Provided by: postfix-ldap_3.6.4-1ubuntu1.3_amd64 bug

NAME

       ldap_table - Postfix LDAP client configuration

SYNOPSIS

       postmap -q "string" ldap:/etc/postfix/filename

       postmap -q - ldap:/etc/postfix/filename <inputfile

DESCRIPTION

       The  Postfix mail system uses optional tables for address rewriting or mail routing. These
       tables are usually in dbm or db format.

       Alternatively, lookup tables can be specified as LDAP databases.

       In order to use LDAP lookups, define an LDAP source as a  lookup  table  in  main.cf,  for
       example:

           alias_maps = ldap:/etc/postfix/ldap-aliases.cf

       The file /etc/postfix/ldap-aliases.cf has the same format as the Postfix main.cf file, and
       can specify the parameters described below. An example is given at the end of this manual.

       This configuration method is available with  Postfix  version  2.1  and  later.   See  the
       section "OBSOLETE MAIN.CF PARAMETERS" below for older Postfix versions.

       For details about LDAP SSL and STARTTLS, see the section on SSL and STARTTLS below.

LIST MEMBERSHIP

       When  using  LDAP  to  store  lists  such  as $mynetworks, $mydestination, $relay_domains,
       $local_recipient_maps, etc., it is important to understand that the table must store  each
       list  member  as a separate key. The table lookup verifies the *existence* of the key. See
       "Postfix lists versus tables" in the DATABASE_README document for a discussion.

       Do NOT  create  tables  that  return  the  full  list  of  domains  in  $mydestination  or
       $relay_domains etc., or IP addresses in $mynetworks.

       DO  create  tables with each matching item as a key and with an arbitrary value. With LDAP
       databases it is not uncommon to return the key itself.

       For example, NEVER do this in a map defining $mydestination:

           query_filter = domain=*
           result_attribute = domain

       Do this instead:

           query_filter = domain=%s
           result_attribute = domain

GENERAL LDAP PARAMETERS

       In the text below, default values are given in parentheses.  Note:  don't  use  quotes  in
       these  variables; at least, not until the Postfix configuration routines understand how to
       deal with quoted strings.

       server_host (default: localhost)
              The name of the host running the LDAP server, e.g.

                  server_host = ldap.example.com

              Depending on the LDAP client library you're using, it should be possible to specify
              multiple  servers  here, with the library trying them in order should the first one
              fail. It should also be possible to give each server in the list a  different  port
              (overriding server_port below), by naming them like

                  server_host = ldap.example.com:1444

              With  OpenLDAP,  a  (list of) LDAP URLs can be used to specify both the hostname(s)
              and the port(s):

                  server_host = ldap://ldap.example.com:1444
                              ldap://ldap2.example.com:1444

              All LDAP URLs accepted by the OpenLDAP library are supported, including connections
              over  UNIX  domain  sockets,  and LDAP SSL (the last one provided that OpenLDAP was
              compiled with support for SSL):

                  server_host = ldapi://%2Fsome%2Fpath
                              ldaps://ldap.example.com:636

       server_port (default: 389)
              The port the LDAP server listens on, e.g.

                  server_port = 778

       timeout (default: 10 seconds)
              The number of seconds a search can take before timing out, e.g.

                  timeout = 5

       search_base (No default; you must configure this)
              The RFC2253 base DN at which to conduct the search, e.g.

                  search_base = dc=your, dc=com

              With Postfix 2.2 and later this parameter supports the following '%' expansions:

              %%     This is replaced by a literal '%' character.

              %s     This is replaced by the input key.  RFC 2253 quoting is used  to  make  sure
                     that the input key does not add unexpected metacharacters.

              %u     When  the input key is an address of the form user@domain, %u is replaced by
                     the (RFC 2253) quoted local part of the address.  Otherwise, %u is  replaced
                     by  the  entire  search  string.   If  the localpart is empty, the search is
                     suppressed and returns no results.

              %d     When the input key is an address of the form user@domain, %d is replaced  by
                     the  (RFC 2253) quoted domain part of the address.  Otherwise, the search is
                     suppressed and returns no results.

              %[SUD] For the search_base parameter,  the  upper-case  equivalents  of  the  above
                     expansions  behave  identically  to their lower-case counter-parts. With the
                     result_format   parameter   (previously   called   result_filter   see   the
                     COMPATIBILITY   section   and  below),  they  expand  to  the  corresponding
                     components of input key rather than the result value.

