Provided by: ipmiutil_3.1.5-1_amd64 bug

NAME

       ipmiutil_fru - show Field Replaceable Unit configuration data

SYNOPSIS

       ipmiutil fru [-abcdeikmsvx -N node -U user -P/-R pswd -EFJTVYZ]

DESCRIPTION

       ipmiutil  fru  is  a  program  that  uses IPMI commands to show FRU configuration data and
       optionally write an asset tag string into the FRU  data.   Setting  the  asset  tag  is  a
       function  that  can be used to uniquely identify the unit, even if the storage devices are
       removed or changed.  This utility can use either the /dev/ipmi0 driver from OpenIPMI,  the
       /dev/imb  driver  from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs,
       or the IPMI LAN interface if -N.

OPTIONS

       Command line options are described below.

       -a asset_string
              This option specifies an asset tag string  to  be  written  to  the  baseboard  FRU
              Product  area.   The  asset tag length is limited by the existing FRU Product data,
              but is usually allowed up to 16 characters.  The default is to not modify this  FRU
              field.

       -b     Only show the Baseboard FRU data.  The default behavior is to also scan for any SDR
              FRU data or DIMM SPD data referenced by the SDRs.

       -c     Show FRU output in a canonical format, with a default delimiter of '|'.

       -d file
              Dump binary FRU data to the specified file.

       -e     Show Every FRU output in a bladed chassis, including those under  child  MCs.   The
              default is to show FRUs referred to by just the target MC.

       -i 00  This  option specifies a specific FRU ID to show.  The input value should be in hex
              (0b, 1a, etc.), as shown from the sensor SDR output.  By default, all FRU IDs  that
              are specified in the FRU locator SDRs are shown.

       -k <setsn | setmfgdate | nextboot>
              These  Kontron  OEM functions set FRU data based on existing data stored elsewhere.
              The setsn option sets the FRU Board and Product serial number, and  the  setmfgdate
              option  sets  the  FRU  Board Mfg DateTime.  The nextboot option specifies the boot
              device for the next boot: BIOS, FDD, HDD, CDROM, or  network.   These  options  are
              only supported on Kontron ATCA boards which have this functionality.

       -m 002000
              Show  FRU  for  a specific MC (e.g. bus 00, sa 20, lun 00).  This could be used for
              PICMG or ATCA blade systems.  The trailing character,  if  present,  indicates  SMI
              addressing if 's', or IPMB addressing if 'i' or not present.

       -s serial_num
              This  option  specifies  a  serial number string to be written to the baseboard FRU
              Product area.  The serial number can be  any  string  up  to  16  characters.   The
              default is to not modify this FRU field.

       -v prod_ver
              This  option  specifies  a  product  version  number  string  to  be written to the
              baseboard FRU Product area.  The  version  number  can  be  any  string  up  to  16
              characters.  The default is to not modify this FRU field.

       -x     Causes eXtra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address of the remote target system.  If a nodename is specified,
              IPMI LAN interface is used.  Otherwise the local  system  management  interface  is
              used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open, gnu, landesk, lan,
              lan2, lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default  is
              to detect any available driver type and use it.

       -J     Use   the   specified   LanPlus   cipher   suite  (0  thru  17):  0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN  Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes,  do  prompt  the  user for the IPMI LAN remote password.  Alternatives for the
              password are -E or -P.

       -Z     Set the slave address for a local MC

SEE ALSO

       ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) igetevent(8)  ihealth(8)
       ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)

WARNINGS

       See  http://ipmiutil.sourceforge.net/  for  the latest version of ipmiutil and any bug fix
       list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.4: 09 Sep 2010                             IFRU(8)