Provided by: afio_2.5.1.20160103+gitc8e4317-2_amd64 
NAME
afio - manipulate archives and files
SYNOPSIS
... | afio -o [ options ] archive : write (create) archive
afio -i [ options ] archive : install (unpack) archive
afio -t [ options ] archive : list table-of-contents of archive
afio -r [ options ] archive : verify archive against filesystem
afio -p [ options ] directory [ ... ] : copy files
DESCRIPTION
Afio manipulates groups of files, copying them within the (collective) filesystem or between the
filesystem and an afio archive.
With -o, reads pathnames from the standard input and writes an archive.
With -t, reads an archive and writes a table-of-contents to the standard output.
With -i, installs the contents of an archive relative to the working directory.
With -p, reads pathnames from the standard input and copies the files to each directory. Cannot be
combined with the -Z option.
With -r, reads archive and verifies it against the filesystem. This is useful for verifying tape
archives, to ensure they have no bit errors. The verification compares file contents, but not permission
bits and non-file filesystem entities, so it cannot be used as a reliable tool to detect every possible
change made to a filesystem.
Creates missing directories as necessary, with permissions to match their parents.
Removes leading slashes from pathnames, making all paths relative to the current directory. This is a
safety feature to prevent inadvertent overwriting of system files when doing restores. To suppress this
safety feature, the -A option must be used while writing an archive, but also when reading (installing),
verifying, and cataloging an existing archive.
Supports compression while archiving, with the -Z option. Will compress individual files in the archive,
not the entire archive datastream, which makes afio compressed archives much more robust than `tar zc'
type archives.
Supports multi-volume archives during interactive operation (i.e., when /dev/tty is accessible and SIGINT
is not being ignored).
OPTIONS
-@ address Send email to address when a volume change (tape change, floppy change) is needed, and also
when the entire operation is complete. Uses sendmail(1) to send the mail.
-a Preserve the last access times (atimes) of the files read when making or verifying an
archive. Warning: if this option is used, afio will change the last inode changed times
(ctimes) of these files. Thus, this option cannot be used together with an incremental
backup scheme that relies on the ctimes being preserved.
-b size Read or write size-character archive blocks. Suffices of b, k, m and g denote multiples of
512, kilobytes, megabytes and gigabytes, respectively. Defaults to 5120 for compatibility
with cpio(1). In some cases, notably when using ftape with some tape drives, -b 10k is
needed for compatibility. Note that -b 10k is the default block size used by tar(1), so it
is usually a good choice if the tape setup is known to work with tar(1).
-c count Buffer count archive blocks between I/O operations. A large count is recommended for
efficient use with streaming magnetic tape drives, in order to reduce the number of tape
stops and restarts.
-d Don't create missing directories.
-e bound Pad the archive to a multiple of bound characters. Recognizes the same suffices as -s.
Defaults to 1x (the -b block size) for compatibility with cpio(1).
-f Spawn a child process to actually write to the archive; provides a clumsy form of double-
buffering. Requires -s for multi-volume archive support.
-g Change to input file directories. Avoids quadratic filesystem behavior with long similar
pathnames. Requires all absolute pathnames, including those for the -o archive and the -p
directories.
-h Follow symbolic links, treating them as ordinary files and directories.
-j Don't generate sparse filesystem blocks on restoring files. By default, afio creates sparse
filesystem blocks (with lseek(2)) when possible when restoring files from an archive, but
not if these files were stored in a compressed form. Unless stored in a compressed form,
sparse files are not archived efficiently: they will take space equal to the full file
length. (The sparse file handling in afio does not make much sense except in a historical
way.)
-k Rather than complaining about unrecognizable input, skip unreadable data (or partial file
contents) at the beginning of the archive file being read, and search for the next valid
archive header. This option is needed to deal with certain types of backup media damage.
It is also useful to support quick selective restores from multi-volume archives, or from
searchable block devices, if the volume or location of the file to be restored is known in
advance (see the -B option). If, for example, a selective restore is done with the fourth
volume of a multi-volume afio archive, then the -k option needs to be used, else afio will
complain about the input not being a well-formed archive.
-l With -o, write file contents with each hard link.
With -t, report hard links.
With -p, attempt to link files rather than copying them.
-m Mark output files with a common current timestamp (rather than with input file modification
times).
-n Protect newer existing files (comparing file modification times).
