Provided by: systemd_249.11-0ubuntu3_amd64
journalctl - Query the systemd journal
journalctl [OPTIONS...] [MATCHES...]
journalctl may be used to query the contents of the systemd(1) journal as written by systemd-journald.service(8). If called without parameters, it will show the full contents of the journal, starting with the oldest entry collected. If one or more match arguments are passed, the output is filtered accordingly. A match is in the format "FIELD=VALUE", e.g. "_SYSTEMD_UNIT=httpd.service", referring to the components of a structured journal entry. See systemd.journal-fields(7) for a list of well-known fields. If multiple matches are specified matching different fields, the log entries are filtered by both, i.e. the resulting output will show only entries matching all the specified matches of this kind. If two matches apply to the same field, then they are automatically matched as alternatives, i.e. the resulting output will show entries matching any of the specified matches for the same field. Finally, the character "+" may appear as a separate word between other terms on the command line. This causes all matches before and after to be combined in a disjunction (i.e. logical OR). It is also possible to filter the entries by specifying an absolute file path as an argument. The file path may be a file or a symbolic link and the file must exist at the time of the query. If a file path refers to an executable binary, an "_EXE=" match for the canonicalized binary path is added to the query. If a file path refers to an executable script, a "_COMM=" match for the script name is added to the query. If a file path refers to a device node, "_KERNEL_DEVICE=" matches for the kernel name of the device and for each of its ancestor devices is added to the query. Symbolic links are dereferenced, kernel names are synthesized, and parent devices are identified from the environment at the time of the query. In general, a device node is the best proxy for an actual device, as log entries do not usually contain fields that identify an actual device. For the resulting log entries to be correct for the actual device, the relevant parts of the environment at the time the entry was logged, in particular the actual device corresponding to the device node, must have been the same as those at the time of the query. Because device nodes generally change their corresponding devices across reboots, specifying a device node path causes the resulting entries to be restricted to those from the current boot. Additional constraints may be added using options --boot, --unit=, etc., to further limit what entries will be shown (logical AND). Output is interleaved from all accessible journal files, whether they are rotated or currently being written, and regardless of whether they belong to the system itself or are accessible user journals. The --header option can be used to identify which files are being shown. The set of journal files which will be used can be modified using the --user, --system, --directory, and --file options, see below. All users are granted access to their private per-user journals. However, by default, only root and users who are members of a few special groups are granted access to the system journal and the journals of other users. Members of the groups "systemd-journal", "adm", and "wheel" can read all journal files. Note that the two latter groups traditionally have additional privileges specified by the distribution. Members of the "wheel" group can often perform administrative tasks. The output is paged through less by default, and long lines are "truncated" to screen width. The hidden part can be viewed by using the left-arrow and right-arrow keys. Paging can be disabled; see the --no-pager option and the "Environment" section below. When outputting to a tty, lines are colored according to priority: lines of level ERROR and higher are colored red; lines of level NOTICE and higher are highlighted; lines of level DEBUG are colored lighter grey; other lines are displayed normally.
On success, 0 is returned; otherwise, a non-zero failure code is returned.
$SYSTEMD_LOG_LEVEL The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Either one of (in order of decreasing importance) emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range 0...7. See syslog(3) for more information. $SYSTEMD_LOG_COLOR A boolean. If true, messages written to the tty will be colored according to priority. This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own. $SYSTEMD_LOG_TIME A boolean. If true, console log messages will be prefixed with a timestamp. This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own. $SYSTEMD_LOG_LOCATION A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates. Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs. $SYSTEMD_LOG_TID A boolean. If true, messages will be prefixed with the current numerical thread ID (TID). Note that the this information is attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs. $SYSTEMD_LOG_TARGET The destination for log messages. One of console (log to the attached tty), console-prefixed (log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log to the journal), journal-or-kmsg (log to the journal if available, and to kmsg otherwise), auto (determine the appropriate log target automatically, the default), null (disable log output). $SYSTEMD_PAGER Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations are tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered no pager is invoked. Setting this environment variable to an empty string or the value "cat" is equivalent to passing --no-pager. $SYSTEMD_LESS Override the options passed to less (by default "FRSXMK"). Users might want to change two options in particular: K This option instructs the pager to exit immediately when Ctrl+C is pressed. To allow less to handle Ctrl+C itself to switch back to the pager command prompt, unset this option. If the value of $SYSTEMD_LESS does not include "K", and the pager that is invoked is less, Ctrl+C will be ignored by the executable, and needs to be handled by the pager. X This option instructs the pager to not send termcap initialization and deinitialization strings to the terminal. It is set by default to allow command output to remain visible in the terminal even after the pager exits. Nevertheless, this prevents some pager functionality from working, in particular paged output cannot be scrolled with the mouse. See less(1) for more discussion. $SYSTEMD_LESSCHARSET Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible). $SYSTEMD_PAGERSECURE Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking the pager, and the pager shall disable commands that open or create new files or start new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not known to implement secure mode will not be used. (Currently only less(1) implements secure mode.) Note: when commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), care must be taken to ensure that unintended interactive features are not enabled. "Secure" mode for the pager may be enabled automatically as describe above. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be reasonable to completely disable the pager using --no-pager instead. $SYSTEMD_COLORS Takes a boolean argument. When true, systemd and related utilities will use colors in their output, otherwise the output will be monochrome. Additionally, the variable can take one of the following special values: "16", "256" to restrict the use of colors to the base 16 or 256 ANSI colors, respectively. This can be specified to override the automatic decision based on $TERM and what the console is connected to. $SYSTEMD_URLIFY The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.
Without arguments, all collected logs are shown unfiltered: journalctl With one match specified, all entries with a field matching the expression are shown: journalctl _SYSTEMD_UNIT=avahi-daemon.service journalctl _SYSTEMD_CGROUP=/user.slice/user-42.slice/session-c1.scope If two different fields are matched, only entries matching both expressions at the same time are shown: journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 If two matches refer to the same field, all entries matching either expression are shown: journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service If the separator "+" is used, two expressions may be combined in a logical OR. The following will show all messages from the Avahi service process with the PID 28097 plus all messages from the D-Bus service (from any of its processes): journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 + _SYSTEMD_UNIT=dbus.service To show all fields emitted by a unit and about the unit, option -u/--unit= should be used. journalctl -u name expands to a complex filter similar to _SYSTEMD_UNIT=name.service + UNIT=name.service _PID=1 + OBJECT_SYSTEMD_UNIT=name.service _UID=0 + COREDUMP_UNIT=name.service _UID=0 MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1 (see systemd.journal-fields(7) for an explanation of those patterns). Show all logs generated by the D-Bus executable: journalctl /usr/bin/dbus-daemon Show all kernel logs from previous boot: journalctl -k -b -1 Show a live log display from a system service apache.service: journalctl -f -u apache
systemd(1), systemd-journald.service(8), systemctl(1), coredumpctl(1), systemd.journal- fields(7), journald.conf(5), systemd.time(7), systemd-journal-remote.service(8), systemd- journal-upload.service(8)