Ubuntu Manpage: sigaction, rt_sigaction - examine and change a signal action

Provided by: manpages-dev_5.10-1ubuntu1_all

NAME

       sigaction, rt_sigaction - examine and change a signal action

SYNOPSIS

       #include <signal.h>

       int sigaction(int signum, const struct sigaction *act,
                     struct sigaction *oldact);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       sigaction(): _POSIX_C_SOURCE

       siginfo_t: _POSIX_C_SOURCE >= 199309L

DESCRIPTION

The sigaction() system call is used to change the action taken by a process on receipt of a specific
signal. (See signal(7) for an overview of signals.)

signum specifies the signal and can be any valid signal except SIGKILL and SIGSTOP.

If act is non-NULL, the new action for signal signum is installed from act. If oldact is non-NULL, the
previous action is saved in oldact.

The sigaction structure is defined as something like:

struct sigaction {
void (*sa_handler)(int);
void (*sa_sigaction)(int, siginfo_t *, void *);
sigset_t sa_mask;
int sa_flags;
void (*sa_restorer)(void);
};

On some architectures a union is involved: do not assign to both sa_handler and sa_sigaction.

The sa_restorer field is not intended for application use. (POSIX does not specify a sa_restorer field.)
Some further details of the purpose of this field can be found in sigreturn(2).

sa_handler specifies the action to be associated with signum and is be one of the following:

* SIG_DFL for the default action.

* SIG_IGN to ignore this signal.

* A pointer to a signal handling function. This function receives the signal number as its only
argument.

If SA_SIGINFO is specified in sa_flags, then sa_sigaction (instead of sa_handler) specifies the signal-
handling function for signum. This function receives three arguments, as described below.

sa_mask specifies a mask of signals which should be blocked (i.e., added to the signal mask of the thread
in which the signal handler is invoked) during execution of the signal handler. In addition, the signal
which triggered the handler will be blocked, unless the SA_NODEFER flag is used.

sa_flags specifies a set of flags which modify the behavior of the signal. It is formed by the bitwise
OR of zero or more of the following:

SA_NOCLDSTOP
If signum is SIGCHLD, do not receive notification when child processes stop (i.e., when they
receive one of SIGSTOP, SIGTSTP, SIGTTIN, or SIGTTOU) or resume (i.e., they receive SIGCONT) (see
wait(2)). This flag is meaningful only when establishing a handler for SIGCHLD.

SA_NOCLDWAIT (since Linux 2.6)
If signum is SIGCHLD, do not transform children into zombies when they terminate. See also
waitpid(2). This flag is meaningful only when establishing a handler for SIGCHLD, or when setting
that signal's disposition to SIG_DFL.

If the SA_NOCLDWAIT flag is set when establishing a handler for SIGCHLD, POSIX.1 leaves it
unspecified whether a SIGCHLD signal is generated when a child process terminates. On Linux, a
SIGCHLD signal is generated in this case; on some other implementations, it is not.

SA_NODEFER
Do not add the signal to the thread's signal mask while the handler is executing, unless the
signal is specified in act.sa_mask. Consequently, a further instance of the signal may be
delivered to the thread while it is executing the handler. This flag is meaningful only when
establishing a signal handler.

SA_NOMASK is an obsolete, nonstandard synonym for this flag.

SA_ONSTACK
Call the signal handler on an alternate signal stack provided by sigaltstack(2). If an alternate
stack is not available, the default stack will be used. This flag is meaningful only when
establishing a signal handler.

SA_RESETHAND
Restore the signal action to the default upon entry to the signal handler. This flag is
meaningful only when establishing a signal handler.

SA_ONESHOT is an obsolete, nonstandard synonym for this flag.

SA_RESTART
Provide behavior compatible with BSD signal semantics by making certain system calls restartable
across signals. This flag is meaningful only when establishing a signal handler. See signal(7)
for a discussion of system call restarting.

SA_RESTORER
Not intended for application use. This flag is used by C libraries to indicate that the
sa_restorer field contains the address of a "signal trampoline". See sigreturn(2) for more
details.

SA_SIGINFO (since Linux 2.2)
The signal handler takes three arguments, not one. In this case, sa_sigaction should be set
instead of sa_handler. This flag is meaningful only when establishing a signal handler.

The siginfo_t argument to a SA_SIGINFO handler
When the SA_SIGINFO flag is specified in act.sa_flags, the signal handler address is passed via the
act.sa_sigaction field. This handler takes three arguments, as follows:

void
handler(int sig, siginfo_t *info, void *ucontext)
{
...
}

These three arguments are as follows

sig The number of the signal that caused invocation of the handler.

info A pointer to a siginfo_t, which is a structure containing further information about the signal, as
described below.

ucontext
This is a pointer to a ucontext_t structure, cast to void *. The structure pointed to by this
field contains signal context information that was saved on the user-space stack by the kernel;
for details, see sigreturn(2). Further information about the ucontext_t structure can be found in
getcontext(3) and signal(7). Commonly, the handler function doesn't make any use of the third
argument.

