Provided by: ipmiutil_3.1.5-1_amd64 bug

NAME

       ipmiutil_sol - an IPMI Serial-Over-LAN Console application

SYNOPSIS

       ipmiutil sol [-acdeilorsvwxz -NUPREFJTVY]

DESCRIPTION

       This  utility  starts  an IPMI Serial-Over-LAN console session.  A Serial-over-LAN console
       allows the client to see and modify functions before the OS boots,  such  as  BIOS  setup,
       grub,  etc.   This utility uses either the IPMI LAN 1.5 or 2.0 SOL interface.  The 1.5 SOL
       interface is specific to Intel BMCs, while any IPMI 2.0 BMC should support 2.0  SOL.   The
       target  system/node must first have these parameters configured before SOL sessions can be
       started:
       - [BIOS] serial console redirection parameters,
       - [IPMI] lan and SOL parameters (see ipmiutil lan or ilan), and
       - [OS] For Linux, edit grub.conf, inittab, and securetty parameters.
       Be sure that the baud rate matches in all of the above places.  See the ipmiutil UserGuide
       section 4.8 for details.

OPTIONS

       -a     Activate  the SOL Console session, and enter console mode.  Use the escape sequence
              ('~.') to exit the session.

       -c '^' Set the escape Character to '^', or  another  ANSI  character.   This  changes  the
              default  two-character  escape  sequence  ('~.')  to  the  specified  single escape
              character, which will end the SOL session.

       -d     Deactivate the SOL Console session.  Use this if the previous session  was  aborted
              abnormally and starting a new session gives an error.

       -e     Turn  Encryption  off  in  negotiation  when  activating  a  session.   By default,
              encryption is on for Serial-Over-LAN console sessions.

       -l     Use Legacy BIOS mapping for Enter key (CR+LF) instead of just LF.  This  is  needed
              for  BIOS  Setup menus and DOS, but causes an extra LF to occur in Linux.  So, only
              use this option if doing BIOS or DOS changes.  This  should  be  seldom  be  needed
              since  now  the  default  is  to  automatically  detect  these  menus  with colored
              backgrounds and change the mapping.

       -i input_file
              Use this file as an input script.  The input_file will be read after the session is
              established.   This  can be used to automate certain tasks.  The input_file is read
              one line at a time.  If the input_file does not have an escape character (~) to end
              the session, then the input is returned to the keyboard when the file ends.

       -o output_file
              Use  a  Trace log.  The output_file is created and all SOL screen output is written
              to the file, including VT100 escape sequences.   If  the  output_file  exists,  the
              output is appended to it.  This can be used to log what the user has done in an SOL
              session.

       -p     Port to use.  Defaults to RMCP port 623.

       -r     Use Raw terminal I/O instead of custom VT100 to ANSI translation (in Windows).  Use
              this option if the server is configured in BIOS and BMC for ANSI and the utility is
              being invoked from Windows.

       -s NNN For a slow link with high latency, this adds a delay of  NNN  microseconds  between
              sending and receiving SOL packets.  The default is 100 microseconds.

       -w     (Windows  only)  Do  not  use  the  Windows  Console  buffer, but use Windows stdio
              instead.  This does not handle cursor positioning correctly in some cases, however.

       -v log_file
              Causes debug messages to be displayed to the specified debug log_file.  The default
              log_file is isoldbg.log in the current directory.

       -x     Causes debug messages to be displayed to the debug log file.

       -z     Causes more verbose debug messages to be displayed to the debug log file.

       -N nodename
              Nodename  or  IP  address of the remote target system.  If a nodename is specified,
              IPMI LAN interface is used.  Otherwise the local  system  management  interface  is
              used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open, gnu, landesk, lan,
              lan2, lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default  is
              to detect any supported driver type and use it.

       -J     Use   the   specified   LanPlus   cipher   suite  (0  thru  17):  0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN  Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes,  do  prompt  the  user for the IPMI LAN remote password.  Alternatives for the
              password are -E or -P.

EXAMPLES

       ipmiutil sol -a -N nodename -U username -P password
       Starts an SOL console session to the nodename.  Detect the lan protocol.

       ipmiutil sol -a -N nodename -U username -P password  -Flan2
       Starts an SOL console session to the nodename.  Force lan protocol to 2.0.

PLATFORM SERIAL PORT CONFIGURATION EXAMPLES

       First, enter BIOS  Setup  for  Serial  Console  Redirection  parameters:  (these  vary  by
       platform)
         Console Redirection = Serial Port B
         ACPI Redirection = Disabled
         Baud Rate = 115.2K
         Flow Control = CTS/RTS
         Terminal Type = VT100
         Legacy Redirection = Enabled
       Note  that  the  Baud  Rate  can vary, but it must match in all locations where it is used
       (BIOS, IPMI, and Linux).
       For some non-Intel platforms, the serial console would be COM1 instead of COM2, but should
       be enabled in BIOS.
       From Linux, run "ipmiutil serial -c" for Terminal Mode shared configuration.
       Or,  on  older Intel TSRLT2 platforms: From Linux, run "ipmiutil serial -s" for Basic Mode
       Shared configuration.

LINUX CONFIGURATION FOR SERIAL CONSOLE

       If using lilo, in /etc/lilo.conf, add
         append="console=ttyS1,19200n8 console=tty0"
       (and comment out the "message=" line because it includes graphics)
       Note that the append line can be placed in the global section and removed from each kernel
       section if there are no other differences.

       Or, if using grub, edit /boot/grub/grub.conf as follows:
         #Omit the splashimage or gfxmenu
         # splashimage=(hd0,0)/grub/splash.xpm.gz
         #The serial and terminal lines are not usually needed
         # serial --unit=1 --speed=19200 --word=8 --parity=no --stop=1
         # terminal --timeout=10 serial console
         #Add the console=ttyS* parameter to the kernel line
           kernel (hd0,0) /vmlinuz root=/dev/sda2 console=ttyS1,19200n8

       Add this line to /etc/initab, if ttyS1 is not already there:
         co:2345:respawn:/sbin/agetty ttyS1 19200 vt100

       Add this line to /etc/securetty, if ttyS1 is not already there:
         ttyS1

SEE ALSO

       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8) ievents(8) ifru(8) igetevent(8)
       ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) iwdt(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and  any  bug  fix
       list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.1: 17 Feb 2010                             ISOL(8)