-s size Restrict each portion of a multi-volume archive to size characters. This option recognizes
the same size suffices as -b. Also, the suffix x denotes a multiple of the -b block size
(and must follow any -b specification). size can be a single size or a comma-seperated
list of sizes, for example '2m,5m,8m', to specify different sizes for the subsequent
volumes. If there are more volumes than sizes, the last specified size is used for all
remaining volumes. If this option is used, the special character sequences %V and %S in the
input/output filename or command string are replaced by the current volume number and volume
size. Use %% to produce a single % character. The -s option is useful with finite-length
devices which do not return short counts at end of media (sigh); output to magnetic tape
typically falls into this category. When an archive is being read or written, using -s
causes afio to prompt for the next volume if the specified volume length is reached. The -s
option will also cause afio to prompt if there is a premature EOF while reading the input.
The special case -s 0 will activate this prompting for the next volume on premature EOF
without setting a volume length. When writing an archive, afio will prompt for the next
volume on end-of-media, even without -s 0 being supplied, if the device is capable of
reporting end-of-media. If the volume size specified is not a multiple of the block size
set with the -b option, then afio(1) will silently round down the volume size to the nearest
multiple of the block size. This rounding down can be suppressed using the -9 option: if -9
is used, afio(1) will write a small block of data, smaller than the -b size, at the end of
the volume to completely fill it to the specified size. Some devices are not able to
handle such small block writes.
-u Report files with unseen links.
-v Verbose. Report pathnames (to stderr) as they are processed. When used with -t, gives an ls
-l style report (including link information) to stdout instead. When used twice (-vv) with
-o, gives an ls -l style report to stdout while writing the archive. (But this use of -vv
will not work if the archive is also being written to stdout.)
-w filename Treats each line in filename as an -y pattern, see -y.
-x Retain file ownership and setuid/setgid permissions. This is the default for the super-
user; he may use -X to override it.
-y pattern Restrict processing of files to names matching shell wildcard pattern pattern. Use this
flag once for each pattern to be recognized. With the possible exception of the presence of
a leading slash, the complete file name as appearing in the archive table-of-contents must
match the pattern, for example the file name 'etc/passwd' is matched by the pattern
'*passwd' but NOT by the pattern 'passwd'. See `man 7 glob' for more information on shell
wildcard pattern matching. The only difference with shell wildcard pattern matching is that
in afio the wildcards will also match '/' characters in file names. For example the pattern
'/usr/src/*' will match the file name '/usr/src/linux/Makefile', and any other file name
starting with '/usr/src'. Unless the -S option is given, any leading slash in the pattern or
the filename is ignored when matching, e.g. /etc/passwd will match etc/passwd. Use -Y to
supply patterns which are not to be processed. -Y overrides -y if a filename matches both.
See also -w and -W. See also the -7 option, which can be used to modify the meaning of -y,
-Y, -w, and -W when literal matching without wildcard processing is needed. Note: if afio
was compiled without using the GNU fnmatch library, then the full shell wildcard pattern
syntax cannot be used, and matching support is limited to patterns which are a full literal
file name and patterns which end in '*'.
-z Print execution statistics. This is meant for human consumption; use by other programs is
officially discouraged.
-A Do not turn absolute paths into relative paths. That is don't remove the leading slash.
Applies to the path names written in an archive, but also to the path names read out of an
archive during read (install), verify, and cataloging operations.
-B If the -v option is used, prints the byte offset of the start of each file in the archive.
If your tape drive can start reading at any position in an archive, the output of -B can be
useful for doing quick selective restores.
-D controlscript
Set the control script name to controlscript, see the section on control files below.
-E [+]filename | -E CS | -E CI
While creating an archive with compressed files using the -Z option, disable (attempts at)
compression for files with particular extensions. This option can be used to speed up the
creation of the archive, by making afio avoid trying to use gzip on files that contain
compressed data already. By default, if no specific -E option is given, all files with the
extensions .Z .z .gz .bz2 .tgz .arc .zip .rar .lzh .lha .uc2 .tpz .taz .tgz .rpm .zoo .deb
.gif .jpeg .jpg .tif .tiff .png .pdf .arj .avi .bgb .cab .cpn .hqx .jar .mp3 .mpg .mpq .pic
.pkz .psn .sit .ogg and .smk will not be compressed. Also by default, the file extension
matching is case-insensitive (to do the right thing with respect to MS-DOS based
filesystems). The -E filename form of this option will replace the default list of file
extensions by reading a new list of file extensions, separated by whitespace, from filename.
filename may contain comments preceded by a #. The extensions in filename should usually
all start with a dot, but they do not need to start with a dot, for example the extension
'tz' will match the file name 'hertz'. The -E +filename form (with a + sign in front of
filename) can be used to specify extensions in addition to the built-in default list,
instead of replacing the whole default list. To make extension matching case-sensitive, add
the special option form -E CS to the command line. The form -E CI invokes the (default)
case-insensitive comparison. See also the -6 option, which offers an additional way to
suppress compression.
