Provided by: ncurses-bin_6.3-2ubuntu0.1_amd64 bug

NAME

       user_caps - user-defined terminfo capabilities

SYNOPSIS

       tic -x, infocmp -x

DESCRIPTION

   Background
       Before  ncurses  5.0,  terminfo databases used a fixed repertoire of terminal capabilities
       designed for the SVr2 terminal database in 1984,  and  extended  in  stages  through  SVr4
       (1989), and standardized in the Single Unix Specification beginning in 1995.

       Most  of  the extensions in this fixed repertoire were additions to the tables of boolean,
       numeric  and  string  capabilities.   Rather  than  change  the  meaning  of  an  existing
       capability,  a  new  name  was  added.  The terminfo database uses a binary format; binary
       compatibility was ensured by using a header which gave the number of items in  the  tables
       for each type of capability.  The standardization was incomplete:

       •   The  binary  format  itself is not described in the X/Open Curses documentation.  Only
           the source format is described.

           Library developers rely upon  the  SVr4  documentation,  and  reverse-engineering  the
           compiled terminfo files to match the binary format.

       •   Lacking  a  standard  for the binary format, most implementations copy the SVr2 binary
           format, which uses 16-bit signed integers, and is limited to 4096-byte entries.

           The format cannot represent very large numeric  capabilities,  nor  can  it  represent
           large numbers of special keyboard definitions.

       •   The tables of capability names differ between implementations.

           Although  they  may  provide all of the standard capability names, the position in the
           tables differs because some features were added as needed,  while  others  were  added
           (out of order) to comply with X/Open Curses.

           While  ncurses' repertoire of predefined capabilities is closest to Solaris, Solaris's
           terminfo database has a few differences from the list published by X/Open Curses.  For
           example,  ncurses can be configured with tables which match the terminal databases for
           AIX, HP-UX or OSF/1, rather than the default Solaris-like configuration.

       •   In SVr4 curses and ncurses, the terminal database is defined at compile-time  using  a
           text file which lists the different terminal capabilities.

           In  principle,  the text-file can be extended, but doing this requires recompiling and
           reinstalling the library.  The text-file used in  ncurses  for  terminal  capabilities
           includes  details for various systems past the documented X/Open Curses features.  For
           example, ncurses supports these capabilities in each configuration:

               memory_lock
                    (meml) lock memory above cursor

               memory_unlock
                    (memu) unlock memory

               box_chars_1
                    (box1) box characters primary set

           The memory lock/unlock capabilities were included because they were used in the  X11R6
           terminal  description  for  xterm.   The  box1  capability is used in tic to help with
           terminal descriptions written for AIX.

       During the 1990s, some users were reluctant to use terminfo in spite  of  its  performance
       advantages over termcap:

       •   The  fixed  repertoire prevented users from adding features for unanticipated terminal
           improvements (or required them to reuse existing capabilities as a workaround).

       •   The limitation to 16-bit signed integers was also mentioned.  Because  termcap  stores
           everything as a string, it could represent larger numbers.

       Although  termcap's  extensibility  was  rarely  used  (it  was  never the speaker who had
       actually used the feature), the criticism had a point.  ncurses  5.0  provided  a  way  to
       detect  nonstandard  capabilities,  determine their type and optionally store and retrieve
       them in a way which did not interfere with other applications.  These are referred  to  as
       user-defined  capabilities because no modifications to the toolset's predefined capability
       names are needed.

       The ncurses utilities tic and infocmp have a command-line option “-x” to  control  whether
       the   nonstandard   capabilities   are   stored   or   retrieved.    A   library  function
       use_extended_names is provided for the same purpose.

       When compiling a terminal database,  if  “-x”  is  set,  tic  will  store  a  user-defined
       capability if the capability name is not one of the predefined names.

       Because  ncurses provides a termcap library interface, these user-defined capabilities may
       be visible to termcap applications:

       •   The termcap  interface  (like  all  implementations  of  termcap)  requires  that  the
           capability names are 2-characters.

