Ubuntu Manpage: timidity.cfg - configure file of TiMidity++

NAME

       timidity.cfg - configure file of TiMidity++

DESCRIPTION

       The file timidity.cfg describes the runtime environments of timidity(1): that are the path
       of sound font, instruments configurations, etc.
       TiMidity++ looks for the configuration file timidity.cfg at startup, before processing any
       options.  If it can't be accessed, and the library path is changed with a -L option on the
       command line, then the default file will be sought again along the new library path  after
       processing  all  options,  unless  another  configuration  file  was specified with the -c
       option.
       Configuration files define the mapping of MIDI programs  to  instrument  files.   Multiple
       files may be specified, and statements in later ones will override earlier ones.

VARIABLE

       When  alphanumeric  and/or underscore `_' characters continue after dollar sign `$', it is
       considered that the string is a variable and the configuration file is  processed,  it  is
       transposed  to  another  string.   The  variable  name  can also be written with an inside
       parenthesis, in order to separate from a following character.

       For example:
       $variable
       ${variable} # same as $variable

       For the moment, the command which newly defines variables is not prepared.  The  undefined
       variable is transposed to null string.
       The variable defined as a regular variable is the next only one.

       $basedir
              Expresses  the directory where the configuration file exists.  By the command which
              mainly specifies a path, it uses in order to  specify  the  relative  path  from  a
              setting file.
              When a blank may be included in $basedir, it is necessary to bundle with "".

              For example:
              In /usr/local/share/timidity/timidity.cfg
              dir $basedir/inst # source /usr/local/share/timidity/inst

SYNTAX

The following statements can be used in a configuration file:

dir directory [...]
Adds directory to the search path in the same manner as the -L command line option.
Archive file are also allowed.

For example:
dir /usr/local/share/timidity/inst/foo.zip#
bank 0
0 bar.pat
1 baz.pat
2 zoo.pat

At first, dir specifies the archive name (followed by `#') for the path of patch
files same as directory name (in this case,
/usr/local/share/timidity/inst/foo.zip). TiMidity++ recognize the path is an
archive file if the expression has the last character `#', and also read the files
contained in this archive file. In previous example the patch files bar.pat,
baz.pat and zoo.pat contained in the foo.zip are also installed.

source file [...]
Reads another configuration file, then continues processing the current one.

progbase number
Sets and displays the tone number from number to number+128. If progbase 1 are
specified, tone numbers that follow are set and displayed as the numbers from 1 to
128.

bank [MapID1] number
Selects the tone bank to modify. Patch mappings that follow will affect this tone
bank. You can indicate specific map as a target, by specifying any of the
following to MapID1: gm2, sc55, sc88, sc88pro, sc8850, xg and xgsfx64.

drumset [MapID2] number
Selects the drum set to modify. Patch mappings that follow will affect this drum
set. You can indicate specific map as a target, by specifying any ofthe following
to MapID2: gm2drum, sc55drum, sc88drum, sc88prodrum, sc8850drum, xgdrum and
xgsfx126.

number file [options]
number %font file bank prog [key] [options]
number %sample file [options]
Specifies that the MIDI program number in the current tone bank or drum set should
be played using the patch file. If file is SoundFont, the specific instrument with
bank, prog, and key is taken out by the format of number %font. If file is linear
AIFF or WAV sample data, the MIDI program number is specified by the format of
number %sample. Options may be any of the following:

amp=amplification
Amplifies the instrument's volume by amplification percent. If no value is
specified, one will be automatically determined whenever the instrument is
loaded.

note=note
Specifies a fixed MIDI note to use when playing the instrument. If note is
0, the instrument will be played at whatever note the Note On event
triggering it has. For percussion instruments, if no value is specified in
the configuration file, the default in the patch file will be used.

pan=panning
Sets the instrument's default panning. panning may be left, right, center,
or an integer between -100 and 100, designating full left and full right
respectively. If no value is specified, the default in the patch file will
be used. Note that panning controls in MIDI files will override this value.

tune=tuning[,...]
Adjust the instrument's root frequency. tune=1 causes 1 half tone higher.
Since a fraction is available for tuning, it is possible to do fine tuning
such as tune=-0.2. When two or more sample data is contained, the arguments
after the second can specify different value respectively.

rate=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's ADSR rate. Each value may be an integer between 0 and
255. When you set only sustain rate,

6 GUS/hrpschrd.pat rate=::60

is available. When you set only attack time fasten,

6 GUS/hrpschrd.pat rate=255

is available. When two or more sample data is contained, the arguments
after the second can specify different value respectively.

offset=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's ADSR offset. Each value may be an integer between 0
and 255. The format is same as rate=.

keep={loop|env}
By default, percussion instruments have their loop and envelope information
stripped. Strangely shaped envelopes are removed automatically from melodic
instruments as well. keep= can be used to prevent stripping loop or
envelope data. For example, the Short and Long Whistle percussion
instruments (General Midi numbers 71 and 72) need to have `keep=loop
keep=env' specified in the configuration file.

