Provided by: sway_1.4-2_amd64 bug

NAME

       sway-input - input configuration file and commands

DESCRIPTION

       Sway allows for configuration of devices within the sway configuration file.  To obtain a
       list of available device identifiers, run swaymsg -t get_inputs.  Settings can also be
       applied to all input devices by using the wildcard, *, in place of <identifier> in the
       commands below. In addition, the settings can be applied to a type of device, by using
       type:<input_type> in place of <identifier>.

       Tip: If the configuration settings do not appear to be taking effect, you could try using
       * instead of <identifier>. If it works with the wildcard, try using a different identifier
       from swaymsg -t get_inputs until you find the correct input device.

       Current available input types are:

       •   touchpad
       •   pointer
       •   keyboard
       •   touch
       •   tablet_tool
       •   tablet_pad
       •   switch

       Note: The type configurations are applied as the devices appear and get applied on top of
       the existing device configurations.

INPUT COMMANDS

   KEYBOARD CONFIGURATION
       input <identifier> repeat_delay <milliseconds>
           Sets the amount of time a key must be held before it starts repeating.

       input <identifier> repeat_rate <characters per second>
           Sets the frequency of key repeats once the repeat_delay has passed.

       For more information on these xkb configuration options, see xkeyboard-config(7).

       input <identifier> xkb_file <file_name>
           Sets all xkb configurations from a complete .xkb file. This file can be dumped from
           xkbcomp $DISPLAY keymap.xkb. This setting overrides xkb_layout, xkb_model,
           xkb_options, xkb_rules, and xkb_variant settings.

       input <identifier> xkb_layout <layout_name>
           Sets the layout of the keyboard like us or de.

           Multiple layouts can be specified by separating them with commas.

       input <identifier> xkb_model <model_name>
           Sets the model of the keyboard. This has an influence for some extra keys your
           keyboard might have.

       input <identifier> xkb_options <options>
           Sets extra xkb configuration options for the keyboard.

           Multiple options can be specified by separating them with commas.

       input <identifier> xkb_rules <rules>
           Sets files of rules to be used for keyboard mapping composition.

       input <identifier> xkb_switch_layout <index>
           Changes the active keyboard layout index. This can be used when multiple layouts are
           configured with xkb_layout. A list of layouts you can switch between can be obtained
           with swaymsg -t get_inputs.

       input <identifier> xkb_variant <variant>
           Sets the variant of the keyboard like dvorak or colemak.

       The following commands may only be used in the configuration file.

       input <identifier> xkb_capslock enabled|disabled
           Initially enables or disables CapsLock on startup, the default is disabled.

       input <identifier> xkb_numlock enabled|disabled
           Initially enables or disables NumLock on startup, the default is disabled.

   MAPPING CONFIGURATION
       input <identifier> map_to_output <identifier>
           Maps inputs from this device to the specified output. Only meaningful if the device is
           a pointer, touch, or drawing tablet device.

       input <identifier> map_to_region <X> <Y> <width> <height>
           Maps inputs from this device to the specified region of the global output layout. Only
           meaningful if the device is a pointer, touch, or drawing tablet device.

       input <identifier> map_from_region <X1xY1> <X2xY2>
           Ignores inputs from this device that do not occur within the specified region. Can be
           in millimeters (e.g. 10x20mm 20x40mm) or in terms of 0..1 (e.g. 0.5x0.5 0.7x0.7). Not
           all devices support millimeters. Only meaningful if the device is not a keyboard and
           provides events in absolute terms (such as a drawing tablet or touch screen - most
           pointers provide events relative to the previous frame).

   LIBINPUT CONFIGURATION
       input <identifier> accel_profile adaptive|flat
           Sets the pointer acceleration profile for the specified input device.

       input <identifier> calibration_matrix <6 space-separated floating point values>
           Sets the calibration matrix.

       input <identifier> click_method none|button_areas|clickfinger
           Changes the click method for the specified device.

       input <identifier> drag enabled|disabled
           Enables or disables tap-and-drag for specified input device.

       input <identifier> drag_lock enabled|disabled
           Enables or disables drag lock for specified input device.

       input <identifier> dwt enabled|disabled
           Enables or disables disable-while-typing for the specified input device.

       input <identifier> events enabled|disabled|disabled_on_external_mouse|toggle [<toggle-
       modes>]
           Enables or disables send_events for specified input device. Disabling send_events
           disables the input device.