              %[1-9] The patterns  %1,  %2,  ...  %9  are  replaced  by  the  corresponding  most
                     significant  component  of  the  input  key's  domain.  If  the input key is
                     user@mail.example.com, then %1 is com, %2 is example and %3 is mail. If  the
                     input  key  is  unqualified  or  does  not  have enough domain components to
                     satisfy all the specified patterns, the search is suppressed and returns  no
                     results.

       query_filter (default: mailacceptinggeneralid=%s)
              The  RFC2254  filter used to search the directory, where %s is a substitute for the
              address Postfix is trying to resolve, e.g.

                  query_filter = (&(mail=%s)(paid_up=true))

              This parameter supports the following '%' expansions:

              %%     This is replaced by a literal '%' character. (Postfix 2.2 and later).

              %s     This is replaced by the input key.  RFC 2254 quoting is used  to  make  sure
                     that the input key does not add unexpected metacharacters.

              %u     When  the input key is an address of the form user@domain, %u is replaced by
                     the (RFC 2254) quoted local part of the address.  Otherwise, %u is  replaced
                     by  the  entire  search  string.   If  the localpart is empty, the search is
                     suppressed and returns no results.

              %d     When the input key is an address of the form user@domain, %d is replaced  by
                     the  (RFC 2254) quoted domain part of the address.  Otherwise, the search is
                     suppressed and returns no results.

              %[SUD] The  upper-case  equivalents  of  the  above  expansions   behave   in   the
                     query_filter  parameter  identically to their lower-case counter-parts. With
                     the  result_format  parameter  (previously  called  result_filter  see   the
                     COMPATIBILITY   section   and  below),  they  expand  to  the  corresponding
                     components of input key rather than the result value.

                     The above %S, %U and %D expansions are available with Postfix 2.2 and later.

              %[1-9] The patterns  %1,  %2,  ...  %9  are  replaced  by  the  corresponding  most
                     significant  component  of  the  input  key's  domain.  If  the input key is
                     user@mail.example.com, then %1 is com, %2 is example and %3 is mail. If  the
                     input  key  is  unqualified  or  does  not  have enough domain components to
                     satisfy all the specified patterns, the search is suppressed and returns  no
                     results.

                     The above %1, ..., %9 expansions are available with Postfix 2.2 and later.

              The  "domain"  parameter  described  below  limits  the  input keys to addresses in
              matching domains. When the  "domain"  parameter  is  non-empty,  LDAP  queries  for
              unqualified  addresses  or  addresses  in  non-matching  domains are suppressed and
              return no results.

              NOTE: DO NOT put quotes around the query_filter parameter.

       result_format (default: %s)
              Called result_filter in Postfix releases prior to 2.2.  Format template applied  to
              result  attributes.  Most  commonly used to append (or prepend) text to the result.
              This parameter supports the following '%' expansions:

              %%     This is replaced by a literal '%' character. (Postfix 2.2 and later).

              %s     This is replaced by the value of the result attribute. When result is  empty
                     it is skipped.

              %u     When the result attribute value is an address of the form user@domain, %u is
                     replaced by the local part of the address. When  the  result  has  an  empty
                     localpart it is skipped.

              %d     When  a  result attribute value is an address of the form user@domain, %d is
                     replaced by the domain part of the  attribute  value.  When  the  result  is
                     unqualified it is skipped.

              %[SUD1-9]
                     The  upper-case  and  decimal  digit expansions interpolate the parts of the
                     input key rather than the  result.  Their  behavior  is  identical  to  that
                     described  with  query_filter, and in fact because the input key is known in
                     advance, lookups whose key does not contain all the information specified in
                     the result template are suppressed and return no results.

                     The  above  %S, %U, %D and %1, ..., %9 expansions are available with Postfix
                     2.2 and later.

              For example, using "result_format  =  smtp:[%s]"  allows  one  to  use  a  mailHost
              attribute  as  the basis of a transport(5) table. After applying the result format,
              multiple values are concatenated as comma separated  strings.  The  expansion_limit
              and  size_limit  parameters  explained  below  allow  one to restrict the number of
              values in the result, which is especially useful for  maps  that  should  return  a
              single value.

              The default value %s specifies that each attribute value should be used as is.

              This  parameter  was  called  result_filter in Postfix releases prior to 2.2. If no
              "result_format" is specified, the value of "result_filter"  will  be  used  instead
              before  resorting  to  the  default  value.  This  provides  compatibility with old
              configuration files.