-F This is a floppy disk, -s is required. Causes floppy writing in O_SYNC mode under Linux.
With kernel version 1.1.54 and above, this allows afio to detect some floppy errors while
writing. Uses shared memory if compiled in otherwise mallocs as needed (a 3b1 will not be
able to malloc the needed memory w/o shared memory), afio assumes either way you can
malloc/shmalloc a chunck of memory the size of one disk. Examples: 795k: 3.5" (720k drive),
316k (360k drive)
At the end of each disk this message occurs:
Ready for disk [#] on [output]
(remove the disk when the light goes out)
Type "go" (or "GO") when ready to proceed
(or "quit" to abort):
-G factor Specifies the gzip(1) compression speed factor, used when compressing files with the -Z
option. Factor 1 is the fastest with least compression, 9 is slowest with best compression.
The default value is 6. See also the gzip(1) manual page. If you have a slow machine or a
fast backup medium, you may want to specify a low value for factor to speed up the backup.
On large (>200k) files, -G 1 typically zips twice as fast as -G 6, while still achieving a
better result than compress(1). The zip speed for small files is mainly determined by the
invocation time of gzip (1), see the -T option.
-H promptscript
Specify a script to run, in stead of using the normal prompt, before advancing to the next
archive volume. The script will be run with the volume number, archive specification, and
the reason for changing to the next volume as arguments. The script should exit with 0 for
OK and 1 for abort, other exit codes will be treated as fatal errors. afio executes the
script by taking the promptscript string, appending the arguments, and then calling the
shell to execute the resulting command line. This means that a general-purpose prompt
script can be supplied with additional arguments, via the afio command line, by using a -H
option value like -H "generic_promptscript additional_arg_1 additional_arg_2".\
-J Try to continue after a media write error when doing a backup (normal behavior is to abort
with a fatal error).
-K Verify the output against what is in the memory copy of the disk (-F required). If the
writing or verifying fails the following menu pops up
[Writing/Verify] of disk [disk #] has FAILED!
Enter 1 to RETRY this disk
Enter 2 to REFORMAT this disk before a RETRY
Enter quit to ABORT this backup
Currently, afio will not process the answers 1 and 2 in the right way. The menu above is
only useful in that it signifies that something is wrong.
-L Log_file_path
Specify the name of the file to log errors and the final totals to.
-M size Specifies the maximum amount of memory to use for the temporary storage of compression
results when using the -Z option. The default is -M 250m (250 megabytes). If the compressed
version of a file is larger than this (or if afio runs out of virtual memory), gzip(1) is
run twice of the file, the first time to determine the length of the result, the second time
to get the compressed data itself.
-P progname Use the program progname instead of the standard gzip(1) for compression and decompression
with the -Z option. For example, use the options -Z -P bzip2 to write and install archives
using bzip2(1) compression. If progname does not have command line options (-c, -d, and
-<number>) in the style of gzip(1) then the -Q option can be used to supply the right
options. The compression program used must have the property that, if the output file size
exceeds the value of the -M option, then when the compression program is run for a second
time on the same input, it must produce an output with exactly the same size. (See also the
-M option description.) The GnuPG (gpg) encryption program does not satisfy this lenght-
preserving criterion unless its built-in compression is disabled (see examples in the afio
source script3/ directory). See also the -Q, -U and -3 options.
-Q opt Pass the option opt to the compression or decompression program used with the -Z option. For
passing multiple options, use -Q multiple times. If no -Q flag is present, the standard
options are passed. The standard options are -c -6 when the program is called for
compression and -c -d when the program is called for decompression. Use the special case -Q
"" if no options at all are to be passed to the program.
-R Disk format command string
This is the command that is run when you enter 2 to reformat the disk after a failed verify.
The default (fdformat /dev/fd0H1440) can be changed to a given system's default by editing
the Makefile. You are also prompted for formatting whenever a disk change is requested.
-S Do not ignore a leading slash in the pattern or the file name when matching -y and -Y
patterns. See also -A.
