dacs_admin()
           http://dacs.dss.ca/man/dacs.exprs.5.html#dacs_admin

       39. ADMIN_IDENTITY
           http://dacs.dss.ca/man/#ADMIN_IDENTITY

       40. Bug 3641
           http://issues.apache.org/bugzilla/show_bug.cgi?id=36411

       41. Bug 42430
           http://issues.apache.org/bugzilla/show_bug.cgi?id=42430

       42. dacs_select_credentials(8)
           http://dacs.dss.ca/man/dacs_select_credentials.8.html

       43. ACS_TRACK_ACTIVITY
           http://dacs.dss.ca/man/#ACS_TRACK_ACTIVITY

       44. SetDACSAuthPostBuffer
           http://dacs.dss.ca/man/mod_auth_dacs.html#SetDACSAuthPostBuffer

       45. SERVICE_ARGS_TRUNCATED
           http://dacs.dss.ca/man/dacs_acs.8.html#SERVICE_ARGS_TRUNCATED

       46. HTTP_AUTH
           http://dacs.dss.ca/man/#HTTP_AUTH

       47. syntactically valid username
           http://dacs.dss.ca/man/dacs.1.html#dacs_identity

       48. current jurisdiction
           http://dacs.dss.ca/man/dacs.1.html#current_jurisdiction

       49. ACS_AUTHENTICATED_ONLY
           http://dacs.dss.ca/man/#ACS_AUTHENTICATED_ONLY

       50. dacs_authenticate(8)
           http://dacs.dss.ca/man/dacs_authenticate.8.html#Roles

       51. DACS_ACS
           http://dacs.dss.ca/man/dacs_acs.8.html#dacs_acs_argument

       52. dacs_authenticate(8)
           http://dacs.dss.ca/man/dacs_authenticate.8.html

       53. on_success()
           http://dacs.dss.ca/man/dacs.exprs.5.html#on_success

       54. counter
           http://dacs.dss.ca/man/dacs.exprs.5.html#counter

       55. current federation
           http://dacs.dss.ca/man/dacs.1.html#current_federation

       56. ACS_INACTIVITY_LIMIT_SECS
           http://dacs.dss.ca/man/#ACS_INACTIVITY_LIMIT_SECS

       57. FEDERATION_NAME
           http://dacs.dss.ca/man/#FEDERATION_NAME

       58. NAME_COMPARE
           http://dacs.dss.ca/man/#NAME_COMPARE

       59. auth_reply.dtd
           http://dacs.dss.ca/man/../dtd-xsd/auth_reply.dtd

       60. dacs_auth_reply.dtd
           http://dacs.dss.ca/man/../dtd-xsd/dacs_auth_reply.dtd

       61. AUTH_ERROR_HANDLER
           http://dacs.dss.ca/man/#AUTH_ERROR_HANDLER

       62. cookie name
           http://dacs.dss.ca/man/dacs_authenticate.8.html#credentials

       63. dacs_auth_agent(8)
           http://dacs.dss.ca/man/dacs_auth_agent.8.html

       64. ACS_CREDENTIALS_LIMIT
           http://dacs.dss.ca/man/#ACS_CREDENTIALS_LIMIT

       65. AUTH_SUCCESS_HANDLER
           http://dacs.dss.ca/man/#AUTH_SUCCESS_HANDLER

       66. mitigate the risk of information disclosure with a cross-site scripting (XSS) attack
           http://msdn.microsoft.com/en-us/library/ms533046%28VS.85%29.aspx

       67. are known
           http://www.webappsec.org/lists/websecurity/archive/2006-05/msg00025.html

       68. a particular syntax
           http://dacs.dss.ca/man/dacs_authenticate.8.html#cookie-name-syntax

       69. COOKIE_SYNTAX
           http://dacs.dss.ca/man/dacs_authenticate.8.html#COOKIE_SYNTAX

       70. Netscape HTTP Cookies Specification
           http://web.archive.org/web/20070805052634/http://wp.netscape.com/newsref/std/cookie_spec.html