              NOTE: DO NOT put quotes around the result format!

       domain (default: no domain list)
              This is a list of domain names, paths to files, or  dictionaries.  When  specified,
              only fully qualified search keys with a *non-empty* localpart and a matching domain
              are eligible for lookup: 'user' lookups, bare domain lookups and "@domain"  lookups
              are not performed. This can significantly reduce the query load on the LDAP server.

                  domain = postfix.org, hash:/etc/postfix/searchdomains

              It is best not to use LDAP to store the domains eligible for LDAP lookups.

              NOTE: DO NOT define this parameter for local(8) aliases.

              This feature is available in Postfix 1.0 and later.

       result_attribute (default: maildrop)
              The  attribute(s)  Postfix  will  read  from  any directory entries returned by the
              lookup, to be resolved to an email address.

                  result_attribute = mailbox, maildrop

              Don't rely on the default value ("maildrop"). Set the  result_attribute  explicitly
              in  all  ldap  table  configuration  files.  This  is particularly relevant when no
              result_attribute is applicable, e.g. cases in  which  leaf_result_attribute  and/or
              terminal_result_attribute  are  used  instead.  The  default  value  is harmless if
              "maildrop" is also listed as a leaf or terminal result attribute, but it is best to
              not leave this to chance.

       special_result_attribute (default: empty)
              The  attribute(s)  of directory entries that can contain DNs or RFC 2255 LDAP URLs.
              If found, a recursive search is performed to retrieve the entry referenced  by  the
              DN, or the entries matched by the URL query.

                  special_result_attribute = memberdn

              DN  recursion retrieves the same result_attributes as the main query, including the
              special attributes for further recursion.

              URL processing retrieves only those attributes that are included in  both  the  URL
              definition  and  as  result attributes (ordinary, special, leaf or terminal) in the
              Postfix table definition.  If the URL lists  any  of  the  table's  special  result
              attributes,  these  are retrieved and used recursively. A URL that does not specify
              any attribute selection, is equivalent  (RFC  2255)  to  a  URL  that  selects  all
              attributes,  in  which  case the selected attributes will be the full set of result
              attributes in the Postfix table.

              If an LDAP URL attribute-descriptor or the corresponding Postfix LDAP table  result
              attribute  (but  not  both)  uses  RFC  2255  sub-type options ("attr;option"), the
              attribute requested from the LDAP server will include the sub-type option.  In  all
              other  cases,  the  URL  attribute  and  the  table  attribute  must match exactly.
              Attributes with options in both the URL and the Postfix table  are  requested  only
              when  the  options are identical. LDAP attribute-descriptor options are very rarely
              used, most LDAP users will not need  to  concern  themselves  with  this  level  of
              nuanced detail.

       terminal_result_attribute (default: empty)
              When  one  or more terminal result attributes are found in an LDAP entry, all other
              result attributes are ignored and only the terminal result attributes are returned.
              This  is  useful for delegating expansion of group members to a particular host, by
              using an optional "maildrop" attribute on selected groups to route the group  to  a
              specific  host,  where  the group is expanded, possibly via mailing-list manager or
              other special processing.

                  result_attribute =
                  terminal_result_attribute = maildrop

              When using terminal and/or leaf result attributes, the result_attribute is best set
              to an empty value when it is not used, or else explicitly set to the desired value,
              even if it is the default value "maildrop".

              This feature is available with Postfix 2.4 or later.

       leaf_result_attribute (default: empty)
              When one or more special result attributes are found in a non-terminal (see  above)
              LDAP  entry,  leaf result attributes are excluded from the expansion of that entry.
              This is useful when expanding groups and the desired mail address  attribute(s)  of
              the  member  objects obtained via DN or URI recursion are also present in the group
              object. To only return the attribute values from  the  leaf  objects  and  not  the
              containing  group, add the attribute to the leaf_result_attribute list, and not the
              result_attribute list, which  is  always  expanded.  Note,  the  default  value  of
              "result_attribute" is not empty, you may want to set it explicitly empty when using
              "leaf_result_attribute" to expand the group to a list of member  DN  addresses.  If
              groups  have  both  member  DN  references AND attributes that hold multiple string
              valued rfc822 addresses, then the string attributes go in "result_attribute".   The
              attributes  that  represent  the email addresses of objects referenced via a DN (or
              LDAP URI) go in "leaf_result_attribute".

                  result_attribute = memberaddr
                  special_result_attribute = memberdn
                  terminal_result_attribute = maildrop
                  leaf_result_attribute = mail

              When using terminal and/or leaf result attributes, the result_attribute is best set
              to an empty value when it is not used, or else explicitly set to the desired value,
              even if it is the default value "maildrop".