-T threshold Only compress a file when using the -Z option if its length is at least threshold. The
default is -T 0k. This is useful if you have a slow machine or a fast backup medium.
Specifying -T 3k typically halves the number of invocations of gzip(1), saving some 30%
computation time, while creating an archive that is only 5% longer. The combination -T 8k
-G 1 typically saves 70% computation time and gives a 20% size increase. The latter
combination may be a good alternative to not using -Z at all. These figures of course
depend heavily on the kind of files in the archive and the processor - i/o speed ratio on
your machine. See also the -2 option.
-U If used with the -Z option, forces compressed versions to be stored of all files, even if
the compressed versions are bigger than the original versions, and disregarding any
(default) values of the -T and -2 options. This is useful when the -P and -Q options are
used to replace the compression program gzip with an encryption program in order to make an
archive with encrypted files. Due to internal limitations of afio, use of this flag forces
the writing of file content with each hard linked file, rather than only once for every set
of hard linked files. WARNING: use of the -U option will also cause compression (or
whatever operation the -P option indicates) on files larger than 2 GB, if these are present
in the input. Not all compression programs might handle such huge files correctly (recent
Linux versions of gzip, bzip2, and gpg have all been tested and seem to work OK). If your
setup is obscure, some testing might be warranted.
-W filename Treats each line in filename as an -Y pattern, see -Y.
-Y pattern Do not process files whose names match shell wildcard pattern pattern. See also -y and -W.
-Z Compress the files that go into the archive when creating an archive, or uncompress them
again when installing an archive. afio -Z will compress each file in the archive
individually, while keeping the archive headers uncompressed. Compared to tar zc style
archives, afio -Z archives are therefore much more fault-tolerant against read errors on the
backup medium. When creating an archive with the -Z option, afio will run gzip on each file
encountered, and, if the result is smaller than the original, store the compressed version
of the file. Requires gzip(1) to be in your path. Mainly to speed up afio operation,
compression is not attempted on a file if: 1) the file is very small (see the -T option), 2)
the file is very large (see the -2 option), 3) the file has a certain extension, so it
probably contains compressed data already (see the -E option), 4) the file pathname matches
a certain pattern, as set by the -6 option, 5) the file has hard links (this due to an
internal limitation of afio, but this limitation does not apply if the -l option is also
used). Regardless of the above, if the -U option is used then the compression program is
always run, and the compressed result is always stored. When installing an archive with
compressed files, the -Z option needs to be used in order to make afio automatically
uncompress the files that it compressed earlier. The -P option can be used to do the
(un)compression with programs other than gzip, see the -P (and -Q and -3) options in this
manpage for details. See also the -G option which provides yet another way to tune the
compression process.
-0 Use filenames terminated with '\0' instead of '\n'. When used as follows: find ... -print0 |
afio -o -0 ..., it ensures that any input filename can be handled, even a file name
containing newlines. When used as afio -t -0 ... | ..., this allows the table of contents
output to be parsed unambiguosly even if the filenames contain newlines. The -0 option also
affects the parsing of the files supplied by -w file and -W file options: if the option -0
precedes them in the command line then the pattern lines contained in the files should be
terminated with '\0' in stead of '\n'. A second use of -0 toggles the option. This can be
useful when using multiple pattern files or when combining with the -t option.
-1 warnings-to-ignore
Control if afio(1) should exit with a nonzero code after printing certain warning messages,
and if certain warning messages should be printed at all. This option is sometimes useful
when calling afio(1) from inside a backup script or program. afio(1) will exit with a
nonzero code on encountering various 'hard' errors, and also (with the default value of the
-1 option) when it has printed certain warning messages during execution. warnings-to-
ignore is a list of letters which determines the behavior related to warning messages. The
default value for this option is -1 mc. For afio versions 2.4.3 and earlier, the default
was -1 a. For afio versions 2.4.4 and 2.4.5, the default was -1 ''. The defined warnings-
to-ignore letters are as follows. a is for for ignoring all possible warnings on exit: if
this letter is used, the printing of a warning message will never cause a nonzero exit code.