       71. RFC 2965
           http://www.rfc-editor.org/rfc/rfc2965.txt

       72. RFC 6265
           http://www.rfc-editor.org/rfc/rfc6265.txt

       73. dacs.install(7)
           http://dacs.dss.ca/man/dacs.install.7.html

       74. FORMAT web service argument
           http://dacs.dss.ca/man/dacs.services.8.html#FORMAT

       75. Advanced Techniques
           http://dacs.dss.ca/man/#advanced

       76. RFC 1035
           http://www.rfc-editor.org/rfc/rfc1035.txt

       77. dacs.groups(5)
           http://dacs.dss.ca/man/dacs.groups.5.html#group_syntax

       78. dacs.conf(5)
           http://dacs.dss.ca/man/dacs.conf.5.html#jurisdiction_section_overview

       79. JURISDICTION_NAME
           http://dacs.dss.ca/man/#JURISDICTION_NAME

       80. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#naming

       81. RFC 2617
           http://www.rfc-editor.org/rfc/rfc2617.txt

       82. HTTP Authentication
           http://dacs.dss.ca/man/dacs_acs.8.html#http_authentication

       83. HTTP_AUTH_ENABLE
           http://dacs.dss.ca/man/#HTTP_AUTH_ENABLE

       84. ACS_PRE_AUTH
           http://dacs.dss.ca/man/#ACS_PRE_AUTH

       85. see below
           http://dacs.dss.ca/man/#http_auth_syn2

       86. authentication styles
           http://dacs.dss.ca/man/dacs_authenticate.8.html#STYLE

       87. chmod(2)
           http://www.freebsd.org/cgi/man.cgi?query=chmod&apropos=0&esektion=2&emanpath=FreeBSD+10.3-RELEASE&format=html

       88. dacs_prenv(8)
           http://dacs.dss.ca/man/dacs_prenv.8.html

       89. dacsexpr(1)
           http://dacs.dss.ca/man/dacsexpr.1.html

       90. encode()
           http://dacs.dss.ca/man/dacs.exprs.5.html#encode

       91. LDAP authentication
           http://dacs.dss.ca/man/dacs_authenticate.8.html#local_ldap_authenticate

       92. dacs_current_credentials(8)
           http://dacs.dss.ca/man/dacs_current_credentials.8.html

       93. regex(3)
           http://www.freebsd.org/cgi/man.cgi?query=regex&apropos=0&esektion=3&emanpath=FreeBSD+10.3-RELEASE&format=html

       94. dacs_sts(8)
           http://dacs.dss.ca/man/dacs_sts.8.html

       95. dacs_managed_infocard(8)
           http://dacs.dss.ca/man/dacs_managed_infocard.8.html

       96. XML Schema Part 2: Datatypes Second Edition
           http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/datatypes.html#dateTime