The siginfo_t data type is a structure with the following fields:

siginfo_t {
int si_signo; /* Signal number */
int si_errno; /* An errno value */
int si_code; /* Signal code */
int si_trapno; /* Trap number that caused
hardware-generated signal
(unused on most architectures) */
pid_t si_pid; /* Sending process ID */
uid_t si_uid; /* Real user ID of sending process */
int si_status; /* Exit value or signal */
clock_t si_utime; /* User time consumed */
clock_t si_stime; /* System time consumed */
union sigval si_value; /* Signal value */
int si_int; /* POSIX.1b signal */
void *si_ptr; /* POSIX.1b signal */
int si_overrun; /* Timer overrun count;
POSIX.1b timers */
int si_timerid; /* Timer ID; POSIX.1b timers */
void *si_addr; /* Memory location which caused fault */
long si_band; /* Band event (was int in
glibc 2.3.2 and earlier) */
int si_fd; /* File descriptor */
short si_addr_lsb; /* Least significant bit of address
(since Linux 2.6.32) */
void *si_lower; /* Lower bound when address violation
occurred (since Linux 3.19) */
void *si_upper; /* Upper bound when address violation
occurred (since Linux 3.19) */
int si_pkey; /* Protection key on PTE that caused
fault (since Linux 4.6) */
void *si_call_addr; /* Address of system call instruction
(since Linux 3.5) */
int si_syscall; /* Number of attempted system call
(since Linux 3.5) */
unsigned int si_arch; /* Architecture of attempted system call
(since Linux 3.5) */
}

si_signo, si_errno and si_code are defined for all signals. (si_errno is generally unused on Linux.)
The rest of the struct may be a union, so that one should read only the fields that are meaningful for
the given signal:

* Signals sent with kill(2) and sigqueue(3) fill in si_pid and si_uid. In addition, signals sent with
sigqueue(3) fill in si_int and si_ptr with the values specified by the sender of the signal; see
sigqueue(3) for more details.

* Signals sent by POSIX.1b timers (since Linux 2.6) fill in si_overrun and si_timerid. The si_timerid
field is an internal ID used by the kernel to identify the timer; it is not the same as the timer ID
returned by timer_create(2). The si_overrun field is the timer overrun count; this is the same
information as is obtained by a call to timer_getoverrun(2). These fields are nonstandard Linux
extensions.

* Signals sent for message queue notification (see the description of SIGEV_SIGNAL in mq_notify(3)) fill
in si_int/si_ptr, with the sigev_value supplied to mq_notify(3); si_pid, with the process ID of the
message sender; and si_uid, with the real user ID of the message sender.

* SIGCHLD fills in si_pid, si_uid, si_status, si_utime, and si_stime, providing information about the
child. The si_pid field is the process ID of the child; si_uid is the child's real user ID. The
si_status field contains the exit status of the child (if si_code is CLD_EXITED), or the signal number
that caused the process to change state. The si_utime and si_stime contain the user and system CPU
time used by the child process; these fields do not include the times used by waited-for children
(unlike getrusage(2) and times(2)). In kernels up to 2.6, and since 2.6.27, these fields report CPU
time in units of sysconf(_SC_CLK_TCK). In 2.6 kernels before 2.6.27, a bug meant that these fields
reported time in units of the (configurable) system jiffy (see time(7)).

* SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP fill in si_addr with the address of the fault. On some
architectures, these signals also fill in the si_trapno field.

Some suberrors of SIGBUS, in particular BUS_MCEERR_AO and BUS_MCEERR_AR, also fill in si_addr_lsb.
This field indicates the least significant bit of the reported address and therefore the extent of the
corruption. For example, if a full page was corrupted, si_addr_lsb contains
log2(sysconf(_SC_PAGESIZE)). When SIGTRAP is delivered in response to a ptrace(2) event
(PTRACE_EVENT_foo), si_addr is not populated, but si_pid and si_uid are populated with the respective
process ID and user ID responsible for delivering the trap. In the case of seccomp(2), the tracee will
be shown as delivering the event. BUS_MCEERR_* and si_addr_lsb are Linux-specific extensions.

The SEGV_BNDERR suberror of SIGSEGV populates si_lower and si_upper.

The SEGV_PKUERR suberror of SIGSEGV populates si_pkey.

* SIGIO/SIGPOLL (the two names are synonyms on Linux) fills in si_band and si_fd. The si_band event is a
bit mask containing the same values as are filled in the revents field by poll(2). The si_fd field
indicates the file descriptor for which the I/O event occurred; for further details, see the
description of F_SETSIG in fcntl(2).