m is for ignoring in the exit code any warning about missing files, which will be printed
when, on creating an archive, a file whose name was read from the standard input is not
found. c is for ignoring in the exit code the warning that the archive being created will
not be not fully compatible with cpio or afio versions 2.4.7 or lower. C is the same as c,
but in addition the warning message will not even be printed. M will suppress the printing
of all warning messages asssociated with Multivolume archive handling, messages like "Output
limit reached" and "Continuing". d is for ignoring in the exit code any warnings about
changed files, which will be printed when, on creating an archive, a file that is being
archived changes while it is being written into the archive, where the changing is detected
by examining the file modification time stamp. r is for ignoring certain warnings during
the verify (-r) operation. If this letter is used, some verification errors that are very
probably due to changes in the filesystem, during or after the backup was made, are ignored
in determining the exit code. The two verification errors that are ignored are: 1) a file
in the archive is no longer present on the filesystem, and 2) the file contents in the
archive and on the filesystem are different, but the file lengths or the file modification
times are also different, so the difference in contents is probably due to the file on the
file system having been changed. n is for ignoring in the exit code a particular class of
no-such-file warnings: it ignores these warnings when they happen after the file has already
been successfully opened. This unusual warning situation can occur when archiving files on
Windows smbfs filesystems -- due to a Windows problem, smbfs files with non-ASCII characters
in their names can sometimes be opened but not read. When the -Z option is used, the n
letter function is (currently) only implemented for files with sizes smaller than indicated
by the -T option, so in that case the -T option is also needed for this letter to have any
effect.
-2 maximum-file-size-to-compress
Do not compress any files which are larger than this size when making a compressed archive
with the -Z option. The default value is -2 200m (200 Megabytes). This maximum size cutoff
lowers the risk that a major portion of a large file will be irrecoverable due to small
media errors. If a media error occurs while reading a file that afio has stored in a
compressed form, then afio and gzip will not be able to restore the entire remainder of that
file. This is usually an acceptable risk for small files. However for very large files the
risk of loosing a large amount of data because of this effect will usually be too big. The
special case -2 0 eliminates any maximum size cutoff.
-3 filedescriptor-nr
Rewind the filedescriptor before invoking the (un)compression program if using the -Z
option. This is useful when the -P and -Q options are used to replace the compression
program gzip with some types of encryption programs in order to make or read an archive with
encrypted files. The rewinding is needed to interface correctly with some encryption
programs that read their key from an open filedescriptor. If the -P program name matches
'pgp' or 'gpg', then the -3 option must be used to avoid afio(1) reporting an error. Use
the special case -3 0 to suppress the error message without rewinding any file descriptor.
The -3 0 option may also be needed to successfully read back encrypted archives made with
afio version 2.4.5 and older.
-4 (Deprecated, the intended effect of this option is now archived by default as long as the -5
option is not used. This option could still be useful for compatibility with machines
running an older version of afio.) Write archive with the `extended ASCII' format headers
which use 4-byte inode numbers. Archives using the extended ASCII format headers are not
compatible with any other archiver. This option was useful for reliably creating and
restoring sets of files with many internal hard links, for example a news spool.
-5 Refuse to create an archive that is incompatible with cpio(1). If this option is used, afio
will never write any `large ASCII' file headers that are incompatible with cpio(1), but fail
with an error code instead. See the ARCHIVE PORTABILITY section above for more information
on the use of `large ASCII' file headers.
-6 filename While creating an archive with compressed files using the -Z option, disable (attempts at)
compression for files that match particular shell patterns. This option can be used to
speed up the creation of the archive, by making afio avoid trying to use gzip on files that
contain compressed data already. Reads shell wildcard patterns from filename, treating each
line in the file as a pattern. Files whose names match these patterns are not to be
compressed when using the -Z option. Pattern matching is done in exactly the same way as
described for the -y option. See also the -E option: the (default) settings of the -E
option will further restrict compression attempts. The -E option controls compression
attempts based on file extensions; the -6 option is mainly intended as a method for
excluding all files in certain subdirectory trees from compression..
-7 Switch between shell wildcard pattern matching and exact name matching (without interpreting
any wildcard characters) for the patterns supplied in the -y, -Y, -w, and -W options. If
the -7 option is used in front of any option -y, -Y, -w, or -W, then the patterns supplied
in these options are not intrerpreted as wildcard patterns, but as character strings that
must match exactly to the file name, except possibly in leading slashes. This option can be
useful for handling the exceptional cases where file names in the archive, or the names of
files to be archived, contain wildcard characters themselves. For example, find /tmp
-print0 | afio -ov -Y '*.jpg' -7 -Y '/tmp/a[12]*4' -0 archive can be used to archive files
all files under /tmp, even files with a '\n' character in the name, except for .jpg files
and the file with the exact name /tmp/a[12]*4. A second use of -7 toggles the matching for
subsequently occurring -y, -Y, -w, and -W back to shell wildcard pattern matching.