       97. INFOCARD_CARD_LIFETIME_SECS
           http://dacs.dss.ca/man/#INFOCARD_CARD_LIFETIME_SECS

       98. VFS URI
           http://dacs.dss.ca/man/#VFS

       99. CARD_IMAGE_URL
           http://dacs.dss.ca/man/dacs_managed_infocard.8.html#CARD_IMAGE_URL

       00. INFOCARD_CARD_DATETIME_EXPIRES
           http://dacs.dss.ca/man/#INFOCARD_CARD_DATETIME_EXPIRES

       01. INFOCARD_CARDID_BASE_URL
           http://dacs.dss.ca/man/#INFOCARD_CARDID_BASE_URL

       02. INFOCARD_CARD_OUTPUTDIR
           http://dacs.dss.ca/man/#INFOCARD_CARD_OUTPUTDIR

       03. INFOCARD_CARDID_SUFFIX
           http://dacs.dss.ca/man/#INFOCARD_CARDID_SUFFIX

       04. RFC 2396
           http://www.rfc-editor.org/rfc/rfc2396.txt

       05. dacs_infocard(8)
           http://dacs.dss.ca/man/dacs_infocard.8.html

       06. PASSWORD_DIGEST
           http://dacs.dss.ca/man/#PASSWORD_DIGEST

       07. INFOCARD_IP_PRIVACY_URL
           http://dacs.dss.ca/man/#INFOCARD_IP_PRIVACY_URL

       08. dacs_mex(8)
           http://dacs.dss.ca/man/dacs_mex.8.html

       09. INFOCARD_STS_PASSWORD_METHOD
           http://dacs.dss.ca/man/#INFOCARD_STS_PASSWORD_METHOD

       10. INFOCARD_STS_CERTFILE
           http://dacs.dss.ca/man/#INFOCARD_STS_CERTFILE

       11. dacsinfocard(1)
           http://dacs.dss.ca/man/dacsinfocard.1.html

       12. local_infocard_authenticate
           http://dacs.dss.ca/man/dacs_authenticate.8.html#local_infocard_authenticate

       13. INFOCARD_STS_KEYFILE_PASSWORD
           http://dacs.dss.ca/man/#INFOCARD_STS_KEYFILE_PASSWORD

       14. INFOCARD_STS_KEYFILE
           http://dacs.dss.ca/man/#INFOCARD_STS_KEYFILE

       15. INFOCARD_REQUIRE_APPLIES_TO
           http://dacs.dss.ca/man/#INFOCARD_REQUIRE_APPLIES_TO

       16. INFOCARD_AUDIENCE
           http://dacs.dss.ca/man/#INFOCARD_AUDIENCE

       17. wildcard certificate
           http://wiki.cacert.org/wiki/WildcardCertificates

       18. syslog(3)
           http://www.freebsd.org/cgi/man.cgi?query=syslog&apropos=0&sektion=3&manpath=FreeBSD+10.3-RELEASE&format=html

       19. LOG_LEVEL
           http://dacs.dss.ca/man/#LOG_LEVEL

       20. regex(3)
           http://www.freebsd.org/cgi/man.cgi?query=regex&apropos=0&sektion=3&manpath=FreeBSD+10.3-RELEASE&format=html

       21. print()
           http://dacs.dss.ca/man/dacs.exprs.5.html#print

       22. printf()
           http://dacs.dss.ca/man/dacs.exprs.5.html#printf

       23. LOG_SENSITIVE
           http://dacs.dss.ca/man/#LOG_SENSITIVE

       24. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#logging

       25. diff(1)
           http://www.freebsd.org/cgi/man.cgi?query=diff&apropos=0&sektion=1&manpath=FreeBSD+10.3-RELEASE&format=html

       26. sed(1)
           http://www.freebsd.org/cgi/man.cgi?query=sed&apropos=0&sektion=1&manpath=FreeBSD+10.3-RELEASE&format=html

       27. LOG_FILTER
           http://dacs.dss.ca/man/#LOG_FILTER

       28. --enable-hush-startup-logging
           http://dacs.dss.ca/man/dacs.install.7.html#build_flag_--enable-hush-startup-logging

       29. debug_dacs
           http://dacs.dss.ca/man/dacs_acs.8.html#debug_dacs

       30. mod_log_config
           http://httpd.apache.org/docs/2.2/mod/mod_log_config.html

       31. dacs_notices(8)
           http://dacs.dss.ca/man/dacs_notices.8.html

       32. Secure Mode
           http://dacs.dss.ca/man/dacs_notices.8.html#secure_mode

       33. local_pam_authenticate
           http://dacs.dss.ca/man/dacs_authenticate.8.html#local_pam_authenticate

