Provided by: ipmiutil_3.1.5-1_amd64 bug

NAME

       ipmiutil - a meta-command to invoke various IPMI functions.

SYNOPSIS

       ipmiutil <command> [-x -NUPREFJTVY] [other command options]

DESCRIPTION

       This  utility  performs  various  IPMI functions.   Each of the individual commands in the
       ipmiutil project can be invoked via this  meta-command.   The  <command>  is  one  of  the
       following:
          alarms   show/set the front panel alarm LEDs and relays
          leds     show/set the front panel alarm LEDs and relays
          cmd      send a specified raw IPMI command to the BMC
          config   list/save/restore BMC configuration parameters
          dcmi     get/set DCMI parameters
          discover    discover all IPMI servers on this LAN
          ekanalyzer  run FRU-EKeying analyzer on FRU files (deprecated, see fru)
          events   decode IPMI events and display them
          firewall show/set firmware firewall functions
          fru      show decoded FRU inventory data, write asset tag
          fwum     OEM firmware update manager extensions
          getevt   get IPMI events and display them, event daemon
          getevent get IPMI events and display them, event daemon
          health   check and show the basic health of the IPMI BMC
          hpm      HPM firmware update manager extensions
          lan      show/set IPMI LAN parameters and PEF table
          picmg    show/set picmg extended functions
          reset    cause the BMC to reset or power down the system
          sel      show/clear firmware System Event Log records
          sensor   show Sensor Data Records, readings, thresholds
          serial   show/set IPMI Serial & Terminal Mode parameters
          sol      start/stop an SOL console session
          smcoem   SuperMicro OEM functions
          sunoem   Sun OEM functions
          delloem  Dell OEM functions
          tsol     Tyan SOL console start/stop session
          wdt      show/set/reset the watchdog timer
       For help on each command (e.g. 'sel'), enter:
          ipmiutil sel -?
       For  man  pages  on each command, its man page is named "i<command>", or refer to SEE ALSO
       below.

       This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver  from
       Intel,  the  /dev/ipmikcs  driver  from  valinux,  direct  user-space IOs, or the IPMI LAN
       interface if -N is used.

OPTIONS

       Command options are described in the man page for each command.  Below are a  few  of  the
       common options.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address of the remote target system.  If a nodename is specified,
              IPMI LAN interface is used.  Otherwise the local  system  management  interface  is
              used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force  the  driver  type  to one of the followng: imb, va, open, gnu, landesk, lan,
              lan2, lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default  is
              to detect any available driver type and use it.

       -J     Use   the   specified   LanPlus   cipher   suite  (0  thru  17):  0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use  a  specified  IPMI  LAN  Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes,  do  prompt  the  user for the IPMI LAN remote password.  Alternatives for the
              password are -E or -P.

EXAMPLES

       ipmiutil sel
       Shows the IPMI System Event Log entries.

       ipmiutil wdt
       Shows the watchdog timer values.

SEE ALSO

       ialarms(8) iconfig(8) icmd(8)  idiscover(8)  ievents(8)  ifirewall(8)  ifru(8)  ifruset(8)
       ifwum(8)  igetevent(8)  ihealth(8)  ihpm(8) ilan(8) ipicmg(8) ireset(8) isel(8) isensor(8)
       iserial(8) isol(8) isunoem(8) iwdt(8) ipmiutil(8) ipmi_port(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and  any  bug  fix
       list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.1: 10 May 2012                         IPMIUTIL(8)