Ubuntu Manpage: sane-fujitsu - SANE backend for Fujitsu flatbed and ADF scanners

Provided by: libsane-common_1.0.27-1~experimental3ubuntu2.4_all

NAME

       sane-fujitsu - SANE backend for Fujitsu flatbed and ADF scanners

DESCRIPTION

       The  sane-fujitsu  library  implements  a SANE (Scanner Access Now Easy) backend which provides access to
       most Fujitsu flatbed and ADF scanners.

       This document describes backend version 133, which shipped with SANE 1.0.26.

SUPPORTED HARDWARE

       This version supports every known model which  speaks  the  Fujitsu  SCSI  and  SCSI-over-USB  protocols.
       Specifically,  the  SCSI  M309x  and M409x series, the SCSI fi-series, most of the USB fi-series, the USB
       ScanSnap S5xx/S15xx, and the USB iX1xx/5xx  series  scanners  are  supported.  Please  see  the  list  at
       http://www.sane-project.org/sane-supported-devices.html for details.

       This  backend  may  support other Fujitsu scanners. The best way to determine level of support is to test
       the scanner directly, or to collect a trace of the windows driver in action.  Please contact  the  author
       for help or with test results.

UNSUPPORTED HARDWARE

       The  following  scanners  are known NOT to work with this backend, either because they have a non-fujitsu
       chipset, or an unsupported interface type. Some of these scanners may be supported by another backend.

              --------------------------------------
              SCSI:        SERIAL:      USB:
              ------------ ------------ ------------
              ScanStation  M3093E/DE/EX fi-4110EOX/2
              ScanPartner  M3096EX      fi-4010CU
              SP-Jr        M3097E+/DE   S300/S300M
              SP-10/10C    M3099A/EH/EX S1300/S1100
              SP-15C/300C               fi-60F
              SP-600C/620C              fi-5015C
                                        SP-2x/3x

OPTIONS

Effort has been made to expose all hardware options, including:

source s
Selects the source for the scan. Options may include "Flatbed", "ADF Front", "ADF Back", "ADF
Duplex".

mode m
Selects the mode for the scan. Options may include "Lineart", "Halftone", "Gray", and "Color".

resolution, y-resolution
Controls scan resolution. Setting --resolution also sets --y-resolution, though this behavior is
overridden by some frontends.

tl-x, tl-y, br-x, br-y
Sets scan area upper left and lower right coordinates. These are renamed t, l, x, y by some
frontends.

page-width, page-height
Sets paper size. Used by scanner to determine centering of scan coordinates when using ADF and to
detect double feed errors.

Other options will be available based on the capabilities of the scanner: machines with IPC or DTC will
have additional enhancement options, those with CMP will have compression options, those with a printer
will have a group of endorser options.

Additionally, several 'software' options are exposed by the backend. These are reimplementations of
features provided natively by larger scanners, but running on the host computer. This enables smaller
machines to have similar capabilities. Please note that these features are somewhat simplistic, and may
not perform as well as the native implementations. Note also that these features all require that the
driver cache the entire image in memory. This will almost certainly result in a reduction of scanning
speed.

Use 'scanimage --help' to get a list, but be aware that some options may be settable only when another
option has been set, and that advanced options may be hidden by some frontend programs.

CONFIGURATION FILE

The configuration file "fujitsu.conf" is used to tell the backend how to look for scanners, and provide
options controlling the operation of the backend. This file is read each time the frontend asks the
backend for a list of scanners, generally only when the frontend starts. If the configuration file is
missing, the backend will be unable to locate any scanners.

Scanners can be specified in the configuration file in 4 ways:

"scsi FUJITSU"
Requests backend to search all scsi busses in the system for a device which reports itself to be a
scanner made by 'FUJITSU'.

"scsi /dev/sg0" (or other scsi device file)
Requests backend to open the named scsi device. Only useful if you have multiple compatible
scanners connected to your system, and need to specify one. Probably should not be used with the
other "scsi" line above.

"usb 0x04c5 0x1042" (or other vendor/product ids)
Requests backend to search all usb busses in the system for a device which uses that vendor and
product id. The device will then be queried to determine if it is a Fujitsu scanner.

"usb /dev/usb/scanner0" (or other device file)
Some systems use a kernel driver to access usb scanners. This method is untested.

The only configuration option supported is "buffer-size=xxx", allowing you to set the number of bytes in
the data buffer to something other than the compiled-in default, 65536 (64K). Some users report that
their scanner will "hang" mid-page, or fail to transmit the image if the buffer is not large enough.

Note: This option may appear multiple times in the configuration file. It only applies to scanners
discovered by 'scsi/usb' lines that follow this option.

Note: The backend does not place an upper bound on this value, as some users required it to be quite
large. Values above the default are not recommended, and may crash your OS or lockup your scsi card
driver. You have been warned.

ENVIRONMENT

       The backend uses a single environment variable, SANE_DEBUG_FUJITSU, which  enables  debugging  output  to
       stderr. Valid values are:

              5  Errors
              10 Function trace
              15 Function detail
              20 Option commands
              25 SCSI/USB trace
              30 SCSI/USB writes
              31 SCSI/USB reads
              35 Useless noise

KNOWN ISSUES

       Flatbed units may fail to scan at maximum area, particularly at high resolution.

       Any  model  that  does not support VPD during inquiry will not function until an override is added to the
       backend.

       CCITT Fax compression used by older scanners is not supported.

       JPEG output is supported by the backend, but not by the SANE protocol, so is disabled in this release. It
       can be enabled if you rebuild from source.

CREDITS

       m3091 backend: Frederik Ramm <frederik a t remote d o t org>
       m3096g backend: Randolph Bentson <bentson a t holmsjoen d o t com>
         (with credit to the unnamed author of the coolscan driver)
       fujitsu backend, m3093, fi-4340C, ipc, cmp, long-time maintainer:
         Oliver Schirrmeister <oschirr a t abm d o t de>
       m3092: Mario Goppold <mgoppold a t tbzpariv d o t tcc-chemnitz dot de>
       fi-4220C and basic USB support: Ron Cemer <ron a t roncemer d o t com>
       fi-4120, fi-series color, backend re-write, jpeg, current maintainer:
         m. allan noah: <kitno455 a t gmail d o t com>

       JPEG output and low memory usage support funded by:
         Archivista GmbH
         www.archivista.ch

       Endorser support funded by:
         O A S Oilfield Accounting Service Ltd
         1500, 840 - 7th Avenue S.W.
         Calgary, Alberta
         T2P 3G2 Canada
         1-403-263-2600
         www.oas.ca

       Automatic length detection support funded by:
         Martin G. Miller
         mgmiller at optonline.net

       Hardware donated, software image enhancement and fi-6/7xxx support funded by:
         Fujitsu Computer Products of America, Inc.
         www.fcpa.com

       iX500 support funded by:
         Prefix Computer Services
         www.prefixservice.com

AUTHOR

       m. allan noah: <kitno455 a t gmail d o t com>

@PACKAGEVERSION@                                   08 Apr 2017                                   sane-fujitsu(5)