              This feature is available with Postfix 2.4 or later.

       scope (default: sub)
              The LDAP search scope: sub, base, or one.  These translate into LDAP_SCOPE_SUBTREE,
              LDAP_SCOPE_BASE, and LDAP_SCOPE_ONELEVEL.

       bind (default: yes)
              Whether or how to bind to the LDAP server. Newer LDAP implementations don't require
              clients to bind, which saves time. Example:

                  # Don't bind
                  bind = no
                  # Use SIMPLE bind
                  bind = yes
                  # Use SASL bind
                  bind = sasl

              Postfix versions prior to 2.8 only support "bind = no" which means don't bind,  and
              "bind  =  yes"  which  means do a SIMPLE bind.  Postfix 2.8 and later also supports
              "bind = SASL" when compiled with LDAP SASL support as described in LDAP_README,  it
              also  adds the synonyms "bind = none" and "bind = simple" for "bind = no" and "bind
              = yes" respectively. See the SASL section below for additional parameters available
              with "bind = sasl".

              If  you  do  need to bind, you might consider configuring Postfix to connect to the
              local machine on a port that's an SSL tunnel to your  LDAP  server.  If  your  LDAP
              server  doesn't  natively  support  SSL, put a tunnel (wrapper, proxy, whatever you
              want to call it) on  that  system  too.  This  should  prevent  the  password  from
              traversing the network in the clear.

       bind_dn (default: empty)
              If you do have to bind, do it with this distinguished name. Example:

                  bind_dn = uid=postfix, dc=your, dc=com
              With  "bind  =  sasl"  (see above) the DN may be optional for some SASL mechanisms,
              don't specify a DN if not needed.

       bind_pw (default: empty)
              The password for the distinguished name  above.  If  you  have  to  use  this,  you
              probably want to make the map configuration file readable only by the Postfix user.
              When using the obsolete ldap:ldapsource syntax, with map parameters in main.cf,  it
              is  not possible to securely store the bind password. This is because main.cf needs
              to be world readable to allow local  accounts  to  submit  mail  via  the  sendmail
              command. Example:

                  bind_pw = postfixpw
              With  "bind  =  sasl"  (see  above)  the  password  may  be  optional for some SASL
              mechanisms, don't specify a password if not needed.

       cache (IGNORED with a warning)

       cache_expiry (IGNORED with a warning)

       cache_size (IGNORED with a warning)
              The above parameters are NO LONGER SUPPORTED by Postfix.  Cache  support  has  been
              dropped from OpenLDAP as of release 2.1.13.

       recursion_limit (default: 1000)
              A limit on the nesting depth of DN and URL special result attribute evaluation. The
              limit must be a non-zero positive number.

       expansion_limit (default: 0)
              A limit on the total number of result elements returned (as a comma separated list)
              by  a  lookup  against the map.  A setting of zero disables the limit. Lookups fail
              with a temporary error if the limit is exceeded.  Setting the limit  to  1  ensures
              that lookups do not return multiple values.

       size_limit (default: $expansion_limit)
              A  limit on the number of LDAP entries returned by any single LDAP search performed
              as part of the lookup. A setting of 0 disables the limit.  Expansion of DN and  URL
              references  involves  nested LDAP queries, each of which is separately subjected to
              this limit.

              Note: even a single LDAP entry can generate multiple lookup results,  via  multiple
              result  attributes  and/or  multi-valued result attributes. This limit caps the per
              search resource utilization on the LDAP server, not the final multiplicity  of  the
              lookup result. It is analogous to the "-z" option of "ldapsearch".

       dereference (default: 0)
              When  to  dereference  LDAP  aliases.  (Note  that this has nothing do with Postfix
              aliases.)  The  permitted  values  are  those  legal  for  the   OpenLDAP/UM   LDAP
              implementations:

              0      never

              1      when searching

              2      when locating the base object for the search

              3      always

              See ldap.h or the ldap_open(3) or ldapsearch(1) man pages for more information. And
              if you're using an LDAP package that has other possible values, please bring it  to
              the attention of the postfix-users@postfix.org mailing list.

       chase_referrals (default: 0)
              Sets (or clears) LDAP_OPT_REFERRALS (requires LDAP version 3 support).

       version (default: 3)
              Specifies the LDAP protocol version to use.

       debuglevel (default: 0)
              What level to set for debugging in the OpenLDAP libraries.