-9 Do not round down any -s volume sizes to the nearest -b block size. See the -s option.
ARCHIVE PORTABILITY
afio archives are portable between different types of UNIX systems, as they contain only ASCII-formatted
header information.
Except in special cases discussed below, afio will create archives with the same format as ASCII cpio(1)
archives. Therefore cpio(1) can usually be used to restore an afio archive in the case that afio is not
available on a system. (With most cpio versions, to unpack an ASCII format archive, use cpio -c, and for
GNU cpio(1) use cpio -H odc.) When unpacking with cpio, any compressed files inside an afio -Z archive
are not uncompressed by cpio, but will be created on the file system as compressed files with a .z
extension.
Unfortunately, the ASCII cpio archive format cannot represent some files and file properties that can be
present in a modern UNIX filesystem. If afio creates an archive with such things, then it uses an afio-
specific 'large ASCII' header for the files concerned. Archives with large ASCII headers cannot be
unpacked completely by cpio or afio versions before 2.4.8.
When creating an archive, the `large ASCII' header is used by afio to cover the following situations:
o A file has a size larger than 2 GB
o The archive contains more than 64K files which have hard links
o A file, directory, or special file has a UID or GID value larger than 65535.
The -5 option can be used to always preserve cpio compatibility, it will cause afio to fail rather than
produce an incompatible archive in the cases above.
Archives made using the (deprecated) -4 option are also not compatible with cpio, but they are compatible
with afio versions 2.4.4 and later.
ARCHIVE FILE FORMAT
An afio archive file has a simple format. The archive starts with a file header for the first file,
followed by the contents of the first file (which will either be the exact contents byte-for-byte, or the
exact contents in some compressed format). The data of the first file is immediately followed by the
file header of the second file, and so on. At the end, there is a special `end of archive' header,
usually followed by some padding bytes.
A multi-volume afio archive is simply a normal archive split up into multiple parts. There are no special
volume-level data headers. This means that that volumes can be split and merged by external programs, as
long as the data stays in the correct order. It also implies that the contents of a single file can
cross volume boundaries. Selective restores of files at known volume locations can be done by feeding
only the needed volumes to afio, provided that the -k option is used.
The contents of hard linked files are (unless the -l option is used) only stored once in the archive.
The file headers for the second, third, and later occurrence of a hard linked file have no data after
them. This makes selective restores of hard-liked files difficult: if later occurrences are to be
restored correctly, the first occurrence always needs to be selected too.
NOTES
Special-case archive names:
o Specify - to read or write the standard input or output, respectively. This disables multi-volume
archive handling.
o Prefix a command string to be executed with an exclamation mark (!). The command is executed once
for each archive volume, with its standard input or output piped to afio. It is expected to
produce a zero exit code when all is well.
o Use system:file to access an archive in file on system. This is really just a special case of
pipelining. It requires a 4.2BSD-style remote shell (rsh(1C)) and a remote copy of afio.
o A more elaborate case of the above is [user@]host[%rsh][=afio]:file where the optional user@
component specifies the user name on the remote host, the optional %rsh specifies the (local) name
of the remote shell command to use, and the optional =afio specifies the name of the remote copy of
the afio command.
o Anything else specifies a local file or device. An output file will be created if it does not
already exist.
o When the -s option is used to invoke multi-volume archive processing, any %V in the file/device
name or command string is subsisuted by the current volume number, and any %S by the current volume
size. Use %% to produce a single % character.
Recognizes obsolete binary cpio(1) archives (including those from machines with reversed byte order), but
cannot write them.
Recovers from archive corruption by searching for a valid magic number. This is rather simplistic, but,
much like a disassembler, almost always works.
Optimizes pathnames with respect to the current and parent directories. For example,
./src/sh/../misc/afio.c becomes src/misc/afio.c.
CONTROL FILES
Afio archives can contain so-called control files. Unlike normal archive entries, a control file in not
unpacked to the filesystem. A control file has a label and some data. When afio encounters a control
file in the archive it is reading, it will feed the label and data to a so-called control script. The
control script is supplied by the user. It can perform special actions based on the label and data it
receives from afio.
Control file labels. The control file mechanism can be used for many things. Examples are putting
archive descriptions at the beginning of the archive and embedding lists of files to move before
unpacking the rest or the archive.