* SIGSYS, generated (since Linux 3.5) when a seccomp filter returns SECCOMP_RET_TRAP, fills in
si_call_addr, si_syscall, si_arch, si_errno, and other fields as described in seccomp(2).

The si_code field
The si_code field inside the siginfo_t argument that is passed to a SA_SIGINFO signal handler is a value
(not a bit mask) indicating why this signal was sent. For a ptrace(2) event, si_code will contain
SIGTRAP and have the ptrace event in the high byte:

(SIGTRAP | PTRACE_EVENT_foo << 8).

For a non-ptrace(2) event, the values that can appear in si_code are described in the remainder of this
section. Since glibc 2.20, the definitions of most of these symbols are obtained from <signal.h> by
defining feature test macros (before including any header file) as follows:

* _XOPEN_SOURCE with the value 500 or greater;

* _XOPEN_SOURCE and _XOPEN_SOURCE_EXTENDED; or

* _POSIX_C_SOURCE with the value 200809L or greater.

For the TRAP_* constants, the symbol definitions are provided only in the first two cases. Before glibc
2.20, no feature test macros were required to obtain these symbols.

For a regular signal, the following list shows the values which can be placed in si_code for any signal,
along with the reason that the signal was generated.

SI_USER
kill(2).

SI_KERNEL
Sent by the kernel.

SI_QUEUE
sigqueue(3).

SI_TIMER
POSIX timer expired.

SI_MESGQ (since Linux 2.6.6)
POSIX message queue state changed; see mq_notify(3).

SI_ASYNCIO
AIO completed.

SI_SIGIO
Queued SIGIO (only in kernels up to Linux 2.2; from Linux 2.4 onward SIGIO/SIGPOLL fills in
si_code as described below).

SI_TKILL (since Linux 2.4.19)
tkill(2) or tgkill(2).

The following values can be placed in si_code for a SIGILL signal:

ILL_ILLOPC
Illegal opcode.

ILL_ILLOPN
Illegal operand.

ILL_ILLADR
Illegal addressing mode.

ILL_ILLTRP
Illegal trap.

ILL_PRVOPC
Privileged opcode.

ILL_PRVREG
Privileged register.

ILL_COPROC
Coprocessor error.

ILL_BADSTK
Internal stack error.

The following values can be placed in si_code for a SIGFPE signal:

FPE_INTDIV
Integer divide by zero.

FPE_INTOVF
Integer overflow.

FPE_FLTDIV
Floating-point divide by zero.

FPE_FLTOVF
Floating-point overflow.

FPE_FLTUND
Floating-point underflow.

FPE_FLTRES
Floating-point inexact result.

FPE_FLTINV
Floating-point invalid operation.

FPE_FLTSUB
Subscript out of range.

The following values can be placed in si_code for a SIGSEGV signal:

SEGV_MAPERR
Address not mapped to object.

SEGV_ACCERR
Invalid permissions for mapped object.

SEGV_BNDERR (since Linux 3.19)
Failed address bound checks.

SEGV_PKUERR (since Linux 4.6)
Access was denied by memory protection keys. See pkeys(7). The protection key which applied
to this access is available via si_pkey.

The following values can be placed in si_code for a SIGBUS signal:

BUS_ADRALN
Invalid address alignment.

BUS_ADRERR
Nonexistent physical address.

BUS_OBJERR
Object-specific hardware error.

BUS_MCEERR_AR (since Linux 2.6.32)
Hardware memory error consumed on a machine check; action required.

BUS_MCEERR_AO (since Linux 2.6.32)
Hardware memory error detected in process but not consumed; action optional.

The following values can be placed in si_code for a SIGTRAP signal:

TRAP_BRKPT
Process breakpoint.

TRAP_TRACE
Process trace trap.

TRAP_BRANCH (since Linux 2.4, IA64 only)
Process taken branch trap.

TRAP_HWBKPT (since Linux 2.4, IA64 only)
Hardware breakpoint/watchpoint.

The following values can be placed in si_code for a SIGCHLD signal:

CLD_EXITED
Child has exited.

CLD_KILLED
Child was killed.

CLD_DUMPED
Child terminated abnormally.

CLD_TRAPPED
Traced child has trapped.

CLD_STOPPED
Child has stopped.

CLD_CONTINUED (since Linux 2.6.9)
Stopped child has continued.

The following values can be placed in si_code for a SIGIO/SIGPOLL signal:

POLL_IN
Data input available.

POLL_OUT
Output buffers available.

POLL_MSG
Input message available.

POLL_ERR
I/O error.

POLL_PRI
High priority input available.

POLL_HUP
Device disconnected.

The following value can be placed in si_code for a SIGSYS signal:

SYS_SECCOMP (since Linux 3.5)
Triggered by a seccomp(2) filter rule.