LDAP SASL PARAMETERS

       If  you're  using the OpenLDAP libraries compiled with SASL support, Postfix 2.8 and later
       built with LDAP SASL support as described in LDAP_README can authenticate to LDAP  servers
       via SASL.

       This  enables  authentication  to  the  LDAP  server  via  mechanisms  other than a simple
       password. The added flexibility has a cost: it is no longer practical to set  an  explicit
       timeout  on  the  duration  of an LDAP bind operation. Under adverse conditions, whether a
       SASL bind times out, or if it does, the duration of the timeout is determined by the  LDAP
       and SASL libraries.

       It  is  best  to  use  tables that use SASL binds via proxymap(8), this way the requesting
       process can time-out  the  proxymap  request.  This  also  lets  you  tailer  the  process
       environment  by  overriding  the  proxymap(8)  import_environment setting in master.cf(5).
       Special environment settings may be needed to configure GSSAPI credential caches or  other
       SASL  mechanism specific options. The GSSAPI credentials used for LDAP lookups may need to
       be different than say those used for the Postfix SMTP client  to  authenticate  to  remote
       servers.

       Using  SASL mechanisms requires LDAP protocol version 3, the default protocol version is 2
       for backwards compatibility. You must set "version = 3" in addition to "bind = sasl".

       The following parameters are relevant to using LDAP with SASL

       sasl_mechs (default: empty)
              Space separated list of SASL mechanism(s) to try.

       sasl_realm (default: empty)
              SASL Realm to use, if applicable.

       sasl_authz_id (default: empty)
              The SASL authorization identity to assert, if applicable.

       sasl_minssf (default: 0)
              The minimum required sasl security factor required to establish a connection.

LDAP SSL AND STARTTLS PARAMETERS

       If you're using the OpenLDAP libraries compiled with SSL support, Postfix can  connect  to
       LDAP SSL servers and can issue the STARTTLS command.

       LDAP SSL service can be requested by using a LDAP SSL URL in the server_host parameter:

           server_host = ldaps://ldap.example.com:636

       STARTTLS can be turned on with the start_tls parameter:

           start_tls = yes

       Both forms require LDAP protocol version 3, which has to be set explicitly with:

           version = 3

       If  any  of  the  Postfix  programs  querying  the  map  is configured in master.cf to run
       chrooted, all the certificates and keys involved have to be copied to the chroot jail.  Of
       course, the private keys should only be readable by the user "postfix".

       The following parameters are relevant to LDAP SSL and STARTTLS:

       start_tls (default: no)
              Whether  or  not  to  issue STARTTLS upon connection to the server.  Don't set this
              with LDAP SSL (the SSL session is setup automatically when the  TCP  connection  is
              opened).

       tls_ca_cert_dir (No default; set either this or tls_ca_cert_file)
              Directory  containing X509 Certification Authority certificates in PEM format which
              are to be recognized by the client in SSL/TLS connections. The files  each  contain
              one  CA  certificate.   The  files are looked up by the CA subject name hash value,
              which must hence be available. If more than one CA certificate with the  same  name
              hash  value  exist,  the  extension  must be different (e.g. 9d66eef0.0, 9d66eef0.1
              etc). The search is performed in the ordering of the extension  number,  regardless
              of other properties of the certificates. Use the c_rehash utility (from the OpenSSL
              distribution) to create the necessary links.

       tls_ca_cert_file (No default; set either this or tls_ca_cert_dir)
              File containing the X509 Certification Authority certificates in PEM  format  which
              are  to  be  recognized  by  the  client in SSL/TLS connections. This setting takes
              precedence over tls_ca_cert_dir.

       tls_cert (No default; you must set this)
              File containing client's X509 certificate to be used by  the  client  in  SSL/  TLS
              connections.

       tls_key (No default; you must set this)
              File containing the private key corresponding to the above tls_cert.

       tls_require_cert (default: no)
              Whether  or  not  to  request server's X509 certificate and check its validity when
              establishing SSL/TLS connections.  The supported values are no and yes.