           The toggle option cannot be used in the config. If no toggle modes are listed, all
           supported modes for the device will be toggled through in the order:
           enabled,     disabled_on_external_mouse, disabled, (loop back). If toggle modes are
           listed, they will be cycled through, defaulting to the first mode listed if the
           current mode is not in the list. They will also not be checked to see if they are
           supported for the device and may fail.

       input <identifier> left_handed enabled|disabled
           Enables or disables left handed mode for specified input device.

       input <identifier> middle_emulation enabled|disabled
           Enables or disables middle click emulation.

       input <identifier> natural_scroll enabled|disabled
           Enables or disables natural (inverted) scrolling for the specified input device.

       input <identifier> pointer_accel [<-1|1>]
           Changes the pointer acceleration for the specified input device.

       input <identifier> scroll_button disable|button[1-3,8,9]|<event-code-or-name>
           Sets the button used for scroll_method on_button_down. The button can be given as an
           event name or code, which can be obtained from libinput debug-events, or as a x11
           mouse button (button[1-3,8,9]). If set to disable, it disables the scroll_method
           on_button_down.

       input <identifier> scroll_factor <floating point value>
           Changes the scroll factor for the specified input device. Scroll speed will be scaled
           by the given value, which must be non-negative.

       input <identifier> scroll_method none|two_finger|edge|on_button_down
           Changes the scroll method for the specified input device.

       input <identifier> tap enabled|disabled
           Enables or disables tap for specified input device.

       input <identifier> tap_button_map lrm|lmr
           Specifies which button mapping to use for tapping. lrm treats 1 finger as left click,
           2 fingers as right click, and 3 fingers as middle click. lmr treats 1 finger as left
           click, 2 fingers as middle click, and 3 fingers as right click.

   SEAT CONFIGURATION
       Configure options for multiseat mode.

       A seat is a collection of input devices that act independently of each other.  Seats are
       identified by name and the default seat is seat0 if no seats are configured. While sway is
       running, - (hyphen) can be used as an alias for the current seat. Each seat has an
       independent keyboard focus and a separate cursor that is controlled by the pointer devices
       of the seat. This is useful for multiple people using the desktop at the same time with
       their own devices (each sitting in their own "seat"). The wildcard character, *, can also
       be used in place of <identifier> to change settings for all seats.

       Tip: If the configuration settings do not appear to be taking effect, you could try using
       * instead of <identifier>. If it works with the wildcard, try using a different identifier
       from swaymsg -t get_seats until you find the correct seat.

       seat <name> attach <input_identifier>
           Attach an input device to this seat by its input identifier. A special value of "*"
           will attach all devices to the seat.

       seat <seat> cursor move|set <x> <y>
           Move specified seat's cursor relative to current position or wrap to absolute
           coordinates (with respect to the global coordinate space).  Specifying either value as
           0 will not update that coordinate.

       seat <seat> cursor press|release button[1-9]|<event-name-or-code>
           Simulate pressing (or releasing) the specified mouse button on the specified seat. The
           button can either be provided as a button event name or event code, which can be
           obtained from libinput debug-events, or as an x11 mouse button (button[1-9]). If using
           button[4-7], which map to axes, an axis event will be simulated, however press and
           release will be ignored and both will occur.

       seat <name> fallback true|false
           Set this seat as the fallback seat. A fallback seat will attach any device not
           explicitly attached to another seat (similar to a "default" seat).

       seat <name> hide_cursor <timeout>
           Hides the cursor image after the specified timeout (in milliseconds) has elapsed with
           no activity on that cursor. A timeout of 0 (default) disables hiding the cursor. The
           minimal timeout is 100 and any value less than that (aside from 0), will be increased
           to 100.

       seat <name> idle_inhibit <sources...>
           Sets the set of input event sources which can prevent the seat from becoming idle, as
           a space separated list of source names. Valid names are "keyboard", "pointer",
           "touchpad", "touch", "tablet_pad", "tablet_tool", and "switch". The default behavior
           is to prevent idle on any event.

       seat <name> idle_wake <sources...>
           Sets the set of input event sources which can wake the seat from its idle state, as a
           space separated list of source names. Valid names are "keyboard", "pointer",
           "touchpad", "touch", "tablet pad", "tablet tool", and "switch". The default behavior
           is to wake from idle on any event.

       seat <name> keyboard_grouping none|smart
           Set how the keyboards in the seat are grouped together. Currently, there are two
           options. none will disable all keyboard grouping. This will make it so each keyboard
           device has its own isolated state. smart will group the keyboards in the seat by their
           keymap and repeat info. This is useful for when the keyboard appears as multiple
           separate input devices.  In this mode, the effective layout is synced between the
           keyboards in the group. The default is smart. To restore the behavior of older
           versions of sway, use none.

       seat <name> pointer_constraint enable|disable|escape
           Enables or disables the ability for clients to capture the cursor (enabled by default)
           for the seat. This is primarily useful for video games. The "escape" command can be
           used at runtime to escape from a captured client.

       seat <name> xcursor_theme <theme> [<size>]
           Override the system default XCursor theme. The default seat's (seat0) theme is also
           used as the default cursor theme in XWayland, and exported through the XCURSOR_THEME
           and XCURSOR_SIZE environment variables.

SEE ALSO

       sway(5) sway-output(5) xkeyboard-config(7)

                                            2020-02-17                              sway-input(5)