Ubuntu Manpage: sane-gt68xx - SANE backend for GT-68XX based USB flatbed scanners

Provided by: libsane-common_1.0.27-1~experimental3ubuntu2.4_all

NAME

       sane-gt68xx - SANE backend for GT-68XX based USB flatbed scanners

DESCRIPTION

       The  sane-gt68xx  library implements a SANE (Scanner Access Now Easy) backend that provides access to USB
       flatbed scanners based on the Grandtech GT-6801 and GT-6816 chips.  A list of supported scanners  can  be
       found on the gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/.

       This  is  BETA software. Especially if you test new or untested scanners, keep your hand at the scanner's
       plug and unplug it, if the head bumps at the end of the scan area.

       If you own a scanner other than the ones listed on the gt68xx homepage  that  works  with  this  backend,
       please let me know this by sending the scanner's exact model name and the USB vendor and device ids (e.g.
       from sane-find-scanner or syslog) to me. Even if the scanner's name is only slightly different  from  the
       models already listed as supported, please let me know.

       If  you own a scanner that isn't detected by the gt68xx backend but has a GT-6801 or GT-6816 chipset, you
       can   try   to   add   it   to   the   backend.   Have   a   look   at   the    following    web    page:
       http://www.meier-geinitz.de/sane/gt68xx-backend/adding.html

LIBUSB ISSUES

       Please  use  libusb-0.1.8 or later. Without libusb or with older libusb versions all kinds of trouble can
       be expected. The scanner should be found  by  sane-find-scanner  without  further  actions.  For  setting
       permissions and general USB information looks at sane-usb(5).

FIRMWARE FILE

       You  need a firmware file for your scanner. That's a small file containing software that will be uploaded
       to the scanner's memory. It's usually named *.usb, e.g.  PS1fw.usb.  It comes on the installation CD that
       was  provided  by  the  manufacturer, but it may be packaged together with the installation program in an
       .exe file. For Mustek scanners, the file can be downloaded from the gt68xx backend  homepage.  For  other
       scanners,  check  the  CD  for  .usb  files.  If  you only find *.cab files, try cabextract to unpack. If
       everything else fails, you must install the Windows driver and get the firmware from  there  (usually  in
       the  windows/system  or  system32 directories). Put that firmware file into @DATADIR@/sane/gt68xx/.  Make
       sure that it's readable by everyone.

CONFIGURATION

The contents of the gt68xx.conf file is a list of usb lines containing vendor and product ids that
correspond to USB scanners. The file can also contain option lines. Empty lines and lines starting with
a hash mark (#) are ignored. The scanners are autodetected by usb vendor_id product_id statements which
are already included into gt68xx.conf. "vendor_id" and "product_id" are hexadecimal numbers that
identify the scanner.

The override, firmware, vendor, model, and afe options must be placed after the usb line they refer to.

Option override is used to override the default model parameters. That's necessary for some scanners that
use the same vendor/product ids but are different. For these scanners there are already commented out
override lines in the configuration file. override mustek-scanexpress-1200-ub-plus is necessary for the
Mustek Scanexpress 1200 UB Plus, the Medion/Lifetec/Tevion LT 9452, and the Trust Compact Scan USB 19200.
override artec-ultima-2000 is used for the Artec Ultima 2000, the Boeder SmartScan Slim Edition, the
Medion/ Lifetec/ Tevion/ Cytron MD/LT 9385, the Medion/ Lifetec/ Tevion MD 9458, and the Trust Flat Scan
USB 19200. override mustek-bearpaw-2400-cu is necessary for the Mustek BearPaw 2400 CU and the Fujitsu
1200CUS. The override option must be the first one after the usb line.

Option firmware selects the name and path of the firmware file. It's only necessary if the default (or
override) doesn't work. The default firmware directory is @DATADIR@/sane/gt68xx/. You may need to create
this directory. If you want to place the firmware files at a different path, use a firmware line.

The vendor and model options are not absolutely necessary but for convenience. Quite a lot of scanners
from different manufacturers share the same vendor/product ids so you can set the "correct" name here.

The afe option allows one to set custom offset and gain values for the Analog FrontEnd of the scanner.
This option can be either used to select the AFE values if automatic coarse calibration is disabled, or
to make automatic coarse calibration faster. For the latter usage, enable debug level 3 (see below), scan
an image and look for debug line string with "afe". Copy this line to gt68xx.conf. The option has six
parameters: red offset, red gain, green offset, green gain, blue offset, and blue gain.

A sample configuration file is shown below:

usb 0x05d8 0x4002
override "mustek-scanexpress-1200-ub-plus"
firmware "/opt/gt68xx/SBfw.usb"
vendor "Trust"
model "Compact Scan USB 19200"
afe 0x20 0x02 0x22 0x03 0x1f 0x04

FILES

       @CONFIGDIR@/gt68xx.conf
              The backend configuration file (see also description of SANE_CONFIG_DIR below).

       @LIBDIR@/libsane-gt68xx.a
              The static library implementing this backend.

       @LIBDIR@/libsane-gt68xx.so
              The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that  may  contain  the  configuration
              file.   Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated
              by a semi-colon (`;').  If this variable is not set, the configuration file  is  searched  in  two
              default  directories:  first, the current working directory (".") and then in @CONFIGDIR@.  If the
              value of the environment variable ends with the directory separator character,  then  the  default
              directories  are  searched  after  the  explicitly  specified  directories.   For example, setting
              SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "@CONFIGDIR@"
              being searched (in this order).

       SANE_DEBUG_GT68XX
              If  the  library  was  compiled with debug support enabled, this environment variable controls the
              debug level for this backend.  Higher debug levels increase the verbosity of the  output.  If  the
              debug  level  is set to 1 or higher, some debug options become available that are normally hidden.
              Handle them with care.

              Example: export SANE_DEBUG_GT68XX=4

AUTHOR

       Henning Meier-Geinitz <henning@meier-geinitz.de>
       The  original gt68xx driver was written by Sergey Vlasov, Andreas Nowack, and David Stevenson. Thanks for
       sending patches and answering questions to them and all the other contributors.

BUGS

       The first few lines of the image are garbage for the 2400 TA Plus.

       Interpolation should be used instead of just copying data, when the X- and Y-resolution differ.

       Support for buttons is missing.

       More    detailed    bug    information    is    available    at    the    gt68xx     backend     homepage
       http://www.meier-geinitz.de/sane/gt68xx-backend/.   Please  contact  us  if  you  find  a  bug or missing
       feature: <sane-devel@lists.alioth.debian.org>. Please send a debug log if  your  scanner  isn't  detected
       correctly (see SANE_DEBUG_GT68XX above).

@PACKAGEVERSION@                                   13 Jul 2008                                    sane-gt68xx(5)