              With no, the server certificate trust chain is not checked, but with OpenLDAP prior
              to  2.1.13,  the  name  in  the server certificate must still match the LDAP server
              name. With OpenLDAP 2.0.0 to 2.0.11 the server name is  not  necessarily  what  you
              specified,  rather  it is determined (by reverse lookup) from the IP address of the
              LDAP server connection.  With  OpenLDAP  prior  to  2.0.13,  subjectAlternativeName
              extensions  in  the LDAP server certificate are ignored: the server name must match
              the  subject  CommonName.  The  no  setting  corresponds  to  the  never  value  of
              TLS_REQCERT in LDAP client configuration files.

              Don't  use  TLS  with OpenLDAP 2.0.x (and especially with x <= 11) if you can avoid
              it.

              With yes, the server certificate must be  issued  by  a  trusted  CA,  and  not  be
              expired.  The  LDAP  server  name  must  match  one  of  the  name(s)  found in the
              certificate (see above for OpenLDAP library version dependent  behavior).  The  yes
              setting corresponds to the demand value of TLS_REQCERT in LDAP client configuration
              files.

              The "try" and "allow" values of TLS_REQCERT have no equivalents here. They are  not
              available with OpenLDAP 2.0, and in any case have questionable security properties.
              Either you want TLS verified LDAP connections, or you don't.

              The yes value only works correctly with Postfix 2.5 and  later,  or  with  OpenLDAP
              2.0.  Earlier  Postfix releases or later OpenLDAP releases don't work together with
              this setting. Support for LDAP over TLS was added to Postfix based on the  OpenLDAP
              2.0 API.

       tls_random_file (No default)
              Path  of a file to obtain random bits from when /dev/[u]random is not available, to
              be used by the client in SSL/TLS connections.

       tls_cipher_suite (No default)
              Cipher suite to use in SSL/TLS negotiations.

EXAMPLE

       Here's a basic example for using LDAP  to  look  up  local(8)  aliases.   Assume  that  in
       main.cf, you have:

           alias_maps = hash:/etc/aliases,
                   ldap:/etc/postfix/ldap-aliases.cf

       and in ldap:/etc/postfix/ldap-aliases.cf you have:

           server_host = ldap.example.com
           search_base = dc=example, dc=com

       Upon  receiving  mail  for a local address "ldapuser" that isn't found in the /etc/aliases
       database, Postfix will search the LDAP server listening at port 389  on  ldap.example.com.
       It  will  bind  anonymously, search for any directory entries whose mailacceptinggeneralid
       attribute is "ldapuser", read the "maildrop" attributes of those found, and build  a  list
       of their maildrops, which will be treated as RFC822 addresses to which the message will be
       delivered.

OBSOLETE MAIN.CF PARAMETERS

       For backwards compatibility with Postfix version 2.0 and earlier, LDAP parameters can also
       be defined in main.cf.  Specify as LDAP source a name that doesn't begin with a slash or a
       dot.  The LDAP parameters will then be accessible as the name you've given the  source  in
       its  definition, an underscore, and the name of the parameter.  For example, if the map is
       specified as "ldap:ldapsource", the "server_host" parameter  below  would  be  defined  in
       main.cf as "ldapsource_server_host".

       Note:  with this form, the passwords for the LDAP sources are written in main.cf, which is
       normally world-readable.  Support for this form  will  be  removed  in  a  future  Postfix
       version.

OTHER OBSOLETE FEATURES

       For  backwards  compatibility  with the pre 2.2 LDAP clients, result_filter can for now be
       used instead of result_format, when the latter parameter is not also set.   The  new  name
       better reflects the function of the parameter. This compatibility interface may be removed
       in a future release.

SEE ALSO

       postmap(1), Postfix lookup table manager
       postconf(5), configuration parameters
       mysql_table(5), MySQL lookup tables
       pgsql_table(5), PostgreSQL lookup tables

README FILES

       Use "postconf readme_directory" or "postconf html_directory" to locate this information.
       DATABASE_README, Postfix lookup table overview
       LDAP_README, Postfix LDAP client guide

LICENSE

       The Secure Mailer license must be distributed with this software.

AUTHOR(S)

       Carsten Hoeger, Hery Rakotoarisoa, John Hensley,  Keith  Stevenson,  LaMont  Jones,  Liviu
       Daia,  Manuel  Guesdon,  Mike  Mattice,  Prabhat  K Singh, Sami Haahtinen, Samuel Tardieu,
       Victor Duchovni, and many others.

                                                                                    LDAP_TABLE(5)