To distinguish between different uses, the label of a control file should indicate the program that made
the control file and the purpose of the control file data. It should have the form
programname.kindofdata
where programname is the name of the backup program that generated the control file, and kindofdata is
the meaning of the control file data. Some examples are
tbackup.movelist tbackup.updatescript
blebberfiler.archivecontents
backup_script_of_Joe_User.archivedescription
The user-supplied control script should look at the label to decide what to do with the control data.
This way, control files with unknown labels can be ignored, and afio archives maintain some degree of
portability between different programs that restore or index them.
Control file labels that are intended to be portable between different backup programs could be defined
in the future.
Making control files. When making an archive, afio reads a stream containing the names of the files
(directories, ...) to put in the archive. This stream may also contain `control file generators', which
are lines with the following format:
//--sourcename label
Here, the //-- sequence signals that a control file is to be made, sourcename is the path to a file
containing the control file data, and label is the control file label. The sourcename must be a regular
file or a symlink to a regular file.
A control file will show up as
//--CONTROL_FILE/label
in an archive listing, where label is the control file label.
Control scripts. A control script is supplied to afio with the
-D controlscript
command line option. The controlscript must be an executable program. The script is run whenever afio
encounters a control file while doing a -i -t or -r operation. Afio will supply the control file label
as an argument to the script. The script should read the control file data from its standard input. If
the script exits with a non-zero exit status, afio will issue a warning message.
If a control file is encountered and no -D option is given, afio will issue a warning message. To
suppress the warning message and ignore all control scripts, -D "" can be used.
An example of a control script is
#!/bin/sh
if [ $1 = "afio_example.headertext" ]; then
#the headertext control file is supposed to be packed as the first
#entry of the archive
echo Archive header:
cat -
echo Unpack this archive? y/n
#stdout is still connected to the tty, read the reply from stdout
read yn <&1
if [ "$yn" = n ]; then
#abort
kill $PPID
fi
else
echo Ignoring unknown control file.
cat - >/dev/null
fi
Afio never compresses the control file data when storing it in an archive, even when the -Z option is
used. When a control file is encountered by cpio(1) or an afio with a version number below 2.4.1, the
data will be unpacked to the filesystem, and named CONTROL_FILE/label where label is the control file
label.
BUGS
There are too many options.
Restricts pathnames to 1023 characters, and 255 meaningful elements (where each element is a pathname
component separated by a /).
Does not use the same default block size as tar(1). tar(1) uses 10 KB, afio uses 5 KB by default. Some
tape drives only work with a 10 KB block size, in that case the afio option -b 10k is needed to make the
tape work.
There is no sequence information within multi-volume archives. Input sequence errors generally
masquerade as data corruption. A solution would probably be mutually exclusive with cpio(1)
compatibility.
Degenerate uses of symbolic links are mangled by pathname optimization. For example, assuming that
"usr.src" is a symbolic link to "/usr/src", the pathname "usr.src/../bin/cu" is mis-optimized into
"bin/cu" (rather than "/usr/bin/cu").
The afio code for handling floppies (-F and -f and -K options) has buggy error handling. afio does not
allow one to retry a failed floppy write on a different floppy, and it cannot recover from a verify
error. If the floppy handling code is used and write or verify errors do occur, it is best to restart
afio completely. Making backups to floppies should really be done with a more specialised backup program
that wraps afio.
The Linux floppy drivers below kernel version 1.1.54 do not allow afio to find out about floppy write
errors while writing. If you are running a kernel below 1.1.54, afio will happily fail to write to (say)
a write protected disk and not report anything wrong! The only way to find out about write errors in
this case is by watching the kernel messages, or by switching on the verify (-K) option.
The remote archive facilites (host:/file archive names) have not been exhaustively tested. These
facilities have seen a lot of real-life use though. However, there may be bugs in the code for error
handling and error reporting with remote archives.
An archive created with a command like 'find /usr/src/linux -print | afio -o ...' will not contain the
ownership and permissions of the /usr and /usr/src directories. If these directories are missing when
restoring the archive, afio will recreate them with some default ownership and permissions.
Afio can not restore time stamps on symlinks. Also, on operating systems without an lchown(2) system
call, afio can not restore owner/group information on symlinks. (Linux has lchown since kernel version
2.1.86.)
Afio tries to restore modification time stamps of directories in the archive correctly. However, if it
exits prematurely, then the modification times will not be restored correctly.