       34. pamd(8)
           http://dacs.dss.ca/man/pamd.8.html

       35. dacs_passwd(8)
           http://dacs.dss.ca/man/dacs_passwd.8.html

       36. dacspasswd(1)
           http://dacs.dss.ca/man/dacspasswd.1.html

       37. dacstoken(1)
           http://dacs.dss.ca/man/dacstoken.1.html

       38. Web Service Arguments
           http://dacs.dss.ca/man/dacs_authenticate.8.html#web_service_arguments

       39. PASSWORD_AUDIT
           http://dacs.dss.ca/man/dacs_authenticate.8.html#PASSWORD_AUDIT

       40. ispunct(3)
           http://www.freebsd.org/cgi/man.cgi?query=ispunct&apropos=0&sektion=3&manpath=FreeBSD+10.3-RELEASE&format=html

       41. dacs_token(8)
           http://dacs.dss.ca/man/dacs_token.8.html

       42. dacs_admin(8)
           http://dacs.dss.ca/man/dacs_admin.8.html

       43. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#digests-arg

       44. crypt(3)
           http://www.freebsd.org/cgi/man.cgi?query=crypt&apropos=0&sektion=3&manpath=FreeBSD+10.3-RELEASE&format=html

       45. MD5 function
           http://www.rfc-editor.org/rfc/rfc1321.txt

       46. FIPS 180-4
           http://csrc.nist.gov/publications/fips/fips180-4/fips-180-4.pdf

       47. FIPS PUB 202, August/2015
           http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf

       48. Argon2
           https://en.wikipedia.org/wiki/Argon2

       49. RFC 2898
           http://www.rfc-editor.org/rfc/rfc2898.txt

       50. argon2()
           http://dacs.dss.ca/man/dacs.exprs.5.html#argon2

       51. pbkdf2()
           http://dacs.dss.ca/man/dacs.exprs.5.html#pbkdf2

       52. scrypt()
           http://dacs.dss.ca/man/dacs.exprs.5.html#scrypt

       53. Rlink
           http://dacs.dss.ca/man/dacs_acs.8.html#rlinks

       54. VFS specification
           http://dacs.dss.ca/man/dacs.conf.5.html#VFS

       55. sslclient(1)
           http://dacs.dss.ca/man/sslclient.1.html

       56. DACS-Status-Line
           http://dacs.dss.ca/man/dacs_acs.8.html#dacs_status_line

       57. DACS_HOME
           http://dacs.dss.ca/man/#var_dacs_home

       58. role descriptor string
           http://dacs.dss.ca/man/dacs.1.html#roles

       59. user()
           http://dacs.dss.ca/man/dacs.exprs.5.html#user

       60. dacs_uproxy(8)
           http://dacs.dss.ca/man/dacs_uproxy.8.html

       61. from()
           http://dacs.dss.ca/man/dacs.exprs.5.html#from

       62. dacs.vfs(5)
           http://dacs.dss.ca/man/dacs.vfs.5.html

       63. dacsvfs(1)
           http://dacs.dss.ca/man/dacsvfs.1.html

       64. RFC 3986
           http://www.rfc-editor.org/rfc/rfc3986.txt

       65. dacs(1)
           http://dacs.dss.ca/man/dacs.1.html#gloss_item_type

       66. dacskey(1)
           http://dacs.dss.ca/man/dacskey.1.html

       67. get()
           http://dacs.dss.ca/man/dacs.exprs.5.html#get

       68. Berkeley DB
           http://www.oracle.com/us/products/database/berkeley-db/overview/index.html

       69. dbm(3)
           http://www.freebsd.org/cgi/man.cgi?query=dbm&apropos=0&sektion=3&manpath=FreeBSD+10.3-RELEASE&format=html

       70. GNU gdbm
           http://www.gnu.org/software/gdbm/gdbm.html

       71. SQLite
           http://www.sqlite.org

       72. dacs_vfs(8)
           http://dacs.dss.ca/man/dacs_vfs.8.html

       73. local_passwd_authenticate
           http://dacs.dss.ca/man/dacs_authenticate.8.html#local_passwd_authenticate

       74. dacs_authenticate(8)
           http://dacs.dss.ca/man/dacs_authenticate.8.html#roles_clause

       75. LICENSE
           http://dacs.dss.ca/man/../misc/LICENSE