strip={loop|env|tail}
Force removal of loop or envelope information from all patches in the
instrument, or strip the tail, i.e. all data after the loop. Some
third-party instruments have garbage after the loop, as evidenced by a
clicking noise whenever the instrument is played, so adding the strip=tail
option will markedly improve sound quality.

tremolo=sweep_increment:control_ratio:depth[,...]
Sets the instrument's tremolo. Each value may be an integer between 0 and
255. The format is similar to rate=. sweep_increment is the time until
tremolo is started. control_ratio is the rate changing amplification.
depth is the depth changing amplification.

vibrato=sweep_increment:phase_increment:depth[,...]
Sets the instrument's vibrato. Each value may be an integer between 0 and
255. The format is similar to rate=. sweep_increment is the time until
vibrato is started. phase_increment is the rate changing frequency. depth
is the depth changing frequency.

sclnote=note[,...]
Sets the instrument's standard note for scale tuning. For example,
sclnote=60 causes the center note C to be standard note for scale tuning.
When two or more sample data is contained, the arguments after the second
can specify different value respectively.

scltune=tune[,...]
Sets the instrument's scale tuning factor in cents. For example, scltune=50
causes the half tone steps as 50 cents. When two or more sample data is
contained, the arguments after the second can specify different value
respectively.

comm=comment
Specifies the comment comment.

modrate=attack:decay:sustain:release1:release2:release3[,...]
modoffset=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's behavior of change of modulation envelope. The format
and values are fundamentally same as volume envelope. Except for some
SoundFonts, even if it specifies only the option, nothing happens.

envkeyf=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's volume envelope key follow. Based on note=60, it
changes envelope time according to note. The unit is +-cent/key. For
example, envkeyf=100 means that the attack time will double when it goes up
by 1 octave. The format is similar to rate=. The parameter of decay and
sustain may be preset in some SoundFont.

envvelf=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's volume envelope velocity follow. Based on
velocity=64, it changes envelope time according to velocity. The unit is
+-cent/velocity. For example, envvelf=100 means that the attack time will
38 times at velocity=127. The format is similar to rate=. In the future,
the specification of this option may be changed.

modkeyf=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's modulation envelope key follow. Based on note=60, it
changes envelope time according to note. The unit is +-cent/key. For
example, modkeyf=100 means that the attack time will double when it goes up
by 1 octave. The format is similar to rate=. The parameter of decay and
sustain may be preset in some SoundFont.

modvelf=attack:decay:sustain:release1:release2:release3[,...]
Sets the instrument's modulation envelope velocity follow. Based on
velocity=64, it changes envelope time according to velocity. The unit is
+-cent/velocity. For example, modvelf=100 means that the attack time will
38 times at velocity=127. The format is similar to rate=. In the future,
the specification of this option may be changed.

trempitch=num[,...]
Sets the instrument's depth of changing pitch according to tremolo. The
effect itself is same as vibrato, it uses to operate in another system. The
unit is +-cent. The format is similar to rate=.

tremfc=num[,...]
Sets the instrument's depth of changing cutoff frequency according to
tremolo. It can express the so-called glowl effect. The unit, etc. are
same as trempitch=.

modpitch=num[,...]
Sets the instrument's depth of changing pitch according to modulation
envelope. It can temporarily express raising pitch only for the attack
stage. The unit, etc. are same as trempitch=.

modfc=num[,...]
Sets the instrument's depth of changing cutoff frequency according to
modulation envelope. The unit, etc. are same as trempitch=.

fc=num[,...]
Sets the instrument's standard of cutoff frequency. The unit is Hz. The
format is similar to rate=.

q=num[,...]
Sets the instrument's Q (resonance). The unit is cB. The format is similar
to rate=.

fckeyf=num
Sets the instrument's filter key follow. Based on note=60, it change cutoff
frequency according to note. The unit is +-cent/key. For example,
fckeyf=100 means that it changes same as pitch.

fcvelf=num
Sets the instrument's filter velocity follow. Based on velocity=127, it
changes cutoff frequency according to velocity. The unit is +-cent. In
SoundFont, -2400 is set up as a characteristic value.

qvelf=num
Sets the instrument's resonance velocity follow. Based on velocity=0, it
changes resonance according to velocity. The unit is +-cB.

default file
When MIDI program appears, which is not mapped to instrument file, this file is
pronounced as a substitute.

map MapID1 from-bank from-prog to-bank to-prog
The existing tone is assigned as a tone of GS/XG each map. gm2, sc55, sc88,
sc88pro, sc8850, xg and xgsfx64 can be specified to be MapID1.

map MapID2 from-drumset from-keynote to-drumset to-keynote
The existing drum is assigned as a drum of GS/XG each map. gm2drum, sc55drum,
sc88drum, sc88prodrum, sc8850drum, xgdrum and xgsfx126 can be specified to be
MapID2.

soundfont file [options]
Read the whole SoundFont. options may be any of the following:

order=number
Sets the order of searching for instrument. When order=0, first read
SoundFont, and then search for insufficient samples in GUS/patch. When
order=1, after reading GUS/patch, search for SoundFont.

amp=amplification
Sets the amplification of the whole SoundFont as amplification%. If the
value is not specified, it is set by 100%.

cutoff=number
Specifies whether LPF in SoundFont is enable (1) or disable (0). If the
value is not specified, it is considered to be enable.

reso=number
Specifies whether resonance in SoundFont is enable (1) or disable (0). If
the value is not specified, it is considered to be enable.

remove Cancels the target SoundFont from the memory.

font exclude bank [prog [key]]
Suppresses searching for SoundFont of bank, prog. If the sample is drumset, bank
is 128, drumset is prog, keynum is key.

font order number bank [prog [key]]
Sets the order of searching for instrument individually. The format is same as
font exclude.