A restore using decompression will fail if the gzip binary used by afio is overwritten, by afio or by
another program, during the restore. The restore will also fail if any shared libraries needed to start
gzip are overwritten during the restore. afio should not normally be used to overwrite the system files
on a running system. If it is used in this way, a flag like -Y /bin/gzip can often be added to prevent
failure.
The -r option verifies the file contents of the files in the archive against the files on the filesystem,
but does not cross-check details like permission bits on files, nor does it cross-check that archived
directories or other non-file entities still exist on the filesystem.
There are several problems with archiving hard links. 1) Due to internal limitations, files with hard
links cannot be stored in compressed form, unless the -l or -U options are used which force each hard
linked file to be stored separately. 2) Archives which contain hard links and which were made with older
(pre-2.4.8) versions of afio or with cpio can not always be correctly unpacked. This is really a problem
in the archives and not in the current version of afio. The risk of incorrect unpacking will be greater
if the number of files or hard links in the archives is larger. 3) In a selective restore, if the
selection predicates do not select the first copy of a file with archive-internal hard links, then all
subsequent copies, if selected, will not be correctly restored. 4) Unless the -4 option is used, the
inode number fields in the archive headers for files with hard links of the archive will sometimes not
contain the actual (least significant 16 bits of) the inode number of the original file.
Some Linux kernels no not allow one to create a hard link to a symbolic link. afio will try to re-create
such hard links when unpacking an archive, but might fail due to kernel restrictions.
Due to internal limitations of afio, the use of the -U option forces the writing of file content with
each hard linked file, rather than only once for every set of hard linked files.
When it is run without super-user privileges, afio is not able to unpack a file into a directory for
which it has no write permissions, even if it just created that directory itself. This can be a problem
when trying to restore directory structures created by some source code control tools like RCS.
When block or character device files are packed into an archive on one operating system (e.g. Linux) and
unpacked on another operating system, which uses different sizes for the major and minor device number
data types (e.g. Solaris), the major and minor numbers of the device files will not be restored
correctly. This can be a problem if the operating systems share a cross-mounted filesystem. A
workaround is to use tar(1) for the device files.
EXAMPLES
Create an archive with compressed files:
find .... | afio -o -v -Z /dev/fd0H1440
Install (unpack) an archive with compressed files:
afio -i -v -Z archive
Install (unpack) an archive with compressed files, protecting newer existing files:
afio -i -v -Z -n archive
Create an archive with compressed files on floppy disks:
find .... | afio -o -v -s 1440k -F -Z /dev/fd0H1440
Create an archive with all file contents encrypted by pgp:
export PGPPASSFD=3
find .... | afio -ovz -Z -U -P pgp -Q -fc -Q +verbose=0 -3 3 archive 3<passphrasefile
Create an archive on recordable CDs using the cdrecord utility to write each CD:
find .... | afio -o -b 2048 -s325000x -v '!cdrecord .... -'
Extract a single named file from an archive on /dev/tape:
afio -i -v -Z -y /home/me/thedir/thefile /dev/tape
(If these do not exist yet, afio will also create the enclosing directories home/me/myfiledir under
current working directory.)
Extract files matching a pattern from an archive on /dev/tape:
afio -i -v -Z -y '/home/me/*' /dev/tape
(If these do not exist yet, afio will also create the enclosing directories home/me under current working
directory.)
If your filesystem cannot handle files larger than 2GB, but you want to make an archive on that
filesystem that is larger than 2GB, you use the following trick to split the archive into multiple files
of each 1 GB:
find /home | afio -o ... - | split -b1024m - archive.
the files will be called archive.aa, archive.ab, etc. You can restore the whole archive using:
cat archive.* | afio -i ... -
The wildcard expansion by the shell will ensure that cat will read the parts in the right (alphabetic)
order.
SEE ALSO
cpio(1), find(1), tar(1), compress(1), gzip(1).
WEB SITE AND INTERNET RESOURCES
The afio home page is at http://members.chello.nl/~k.holtman/afio.html
See the home page for information on submitting questions, bug reports, patches, etc.
AUTHORS
Mark Brukhartz
Jeff Buhrt
Dave Gymer
Andrew Stevens
Koen Holtman (current maintainer) koen.holtman@ieee.org
Anders Baekgaard
Too many other people to list here have contributed code, patches, ideas, and bug reports. Many of these
are mentioned in the HISTORY file that is included with the sources.
AFIO(1)