           When  the capability is simple enough for use in a termcap application, it is provided
           as a 2-character name.

       •   There are other user-defined capabilities  which  refer  to  features  not  usable  in
           termcap,  e.g.,  parameterized  strings  that use more than two parameters or use more
           than the trivial expression support provided by  termcap.   For  these,  the  terminfo
           database should have only capability names with 3 or more characters.

       •   Some  terminals  can  send  distinct  strings  for  special  keys (cursor-, keypad- or
           function-keys) depending on modifier keys (shift, control, etc.).  While terminfo  and
           termcap  have a set of 60 predefined function-key names, to which a series of keys can
           be assigned, that is insufficient for more than a dozen keys multiplied by more than a
           couple  of  modifier  combinations.   The  ncurses database uses a convention based on
           xterm to provide extended special-key names.

           Fitting that into termcap's limitation of 2-character names would be pointless.  These
           extended keys are available only with terminfo.

   Recognized capabilities
       The ncurses library uses the user-definable capabilities.  While the terminfo database may
       have other extensions, ncurses makes explicit checks for these:

          AX boolean, asserts that the terminal interprets SGR 39 and SGR  49  by  resetting  the
             foreground and background color, respectively, to the default.

             This is a feature recognized by the screen program as well.

          E3 string,  tells  how  to  clear  the terminal's scrollback buffer.  When present, the
             clear(1) program sends this before clearing the terminal.

             The command “tput clear” does the same thing.

          RGB
             boolean, number or string, to assert that the set_a_foreground and  set_a_background
             capabilities  correspond to direct colors, using an RGB (red/green/blue) convention.
             This capability allows the  color_content  function  to  return  appropriate  values
             without requiring the application to initialize colors using init_color.

             The capability type determines the values which ncurses sees:

             boolean
                implies  that the number of bits for red, green and blue are the same.  Using the
                maximum number of colors, ncurses adds  two,  divides  that  sum  by  three,  and
                assigns the result to red, green and blue in that order.

                If the number of bits needed for the number of colors is not a multiple of three,
                the blue (and green) components lose in comparison to red.

             number
                tells ncurses what result to add to red, green and blue.  If ncurses runs out  of
                bits, blue (and green) lose just as in the boolean case.

             string
                explicitly  list  the number of bits used for red, green and blue components as a
                slash-separated list of decimal integers.

             Because there are several RGB encodings in use, applications which make  assumptions
             about  the  number  of  bits  per color are unlikely to work reliably.  As a trivial
             case, for example, one could define RGB#1  to  represent  the  standard  eight  ANSI
             colors, i.e., one bit per color.

          U8 number,  asserts  that  ncurses must use Unicode values for line-drawing characters,
             and that it should ignore the alternate character set capabilities when  the  locale
             uses    UTF-8   encoding.    For   more   information,   see   the   discussion   of
             NCURSES_NO_UTF8_ACS in ncurses(3X).

             Set this capability to a nonzero value to enable it.

          XM string, override ncurses's built-in string which enables/disables xterm mouse mode.

             ncurses sends a character sequence to the terminal to  initialize  mouse  mode,  and
             when  the  user  clicks  the  mouse  buttons  or (in certain modes) moves the mouse,
             handles the characters sent back by the terminal to tell it what was done  with  the
             mouse.

             The  mouse  protocol  is  enabled  when the mask passed in the mousemask function is
             nonzero.  By default,  ncurses  handles  the  responses  for  the  X11  xterm  mouse
             protocol.   It  also  knows  about the SGR 1006 xterm mouse protocol, but must to be
             told to look for this specifically.  It will not be able  to  guess  which  mode  is
             used, because the responses are enough alike that only confusion would result.

             The  XM capability has a single parameter.  If nonzero, the mouse protocol should be
             enabled.  If zero, the mouse protocol should be  disabled.   ncurses  inspects  this
             capability  if  it  is present, to see whether the 1006 protocol is used.  If so, it
             expects the responses to use the SGR 1006 xterm mouse protocol.