The following statements are available only latest TiMidity++.

#extension altassign program1 program2 ...
Sets the alternate assign for drum set. For example, if you want to pronounce
Hi-Hat cymbals (note number 42, 44 and 46) in the drumset 0 exclusively to each
others, specify:

drumset 0
altassign 42 44 46

Note that alternate assign of drumset 0 is used by default.

#extension comm program comment
Specifies the comment comment for the tone number program. These comments are
displayed in the indicator line when TiMidity++ is booted with option -int, -iTt.

#extension timeout program second
Specifies the time-out value of the program. If any notes played with the tone
number program are suspended for more than second seconds, TiMidity++ kills the
notes.

#extension copydrumset drumset
Copies all settings of the drumset to the current drumset.

#extension copybank bank
Copies all settings of the bank to the current bank.

#extension copymap to-MapID from-MapID
Copies all settings of the banks defined for the map from-MapID to the map
to-MapID.

#extension HTTPproxy hostname:port
Specifies the proxy of the HTTP protocol. hostname and port are of the proxy
host's.

#extension FTPproxy hostname:port
Specifies the proxy of the FTP protocol. Same as HTTP.

#extension mailaddr your-mail-address
Specifies user's mail address. This address is sent to the FTP server if
TiMidity++ access any file via FTP.

#extension opt option
Sets the value of boot-time options.

#extension undef progno
Undefines the tone progno of current tone bank.

#extension legato progno {0|1}
Specifies whether legato is enable (1) or disable (0) on progno.

#extension level progno tva_level
Sets the standard value of changing amplification when processing Drum Instrument
TVA Level of NRPN. Unless Drum Instrument TVA Level is specified at playing, the
amplification is not influenced. progno can carry out package specification by `,'
and/or [start]-[end]. If start and end are omitted, they are assumed to be 0 and
127 respectively.

#extension damper progno {0|1}
Specifies whether redamper and half-damper are enable (1) or disable (0) on progno.

#extension playnote progno note
Sets the frequency of pronounce to note. If the frequency of pronounce is
specified by GS SysEx Play Note, the pitch is changed appropriately according to
the value. progno can carry out package specification by `,' and/or [start]-[end].
If start and end are omitted, they are assumed to be 0 and 127 respectively.

For example:
drumset 0
#extension playnote -37,39,44-46,55-60

#extension delaysend progno level
#extension chorussend progno level
#extension reverbsend progno level
Sets the send level when drum part effect is enable. All initial value are 127.
If one of delay, chorus and reverb is at least set up, the effect which is not set
as the tone will become the initial value 0. progno can carry out package
specification by `,' and/or [start]-[end]. If start and end are omitted, they are
assumed to be 0 and 127 respectively.

#extension rnddelay progno msec
For every pronunciation, it is random and less than a maximum of msec delay. The
distribution of random value is pink noise (1/f fluctuation) rather than a white
noise.

These #extension statements are beginning with character `#' that is the comment flag of
old TiMidity (version 0.2i or earlier). So these statements are treated as comment line.
The latest TiMidity++ treats #extension as white-space. So you can omit it.

If any file-name expression ended with character `|' (Ascii 0x7c), the file-name is
treated as command and outputs of the command are also examined as arguments of
statements.
source command| causes the output of command becomes the argument of source. It is
convenient to choose settings of TiMidity++ according to environment. In addition, if a
space enters on the way like command |, it will be divided at the time of setting file
reading, and will no longer be regarded as a command. This function is applicable to all
the places that can specify a file name.

timidity 'cat fild.mid|'

will read from the output of cat fild.mid.

FILES

       /etc/timidity/timidity.cfg

COPYRIGHT

       Copyright (C) 1999-2004 Masanao Izumo <iz@onicos.co.jp>
       Copyright (C) 1995 Tuukka Toivonen <tt@cgs.fi>

       The  original  version  was  developed by Tuukka Toivonen <tt@cgs.fi> until the release of
       TiMidity-0.2i.  His development was discontinued because of his being busy with work.

       This program is free software; you can redistribute it and/or modify it under the terms of
       the  GNU  General  Public  License  as  published  by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;
       without  even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if  not,  write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
       MA 02111-1307 USA

AVAILABILITY

       The latest release is available on the TiMidity++ Page,

       URL http://www.timidity.jp/