RETURN VALUE

       sigaction() returns 0 on success; on error, -1 is returned, and errno is set to indicate the error.

ERRORS

       EFAULT act or oldact points to memory which is not a valid part of the process address space.

       EINVAL An invalid signal was specified.  This will also be generated if an attempt is made to change  the
              action for SIGKILL or SIGSTOP, which cannot be caught or ignored.

CONFORMING TO

       POSIX.1-2001, POSIX.1-2008, SVr4.

NOTES

A child created via fork(2) inherits a copy of its parent's signal dispositions. During an execve(2),
the dispositions of handled signals are reset to the default; the dispositions of ignored signals are
left unchanged.

According to POSIX, the behavior of a process is undefined after it ignores a SIGFPE, SIGILL, or SIGSEGV
signal that was not generated by kill(2) or raise(3). Integer division by zero has undefined result. On
some architectures it will generate a SIGFPE signal. (Also dividing the most negative integer by -1 may
generate SIGFPE.) Ignoring this signal might lead to an endless loop.

POSIX.1-1990 disallowed setting the action for SIGCHLD to SIG_IGN. POSIX.1-2001 and later allow this
possibility, so that ignoring SIGCHLD can be used to prevent the creation of zombies (see wait(2)).
Nevertheless, the historical BSD and System V behaviors for ignoring SIGCHLD differ, so that the only
completely portable method of ensuring that terminated children do not become zombies is to catch the
SIGCHLD signal and perform a wait(2) or similar.

POSIX.1-1990 specified only SA_NOCLDSTOP. POSIX.1-2001 added SA_NOCLDSTOP, SA_NOCLDWAIT, SA_NODEFER,
SA_ONSTACK, SA_RESETHAND, SA_RESTART, and SA_SIGINFO. Use of these latter values in sa_flags may be less
portable in applications intended for older UNIX implementations.

The SA_RESETHAND flag is compatible with the SVr4 flag of the same name.

The SA_NODEFER flag is compatible with the SVr4 flag of the same name under kernels 1.3.9 and later. On
older kernels the Linux implementation allowed the receipt of any signal, not just the one we are
installing (effectively overriding any sa_mask settings).

sigaction() can be called with a NULL second argument to query the current signal handler. It can also
be used to check whether a given signal is valid for the current machine by calling it with NULL second
and third arguments.

It is not possible to block SIGKILL or SIGSTOP (by specifying them in sa_mask). Attempts to do so are
silently ignored.

See sigsetops(3) for details on manipulating signal sets.

See signal-safety(7) for a list of the async-signal-safe functions that can be safely called inside from
inside a signal handler.

C library/kernel differences
The glibc wrapper function for sigaction() gives an error (EINVAL) on attempts to change the disposition
of the two real-time signals used internally by the NPTL threading implementation. See nptl(7) for
details.

On architectures where the signal trampoline resides in the C library, the glibc wrapper function for
sigaction() places the address of the trampoline code in the act.sa_restorer field and sets the
SA_RESTORER flag in the act.sa_flags field. See sigreturn(2).

The original Linux system call was named sigaction(). However, with the addition of real-time signals in
Linux 2.2, the fixed-size, 32-bit sigset_t type supported by that system call was no longer fit for
purpose. Consequently, a new system call, rt_sigaction(), was added to support an enlarged sigset_t
type. The new system call takes a fourth argument, size_t sigsetsize, which specifies the size in bytes
of the signal sets in act.sa_mask and oldact.sa_mask. This argument is currently required to have the
value sizeof(sigset_t) (or the error EINVAL results). The glibc sigaction() wrapper function hides these
details from us, transparently calling rt_sigaction() when the kernel provides it.

Undocumented
Before the introduction of SA_SIGINFO, it was also possible to get some additional information about the
signal. This was done by providing an sa_handler signal handler with a second argument of type struct
sigcontext, which is the same structure as the one that is passed in the uc_mcontext field of the
ucontext structure that is passed (via a pointer) in the third argument of the sa_sigaction handler. See
the relevant Linux kernel sources for details. This use is obsolete now.

BUGS

       When delivering a signal with a SA_SIGINFO handler, the kernel does not always provide meaningful  values
       for all of the fields of the siginfo_t that are relevant for that signal.

       In  kernels up to and including 2.6.13, specifying SA_NODEFER in sa_flags prevents not only the delivered
       signal from being masked during execution of the handler, but also  the  signals  specified  in  sa_mask.
       This bug was fixed in kernel 2.6.14.

EXAMPLES

       See mprotect(2).

COLOPHON

       This  page  is  part  of  release  5.10  of  the  Linux man-pages project.  A description of the project,
       information  about  reporting  bugs,  and  the  latest  version  of  this   page,   can   be   found   at
       https://www.kernel.org/doc/man-pages/.