             The xterm mouse protocol is used by other terminal emulators.  The terminal database
             uses  building-blocks  for  the  various  xterm mouse protocols which can be used in
             customized terminal descriptions.

             The  terminal  database  building  blocks  for  this  mouse  feature  also  have  an
             experimental  capability  xm.   The  “xm”  capability  describes the mouse response.
             Currently there is no interpreter which would use this information to make the mouse
             support completely data-driven.

             xm  shows  the  format of the mouse responses.  In this experimental capability, the
             parameters are

               p1   y-ordinate

               p2   x-ordinate

               p3   button

               p4   state, e.g., pressed or released

               p5   y-ordinate starting region

               p6   x-ordinate starting region

               p7   y-ordinate ending region

               p8   x-ordinate ending region

             Here are examples from the terminal database for the most commonly used xterm  mouse
             protocols:

               xterm+x11mouse|X11 xterm mouse protocol,
                       kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
                       xm=\E[M
                          %?%p4%t%p3%e%{3}%;%' '%+%c
                          %p2%'!'%+%c
                          %p1%'!'%+%c,

               xterm+sm+1006|xterm SGR-mouse,
                       kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
                       xm=\E[<%i%p3%d;
                          %p1%d;
                          %p2%d;
                          %?%p4%tM%em%;,

   Extended key-definitions
       Several  terminals  provide  the  ability  to  send  distinct  strings for combinations of
       modified special keys.  There is no standard for what those keys can send.

       Since 1999, xterm has supported shift, control, alt,  and  meta  modifiers  which  produce
       distinct special-key strings.  In a terminal description, ncurses has no special knowledge
       of the modifiers used.  Applications can use the naming convention established  for  xterm
       to find these special keys in the terminal description.

       Starting with the curses convention that key names begin with “k” and that shifted special
       keys are an uppercase name, ncurses' terminal database defines  these  names  to  which  a
       suffix is added:

            Name   Description
            ───────────────────────────────────────────────────────────────
            kDC    special form of kdch1 (delete character)
            kDN    special form of kcud1 (cursor down)
            kEND   special form of kend (End)
            kHOM   special form of khome (Home)
            kLFT   special form of kcub1 (cursor-left or cursor-back)
            kNXT   special form of knext (Next, or Page-Down)
            kPRV   special form of kprev (Prev, or Page-Up)
            kRIT   special form of kcuf1 (cursor-right, or cursor-forward)
            kUP    special form of kcuu1 (cursor-up)

       These are the suffixes used to denote the modifiers:

            Value   Description
            ──────────────────────────────────
            2       Shift
            3       Alt
            4       Shift + Alt
            5       Control
            6       Shift + Control
            7       Alt + Control
            8       Shift + Alt + Control
            9       Meta
            10      Meta + Shift
            11      Meta + Alt

            12      Meta + Alt + Shift
            13      Meta + Ctrl
            14      Meta + Ctrl + Shift
            15      Meta + Ctrl + Alt
            16      Meta + Ctrl + Alt + Shift

       None  of these are predefined; terminal descriptions can refer to names which ncurses will
       allocate at runtime to key-codes.  To use these keys in an ncurses program, an application
       could do this:

       •   using a list of extended key names, ask tigetstr(3X) for their values, and

       •   given the list of values, ask key_defined(3X) for the key-code which would be returned
           for those keys by wgetch(3X).

PORTABILITY

       The “-x” extension feature of tic and infocmp has been adopted  in  NetBSD  curses.   That
       implementation  stores  user-defined  capabilities, but makes no use of these capabilities
       itself.

SEE ALSO

       infocmp(1), tic(1).

       The terminal database section NCURSES USER-DEFINABLE CAPABILITIES summarizes commonly-used
       user-defined  capabilities  which  are  used  in the terminal descriptions.  Some of those
       features are mentioned in screen(1) or tmux(1).

       XTerm Control Sequences provides further information on the xterm features which are  used
       in these extended capabilities.

AUTHORS

       Thomas E. Dickey
       beginning with ncurses 5.0 (1999)

                                                                                     user_caps(5)