Provided by: lvm2_2.03.07-1ubuntu1_amd64 
NAME
pvmove - Move extents from one physical volume to another
SYNOPSIS
pvmove position_args
[ option_args ]
[ position_args ]
DESCRIPTION
pvmove moves the allocated physical extents (PEs) on a source PV to one or more destination PVs. You can
optionally specify a source LV in which case only extents used by that LV will be moved to free (or
specified) extents on the destination PV. If no destination PV is specified, the normal allocation rules
for the VG are used.
If pvmove is interrupted for any reason (e.g. the machine crashes) then run pvmove again without any PV
arguments to restart any operations that were in progress from the last checkpoint. Alternatively, use
the abort option at any time to abort the operation. The resulting location of LVs after an abort depends
on whether the atomic option was used.
More than one pvmove can run concurrently if they are moving data from different source PVs, but
additional pvmoves will ignore any LVs already in the process of being changed, so some data might not
get moved.
USAGE
Move PV extents.
pvmove PV
[ -A|--autobackup y|n ]
[ -n|--name LV ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --atomic ]
[ --noudevsync ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
[ PV ... ]
Continue or abort existing pvmove operations.
pvmove
[ COMMON_OPTIONS ]
Common options for command:
[ -b|--background ]
[ -i|--interval Number ]
[ --abort ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--abort
Abort any pvmove operations in progress. If a pvmove was started with the --atomic option, then
all LVs will remain on the source PV. Otherwise, segments that have been moved will remain on the
destination PV, while unmoved segments will remain on the source PV.
--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allocate Physical Extents (PEs) from the
VG. Each VG and LV has an allocation policy which can be changed with vgchange/lvchange, or
overriden on the command line. normal applies common sense rules such as not placing parallel
stripes on the same PV. inherit applies the VG policy to an LV. contiguous requires new PEs be
placed adjacent to existing PEs. cling places new PEs on the same PV as existing PEs in the same
stripe of the LV. If there are sufficient PEs for an allocation, but normal does not use them,
anywhere will use them even if it reduces performance, e.g. by placing two stripes on the same PV.
Optional positional PV args on the command line can also be used to limit which PVs the command
will use for allocation. See lvm(8) for more information about allocation.
--atomic
Makes a pvmove operation atomic, ensuring that all affected LVs are moved to the destination PV,
or none are if the operation is aborted.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change. Enabling this is strongly
advised! See vgcfgbackup(8) for more information.
-b|--background
If the operation requires polling, this option causes the command to return before the operation
is complete, and polling is done in the background.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more information about
profiles.
--config String
Config settings for the command. These override lvm.conf settings. The String arg uses the same
format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about
config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file
and/or syslog (if configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and debugging.
-h|--help
Display help text.
-i|--interval Number
Report progress at regular intervals.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information.
--longhelp
Display long help text.
-n|--name String
Move only the extents belonging to the named LV.
--nolocking
Disable locking.
--noudevsync
Disables udev synchronisation. The process will not wait for notification from udev. It will
continue irrespective of any possible udev processing in the background. Only use this if udev is
not running or has rules that ignore the devices LVM creates.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress
any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the report/output_format
setting in lvm.conf. basic is the original format with columns and rows. If there is more than
one report per command, each report is prefixed with the report name for identification. json
produces report output in JSON format. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by disabling all
metadata writing but nevertheless returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool relies on reading back metadata it
believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and
stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme
caution. (For automatic no, see -qq.)
VARIABLES
PV
Physical Volume name, a device path under /dev. For commands managing physical extents, a PV
positional arg generally accepts a suffix indicating a range (or multiple ranges) of physical
extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the
last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and
length range (counting from 0): PV[:PE+PE]...
String
See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always treated as base two
values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit
is specified by letter, followed by |UNIT. UNIT represents other possible input units:
bBsSkKmMgGtTpPeE. b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is megabytes,
g|G is gigabytes, t|T is terabytes, p|P is petabytes, e|E is exabytes. (This should not be
confused with the output control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can
generally be substituted for a required VG parameter.
NOTES
pvmove works as follows:
1. A temporary 'pvmove' LV is created to store details of all the data movements required.
2. Every LV in the VG is searched for contiguous data that need moving according to the command line
arguments. For each piece of data found, a new segment is added to the end of the pvmove LV. This
segment takes the form of a temporary mirror to copy the data from the original location to a newly
allocated location. The original LV is updated to use the new temporary mirror segment in the pvmove LV
instead of accessing the data directly.
3. The VG metadata is updated on disk.
4. The first segment of the pvmove LV is activated and starts to mirror the first part of the data. Only
one segment is mirrored at once as this is usually more efficient.
5. A daemon repeatedly checks progress at the specified time interval. When it detects that the first
temporary mirror is in sync, it breaks that mirror so that only the new location for that data gets used
and writes a checkpoint into the VG metadata on disk. Then it activates the mirror for the next segment
of the pvmove LV.
6. When there are no more segments left to be mirrored, the temporary LV is removed and the VG metadata
is updated so that the LVs reflect the new data locations.
Note that this new process cannot support the original LVM1 type of on-disk metadata. Metadata can be
converted using vgconvert(8).
If the --atomic option is used, a slightly different approach is used for the move. Again, a temporary
'pvmove' LV is created to store the details of all the data movements required. This temporary LV
contains all the segments of the various LVs that need to be moved. However, in this case, an identical
LV is allocated that contains the same number of segments and a mirror is created to copy the contents
from the first temporary LV to the second. After a complete copy is made, the temporary LVs are removed,
leaving behind the segments on the destination PV. If an abort is issued during the move, all LVs being
moved will remain on the source PV.
EXAMPLES
Move all physical extents that are used by simple LVs on the specified PV to free physical extents
elsewhere in the VG.
pvmove /dev/sdb1
Use a specific destination PV when moving physical extents.
pvmove /dev/sdb1 /dev/sdc1
Move extents belonging to a single LV.
pvmove -n lvol1 /dev/sdb1 /dev/sdc1
Rather than moving the contents of an entire device, it is possible to move a range of physical extents,
for example numbers 1000 to 1999 inclusive on the specified PV.
pvmove /dev/sdb1:1000-1999
A range of physical extents to move can be specified as start+length. For example, starting from PE 1000.
(Counting starts from 0, so this refers to the 1001st to the 2000th PE inclusive.)
pvmove /dev/sdb1:1000+1000
Move a range of physical extents to a specific PV (which must have sufficient free extents).
pvmove /dev/sdb1:1000-1999 /dev/sdc1
Move a range of physical extents to specific new extents on a new PV.
pvmove /dev/sdb1:1000-1999 /dev/sdc1:0-999
If the source and destination are on the same disk, the anywhere allocation policy is needed.
pvmove --alloc anywhere /dev/sdb1:1000-1999 /dev/sdb1:0-999
The part of a specific LV present within in a range of physical extents can also be picked out and moved.
pvmove -n lvol1 /dev/sdb1:1000-1999 /dev/sdc1
SEE ALSO
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvscan(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8) vgexport(8)
vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8) vgrename(8)
vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8) lvrename(8)
lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)